I am using window 7 and when my computer goes into the sleep mode sometimes the mouse will not be available to select the programs. I have turn off the power and when comes back on it is ok. Why does computer function properly when you try to use it after it goes into the sleep mode!
View 3 Replies
I'm not blindly posting the issue. I have done research and followed other threads in order to troubleshoot the problem but to no avail.I built my computer back in January of this year. Not up until a few days ago did I start having this issue. I can't think of any major changes I made in order to cause this. I can use my Logitech Mouse and Keyboard the wake the computer up from the sleep mode... but once it's up, neither of them are responding.Things I checked for: Latest update on the USB drivers, Logitech Software update (including the PS/2 Driver) Windows update. I checked if the option is checked ON for 'Allow this device to wake up the computer' (and it is on). When other things are plugged in the same USB port, they work just fine after sleep mode, e.g. my drawin
View 1 Replies View RelatedI am trying to get my PC to be woken from sleep by the keyboard. My keyboard and mouse are both USB devices so I have gone into my bios to enable USB devices to wake PC from sleep.Now though my PC wont go into sleep mode all it does is breifly enter sleep mode then straight away comes back out of it, is there any thing that can be done to get around this problem.
View 5 Replies View RelatedHow do you stop laptop from going into hibernation mode / sleep mode?
I run a program that takes 8 hours. I need the laptop to stay awake.
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
View 3 Replies View Relatedwreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
View 8 Replies View RelatedI just got a new mouse but its a PS/2 connection instead of USB and it wont wake the PC from C3 sleep (i think the mouse is being turned off in sleep). My old USB mouse which i took out today worked perfect and would wake the PC from sleep by clicking once.
Under Control Panel>Mouse>Hardware>Properties>Power Management:
Allow the computer to turn off this device to save power is unticked and greyed out Allow this device to wake the computer is ticked Im using Windows 7 x64 Ultimate.
I have a bluetooth mouse and when the computer goes to sleep the mouse will not wake it up. If I move the mouse or click the buttons nothing happens, even though the mouse has a blue activity indicator light (indicates mouse activity, not connectivity). If I instead type on one of my keyboards it will wake the computer up and the mouse will reconnect.
View 2 Replies View RelatedI have a Razer Copperhead USB Mouse. Specs of my desktop can be found here: TechComet: My Gadgets, Basically, I put my desktop to sleep (using S3-STR) and when I wake it up my moues does not respond for about 15-30 s after which it works fine. I am running Windows 7. I have no other problems with my system, my keyboard responds fine and I have all necessary drivers installed. I have no idea why this is happening and the fact that my computer resumes from sleep in 2 seconds is great, but not when I have to wait another 30 for the mouse to work!
View 5 Replies View RelatedI have a laptop that is now running Win7 32 Home Premium(I upgraded from Win xp). I am using an external keyboard and mouse, as I am using it as a HTPC hooked up to a TV and want the laptop display closed and laptop tucked away. I have all the power options in Win7 set to put it to sleep, but there is no option I can find to have it wake up from sleep other than the power button on the laptop which is not accessible if lid is closed.
Some have said you need to go to the mouse/keyboard driver itself(HID Device) in device manager, and there should be a power management tab on the driver/device options, but my usb options do not have this tab. I also went to the Bios to configure power options and there are not options to configure power states(such as S3 S5 etc). I can get the laptop to go to sleep with the sleep button on a usb keyboard, but once it is asleep, it will not wake up from any command from the mouse/keyboard. I believe its because the USB ports are not being powered while in sleep mode, so it will not see a wake command - As I said before my USB port options do not have any power management settings. I also plugged in an MCE remote which has a sleep button, and same thing- it puts it to sleep, but will not wake it up. My goal is to just use an MCE remote for all commands -as I am running Windows Media Center.
Over the past week, my monitor,keyboard, and mouse become unresponsive after waking from sleep. I haven't installed any new software in the past couple weeks and all my drivers are current. It doesn't happen every time, its random. About 3-4 times in the past week I come home and hit the keyboard to wake it up, the computer wakes up, but the monitor, keyboard, and mouse never come on. I've tried unplugging both the keyboard and mouse and it still won't work. I have to hard reset the comp for them to come back on. Unfortunately, since its random, I can't duplicate it, I just have to try some things out and wait to see if it happens anymore.
View 1 Replies View Relatedpower off and unseat the video card, re-seat it, and power back up...
Windows 7 pro Intel Core i7 870 Processor ATI FirePro V4800 Motherboard GA-P55A-UD3Without doing the above steps, just get black video screen
Would this be a software issue, problem with motherboard or video card?
