Changed The Default Installation Folder, It Will Not Apply?
Oct 30, 2012
I check it several times, went through every step on the web to changing the default installation folder, and no matter how many times I check it, save it, re write it, it won't save. It keeps installing on my SSD (C)
I recently bought a new Asus K53e which had Win 7 Home Premium installed and it was in 64bit. I wanted a ultimate version so i installed that. It was working perfectly but then i went to drive c and saw program files x86 and i didnt i was confused because i didnt want it. I havent touched that folder but then i started researching on how to make all my softwares get installed into the 64bit (Program Files) so sevenforums and other sites told me to go to regedit and change the programfiledir to the one you want so i just removed the (x86) and saved it. I also change Program W6432Dir, ProgramFilesDir (x86), and ProgramFilesDir to just C:Program Files (Value Data). So then i installed adobe cs6 master collection and some programs failed to start. I got the message: C:Program Files (x86)adobeadobe dreamweaver cs6dreamweaver.exe The specified path does not exist. Check the path, and then try again.So now this has happened to adobe cs6 master collects ( some of them like dreamweaver ) and some other softwares.I also forgot what the original ProgramFilesDir, ProgramW6432Dir and ProgramFilesDir (x86) was set to.
I just upgraded from 32 bit to 64 bit windows 7, I have two harddrives, a 40 gig for my os (C and a 1 tb for everything else (D. That's how it was on the 32 bit system, but now on 64 bit, there are more folders to mess with (Program Files and Program Files x86). How do I tell windows to install to the bigger D: drive and not fill up my small C: drive? Also, the programs that were already installed on my D: drive, will they need to be moved to the x86 folder, reinstalled, or can I continue to run them from their current location?
If you have a small but fast (or maybe not so fast) drive that you would like to ONLY run Windows off of and a larger separate HDD that you want to use as the install drive for all programs.In my case I have a 50GB SSD and a RAID0 array of 2TB. With space being limited on the SSD the best option for me is to install everything to the RAID array and leave the OS on the SSD. Mind you, you don't have to be running a RAID array to do this. That's just how my system is set up. You'll probably be better off just using a larger single HDD for stability reasons.And if you are doing a fresh install you should give this tutorial a look: User Profiles - Create and Move During Windows 7 Installation So the first step is to open REGEDIT. Simply click the Start Menu, type REGEDIT in the search bar and hit ENTER.Next look for the "HKEY_LOCAL_MACHINE" Once opened go to "SOFTWARE". There are two folder in this directory we will be editing. Note that the second folder "WOW64" is only for 64-bit users. If you are running 32-bit then the "WINDOWS" folder is all you will need to make changes to.Now from the "WINDOWS" folder you want to select "CURRENTVERSION". Simply click the folder itself not the arrow next to it. This is what you should see in the main window to the right of the directories. Now my registry settings have already been changed. Note that my secondary drive is "D:". Originaly everything here was set to "C:".
Once this is finished the 32-bit users are finished and can restart their systems. 64-bit users have one more step. Now you want to go to your "WOW64" folder. While I just realized I forgot to cut a snippet for this step it's fairly simple. Once in the "WOW64" folder you once again want to click the "CURRENTUSER" folder and observe the main window to the right.Just like in the "WINDOWS" registry you will make the same changes. Once you have implemented your drive your registry should look like this.Now restart your system. Though there is a chance you are completely finished I highly suggest running a command prompt session and typing "sfc /scannow". This will allow your system to scan for any conflicts in the internal settings and fix them.
I found a way to apply images to folders, I have large collection of music/ videos and I know all xp users love the way folder display images but Windows 7 has hard time applying this.
This step has to be applies manually on each folder but works for me.
