Interactive Logon Failed On 64bit Windows 7
Jun 18, 2011
I recently bought a new asus laptop and after some issues with it i decided to format and clean install the OS. It came with windows 7 home premium 64-bit. I went out and bought windows 7 Pro 64bit and attempted an install. The installation went through smoothly til the end where I received the message "interactive logon has failed, please consult the event log ..." after this message it rebooted and attempted a start-up only to be met with a strange gray screen and then it reboots again.
Nothing else works like safe mode, or advanced boot options. Ive tried installing several times with with the same result. Now whats weird is that when I install a 32-bit version of this there's no problems, except that its designed for a 64 and runs slowly. So why would I be able to install a 32bit version of windows and not a 64 bit? Even though all the hardware is for a 64??
View 1 Replies
ADVERTISEMENT
Jun 18, 2012
I have a laptop which has stopped running since yesterday evening and gives me this error on a dialog box due to which I am not able to logon to the system. When I restart my machine, it gives me 4 options i.e.
Safe Mode
Safe Mode with Networks
Safe Mode using command prompt
Logon normally
I tried all 4 of them if atleast any of these allows me to login, but none worked. I referred to the solutions and fixes available on the internet, but all of them says that I need to press F8, enter into a safe mode and operate the issue from there. But even pressing F8 doesn't make any change.
View 1 Replies
View Related
May 25, 2012
So a while back I was watching a video and a pop up appeared and I it asked me if I wanted to download something and I clicked no. But that same pop up continuously appeared and I accidentally clicked yes. The computer froze so I forced shut down and whrn I tried to turn it on again, the BSOD appeared. It turned off a second time and then when it restared, the safe mode window appeared and I ran that and it tried to fix the problem but now whenever I try to get on, there is a black screen with a window that says" interactive logon process has failed. Please consult the event log" I click ok and I just appears again. There is no getting past it and I am unable to do anything on my. Computer.
View 4 Replies
View Related
Feb 9, 2011
I recently received a new ASUS Eee PC running Windows 7 Starter. It started fine the first 3 or 4 times I have tried to use it, but now, I am receiving this error message: "Interactive logon process initialization has failed. Please consult the event log for more details". I get the same message in safe mode, and the Repair Your Computer and Last Known Good Configuration options do not work. The computer has not created a system restore point, and I could not burn a system image due to lack of a burner (I have an external one on order).
View 3 Replies
View Related
Mar 22, 2010
I have a PC that dual boots both XP and 7. Yesterday, I restarted my computer to go from 7 to XP to play a game, all fine and dandy so far. When I came back onto windows 7, the Windows intro logo loads, disappears as usual, but instead of loading by desktop, I get :
"Interactive logon process initialization has failed. Please consult the event log for more details."
So I decided to go check my event log. I booted on XP, went to G:WindowsSystem32winevtLogs, copied the file : Application.evtx to my USB key, and opened it up on another Win 7 system to check it out. I thought I could find the error, but I can't get any logs out of the event log. The last entry being a month ago for some reason. I want to avoid formatting my Win 7 partition at all costs. Also :
- Safe mode doesn't work
- System restore doesn't work
- System repair doesn't work.
I've tried almost everything so far. I do in fact have complete access to my G: partition, which is my Windows 7 partition.
View 9 Replies
View Related
Apr 12, 2012
I have a HP Mini netbook with Windows 7 starter and when it boots up, the screen goes black, but flickers, and puts the computer into a sleep mode, where the power button light starts to blink. Sometimes the screen flickers enought so you can see a faint faded error message but the mouse cursor is unresponsive. When I press (not hold) the power switch, sometimes the display will turn on for 2-3 seconds but the mouse cursor/keyboard is still usually unresponsive. There's sometimes a error message that appears when the display is temporarily on that reads:"Interactive logon process initialization has failed"but the screen goes blank before anything can be clicked...The computer starts fine in safe mode, and with a minimal boot(sysconfig), but chkdsk, windows memory diagnostic, and startup repair are unable to find any issues.I recently booted into safe mode and uninstalled the display drivers via device manager, rebooted and it worked fine, I thought I fixed it, but when I shut down windows, windows finished installing updates and the problem started right back up again.
View 6 Replies
View Related
Aug 10, 2011
I am having trouble enabling this feature in Windows 7 Professional 32-bit. This setup is recommended by SquirrelSystems when installing Squirrel Professional 6.0 on a Windows 7 machineThe instructions from their techweb site follows...Quote: 1. Open the Windows Run command 2. Type: secpol.msc 3. Go to Security Setting/local Policies/ Security options4. On the right hand side find Interactive logon: do not display last username and change it to ENABLE The problem occurs after rebooting. I am no longer able to log in to the account in which I performed this step under. If there is a second account available I am able to log in fine but it seems the account in which I performed this step is now locked/corrupted.Changing the password via the Control Panel while logged in through my secondary account does nothing as well.