I bought a new notebook running windows 7 64 bit a couple of months ago After running a full system scan with Kaspersky anti-virus a couple of days ago I now have a bug with sleep mode - After going into sleep mode, the user with my picture icon is locked meaning that I can't enter my password to log back in - the password box doesn't show.With the ASUS face recognition scanner I'm logged back in, but everything is 'buggy' e.g. if I click on the start button and hover over that entire area it goes into sleep again, or if i click on the bookmarks on chrome it doesn't show them, instead it click on an actual site within the bookmarks.After going into sleep the only way to enter and return to a normal state is to click the 'switch user' whereupon, my user picture icon reverts with the password boxI have tried a system restore but this didn't work.
View 1 Replies View RelatedI have a brand new dm3t series laptop. There are two issues that I'm having with the laptop that no one can seem to figure out. I literally had an HP tech remote access my laptop and spend an hour trying to figure out what was wrong.
I have tried system restore, recovery, re installation of drivers and really everything else they've asked me to do. I turn to the forum to see if anyone is can help, thanks much.
1) First issue is very annoying. When I awake my computer from sleep the mouse is very sluggish and doesn't hardly respond to the track pad. Furthermore, the mouse is a magnify glass and when I do try to move the mouse via track pad it just zooms in and out. Oddly enough, after a few minutes of sitting there the mouse starts to work again. It's almost like the mouse has to warm up. It is very frustrating.
2) Second issue is the display on battery power. When on battery power the screen CONSTANTLY is dimming and brightening itself. For instance as I'm typing this thread the screen is brightening and dimming for no apparant reason. I'm not sure why and i'm sure it is wasting my battery. I've tried all sorts of power management tips/ticks and still nothing.
Any help would be appreciated, should I just return it? What can I do?
I have read many threads on this, but I cant seem to get my laptop to wake using the wireless kboard/mouse. I have a HP pavilion dv4 with windows 7 x32, and a logitech LX710 Kboard/mouse. I am beginning to think that I will not be able to wake on this laptopAllow this device to turn on computer is greyed out in device manager. I have accessed the bios, but did not see anything that looked like it pertained to this issue. I am far from a computer expert
View 3 Replies View RelatedSince a few days my PC developed an unusual behaviour: it goes to sleep mode at random intervals ! sometimes it does that at windows start up for several times...
I had microsoft security essential installed and read on some forums that it could be the reason for this problem: I unistalled that. Then I run online scanned from ESET nd Bitdefender: all clean.
Then I installed avas free edition (as I was without any anti-virus software). Did a complete system scan with no problem. I messed up with the power consumpion settings with no results.
The only solution I could find was to use the software "Dontsleep.exe" which I found googling around: it works ! I looked up all the running services and application at windows sturtup and disabled a lot of them with no results.
So this might be the wrong place for this thread but I didnt see a computer specific section so i picked this just incase it is related to my windows. Anyway the problem i am having is that every so often, more often then not actually, when my computer hibernates from inactivity, it cannot be woken up. I click the mouse, press everything on the keyboard and nothing will happen. I even try pressing the power button yet that does nothing. The power button just keeps blinking as normal when in sleep mode. I also tried Holding down the power button, in hope to force shutdown the computer but that did not work either. The only way anything happens is if i unplug the computer and then plug it back in. Unfortunately i know thats really bad for the computer but i dont really have a choice.[CODE]In addition, i have restored my computer to factory defaults, aswell as installed all the latest drivers
View 4 Replies View RelatedAfter putting my computer to sleep, upon waking I receive an error code, which should be present in the dump file. I closed the error window before copy pasting it in here. I will update the post with the error information next time it happens. This only happens when putting my computer to sleep. Hibernate and shutdown do not have this problem, and I have not received any BSOD's during use. This has been happening for about 10 days. My memory set up is kind of strange. I have 2x1GB 1.8V ram and 2x2GB 2.1V ram, both DDR2, and both running at 2.0V. I didn't want to overvolt the 1.8V ones too much. The timings are slightly loosened on the 2.1V ram to match those of the 1.8V ram. I have run Memtest86 with no errors. My hard drives have also checked out fine.I have my q6600 overclocked to 3.0GHz, with a voltage increase, CPU-Z is saying it is running at 1.408V. I have run plenty of Prime95 tests. No stability problems, and temperatures are always acceptable. I have had it at this overclock for 7 months, ran at stock the previous 4-5 years. My GTX 460 is overclocked as well, always has been stable as well, with temperatures plenty low enough.
View 1 Replies View RelatedIve been having a blue screen of death after reawakening my computer from sleep mode.It does not always happen but it happened 3 times already.I'm using windows 7 professional 64 bit full retail version
View 4 Replies View RelatedMy pc is shutting down more and more frequently so that it now happens every time I close the lid for sleep mode. In Event Viewer there are numerous "Event 41, Kernel Power" warnings.
View 2 Replies View RelatedI installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP. To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password. I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.