Steps:
1.Right click on a Folder >> properties (select)
2. Properties windows (displayed) >> Select Customise (last tab)
3. Choose File.. (under Folder pictures) >> select Image(.jpg) (Note: All my images are .jpg Format, dont have be to be called Folder.jpg)
Note: My folder is not customise to specific type, e.g. Music, pictures etc. I have left it as General Items. (OS - Windows 7 Ultimate 32-bit (6.1, Build 7100) RC)
This may seem like a strange thing to do, but today's SSD article reminded me of my desire to find out if this is possible - I have an unusual requirement that discourages me from even going the "small ssd as boot drive, large hdd for other things" route, unless I can find a way to do this. I do QA work for a distributor of downloadable games, so I like to be able to install the entire catalog (150+ GB), and put them into folders under "C:Program Files (x86)", so that I'll be able to see whether the UAC will cause problems for them (I install most of my other programs outside Program Files). Thus, to use ssd+hdd, I would need a way to apply the same restrictions to a folder on the hdd (and preferably also have any virtualized files directed to the hdd as well, but that's less critical).
I turned on my computer today and for some reason, my desktop had a different background and all of my icons were gone. I couldn't figure out what happened, but after a little looking I found out that for some reason, it was using the Desktop folder from a User called TEMP, instead of the one with my name on it like it usually does. How would I make my desktop use the Desktop folder in my User instead of the one in TEMP?
I am using windows 7 professional for over a year now, two days ago most of my icons (all microsoft office icons, and some other softwares) have been changed to default. They all function properly, just the icon is changed to default. Its irritating.
I tried searching on this forum for similar issues, most of them have been corrected by changing shell icon folder from regedit. I can locate that on my system.
I was having probs installing Office 2007 a while back and whilst using 2 forums for help to resolve the issue, one of the things i had to do was (i think) change the default install path for when i'm installing new programs. The 2 links for the help pages i was using are: Office 2007 Install Error 2203 - Office Setup Error 2203. An Internal Error has occurred.
The problem i've created is that now i'm unable to apply most updates for the programs that are currently installed (and thus on shutdown it always tries to apply updates, that fail) and also, i'm not able to install and new programs.
My System OS: Win 7 x64.All ICONs for MS apps, Snagit, UltraEdit/Compare , Adobe got wacked when I installed Solarwinds Advanced Subnet Calculator v9.0.6.I have a request out to them to see if they have any knowledge.How do I get the original icons back?I had this happen a short while back but did not know when it happened and after trying the myriad ideas that I came across on the web and thru this form learned that this seems to be a known issues and has been since Vista but no fixes surfaced.As it has been some time since my last post perhaps someone has uncovered a fix.I just tried using the restore point back to before the Solarwinds App was installed and no change so it seems that whatever files got smacked by the application install did not get changed back by the restore point operation.
On my Windows 7 at the bottom left it shows:Test Mode,Windows 7,Build 9780,Also I changed the boot screen but I can't now change it back to the default, I tried using the command prompt but didn't work.
I was trying to download a trial of adobe photo shop to do my homework and i am on my moms laptop. i went to open the program and a dialog box popped up asking what program i wanted to use to open this file, (i didnt notice the checked box at the time stating it was going to use this option for all files associated with this extension!) and the only available program that was listed was WINDOWS MEDIA CENTER and i needed to use the program so i clicked on it.... wish i wouldnt have. it changed ALL my .exe programs ie; google,firefox,system restore and now anytime i try to run anything the media center comes up!!
I have seen on the web that several other people have done the same exact thing. I was freaking out cause this is not my computer and so i went to accounts and made a new admin desktop, which is what i am on now. i have found involves doing something on the actual desktop that is messed up. but i cannot open any executable files on that desktop ie;command prompt,so i cannot do anything on there.
i know there has to be some way to reverse what i did, i just need someone to walk me through the process so i dont screw the computer up any more than i already have, i am able to open system restore in the new desktop, i but dont think that will have any affect on the change i made let alone have an effect on the other desktop from this desktop. I also went to the place on the desktop to change the default for programs and .exe is not listed.
