Change Default Software Installation Path?
Dec 17, 2012
I just built a new computer which includes a SSD and Hard Drive. I plan to use my SSD for only Windows 7 and my Games. I plan to install all other applications on my hard drive therefore I am trying to change the default software installation path from C:ProgramFiles to E:ProgramFiles. I have been following Microsoft's tutorial that says to change the key found in HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows CurrentVersion but that did not work as I am still getting the original installation path.
View 1 Replies
ADVERTISEMENT
Jun 26, 2011
I have a computer with three partitions, the first with 100GB exclusively to Windows 7 (already installed), a partition for applications and another partition for personal files (photos, text, music, movies, etc.). I wonder how to configure the location of "My Documents", so that all users have only their personal files on drive of personal files. In Windows Explorer changed in each of the users the location of the Documents, Music, Video and Pictures.
- After changed the location of the folders above, there is still the same folders in C:users , and there are user settings that are there defined, eg Desktop, in C:Users. Is there any way to move all settings and folders to another drive?
- Is there any way to do this operation automatic? for future users I will have to repeat the same operation, how can I indicate that all future users will have their settings and documents specified in this specific drive?
I installed some applications and found that some applications did not demand that the location where it was set to be installed the application, having been installed in C:users and C:Program Files, intended that all applications (except for windows and Office) were installed in drive applications. How do I specify that this is the default drive for installation applications? Keeping the installations of Windows + Office in this drive. Applications installed by the administrator are available for all users or must be given access to other users ? How done? In the drive file, which should contain the users and shared files, meant that each user only gets access their documents and shared. Where and how can make this configuration?
View 3 Replies
View Related
May 5, 2009
Is there any way I can change the default install path for programs away from my system drive? It's getting kind of annoying having to change it manually every single time I install something.
View 9 Replies
View Related
Sep 30, 2011
TrendMicro Titanium Maximum Security 3 user( Tried their on line chat dropped 3 times different days, Agh )Wants to install directly to SSD C: drive,want to install on 1TB HD ( Partioned to D: E: F want on D: with all other programs.Does not offer an option to install anywhere, just default install on SSD,
View 3 Replies
View Related
Nov 2, 2011
I'm in charge of security and fixing problems on my grandma's two computers. She typically installs several hundreds of games on her computers. I would prefer her to install the games to "c:\program files\games" rather than "c:\program files" as that folder ends up getting so cluttered that I can't tell what's in there. Is there a way to change the default installation location from "c:\program files" to "c:\program files\games"? She's too lazy to change the location manually when she installs software, so it would be nice just to change the default location, but I'm not sure how to do that on Windows 7
View 1 Replies
View Related
Apr 19, 2012
Everytime i download something it goes directly to my hard drive :E and i want it to go to my C: and i have tryed the browser settings but it doesnt work I am using Windows 7 Home Premium 64 bit
View 2 Replies
View Related
Oct 24, 2011
I was having probs installing Office 2007 a while back and whilst using 2 forums for help to resolve the issue, one of the things i had to do was (i think) change the default install path for when i'm installing new programs. The 2 links for the help pages i was using are: Office 2007 Install Error 2203 - Office Setup Error 2203. An Internal Error has occurred.
The problem i've created is that now i'm unable to apply most updates for the programs that are currently installed (and thus on shutdown it always tries to apply updates, that fail) and also, i'm not able to install and new programs.
View 2 Replies
View Related
Aug 21, 2011
I find it folly to install my applications on the C drive, especially the larger applications. Doing so makes the C drive so large that it is cumbersome to make the image backups that I think are necessary to insure an easy recovery from any problem causing a failure to boot. In WinXP, there is an easy way to change the default install location by changing ProgramFilesDir at HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows Current Version. I changed that to a specific folder on my D drive and have used that for the last 8 years with no problem. It appears this registry key is only used by install programs to let them know where you want your programs installed.I really miss this wonderful feature in windows 7. Actually windows 7 has the same registry key, but unfortunately it does not seem to be used for the same purpose. I'm not sure exactly what it does, but at least for some programs, Windows seems to use it as a path to find the program when it is to be executed. Of course that would make little sense because there would be no way to actually change the key without breaking something. (What sense is there in having a registry key that can't be changed?). I have tried changing this key on two different systems and eventually it did lead to problems on both systems. So now I'm back to laboriously changing the path from C:program files or C:program files (x86) every single time I install an application (which it turns out I do quite often).
Is it possible that a script could be developed to search for C:program files or program files(x86) in an edit box and replace it with my preferred path with a single hot key? That would at least take most of the drudgery out of it, although it would still require choosing the "custom" install on many applications, not to mention the occasional errant applications that always install to the default install path with no chance for user intervention.
