Below error has been keep popping in Windows 7 Event Viewer whenever I bootup my system, I had even format my system drive and it still happening.I also have observed that now my PC took a little while more to load.The WinRing0_1_2_0 service failed to start due to the following error:The system cannot find the file specified.Attached is the screenshot of the error.
View 14 RepliesI finally got a new laptop after almost a year of struggling with my old one. I've had experience with using homegroup in the past and was thinking maybe I could access some of my files on my old laptop through that so I don't have to go through the trouble of manually transferring everything via flash drive and what not. I seem to be running into a problem though, my old laptop seems to be in its own homegroup I guess. Whenever I try to leave it, it says "windows cannot remove the computer from the homegroup".
I researched the problem, and used the troubleshooter which said that the homegroup provider service wasn't started and it couldn't be fixed automatically. I tried restarting starting the service but got that error 1608 thing. To bypass this I've tried joining whichever group my old laptop is in, but it can't seem to be found even though the two are both on the same wifi/network. If it matters, the new laptop is windows 8 and the one I'm having trouble with is windows 7.
I have the problem that the service WLAN Auto-Config isn't started. When I try to start the service manual then the error 1068 appear: "Error 1068: The dependency service or group failed to start." I have tried the three steps of onopko, but this is not working to my computer. On advice of StalkeR I have add the reg files of Black Viper site as Safe as well default. Every time I have restarted my computer after adding the reg files, but both files are resolving me problem.
View 1 Replies View RelatedI have a Dell XPS M1730 with Windows 7 Ultimate and it was doing an iTunes update and the lid got closed during the update process. Now when I start the computer up it says "the user profile service service failed the login, user profile cannot be loaded". The computer starts up in safe mode and won't let me do a system restore because it says it is shut off.When I look at User Profiles in Windows 7, it states that the users profile is as backup and the default profile is the local profile. How can I fix my computer to get my user profile back up and working?
View 1 Replies View RelatedI'm having a pretty big problem on my laptop- I can't connect to the internet and when I try to connect in the network and sharing centre it simply says 'The dependency service or group failed to start' and I am unable to connect to the internet (Using wi-fi). There's a lot more to it than that though. Simply put, here is a list of the problems I am facing:
1. Can't connect to the Internet
2. Cannot change theme, stuck in basic (Themes are grey and do not respond when I click on them in the control panel)
3. Overall brightness of laptop screen has decreased.
4. When opening my anti-virus software (avast) it says that the software is off and I should click the fix now button to turn it on. However, when I click on it nothing happens.
Please note that this problem occurred when I was messing around with command prompt ( I booted windows 7, pressed F8 and tried to check weather I could launch a USB program through safe mode- command prompt). I figured out I had no idea what the commands were and tried using one of the few commands I knew- ms config. I may have changed settings there and this could be how it happened, I'm not really sure. I'm not very experienced with command prompt but have full knowledge of control panel options, computer, etc.
After I downloaded some windows 7 updates I now get this error:[URL]
- When I turn the computer on windows takes a long time to load, about 5 times longer than usual
- My keyboard now does not work (tried others to be sure)
- I have no internet now (this is related to the error, I have read other cases)
The first thing I wanted to try was the winsock reset, but I do not have a keyboard to type with in the command prompt.I have:
OS: Windows 7 home premium 64bit
MOBO: AsRock z77 Pro4-M
In the tray at the bottom right of the screen where the wireless signal strength indicator thingy sits I now have a blue circle. Sometimes I get an orange star where there used to be a white histogram.The computer still connects to the Internet but if I right click on the icon the icon will change to a plug and a red cross.If I open Network and Sharing Centre I see the message in the title to this post.As I type I now have "Not connected - Connections are available" in a box above the tray but I AM still connected.
View 2 Replies View RelatedI am currently running Windows 7 Ultimate x64 and one morning, my audio stopped working. I discovered audio stopped working because the Windows Audio Service, which relied on the Windows Audio Endpoint Builder service, which relied on the Power service, all stopped working. So to solve my audio problems, I must first start the Power service.However when I try to start it, it gives the following message:Windows could not start the Power service on Local Computer.Error 127: The specified procedure could not be found.
View 3 Replies View RelatedWhen you boot you get the login screen, click login, then instantly displayed with this message:"User Profile Service service failed the login.User Profile cannot be located."You cannot log into windows normally or in safe mode, I don't use the PC as its someone else's so I don't have any other information as they don't know either they just turned it off and this is what happened when they turned it on.
View 14 Replies View RelatedI've tried going into regedit and changing the RefCount to 0 and restarting but it keeps going back to 2 - it was at 3 originally but keeps reverting to 2 when I restart.
