MOnitors Go Into Sleep Mode And Won't Come Back Up,
Dec 11, 2009
Wasn't really sure where to post this but maybe someone can help me with this very annoying problem I've been having recently.. OK once my monitors go into sleep/hibernation mode they stay black no matter what i do i have to restart the pc to fix the problem also all the lights on my keyboard go out,, my mouse lights up when i move it but the monitors still stay black,, i never had this problem with the beta and I'm about to pull my hair out I've been up and down through the settings and i can't find any thing that would cause this,.
View 2 Replies
ADVERTISEMENT
Mar 10, 2012
I can't wake my computer from sleep.
View 1 Replies
View Related
Apr 17, 2011
so the Windows 7 Ultimate 64bit install is fresh, and all the drivers are the latest available. I have updated my mobo's bios to the latest version through Asus' "AI Suite II" which makes things very simple. I want my PC to be able to go into sleep mode but I don't want to have to force shutdown every time it goes into sleep mode after a time span. For some reason if I wake my PC after its been in sleep mode for a short period everything turns back on just fine... I know there might be a solution through the configuration panel
View 5 Replies
View Related
Jan 22, 2012
I recently put together a new build and it's been working great, the only glaring problem I have is that when the computer goes into sleep mode, it won't turn back on. Specifically, in sleep mode it goes quiet, when I click mouse/press a key then the fans start up, sounds as if it's working, but the display remains completely black, and mouse laser doesn't turn on.
My system is:
- Intel i5-2500K overclocked to 4.2GHz (via motherboard overclocking utility)
- ASrock Z68 Extreme4 Motherboard
- Corsair Force 3 60gb ssd
- Asus GTX 570
- Corsair TX M600 power supply
- Corsair Carbide series 400r case (if it makes a difference?)
View 9 Replies
View Related
Nov 2, 2012
Today I wanted to intsall Windows 8 in dual boot envirnment with Windows 7 so I created a separate 60gb partition for Windows 8 but after the partition was created, all the previous volumes like Windows 7, HP_Recovry and HP_Tools and the newly created Windows 8 partition are now dynamic plus I can't install Window 8 on that dynamic partition. Below is current situation as shown in disk management in Windows 7: [URL]
I don't want to lose my data including the Windows 7, and HP_Recovry and HP_Tools partitions. clean method to go back to basic disk mode from dynamic mode without losing data. When try to convert from dynamic to basic using easeus utility, it gave me following warning: [URL]
View 3 Replies
View Related
Nov 15, 2009
Dual Monitors reset when Screensaver/sleep/reboot/hibernate
&
Returning to single monitor cause a hissy fit tantrum by win 7
I have a problem with Windows 7 and my dual monitors setup. I have 2 SyncMaster 245T monitors, connected via DVI cable to a NVIDIA GeForce 7900 GTX card. I have downloaded the latest drivers from Nvidia for the card, but I am experiencing a fairly regular issue with regards to running Dual monitor setup.
When ever the system goes in to sleep/hivernation mode for more than a few minutes, upon restarting, the second monitor is no longer on. I have to physically go into settings and extend my monitor again. Simply rebooting the computer reboots it back up on only the one monitor. I have noticed twice now that this also has occurred when the computer went into screen saver mode too.
Additionally a freakish thing I found happens when I was trying to isolate the trigger of this problem is that, when I turn off the power to the 2 monitor (Not mains, just the switch on the second monitor. So mains power is still supplied) windows 7 has a major hissy fit.
It repeatedly sound the audio cue for disconnecting hardware, while the one monitor left on, constantly flickers, in what seams an attempt to return to one monitor. Only returning the monitor back on would stop the unsuccessfully attempt to return to the one monitor.
I have tried to look for anyone else with similar problems on the net, and apologize if a similar problem has already been posted here, but my search revealed nothing. I was wondering if anyone knew of a fix, or has had similar issue that they resolved.
View 3 Replies
View Related
Feb 15, 2012
how do I get back regular mode from safe mode?
View 5 Replies
View Related
Sep 17, 2010
How do you stop laptop from going into hibernation mode / sleep mode?
I run a program that takes 8 hours. I need the laptop to stay awake.
View 1 Replies
View Related
Jan 19, 2012
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
View 8 Replies
View Related
Apr 17, 2009
I went to sleep last night with the computer on (Windows 7 7077) like always and this morning it's still on but none of the usb devices are working, monitor doesn't come back from sleep state but the fans on all the components are still spinning. I tried hard rebooting 3-4 times and still nothing. I let it sit and cool off for a bit and still nothing. Anyone know what the problem could be?
I was thinking it was the motherboard but then wouldn't the ethernet light be off if the board wasn't working? The only thing on the computer the has been overclocked is the CPU which I took from 3.0ghz to 3.8ghz and it's been running fine on the stock cooler for the past 6 months almost and then bam it's like this. I don't think it could of been over heating as the temps usually run 30C at idle and 50-60C at full load and the side is off of it.
