"Windows Has Failed To Start" Error After Installing New Parts?
Jul 18, 2012
I've been trying to change the motherboard and cpu in my current computer. After hooking everything up, the computer runs till the windows 7 loading screen, then stalls and restarts. Upon restart I'm brought to the "windows has failed to start" message and attempting to repair through that yields no results. I hooked my old parts back up to make sure the hard drive was still good and it is. With the old parts everything boots normally.
The new parts I'm putting in are;
-AMD fx 6 core 3.3ghz processor
-Asus M5A97 motherboard
Problem Event Name: Startuprepairoffline
problem signature 1: 6.1.7600.16385
problem signature 2: 6.1.7600.16385
problem signature 3: unknown
problem signature 4: 21200975
problem signature 5: autofailover
problem signature 6: 2
problem signature 7: bad driver
OS Version: 6.1.7600.2.0.0.256.1
Local ID: 1033
How can I get into my laptop? I have a Windows failed to start error message. Asking me to inser my windows installation disc which didn't come with laptop
I tried installing Windows 7 64 bit OEM on a fresh hard drive but it kept crashing and now when I try booting the system seems to think Windows is installed saying ''Windows failed to start'' in boot manager. I even tried loading the computer up with a different hard drive but it STILL says that!
Yesterday I came home from work to a black screen that said "Error Loading OS". Not sure how this happened, so I restarted it and it came right back to that. Spent a few minutes digging around and found out that my hard drive was not set in the BIOS as a boot drive (although no idea how that changed), so I switched it back and the computer booted fine.Today, I come home from work and again, I see the black screen that says "Error Loading OS". I restarted, went in the BIOS, and saw that of 4 hard drives in the system, only 1 (non boot) showed up. This is weird. I shut down for a few minutes, booted it back up to the BIOS, and my primary hard drive was listed again. Selected that, and Windows booted up fine.
Was using the computer for about an hour when everything just froze. The mouse still worked and moved, but nothing else at all was working. So I restarted again, and I got to a "Windows failed to start" / 0xc000000f error. Off to the BIOS again, where again, only 2 or 3 of my 4 hard drives were listed. I shut down, left it for a few minutes, rebooted back, and selected my primary drive again. Then I went ahead and created an image of my primary drive just in case.I have no idea wh thought it might be a hard drive failure, or it could be something messed up in my motherboard. I have a 64GB Crucial M4 SSD drive that is less than a year old, along with an ASRock Z68 PRO3 motherboard that was bought at the same time.
Below error has been keep popping in Windows 7 Event Viewer whenever I bootup my system, I had even format my system drive and it still happening.I also have observed that now my PC took a little while more to load.The WinRing0_1_2_0 service failed to start due to the following error:The system cannot find the file specified.Attached is the screenshot of the error.
I finally got a new laptop after almost a year of struggling with my old one. I've had experience with using homegroup in the past and was thinking maybe I could access some of my files on my old laptop through that so I don't have to go through the trouble of manually transferring everything via flash drive and what not. I seem to be running into a problem though, my old laptop seems to be in its own homegroup I guess. Whenever I try to leave it, it says "windows cannot remove the computer from the homegroup".
I researched the problem, and used the troubleshooter which said that the homegroup provider service wasn't started and it couldn't be fixed automatically. I tried restarting starting the service but got that error 1608 thing. To bypass this I've tried joining whichever group my old laptop is in, but it can't seem to be found even though the two are both on the same wifi/network. If it matters, the new laptop is windows 8 and the one I'm having trouble with is windows 7.
Okay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it
I have the problem that the service WLAN Auto-Config isn't started. When I try to start the service manual then the error 1068 appear: "Error 1068: The dependency service or group failed to start." I have tried the three steps of onopko, but this is not working to my computer. On advice of StalkeR I have add the reg files of Black Viper site as Safe as well default. Every time I have restarted my computer after adding the reg files, but both files are resolving me problem.
A friend who has an Aspire One with Windows 7 Starter asked me to help, his computer wouldn't boot. It would go through the bios part of the boot and then very quickly it would show an error saying "ynhif is compressed" and stop there. The error would come up so fast it was as if Windows wasn't even trying to boot. There was none of the normal Windows startup screens. There was nothing I could do to boot the machine. I couldn't get to the list of boot options. This problem was happening way before one could get that list in the startup process.