View 3 Replies
View Related
Jul 26, 2011
I want to know if this is possible, I want by default have users data safe on to a different drive, so basically when I create a user, their Music, pictures, goto U<USERNAME> but their appdata folders and stuff stay on C drive, like this they will be able to login if something happens to external drive, also like this data is backed up! I use WIin7 Ultimate
View 5 Replies
View Related
May 21, 2012
I have acer 3830TG laptop.I have deleted my path variable accidentally .Now I repair it by default path variableBUT what about my priveous original path ?Is my syatem works as previous ?what about graphics path,bluetooth etc
View 2 Replies
View Related
Jun 13, 2011
Testing a windows 7 setup and have problems with the default save as/ open location not defaulting to the users home area. It goes to the desktop insteadI have done thefollowinn group policy go to User Configuration AdministrativeTemplatesWindowsComponentsWindows ExplorerCommon Open File DialogClck ontems displayed in Places Bardd your Save Location. for example \myserverusers est\%USERNAME%i have put the setting in number 1 and i does not work, i have put it in all 5 and still does not work, i have tried just
View 1 Replies
View Related
Feb 3, 2013
I did a clean install of windows 7 pro using sysprep to move my user files and program data to other drives. This works well as I only have a 120gb SSD running Windows 7 and a partition for Win 8 Pro that I haven't installed yet.
I changed the default installation path from c: to s: in both the 32/64 bit registry and now some of the programs (photoviewer, media player, defender) won't run. I've fixed the programs that I could, pointing those back to c: as I did not move any of the programs that comes with windows.
View 5 Replies
View Related
Sep 23, 2011
accidentally deleted the default system variable path in windows 7 64 bit in sony vaio vpcea15fg.....find me a sol...
View 1 Replies
View Related
Nov 5, 2009
I am running Win7 HP 64 bit and have noticed that when i install 32 bit app, the default installation path ins C:Program files (x86)... Will changing this make any difference ie: instead of installing to this location to change it to C:Apps or C:games etc
View 5 Replies
View Related
Jun 12, 2009
How to Change the Default Operating System to Start in Windows 7 ?
View 0 Replies
View Related
Nov 4, 2012
Ok so here's a little backstory before I jump into my problem. I've got 2 harddrives installed; a SSD and a regular HDD. The SSD is labeled C: since it has Windows and other core programs while the HDD is labeled B:. The solid state is almost full while the regular one still has over a terabyte of space left to fill up. Normally, I have no problem installing new programs or games to the HDD till now.When I went to install my new game on B: it kept giving me invalid directory errors. So I went to the game's forums and discovered that the reason that issue was happening was because the game recognized drive letters A and B as floppy drives as opposed to hard drive letters. Further investigation revealed that apparently this little bit of design is hardcoded into the game and there really isn't any work around except changing the drive letter. So I looked up how to do so and made the change.....then the problems started.After changing the drive letter from B: to Z: I kept getting 'path does not exist' error message with features and hardware connected to Windows on C:.
For example, my DVD-ROM drive is labeled D: and everytime I tried to install the game after the drive letter change I got 'D:\, path does not exist. make sure the path is correct and try again' error. Another example, when trying to go to Device Manager to start a fix I couldn't because of 'explorer.exe, path does not exist' error. Basically, every step I tried where anything was connected to C: or D: I got the 'path does not exist' error. At this point I've done a system restore to before the drive letter changed and I'm running as I was before trying to install the game.My question is, how do I change the driver letter of my HDD without getting all the 'path does not exist' errors? If that's not possible, how do I fix the 'path does not exist errors' when the path starts with C: or D:? Is it done the same way I would with a program through the properties tab in the target path section and start in section? Or is there something more invasive I need to do when the path issue starts with C: and D:
View 7 Replies
View Related
Apr 11, 2011
I am currently running Windows 7 64-bit off of an 80 GB SSD while storing the majority of my programs (and documents, videos, etc.) on my 1 TB other drive. I am quickly running out of space on the SSD and I think it has to do with the fact that it keeps my saved game files there in the User directory while some saves stay on the F (1 TB) drive. Is there a way to transfer/redirect the profile so that it defaults to saving in a User folder on my F drive?
View 3 Replies
View Related
Feb 3, 2012
In Windows 7, all the good icons are in %SystemRoot%system32imageres.dll, but we're still taken to the old SHELL32.dll when it comes time to change an icon.
Is there a registry key or something that we can change to remedy this?
View 1 Replies
View Related
Jun 9, 2012
In UNIX, for changing the directory path, there is "cd" command. .This works fine in windows 7 too.. But the problem comes when we are trying to change the path using environment variables. .
In UNIX, cd $JAVA_HOME changes the path to the value set for JAVA_HOME,
Similarly is there any command in Windows which does the trick from command prompt for changing path using Environment variables. .