View 9 Replies
View Related
Jan 13, 2012
I am running Windows 7 Pro 64bit and am having an issue with the computer returning back to sleep. At the moment, I have hybrid-sleep enabled, and if I schedule a recording while the computer is powered down in the hybrid-sleep mode, it will wake itself to record the program. However, I'd like the computer to place itself back into its previous state after the recording is complete. So far, I haven't been able to figure out how to do this. The computer wakes just fine but will not return back to sleep. I'll add that during the waking/recording process, the computer has not been touched to "wake" it up, if you will. Is there a setting in the power options that I need to check that I haven't seen?
View 1 Replies
View Related
May 8, 2011
As soon as my computer wakes up from sleep mode, it takes about a minute to connect to my WiFi. All of my other laptops and computers connect instantly, except for this one.
View 8 Replies
View Related
Feb 19, 2013
My computer is in safe mode right now and it wont let me use my hdmi plus so what should i do?
View 1 Replies
View Related
Nov 29, 2011
power off and unseat the video card, re-seat it, and power back up...
Windows 7 pro Intel Core i7 870 Processor ATI FirePro V4800 Motherboard GA-P55A-UD3Without doing the above steps, just get black video screen
Would this be a software issue, problem with motherboard or video card?
View 3 Replies
View Related
May 24, 2012
I bought a new notebook running windows 7 64 bit a couple of months ago After running a full system scan with Kaspersky anti-virus a couple of days ago I now have a bug with sleep mode - After going into sleep mode, the user with my picture icon is locked meaning that I can't enter my password to log back in - the password box doesn't show.With the ASUS face recognition scanner I'm logged back in, but everything is 'buggy' e.g. if I click on the start button and hover over that entire area it goes into sleep again, or if i click on the bookmarks on chrome it doesn't show them, instead it click on an actual site within the bookmarks.After going into sleep the only way to enter and return to a normal state is to click the 'switch user' whereupon, my user picture icon reverts with the password boxI have tried a system restore but this didn't work.
View 1 Replies
View Related
Dec 27, 2011
How can I go back to the orignal and get away from the black screen
View 1 Replies
View Related
Feb 7, 2013
Basically, I turned on my laptop and it automatically went on Safe mode and I can't get back to normal. The screen is also blurry and instead of the taskbar I can see the top of the screen...eugh.. If you get me. Should I reinstall my Windows? p.s. I don't have a disk for it, so I guess I will have to download a ISO or something. Will this get everything back to normal?
View 5 Replies
View Related
Oct 7, 2012
Since a few days my PC developed an unusual behaviour: it goes to sleep mode at random intervals ! sometimes it does that at windows start up for several times...
I had microsoft security essential installed and read on some forums that it could be the reason for this problem: I unistalled that. Then I run online scanned from ESET nd Bitdefender: all clean.
Then I installed avas free edition (as I was without any anti-virus software). Did a complete system scan with no problem. I messed up with the power consumpion settings with no results.
The only solution I could find was to use the software "Dontsleep.exe" which I found googling around: it works ! I looked up all the running services and application at windows sturtup and disabled a lot of them with no results.
View 2 Replies
View Related
Dec 28, 2012
So this might be the wrong place for this thread but I didnt see a computer specific section so i picked this just incase it is related to my windows. Anyway the problem i am having is that every so often, more often then not actually, when my computer hibernates from inactivity, it cannot be woken up. I click the mouse, press everything on the keyboard and nothing will happen. I even try pressing the power button yet that does nothing. The power button just keeps blinking as normal when in sleep mode. I also tried Holding down the power button, in hope to force shutdown the computer but that did not work either. The only way anything happens is if i unplug the computer and then plug it back in. Unfortunately i know thats really bad for the computer but i dont really have a choice.[CODE]In addition, i have restored my computer to factory defaults, aswell as installed all the latest drivers
View 4 Replies
View Related
Jun 3, 2012
After putting my computer to sleep, upon waking I receive an error code, which should be present in the dump file. I closed the error window before copy pasting it in here. I will update the post with the error information next time it happens. This only happens when putting my computer to sleep. Hibernate and shutdown do not have this problem, and I have not received any BSOD's during use. This has been happening for about 10 days. My memory set up is kind of strange. I have 2x1GB 1.8V ram and 2x2GB 2.1V ram, both DDR2, and both running at 2.0V. I didn't want to overvolt the 1.8V ones too much. The timings are slightly loosened on the 2.1V ram to match those of the 1.8V ram. I have run Memtest86 with no errors. My hard drives have also checked out fine.I have my q6600 overclocked to 3.0GHz, with a voltage increase, CPU-Z is saying it is running at 1.408V. I have run plenty of Prime95 tests. No stability problems, and temperatures are always acceptable. I have had it at this overclock for 7 months, ran at stock the previous 4-5 years. My GTX 460 is overclocked as well, always has been stable as well, with temperatures plenty low enough.