I booted off an AVG antivirus rescue disk cd and checked the system. There were no viruses. That disk allowed me to use a simple file browser and editor. I could see a file named ynhif with no file extension and a file size of around 233kb. It was modified at the same time that Windows 7.ld was modified.
I googled heavily but couldn't find anything about a file named vnhif. I didn't know what to do so on a hunch I just renamed the file to ynhif.old and the system booted right up.
Does anyone have any idea what ynhif might be from and how it got there? I looked into it with a text editor and looked like it was some kind of boot file, with references to linuxey stuff and thing about booting.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
The error message: the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details.the event logs of the error:
theres 3 errors: 1/3: Activation context generation failed for "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorNVMonitor.exe".Error in manifest or policy file "C:Program Files (x86)NVIDIA CorporationNVIDIA System MonitorMicrosoft.VC80.MFC.MANIFEST" on line 4. Component identity found in manifest does not match the identity of the component requested. Reference is [code].....
i have an intel core i7 running 64 bit if that makes a difference.
After a factory reset and clean installation I am looking in to a few remaining errors that are reported.
One such is Quote: Session "Homegroup Log" failed to start with the following error: 0xC0000035 System - Provider [ Name] Microsoft-Windows-Kernel-EventTracing
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD cmdGuard cmdHlp CSC DfsC discache ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
A few days ago, I started having trouble with Dell Latitued D800, Windows 7. First, Windows would not boot up. I was able to boot windows using the F12 option. When Windows loaded, the screen display had shrunk and was centered with a black perimeter. I contacted the guy that sold me the computer and he suggested that I check the boot sequence for the boot issue. That worked fine. To resolve the resolution issue, I was advised to select the "last known good configuration" from the F8 options. After I did that, the Windows Error Recovery Screen. A Recent Hardware Or Software Change May Be The Cause. I attempt to start windows normally.
When I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives
When I last shut down my HP Mini 110 netbook it began installing updates, which is normal now and again.When I switched it on the next day it comes up with a black screen saying Windows Boot Manager:Windows failed to start. A recent hardware or software change might be the cause... It goes on to tell me to insert my windows installation disc but netbooks dont have diskdrives!Also says The boot selection failed because a required device is inaccessible.
I have had problems booting up my Toshiba laptop. (Windows 7 Ultimate 32 Bit) When i would start my computer, Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert you Windows installation disc and restart your computer.2. Choose your language settings, and then click "Next.3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc000000e Info: An error occured while attempting to read the boot configuration data. tried to solve the problem using repaire methods such as :At the DOS prompt type the following three commands:bootrec.exe /fixmbrbootrec.exe /fixboot (may return an 'Eliment not found' message)bootrec.exe /RebuildBcdI also deleted the BCD parition or it's related to it which is 100Mb in size ,
I left my 160 GB hard disc unused for 1 month.It was installed with Windows 7 ultimate.But now it says unable to start windows. I have another 1 TB hd. i can boot from this and my 160 GB still works as a memory storage. Its only problem is that it is unable to boot.I think if i install a new copy of window it will work.but i need to know why it was happened when 160 GB hard disc was not in used for a long time and any other way to recover it.
I'd had some problem with my laptop the last few days, what I believed to have happened is my laptop (Dell inspiron n5110) which is windows 7, was doing a configuration, but because of my bad connection, my internet dropped. It was stuck at 15% for 3 hours so I turned it off as it was about to run out of battery. It had some problems loading and starting up but they went after a day. but 1 day later I am booting up and I get a black screen.
I have a serious issue, this all started when i tried to update my bios and had some how screw up my os. I tried startup repair failed system restore failed and safe mode failed also. What should i do now?
A recent hardware or software change might be the cause to fix the problem: 1. Insert Windows installation disc and restart your computer, 2. Choose language settings/NEXT, 3. click repair your computer. If you do not have this disc, contact system admin or computer manufacturer. status OXCOOOOOOf the boot seletion failed "a required device is inaccessible
I went to use the rest room. I come back and he had spilled his juice inside my machine. I lost video and the fan on my brand new 7770 was stuck on max rpm. I turned everything off, took out the gpu, cleaned it, let it dry. Let the rest of the computer dry. I reinstalled the GPU and turned on my machine. The fan was no longer stuck on max RPM, so I felt I dodged a bullet. However, windows failed to start. It continually fails to start. I tried an older GPU (9500 GT). The fan on it would, for some reason, not spin, but I saw the model come up when I started the PC. Windows wont start. Initially I believed my problem was limited to a shorted GPU and I don't mind buying another new one, but since I was unable to get my old GPU to work I'm worried something else has shorted.