View 1 Replies
View Related
Aug 22, 2011
Ok, I have looked everywhere and tried several "solutions" to get windows to recognize where Java.exe so it can run .jar files.I'm running windows 7 64-bit with java 1.6 32-bit installed. And when I try to install craftbukkit I only get errors.I have copied these errors so you can view them at...So I searched all over google and tried to go to my computer, advanced settings, path and add the path there but i still get the same errors.I've been all over the mine craft and bukkit forums but no one there can explain how to fix it
View 3 Replies
View Related
May 16, 2012
I recently bought a new Asus K53e which had Win 7 Home Premium installed and it was in 64bit. I wanted a ultimate version so i installed that. It was working perfectly but then i went to drive c and saw program files x86 and i didnt i was confused because i didnt want it. I havent touched that folder but then i started researching on how to make all my softwares get installed into the 64bit (Program Files) so sevenforums and other sites told me to go to regedit and change the programfiledir to the one you want so i just removed the (x86) and saved it. I also change Program W6432Dir, ProgramFilesDir (x86), and ProgramFilesDir to just C:Program Files (Value Data). So then i installed adobe cs6 master collection and some programs failed to start. I got the message: C:Program Files (x86)adobeadobe dreamweaver cs6dreamweaver.exe The specified path does not exist. Check the path, and then try again.So now this has happened to adobe cs6 master collects ( some of them like dreamweaver ) and some other softwares.I also forgot what the original ProgramFilesDir, ProgramW6432Dir and ProgramFilesDir (x86) was set to.
View 3 Replies
View Related
Jun 7, 2011
how to do i install default mail client
View 1 Replies
View Related
Feb 5, 2012
I just upgraded from 32 bit to 64 bit windows 7, I have two harddrives, a 40 gig for my os (C and a 1 tb for everything else (D. That's how it was on the 32 bit system, but now on 64 bit, there are more folders to mess with (Program Files and Program Files x86). How do I tell windows to install to the bigger D: drive and not fill up my small C: drive? Also, the programs that were already installed on my D: drive, will they need to be moved to the x86 folder, reinstalled, or can I continue to run them from their current location?
View 5 Replies
View Related
Jun 3, 2012
I've noticed that the PC name is listed in those scans and would prefer.Can I change from my real name to something generic WITHOUT causing any problems with anything that's already been done in machine since set up?
View 6 Replies
View Related
Oct 30, 2012
I check it several times, went through every step on the web to changing the default installation folder, and no matter how many times I check it, save it, re write it, it won't save. It keeps installing on my SSD (C)
View 1 Replies
View Related
Oct 27, 2011
I have a 64GB SSD drive that i installed windows 7 on to. That has no become the default drive for everything...like my documents,music,videos etc..how do i change that to my other 1TB hard disk instead? Currently my "libraries" in windows explorer all point to a location on the SSD.
View 1 Replies
View Related
Mar 10, 2011
how do i change the default gpu on my new laptop, device manager is showing 2 gpu and i dont want them to conflict.
View 10 Replies
View Related
Dec 28, 2009
I wonder how I change the default program for dvd's. Now, when I double-click the dvd in "Computer", Windows Media Player is started. I have powerdvd installed. In file associations it shows that .vob is linked to powerdvd. Is there a way so that when I doubleklick the dvd I want to play powerdvd is started.
I don't want to delete windows media player (I haven't found out yet how you do it yet).
View 6 Replies
View Related
Sep 4, 2011
If you have a small but fast (or maybe not so fast) drive that you would like to ONLY run Windows off of and a larger separate HDD that you want to use as the install drive for all programs.In my case I have a 50GB SSD and a RAID0 array of 2TB. With space being limited on the SSD the best option for me is to install everything to the RAID array and leave the OS on the SSD. Mind you, you don't have to be running a RAID array to do this. That's just how my system is set up. You'll probably be better off just using a larger single HDD for stability reasons.And if you are doing a fresh install you should give this tutorial a look: User Profiles - Create and Move During Windows 7 Installation So the first step is to open REGEDIT. Simply click the Start Menu, type REGEDIT in the search bar and hit ENTER.Next look for the "HKEY_LOCAL_MACHINE" Once opened go to "SOFTWARE". There are two folder in this directory we will be editing. Note that the second folder "WOW64" is only for 64-bit users. If you are running 32-bit then the "WINDOWS" folder is all you will need to make changes to.Now from the "WINDOWS" folder you want to select "CURRENTVERSION". Simply click the folder itself not the arrow next to it. This is what you should see in the main window to the right of the directories. Now my registry settings have already been changed. Note that my secondary drive is "D:". Originaly everything here was set to "C:".
Once this is finished the 32-bit users are finished and can restart their systems. 64-bit users have one more step. Now you want to go to your "WOW64" folder. While I just realized I forgot to cut a snippet for this step it's fairly simple. Once in the "WOW64" folder you once again want to click the "CURRENTUSER" folder and observe the main window to the right.Just like in the "WINDOWS" registry you will make the same changes. Once you have implemented your drive your registry should look like this.Now restart your system. Though there is a chance you are completely finished I highly suggest running a command prompt session and typing "sfc /scannow". This will allow your system to scan for any conflicts in the internal settings and fix them.
View 1 Replies
View Related
May 1, 2011
How do I change my default disc drive from G to L? My old DVD/RW drive is not compatible with Bluray discs.
View 3 Replies
View Related
Dec 17, 2011
I've been trying to find a way to change the default icon size in Windows 7. My machine defaults to 'small' icon size, but I prefer the 'large' one, in just about every case. Instead of needing to manually change the size for each individual folder, is there a way I can set 'large' to be the default for all folders? I couldn't find anything in the control panel and haven't been able to find anything about setting a default size yet.
View 1 Replies
View Related