View 1 Replies
View Related
Jun 21, 2012
Ive been having a blue screen of death after reawakening my computer from sleep mode.It does not always happen but it happened 3 times already.I'm using windows 7 professional 64 bit full retail version
View 4 Replies
View Related
Sep 25, 2012
My pc is shutting down more and more frequently so that it now happens every time I close the lid for sleep mode. In Event Viewer there are numerous "Event 41, Kernel Power" warnings.
View 2 Replies
View Related
Jul 17, 2009
I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP. To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password. I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.
View 9 Replies
View Related
Sep 3, 2010
I am using window 7 and when my computer goes into the sleep mode sometimes the mouse will not be available to select the programs. I have turn off the power and when comes back on it is ok. Why does computer function properly when you try to use it after it goes into the sleep mode!
View 3 Replies
View Related
Sep 21, 2010
I am not savvy in this kind of stuff. My husband has a home built computer that runs our tv system with windows media center. He had to leave on a military deployment and right before he left he had to reinstall the OS. Since then the computer refuses to wake from sleep mode. I have to scram it to get it to come back up. Since we run the media center it ought to wake up to record automatically, but it isn't doing that either. I've checked all the power options but that doesn't seem to be the problem. Although, at this point, I really have no clue.
View 8 Replies
View Related
Nov 24, 2010
Is it normal that when my computer is in sleep mode that my cooling fans are running? They are always running.
View 2 Replies
View Related
Mar 7, 2011
From time to time Windows 7 will not go to sleep (only the display will turn off). I have searched various forums and tried the following fixes: I have already made sure that network adapters are not allowed to wake up the computer. I typed "POWERCFG -ENERGY" in the command prompt (as administrator) and an energy report was generated, which reported this error: System Availability Requests:System Required Request The service has made a request to prevent the system from automatically entering sleep.
Requesting Service Spooler Opening task manager, I see a process running called "splwow64.exe" -- is this the spooler preventing the computer from sleeping?
View 1 Replies
View Related
Jul 9, 2009
To prevent my computer from going out of sleep mode by itself I have to unplug my ethernet cable, that's 1 problem but I don't really care.
The other problem is when I come out of sleep mode, my DVD player opens by itself, I close it, and it reopens.
View 9 Replies
View Related
Jul 22, 2009
Windows 7 is freezing in sleep mode now... I don't think it's my drivers or anything because 2 updates earlier it worked fine. I'm wondering if anyone knows if this is an RC problem, or if something is wrong with my computer. I hope not since this computer is only 2 week old... There is like nothing on it and everything downloaded has been from a disk so no viruses (well except kasperky anti-virus but I HOPE that would be clean lol).
Basically when I put it into sleep manually, I cannot get it out, and my power/reset buttons do not work, I actually need to turn off the electricity.
Oh, and it's not my screen considering I CAN turn my screen on but it goes right back into powersave mode (sleep mode). I DID force it out once, and it said no signal from the computer even though the computer is on. This leads me to believe it is the OS (or god forbid one of my parts).
I just realized something... I have on HD connected via sata cable, but I took the power away from it (I wanted to hear something). I mean is that the possible cause? I doubt it though since it's not registered as an HD due to having no power... And my sound card light is on, so I'm assuming that is still on when I put the computer in powersave mode... Maybe that's an issue?
View 9 Replies
View Related
Aug 11, 2009
I am still having bug and freeze problems on all of the computers that I have been testing on since the first release in November.
I am currently testing both x64 and x86 versions on 4 of my PC's and still having minor bug issues, and the major freeze problem.
I do not Just use my PC's for e-mails, browsing the web and gaming. I primarily use them for Engineering Design Work and they need lots of resources to operate efficiently. My primary Base unit is the one I do most of my work on and the Most efficient Operating system on it is Windows XP x64 (sp2) and customized. (Not the Basic install of services and registry sets).
The freeze issue is random and it happens when my PC's go into sleep mode. Some times the will wake up normally, but way to often they will not wake at all, I have to force re-boot. And no error logs related to sleep mode issues, only the E-ID 41 (forced re-boot). This has happened on all the releases from 7000 to 7127, and now 7600, the releases from 7137 to 7229 never had this problem. And this has happened on all my test PC's including Laptops and Desktops.
I have tried many changes in settings for Power Settings (Advanced), Network Adapter Settings, Monitor settings.
Ideally I want my Network Adapter to stay Active on my main box so I can access files from my other computers any time I need them, I want my HDD's to go to sleep when not in use so they will live for a while. and My Monitors to shut down when not in use.
View 9 Replies
View Related
Jun 29, 2012
When system goes to sleep longer than a hour and you wake it up the bottom third of the screen freezing. The top 2/3's get split like window pane a when you scroll the top 2/s's will scroll but the bottom 1/3 will remain as it was before sleep. Also the bottom third wont have any hover icon effects though icon will still work, the task work as intended. If I restart the programs the will work fine but windows has to restart for icon hover effects to work.
View 2 Replies
View Related