View 9 Replies
View Related
Jun 12, 2011
i need to logon to window 7 but there is a black screen written interactive logon process initialization has failed
View 2 Replies
View Related
Jul 13, 2012
I just did a clean install of windows 7 ultimate and I got this error before it booted into the desktop and my computer restarted and then logged into the desktop and all is working fine at the moment I've checked my logs and nothing is been reported there should I be woried or will it be ok
View 1 Replies
View Related
Jan 16, 2011
When I boot up I get to the sign in page .When I sign in I get the message: User Profile Service Failed To Logon and things go round in a loop, I can't get to the Start Menu.
View 6 Replies
View Related
Jun 29, 2012
Just finished uninstalling certain things I did not need any longer and when I was done I started to notice that my desktop items disappeared when I refreshed the desktop and My Computer complained about the location of login details. (I cannot remember the exact error) now when I restarted my computer I receive the error at the welcome screen saying "The User Service service failed the logon. User cannot be loaded". I've researched this error and many things talk about starting in safe mode which I have managed to do but nothing else seems to be clear from there.
View 3 Replies
View Related
Nov 28, 2011
I have just upgrdaed from windows 7 home to professional. I changed the computer name and rebooted, then I put the computer on the domain, and reboted. I can login as the donamenameadministrator I can login as: computernameackup admin account I can login as computernameusername
but when i try to login as: domainnameusername
i get the follwoinf error: The user profile service failed the logon
I have tried to look in the registery and there are no .BAK profiles. I delted all profiles. I am not sure why I cn log in to the domain as the administrator but not as the user.
View 1 Replies
View Related
Dec 20, 2010
I just built myself a new computer, and it turned out that the dual ram channel on the motherboard was faulty. I ordered a new motherboard and RMA'd the faulty board. When I installed the new motherboard, I received an error when trying to login to my old account: User group client failed the logon. Access denied.I am then returned to the login screen. Rebooting in safe mode didn't caused the system to hang a few times, but eventually brought me to the login screen, and I was able to get to the desktop and create a new user profile, and deleted the password from my old profile. Rebooted again and now I have access to the new admin account, but still get the error when trying to access my old profile. I did some research and people suggested changing the registry value GUID to GUID1 in the Windows NT/Profile List for the bad profile, but there is no "GUID" value under that profile.Windows restore doesn't find any restore points which is strange, because I made several in the week before I installed the replacement board as I messed around with settings and configured the machine.Now, I have full access to my machine through the new profile and everything is working perfectly, but I'd really like to be able to get my old login working again. There's a lot of files scattered around, games with saves tied to that profile, the odd install that I let install without checking "all users" on, etc. I -could- potentially migrate all that *** onto the new profile, but it would take time, time that I'd rather spend either with my son, or being conquered by the Aztecs in Civ 5.
View 5 Replies
View Related
Oct 3, 2011
I started to install a home network, but was interrupted. Now Windows 7 will not complete its startup except to say "access is denied." I did not start a recovery point before, hoping to get all the updates, etc. on before needing recovery. Is there any way to fix the problem without reloading everything?
View 9 Replies
View Related
Dec 14, 2011
I have the same issue the other user mentions. I can log on as a domain admin, but not as a domain user. There are only 4 profiles in the registry, with no .bak extensions:
1 is the default user
2 is the localservice account
3 is the networkservice account
4 is the local "Administrator" account
I was assuming the problem was with the default user, so I followed the article previously mentioned, and changed the RefCount from "1" to "0", and the State was already set to "0". I am still unable to log in with any domain account except for domain administrators.
View 2 Replies
View Related
May 20, 2012
One of my user accounts have been getting the error above after a shutdown.I tried system restore but it did not work.I have tried disabling non-windows service on startup and that didn't work.
View 9 Replies
View Related
Feb 20, 2013
I have been refused acccess to my laptop, message reads, The Group Policy Client Service failed the logon. Access denied. I am entering the correct password but i cannot log on
View 1 Replies
View Related
Nov 18, 2011
Whenever I try to install Windows 7 SP1 it fails. I've searched all over the web to find a fix and nothing has worked. I thought I'd come here since you guys always helped me with other issues.
View 4 Replies
View Related
Apr 28, 2012
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. Got "Page Failed to Load" error attempting to change my Windows 7-64bit display resolution. This used to work, but no more ( don't know what might have caused it). I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.
View 2 Replies
View Related
Oct 1, 2010
I have a system I have used for a while now and I actually reformatted a few months ago. The system has been working great with no problems but recently during a boot up I noticed an issue. Right when Windows begins its setup to take you to the login screen I noticed a bluescreen and a quick reboot. So I used F8 to boot from the last known good config, no change. I went and disabled the automatic reboot after a crash so I could read the error and it's the:
"Process1_initialization_failed" error.