View 1 Replies View RelatedWhen trying to log onto my user account, i get this error.
"The user profile Service service failed the logon.
User profile cannot be loaded" Unfortantly this is the only account i have so i have no way to access my computer.
I am running Windowns 7 Ultimate 32 bit (non beta)
Any help please?
I have created a service using the following command in cmd prompt:sc \computername create servicename binpath= C:WindowsSystem32sam.exeThen in the service list, I could see my service.When I right clicked on the service and clicked on Start , I am getting a pop-up with the following error: Windows could not start the newservice4 service on Local Computer.Error 1053: The service did not respond to the start or control request in a timely fashion.
View 2 Replies View RelatedI am getting an error message which states:ERROR: unable to start the Bluetooth Stack Service. How do I fix this?
View 1 Replies View RelatedI recently got a virus on my PC and managed to get rid of it. I was using TDSS killer and it somehow removed my svchost.exe -k netsvrs file from registry and I am almost positive this is why I cannot start it. Although I do not know how to fix it. I am running windows 7 ultimate x64.
View 6 Replies View RelatedI keep getting this box telling me "Error:unable to start blue tooth stack service".Also unable to open certain Web pages.
View 4 Replies View RelatedI have a program running that automatically syncs some of my data online. It is running on a computer with Windows 7 Pro as well as a Windows Server 2003 that I use as for file storage. Unfortunately it does not startup until I log into a profile, but since I don't really use these computers, sometimes this doesn't happen for days on end. I decided to create it as a service (used the sc.exe utility - sc create DataBackup binPath= "C:Program FilesData Deposit Boxackup.exe" DisplayName= "Kineticd Backup" start=auto). The service was created successfully, but when I try to start the service, I get the following error.
Error 1053: The service did not respond to the start or control request in a timely fashion
How can I get into my laptop? I have a Windows failed to start error message. Asking me to inser my windows installation disc which didn't come with laptop
View 2 Replies View RelatedOn July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.
My Event Viewer is peppered with:
Event 7003, Service Control Manager
The DHCP Client service depends the following service: Afd. This service might not be installed.
Event 7001, Service Control Manager
The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not exist or has been marekd for deletion.
And that keeps repeating many times in a minute (about 30-40 cycles of it).
I am running Windows 7 Ultimate x64, and have been for years. I have had no problems previously that I was unable to fix.
This morning when starting up my pc I got the error message "Failed to connect to a windows service" In addition it has defaulted to windows classic theme and I can not re enable Aero.
I looked at the Event log but it is simply beyond my level of understanding how to address the errors. Also all errors shown seem to be relativity longstanding/ recurring.
WLAN AutoConfig service gives error 1067 when trying to start it. What I've tried:
Reset winsock settings
Ran SFC /scannow
Did system restore
Uninstalled and reinstalled drivers
I tried all of these in normal mode AND in safe mode. None of it worked. Then i thought the service dll (C:Windowssystem32wlansvc.dll) itself might have been damaged/outdated, so I decided to delete it and put a new one from donor pc. NOPE.It wouldn't give me access to the file. No matter what i tried, safe mode, unlocker tools, auto rename it on startup, doing everything in administrator or even messing with permissions under file properties. It just wouldn't give me access to the file.Wi-Fi was working smoothly few days ago and i literally have no idea why it stopped working.
Specs:
Windows 7 Professional 32-bit
Sony VAIO VGN-SZ340P
3945ABG Wi-Fi card
I have a sony vaio laptop when i start up my computer i get " ERROR unable to start the Bluetooth stack service" what is this?
View 3 Replies View RelatedWhen i try to activate my copy of windows 7 ultimate i get the following error message: "Code error:0xc004E003. Description: The Software Licensing Service reported that license evaluation failed"
Here are some basic info of my pc:
450 @ 2.20GHz, x64 Family 6 Model 22 Stepping 1 Processor Count: 1 Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Ultimate , 32 bit Processor: Intel(R) Celeron(R) CPU RAM: 1014 Mb Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb Hard Drives: C: Total - 152624 MB, Free - 18127 MB; Motherboard: ASUSTeK Computer INC., P5KPL-VM-MUSTEK-SI, x.xx, MS1C92D09200022 Antivirus: avast! Antivirus, Updated
Yesterday I came home from work to a black screen that said "Error Loading OS". Not sure how this happened, so I restarted it and it came right back to that. Spent a few minutes digging around and found out that my hard drive was not set in the BIOS as a boot drive (although no idea how that changed), so I switched it back and the computer booted fine.Today, I come home from work and again, I see the black screen that says "Error Loading OS". I restarted, went in the BIOS, and saw that of 4 hard drives in the system, only 1 (non boot) showed up. This is weird. I shut down for a few minutes, booted it back up to the BIOS, and my primary hard drive was listed again. Selected that, and Windows booted up fine.
