Go Back From Dynamic Disk Mode To Basic Mode In HP Probooks
Nov 2, 2012
Today I wanted to intsall Windows 8 in dual boot envirnment with Windows 7 so I created a separate 60gb partition for Windows 8 but after the partition was created, all the previous volumes like Windows 7, HP_Recovry and HP_Tools and the newly created Windows 8 partition are now dynamic plus I can't install Window 8 on that dynamic partition. Below is current situation as shown in disk management in Windows 7: [URL]
I don't want to lose my data including the Windows 7, and HP_Recovry and HP_Tools partitions. clean method to go back to basic disk mode from dynamic mode without losing data. When try to convert from dynamic to basic using easeus utility, it gave me following warning: [URL]
so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
well scenario is I got my new dell 15r laptop with windows 7 basic loaded yesterday.. so backed it up and wanted to put my old PC's windows 7 ultimate version on it. I installed it, while installation it allowed to have only 4 partitions.it already had 2 partitions1) Recovery - 15gb2) something i forgot ... some 40MBso i made a partition of 125GB for OSand rest of unallocated space ie some 660gb could not be allocated in more than one partition so i let it be unallocatedso after installtion got completed and OS started i went in disk management and tried to make that unallocated space of 660GB in 2-3 partitions.but it converted all my previous partitions also to dynamic. even recovery partitions.ow do i go back to basic partitions?? particularly about that recovery partition and my C: (OS partition) ??
Last night as I was attempting to install Windows 8 RP to test it out, I decided I would do a dual boot incase I didn't like it. It downloaded, burned fined and I went to make a new partition, and this is where things went south for me. It converted every disk to dynamic once I had created the new disk to install it on and for the life on me I can't get it to convert back to basic, so I'm pretty well screwed if something goes wrong. Things I've done:
1) Attempt system restore - Ok, so I didn't have a restore point created so this is of no help.
2) I followed this guide found here on SevenForums and attempted all 3 methods - nothing worked Convert a Dynamic Disk to a Basic Disk
3) I downloaed EaseUse Partition master to attempt to change dynamic back to basic, and still a no go.
4) Tried to install Windows 8 again and it would not let me delete the current dynamic disk partitions to start over
5) Tried HP recovery tools to set the computer back to factory condition and it wouldn't work.
Is it possible to delete everything and start over from scratch or will it still be dynamic? At this point, i want a time machine so I can go back before ever attempting to make a dual boot.
[FONT=verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif]I initially had 1 500gb dynamic disk, with one partition containing all my documents and windows files. I created a partition in the free space to copy my documents into so I could overwrite Windows keeping my documents intact. However I did not have enough free space for all my documents so after copying over one batch of files I shrunk the windows partition and extended my document partition. I had to repeat this again so I now have three extended document partitions.[/FONT] I then put in the windows CD, formatted the OS Recovery, SYSTEM Reserved and Windows parititions but then was unable to install Windows as it did not recognise any disks. I attempted FixMBR etc but to no avail.
I searched around and saw i may be able to change the sector hex from 42 (dynamic) to 07 (basic), but im wondering whether doing so will preserve the extended partitions i have? So my question is, will changing 42 to 07 preserve the extended partitions. Do I need to repeat for each 42 (like the link you posted) and then the three dynamic extended partitions will then become one basic partition? At the moment I can not actually see the data so have no idea how to back it up? Otherwise I would do as you say and back it up, format and copy back over.
[URL]
DISKPART: Acronis Disk Director (see documents spanned)
Active unDelete (again, three partitions)
HxD (showing 42)
So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
I have a 500GB dynamic hard drive which had a Windows 7 install on it. I wanted to reinstall Windows, so from within Windows setup I formatted the system and Windows partition, leaving a partition containing documents and pictures (i was unable to delete them). From then, Windows seemed unable to recognise the disk so i searched in DISKPART and found that the disk was labelled as INVALID.
After Googling around it looks as though i can simply change the 1C02 in the hex from 42 to 07 - however, my only concern was that the documents i have on this drive are spanned across three adjacent (dynamic?) partitions - so i am concerned that by focing the disk to be basic i will lose the connection between these partitions. [URL]
DISKPART:
Acronis Disk Director (see documents spanned) Active unDelete (again, three partitions) HxD (showing 42) So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
When I am trying to partition new drive from C drive. My C drive have 450 GB Space, so wanted to make a new drive of 250 GB. Did the basic steps but when clicking on Finish I get the following error "The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?".
I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
I ran into a problem with a friend of mine. She was having problems with her computer trying to run programs when her computer desktop was running in basic mode and not in Aero mode. There was 2 accounts on the computer one in Aero and one in basic. When she logon on to the one in Aero everything ran fine. When she logon on to the one in basic her account. Everything she tried to run didn't work or couldn't change or update.
I ask her if she always ran it in basic and she said she had never change the desktop. As soon as we change it back to Aero than everything was fine. I might be wrong but you should be able to run in the basic mode with no problems right. Does Win 7 change all the programs to run in basic mode and do you have to setup those programs to run right in basic mode. Or is this a commom problem with Win 7.
I am using WS2008 however the procedure is the same as Windows 7.
What I want to do, is have the ability to install, on a partition, a bootable partition where it will allow me to install Windows from a directory which contains the entire contents of the DVD/ISO which is on location on another HDD (on the same computer)
how is it possible to do this? Basically this is for a server that exists "out there" and have no access to it. I manage it myself etc... and I know this is possible to do, but has been such a long time since Ive done it.