View 9 Replies View RelatedI am not savvy in this kind of stuff. My husband has a home built computer that runs our tv system with windows media center. He had to leave on a military deployment and right before he left he had to reinstall the OS. Since then the computer refuses to wake from sleep mode. I have to scram it to get it to come back up. Since we run the media center it ought to wake up to record automatically, but it isn't doing that either. I've checked all the power options but that doesn't seem to be the problem. Although, at this point, I really have no clue.
View 8 Replies View RelatedIs it normal that when my computer is in sleep mode that my cooling fans are running? They are always running.
View 2 Replies View RelatedFrom time to time Windows 7 will not go to sleep (only the display will turn off). I have searched various forums and tried the following fixes: I have already made sure that network adapters are not allowed to wake up the computer. I typed "POWERCFG -ENERGY" in the command prompt (as administrator) and an energy report was generated, which reported this error: System Availability Requests:System Required Request The service has made a request to prevent the system from automatically entering sleep.
Requesting Service Spooler Opening task manager, I see a process running called "splwow64.exe" -- is this the spooler preventing the computer from sleeping?
To prevent my computer from going out of sleep mode by itself I have to unplug my ethernet cable, that's 1 problem but I don't really care.
The other problem is when I come out of sleep mode, my DVD player opens by itself, I close it, and it reopens.
Windows 7 is freezing in sleep mode now... I don't think it's my drivers or anything because 2 updates earlier it worked fine. I'm wondering if anyone knows if this is an RC problem, or if something is wrong with my computer. I hope not since this computer is only 2 week old... There is like nothing on it and everything downloaded has been from a disk so no viruses (well except kasperky anti-virus but I HOPE that would be clean lol).
Basically when I put it into sleep manually, I cannot get it out, and my power/reset buttons do not work, I actually need to turn off the electricity.
Oh, and it's not my screen considering I CAN turn my screen on but it goes right back into powersave mode (sleep mode). I DID force it out once, and it said no signal from the computer even though the computer is on. This leads me to believe it is the OS (or god forbid one of my parts).
I just realized something... I have on HD connected via sata cable, but I took the power away from it (I wanted to hear something). I mean is that the possible cause? I doubt it though since it's not registered as an HD due to having no power... And my sound card light is on, so I'm assuming that is still on when I put the computer in powersave mode... Maybe that's an issue?
I am still having bug and freeze problems on all of the computers that I have been testing on since the first release in November.
I am currently testing both x64 and x86 versions on 4 of my PC's and still having minor bug issues, and the major freeze problem.
I do not Just use my PC's for e-mails, browsing the web and gaming. I primarily use them for Engineering Design Work and they need lots of resources to operate efficiently. My primary Base unit is the one I do most of my work on and the Most efficient Operating system on it is Windows XP x64 (sp2) and customized. (Not the Basic install of services and registry sets).
The freeze issue is random and it happens when my PC's go into sleep mode. Some times the will wake up normally, but way to often they will not wake at all, I have to force re-boot. And no error logs related to sleep mode issues, only the E-ID 41 (forced re-boot). This has happened on all the releases from 7000 to 7127, and now 7600, the releases from 7137 to 7229 never had this problem. And this has happened on all my test PC's including Laptops and Desktops.
I have tried many changes in settings for Power Settings (Advanced), Network Adapter Settings, Monitor settings.
Ideally I want my Network Adapter to stay Active on my main box so I can access files from my other computers any time I need them, I want my HDD's to go to sleep when not in use so they will live for a while. and My Monitors to shut down when not in use.
When system goes to sleep longer than a hour and you wake it up the bottom third of the screen freezing. The top 2/3's get split like window pane a when you scroll the top 2/s's will scroll but the bottom 1/3 will remain as it was before sleep. Also the bottom third wont have any hover icon effects though icon will still work, the task work as intended. If I restart the programs the will work fine but windows has to restart for icon hover effects to work.
View 2 Replies View Relatedif i am going to leave for about 1-2hours, should i put the computer to sleep mode or simply shut it down?
I was told that sleep mode warms up the computer also. So its not good to go sleep mode. Isit true?
When I try to put my computer to sleep, the screen goes into sleep mode, yet literally nothing happens with my tower. Then after a second or two, the monitor wakes back up and shows the login screen. I've tried checking powercfg /requests and -lastwake, and requests shows "None." across all topics, and lastwake says Wake History Count - 0.
View 1 Replies View RelatedI just built a mini ITX HTPC in a silverstone sg06 case (Zotac H55 ITX MOBO, 4GB DDR3 Ram, 32GB SSD, and intel i3 built in intel HD graphics)All works fine and I am very happy with it. I am using XBMC for my media program and I have the Logitech Dinovo Mini Wireless keyboard.. I use the SLEEP button when I am done watching a movie and when I want to watch a movie "lets say in a few days" I quickly press any button and instantly I am in XBMC again with my movies list.Does it use alot of power? IS it dangerous to leave pc on stancby overnight..? Is it harmfull for the hardware.?I have been reading mixed reviews.
View 8 Replies View Related