I looked around for that error and found this: Fix: STOP 0x0000006B PROCESS1_INITIALIZATION_FAILED Blue Screen | The Windows Club
However, when I tried to get into the C: to remove that file, it said "Access Denied" and locked me out. I have yet to be able to get into the system since. To make matters worse I gave up and decided to just reformat the drive and start fresh. However, when I load up my Windows Installation DVD it is noticeably slow, it takes 5-10 minutes to go from step to step. So I got to the "Install" button screen, clicked it and it says "Setup is starting..." and then...nothing. It just stays on that screen for a long time, I gave it 30 minutes last night. So I'm unable to even reformat.
View 2 Replies
View Related
Dec 7, 2011
I'm working on a computer that appears to have gone through the "Windows Recover" virus/malware. The user appeared to do a good job of removing the virus and used System Restore to dial the system back about a week (which unfortunately is the furthest back the restore points go for some reason). Everything seemed to work except for the main users account, which had it's profile locations changed to something like c:usersTEMP.username-PC.000. It was pointing to this directory instead of the original directory. I then opened up regedit and found the entries atHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerShell Folders all pointing to the wrong folder, so I manually edited every entry to point to the correct folder and restarted.
This ended up working against me. When I logged into the account none of the shell folder shortcuts in the start menu would do anything when you clicked on them. The menu would stay up and it was as if I was clicking on nothing at all; no response.Instead of reversing the edits I had just made manually I decided to try using System Restore to revert the system back to the earliest date, which the owner of the PC said they had done themselves before I got there. I figured the worst that could happen would be it would be just as it was when I first looked at it.After performing system restore I can only log into the Administrator account.Every other account on the system produced the error message "The User Profile Service service failed the logon. The user profile cannot be loaded."
View 1 Replies
View Related
Sep 27, 2012
I've tried going into regedit and changing the RefCount to 0 and restarting but it keeps going back to 2 - it was at 3 originally but keeps reverting to 2 when I restart.
View 1 Replies
View Related
Sep 22, 2009
When trying to log onto my user account, i get this error.
"The user profile Service service failed the logon.
User profile cannot be loaded" Unfortantly this is the only account i have so i have no way to access my computer.
I am running Windowns 7 Ultimate 32 bit (non beta)
Any help please?
View 1 Replies
View Related
Apr 18, 2011
I just want to know how to create a user profile logon for the docked and undocked logon in Windows 7?
View 1 Replies
View Related
Feb 28, 2010
I WAS in 64 bit mode but had a system failure and had to reinstall.Since then I haven't been able to install in 64 bit mode. No matter what I try it always installs the 32 bit version.I've even re-partitioned my hard drive in order to get a completely fresh install. But nothing seems to work.Windows "knows" my system in 64 bit capable. In the Control Panel - View basic info about your computer it shows my processor as "AMD Athlon 64 X2 Dual Core Processor 4600+ 2.4 GHz".Is there a way coerce a 64 bit install?
View 3 Replies
View Related
Feb 24, 2011
In the tray at the bottom right of the screen where the wireless signal strength indicator thingy sits I now have a blue circle. Sometimes I get an orange star where there used to be a white histogram.The computer still connects to the Internet but if I right click on the icon the icon will change to a plug and a red cross.If I open Network and Sharing Centre I see the message in the title to this post.As I type I now have "Not connected - Connections are available" in a box above the tray but I AM still connected.
View 2 Replies
View Related
Jul 17, 2012
i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies
View Related
Oct 19, 2012
I use W7 + SP1. I tried to update my Apli Master 6 program but for some reason it did not install properly. I tried to uninstall the partly installed program but this failed to happen. Now, I keep getting a pop-up notice from the ISD with a 'runtime error' message. I tried to stop the ISD by going to C/Control Panel/Admin Tools/Services/ Interactive Services Detector and stopping it. However it keeps reappearing with the same message, and will not stay "Stopped." How can I disable it completely?
View 4 Replies
View Related
Jan 11, 2013
I accidently screwed up the administrator account and once, i tried to install a software and it came "You need a administrator password to proceed"so i typed it then it came the error"this user has not been granted the requested logon type at this computer i tried a lot but its still not working and i cant install anythin.
View 5 Replies
View Related
Jun 12, 2012
Every time I try to get administrative access, I type in the password and it says, "There are currently no logon servers available to service the logon request." I'm able to sign in as the administrator, it's just when I need to gain administrative access that this error pops-up.
View 2 Replies
View Related
Mar 29, 2012
now I get this message: interactive services detection for ntvdm.exeI searched through Microsoft answers and it recommended that I can stop it from services window,so I did that and now the message doesn't pop up(should I stop it?is gonna make problems because I stopped it?)but I know there is a problem because it began to happen after my update and I didn't get the message before the update.(I have my driver back ups before the update should I restore them?)
View 1 Replies
View Related