Was using the computer for about an hour when everything just froze. The mouse still worked and moved, but nothing else at all was working. So I restarted again, and I got to a "Windows failed to start" / 0xc000000f error. Off to the BIOS again, where again, only 2 or 3 of my 4 hard drives were listed. I shut down, left it for a few minutes, rebooted back, and selected my primary drive again. Then I went ahead and created an image of my primary drive just in case.I have no idea wh thought it might be a hard drive failure, or it could be something messed up in my motherboard. I have a 64GB Crucial M4 SSD drive that is less than a year old, along with an ASRock Z68 PRO3 motherboard that was bought at the same time.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6037 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 454779 MB, Free - 395876 MB; D: Total - 21855 MB, Free - 2354 MB;
Motherboard: Hewlett-Packard, 1819
Antivirus: Norton Internet Security, Updated and Enabled
Printer HP Photosmart 5514 B111h / Network Status: Ready / Active Connection Type: Wireless
error 1053: The service did not respond to the start or control request in a timley fashion Also before a message / Windows cannot connect to the printer. The local print spooler service is not running. Please restart the spooler or restart the machine. Does this mean to connect a USB cable and reconfigure the wireless connection.
I am unable to connect to the Internet on wireless home network.I have carried out the following:'Click Start, type services.msc, then press Enter. Scroll down to "WLAN AutoConfig" and right click on it and select Properties. Set it to Automatic and not Disabled, and press the Start button, then click OK.That should start the service.'I received the following message:"Windows could not start Wired AutoConfig Service on local computer.Error 1068: The dependency service or group failed to start."
View 1 Replies View RelatedOkay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it
View 14 Replies View RelatedThe error message: the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details.the event logs of the error:
theres 3 errors:
1/3:
Activation context generation failed for "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorNVMonitor.exe".Error in manifest or policy file "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorMicrosoft.VC80.MFC.MANIFEST" on line 4. Component identity found in manifest does not match the identity of the component requested. Reference is [code].....
i have an intel core i7 running 64 bit if that makes a difference.
A friend who has an Aspire One with Windows 7 Starter asked me to help, his computer wouldn't boot. It would go through the bios part of the boot and then very quickly it would show an error saying "ynhif is compressed" and stop there. The error would come up so fast it was as if Windows wasn't even trying to boot. There was none of the normal Windows startup screens. There was nothing I could do to boot the machine. I couldn't get to the list of boot options. This problem was happening way before one could get that list in the startup process.
I booted off an AVG antivirus rescue disk cd and checked the system. There were no viruses. That disk allowed me to use a simple file browser and editor. I could see a file named ynhif with no file extension and a file size of around 233kb. It was modified at the same time that Windows 7.ld was modified.
I googled heavily but couldn't find anything about a file named vnhif. I didn't know what to do so on a hunch I just renamed the file to ynhif.old and the system booted right up.
Does anyone have any idea what ynhif might be from and how it got there? I looked into it with a text editor and looked like it was some kind of boot file, with references to linuxey stuff and thing about booting.
I've been trying to change the motherboard and cpu in my current computer. After hooking everything up, the computer runs till the windows 7 loading screen, then stalls and restarts. Upon restart I'm brought to the "windows has failed to start" message and attempting to repair through that yields no results. I hooked my old parts back up to make sure the hard drive was still good and it is. With the old parts everything boots normally.
The new parts I'm putting in are;
-AMD fx 6 core 3.3ghz processor
-Asus M5A97 motherboard
Problem Event Name: Startuprepairoffline
problem signature 1: 6.1.7600.16385
problem signature 2: 6.1.7600.16385
problem signature 3: unknown
problem signature 4: 21200975
problem signature 5: autofailover
problem signature 6: 2
problem signature 7: bad driver
OS Version: 6.1.7600.2.0.0.256.1
Local ID: 1033
After a factory reset and clean installation I am looking in to a few remaining errors that are reported.
One such is Quote: Session "Homegroup Log" failed to start with the following error: 0xC0000035
System
- Provider
[ Name] Microsoft-Windows-Kernel-EventTracing
[Code].....
I booted my computer this morning and I could tell that something wasn't completely right. It took an incredibly long time to get to the user account selection, didn't play the startup sounds, and when I finally log in, the Windows Aero theme had been set to the classic one similar to Windows 2000. I tried to restart the computer and it couldn't do it because it was waiting for the log off sound, which wasn't playing. I clicked force restart and the computer just sat at the desktop. After a hard reboot, I started Windows normally and in the lower right corner I got a message saying that Windows failed to connect to a Windows Service.
View 1 Replies View Related