What is it that I need to install on the computer to allow me to go into some mode (recovery mode maybe) so I can run setup?
Wasn't really sure where to post this but maybe someone can help me with this very annoying problem I've been having recently.. OK once my monitors go into sleep/hibernation mode they stay black no matter what i do i have to restart the pc to fix the problem also all the lights on my keyboard go out,, my mouse lights up when i move it but the monitors still stay black,, i never had this problem with the beta and I'm about to pull my hair out I've been up and down through the settings and i can't find any thing that would cause this,.
so the Windows 7 Ultimate 64bit install is fresh, and all the drivers are the latest available. I have updated my mobo's bios to the latest version through Asus' "AI Suite II" which makes things very simple. I want my PC to be able to go into sleep mode but I don't want to have to force shutdown every time it goes into sleep mode after a time span. For some reason if I wake my PC after its been in sleep mode for a short period everything turns back on just fine... I know there might be a solution through the configuration panel
I recently put together a new build and it's been working great, the only glaring problem I have is that when the computer goes into sleep mode, it won't turn back on. Specifically, in sleep mode it goes quiet, when I click mouse/press a key then the fans start up, sounds as if it's working, but the display remains completely black, and mouse laser doesn't turn on.
My system is: - Intel i5-2500K overclocked to 4.2GHz (via motherboard overclocking utility) - ASrock Z68 Extreme4 Motherboard - Corsair Force 3 60gb ssd - Asus GTX 570 - Corsair TX M600 power supply - Corsair Carbide series 400r case (if it makes a difference?)
Basically, I turned on my laptop and it automatically went on Safe mode and I can't get back to normal. The screen is also blurry and instead of the taskbar I can see the top of the screen...eugh.. If you get me. Should I reinstall my Windows? p.s. I don't have a disk for it, so I guess I will have to download a ISO or something. Will this get everything back to normal?
In order to change back the format type of my system disk from Dynamic to Basic, I took a system image using Win 7 Pro System Image Tool and deleted all the partitions on the system disk, change the format type to Basic using the Command Prompt, and restored the image. Unfortunately, the format type restored also to Dynamic.Did I missed any step? or there is something wrong?
I tried putting it in safe mode and it went through running some files and when it came back to the start menu, the mouse was frozen. I could still type in my password, and it went to the desktop but the mouse remains frozen. I hope I don't need some other password because I don't have one.
I have a HP620 Laptop. My daughter had a virus that was wreaking havoc so I tried to sanitize my hard drive.BIG MISTAKE.Now I get the non system disc or disc error screen.tried going to (with the use of F10) to the set up but to no avail.Am locked out. Is there a way to get this computer back to factory spec operating mode?
I have been reading up on it from microsofts site as well as various places throughout the web. most articles were also a few years old might have been before windows 7 was even released.from what I understand you will only really have an issue if you are using windows 98, 2000 , xp and server 2003.What I am trying to do is make a partition but the only way to do it so it seems (I am using the admin disk management tool)is to convert to dynamic.I am creating the partition to install a small linux distro to use in dual boot but the part that is making me weary is the last step of the disk management tool says "the operation you selected will convert the selected basic disk(s) to dynamic disc(s). If you convert the disk(s) to dynamic you will not be able to start installed operating systems from any volume on the disk(s)(except the current boot volume.now I will (hopefully) never have to deal with those headaches called OS's again. So would I have any negative impact from this conversion? would i still be able to boot windows 7 with all of my data still intact?
i have a acer laptop having 500 gb hd. Isince i want to dual boot ubuntu with windows 7 i was planning to install it on Local Disk F so i shrink the Drive F for swap area required for ubuntu. I shrink it to 4500MB and new partition was created showing 4.5GB of space. Then i right click on it to create new volume. I keep on clicking next till a warning came.I click ok to that and my whole disk got converted to Dynamic disk. Now my problem is that my os is still booting even after converting to dynamic . I dont know how. Since i have only one hd how can i use Partion wizard since i can't unallocate the whole HD.
I am building a new computer with 1TB of HDD. At first when I started to install an OS, a system volume was created automatically of 100MB size. Then I created another 200GB partition as C to install Windows 7 and 2 other partitions of 250GB. I wasn't allowed to create another one partition. After I finished windows installation, I tried to create partition in unallocated space using > New simple volume. The sytem warned me of dynamic volumes > accept it. Then eventually all 4 volumes were converted to dynamic in disk management window.
I wanted to make a new partition on my hp laptop on the only disc it hasso as to create a system image.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly. As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd)
1) What is the major difference between Dynamic and Basic Volume It seems Dynamic volume can let you change the size of the volume up or down when there is an adjacent unused physical space, without impairing the files already stored. However Partitions (Basic Volume) can only be extended, and will always requires reformating.
2) It seems that Dynamic Volume has a lot more overheads, so it may be a little slower and actual file stored will be less, any opinion on that?
I did notice one of the Dyname Volume started to show massic missing storage space, e.g. Used Space of 30GB only has 7GB realy files on it, absolutely no hidden files there because I created the volume. This happens after shrinking and expanding it up and down a couple of time, BUG?!! If so it is a serious one.
i got only one disk and all of the partitions are dynamic i have low space on the system files partition so i decided to extend the partition i deleted a partition and had an unallocated space but i couldnt extend the the system partition i tried to install windows but it couldnt install on a dynamic disk