I changed it was because I tried to optimize (my mistake) by reducing it. My router is set to 1365 MTU manually after a support tech from Linksys asked me to change it for a previous problem. I used the "netsh interface ipv4 set subinterface "Wireless Network connection" mtu=nnnn store=persistent" command to change it around to find what MTU Windows uses automatically. It was set at 1500 (for both LAN and WLAN). I set the WLAN to 1365 to see how it would perform, didn't see a noticable change I believe so I switched back. Now I see a slight lag when loading sites. I also compared the time against another pc that I did not tamper with (which by default was set to 1500) and that one worked normally.I fear I may have overridden Windows defaults for handling MTU since after manually setting it to 1500 (was originally 1500 when it was untouched) it lags a little. For the time being I set it to 1365 to get the performance that I normally got with default settings.
My question is if it's possible to get the original performance back with the MTU set back to what it was originally (1500)?Also I learned my lesson and won't be trying to change settings without first making sure they are completely reversible. Also I'd like to do this without using System Restore.
I installed Avast AV when Norton expired. In order to activate the internet security stuff, I had to install the upgraded library file, blah, blah, blah. In order to do this, I had to show hidden folders. Having only recently begun my foray into Windows 7 (coming from XP), I was flying a bit blind. I must have hit the wrong thing. After I was able to see hidden folders, install the library file to Avast and continue on with the reboot, the desktop came up wiped clean of my documents/pics, etc and my C:\Users\Susan folder has disappeared and is now called Public. Next, I thought I may have switched my user from Susan to Public, but I have not.
I recently installed an old game. I'm running Win 7 Pro x64 and the game was for XP. I messed with the compatibility settings and I think something went wrong. The folder icons have changed everywhere but on the desktop. The desktop shows the regular aero styled icons. Everywhere else the folder icons are some dumbed-down picture that looks low tech even for XP. Its bright yellow and has no 3D effects. To make it even more frustrating, it only does this when the view is set to details, list, or small icons, which are the only views I ever use. What button did I push and how can I fix this?
I'm currently doing an internship in an office, and we all use windows 7 enterprise.The management didn't give us the possibility to install any software, because we don't know the administrator password and we don't have installing privileges.We need some way to alert each other whenever a shared network file or folder has been changed, with a pop up message or a text log or an email...there's plenty of third party freeware software that does this, but we can't install anything Is there some way to do it with the built-in windows tools?
Everything was good with my hard drive but now the last time I opened my pc I noticed something really odd. In "My Computer" folder my Local Disk icon had changed. Instead of being an icon that displays a disk, it is an icon that displays something like a crab! What is that?! Is it some kind of virus? How can I change it to the default icon?!
Folder customization icon is changed when adding it to the setup file and installing it on another computer, how to keep changes? Program I am using Setup factory 9.
I have VLC Portable as the default program for opening some video files, like .mp4 and .avi. And I have Foobar (portable) as the default program for .mp3.Usually the icons on .mp4, .avi, .mp3 files get updated with the icons of the assigned media players.But on this PC it's not working. They're still the same icons as if WMP was the default player.Does it have to do with the Standard user account? (Because on other PCs I run from an Admin account and I don't have such problems.)
I'm in charge of security and fixing problems on my grandma's two computers. She typically installs several hundreds of games on her computers. I would prefer her to install the games to "c:\program files\games" rather than "c:\program files" as that folder ends up getting so cluttered that I can't tell what's in there. Is there a way to change the default installation location from "c:\program files" to "c:\program files\games"? She's too lazy to change the location manually when she installs software, so it would be nice just to change the default location, but I'm not sure how to do that on Windows 7
Everytime i download something it goes directly to my hard drive :E and i want it to go to my C: and i have tryed the browser settings but it doesnt work I am using Windows 7 Home Premium 64 bit
I just built a new computer which includes a SSD and Hard Drive. I plan to use my SSD for only Windows 7 and my Games. I plan to install all other applications on my hard drive therefore I am trying to change the default software installation path from C:ProgramFiles to E:ProgramFiles. I have been following Microsoft's tutorial that says to change the key found in HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows CurrentVersion but that did not work as I am still getting the original installation path.
does anyone here know how to set a default folder size, so that every window opened will display my folders the same size? i like the bigger folders and would like to set it for the entire system, instead of having to continually reset it every time i open a new folder.