my laptop won't start up-it reads, "Windows failed to strt. A recent hardware or software change might be the cause. I don'thave installation disc--if I did have it,m it's lost. I was terying to download a TV show from a website and i THINK I ruined my computer.
today my computer failed to boot up, I got a message stating that Windows 7 failed to start up. It was working perfectly fine the day before, I have no new installed software, applications, or hardware. So first I went through the "repair" process however it failed also and yielded no fix, I tried this activity several times to no avail. Then I began to test my hardware I removed one of my graphic cards and all but one stick of RAM and only connected one Hard drive. I went through the boot process with no motherboard errors, however I still got the same "failed to start up" warning. Running out of ideas and swapping hardware like a mad man, nothing seemed fix the problem.
After these failed attempts I decided to put the Windows 7 installation disk into the drive and see if I could run that and repair, or essentially put a fresh install onto my hard drive. Unfortunately for some reason when it prompts me to "hit any key to to boot from DVD" it doesn't record my keystroke and immediately brings me back to the original message of "failed to start up".So here I am running Ubuntu from a USB flash drive and all my hardware is reported accurately and is running like a top. Now, I can re-format the hard drive as NTFS through Ubuntu but I have a couple of questions: 1. my Original Windows 7 install has been on a 500 gb partition from a 1tb drive, I can format just the partition through Ubuntu but not sure if that will translate over when I attempt to reinstall windows.2. Why isn't my keyboard being able to press "any key" to boot into the windows install disc?
I'm very new to PCs, I just built this rig back in July and I've just run into my first "problem". I was sitting here reading the paper when my PC randomly shut down. When it started back up, it brought me to a black DOS screen that said:"Windows failed to start. A recent hardware or software change might be the cause.1. Insert your windows installation disc and restart your computer.2. Choose your language settings, and then click next.3. Click repair your computer.If you do not have this disk, contact your system administrator or computer manufacturer for assistance.Status: Status:0x000000e Info: The boot selection failed because a required device is inaccessible"So I did what it suggested and inserted my Windows 7 disc and ran repair. Repair couldn't do anything. It told me to contact my system administrator or hardware manufacturer.
So I opened my chasis and removed unplugged both of my HDs (OCz 120GB SDD and WD 2TB HDD) and plugged them back in. I booted up again and removed the Windows 7 disc. Now I had a black screen telling me something like "Define your boot disc in BIOS or insert media". That isn't verbatim, I should have wrote it down. Sorry. But I went into my BIOS and went to the Boot tab. I only saw two boot methods! OCz as no. 1 and Atapi as no. 2! Shouldn't Western Digital be there too (at least as a choice?) well I didn't see it.I switched Atapi to no. 1 and OCz to no. 2 (as if that would do anything) and that black screen about setting your boot method came up and I think I figured out it was looking for my Windows 7 disc. So I put it in and entered a key. The install menu came up, I clicked repair and this time it wasn't finding my Windows 7 installation at all! I started to panic because I thought both of my HDs had been wiped. I ran repair again. Did nothing. I went back into BIOS and put Ocz back as no. 1 and disabled no. 2 (Atapi) and amazingly, my computer started up.
I think that im facing the biggest pc prob of my life,Cz my windows has a major fail to start up , all safe modes and memory test do not work.I tried to repair it with the original cd of my windows, gess what, after loading windows files the screen goes black and nothing happens.all antivirus rescue bootable cds dont find a thing.
i just bought this new mouse razer lachesis 5600..when i plugged in the mouse, install the driver, it went ok, no problems at all.the problems start when i reboot, the screen just freeze at the motherboard screen (MSI 890fxa-gd70)..i remember reading from this forum, to try unplugged all usb device, i did that, and my pc can boot normally.. mouse also have no trouble if i plugged it after i got on windows.. but everytime i reboot with mouse plugged in, it always freeze at the mobo screen..or i should unplugged my mouse everytime i want to reboot?
My problem is that on occassions say every 2nd or 3rd start-up my laptop states that Windows failed to start-up properly, and gives me the option of repair or start windows normally So as the recovery states on screen is recommended this is usually the route i take but i have also run start as normal which gets me going. this is maybe not as serious as other posts I've read but it's becoming very frustrating, my laptop is a Lenovo G575 and i'm running windows 7 home premium.[code]
