Ive been having a blue screen of death after reawakening my computer from sleep mode.It does not always happen but it happened 3 times already.I'm using windows 7 professional 64 bit full retail version
After putting my computer to sleep, upon waking I receive an error code, which should be present in the dump file. I closed the error window before copy pasting it in here. I will update the post with the error information next time it happens. This only happens when putting my computer to sleep. Hibernate and shutdown do not have this problem, and I have not received any BSOD's during use. This has been happening for about 10 days. My memory set up is kind of strange. I have 2x1GB 1.8V ram and 2x2GB 2.1V ram, both DDR2, and both running at 2.0V. I didn't want to overvolt the 1.8V ones too much. The timings are slightly loosened on the 2.1V ram to match those of the 1.8V ram. I have run Memtest86 with no errors. My hard drives have also checked out fine.I have my q6600 overclocked to 3.0GHz, with a voltage increase, CPU-Z is saying it is running at 1.408V. I have run plenty of Prime95 tests. No stability problems, and temperatures are always acceptable. I have had it at this overclock for 7 months, ran at stock the previous 4-5 years. My GTX 460 is overclocked as well, always has been stable as well, with temperatures plenty low enough.
i am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.
I seem to be getting BSOD every time I come out of sleep mode with my new laptop (Asus G74SX-TH71). I put in an SSD did a clean install of Windows 7 Professional x64. I have disabled the bluetooth in device manager deliberately as I don't plan on using it.
I have a Dell Studio 17 laptop running Windows 7 Home premium 32 bit It was an upgrade from Microsoft as an OEM product to replace the original Dell Vista OEM OS
The laptop is 3 years old.
Whenever the system is pout into sleep or hibernation, or when the lid id closed, it does not enter sleep mode, but crashed. On restarting the usual error message ststing that windows did not shut down correctly is displayed.
In the last 2-3 months I've had about 10 of the BSOD. I am trying to debug them, I turned on verifier for non Microsoft drivers and now I have a crash dump. Here is the crashdump, with and without the verifier. I am using Dell XPS laptop, with Windows 7 Home Premium Service Pack 1, 64bits.
As of today I have been getting a BSOD on 95% of my start-ups from sleep mode (close lid or press power button - as I setup)I cannot figure this one out, please provide me with some insight.As per forum standards I have included the information below along with the attachments. Windows 7 . . .- x86 (32-bit) or x64 ? WINDOWS 7 HOME PREM OA 64Bit - the original installed OS on the system? YES, Re-installed on SSHD - an OEM or full retail version?Purchased it from retailer- What isthe age of system (hardware) New, just purchased (MSI X460DX) - What is the age of OS installation New, 1 week.
I've been getting a BSOD fairly regularly when trying to enter sleep mode. I attached all the seven forums info but if theres anything else you need let me know.EDIT - Ive been messing around with it a bit and it seems the the BSOD can appear when trying to go into sleep or hibernate mode. It shows up inconsistently in both modes.
I have been getting BSODs after waking my computer up after stand by. I've tried Googling the situation as well as performing basic troubleshooting tasks such as sfc, chkdsk, virus scans... no luck. According to the event viewer, it says :
"The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff8800f20044c, 0xfffff8800679e378, 0xfffff8800679dbd0). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 110112-8190-01."
I have noticed that my desktop will not enter sleep mode. Instead, the screen enter energy saving mode and the system continues to remain active for about 10 minutes before turning off. As long as my system does not enter sleep mode, it works just fine. According to the dump file, the issue is caused by ntoskrnl.exe and an errormessageDRIVER_POWER_STATE_FAILURE.
I am currently experiencing a BSOD after I put my computer into hibernate/sleep mode. Model: U46E-BAL6 ASUS, After I restart my computer, the windows crash report says the problem lies in my 080712-18283-01.dmp 080712-18283-01.dmp and a 2nd BSOD happened a little after, and the problem file is 080712-16395-01.dmp 080712-16395-01.dmp I have attached both files below, could someone take a look and solve the problem?
Some weeks ago I made a reinstall of my Win7 Home Premium x64 (a Dell M1330 with 4gb RAM). After then, my machine starts having random BSOD errors when going or recovering from sleep or hibernate mode. The error is a DRIVER_POWER_STATE_FAILURE, with code 0x0000009f.I attach here the info grabbed with W7F Diagnostic Tool, CPU z pictures and RAMmon html report. If it helps, here is the info I see with WinDbg looking the last minidump.
Code: Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:WindowsMinidump121412-26286-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available
I recently put together a new computer and installed Windows 7 on it. Everything seems to work fine, except when I resume using the computer after it goes to sleep, I get a BSOD. When I wake the computer up, it shows me the log-in screen, but when I click on my user profile to log in a blue screen appears. Also, it only seems to happen when the computer enters sleep mode on its own. If I put it into sleep mode, it wakes up with no problems.
I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode.System Specs:Windows 7Home Premiumx64 bitOEMThe entire system is a little under 2 weeks old.
Recently purchased a refurbished PC (last week) and have come across my first BSOD. I don't know the code of the BSOD. Basically what happened is, I was using Sony Vegas (a video editing software), put the computer to sleep (for around 10mins i think) and when I turned it back on I was instantly met with the BSOD. I really don't have any more info to divulge than that. I've been told my PSU is underpowered for this machine (405w) and I am currently in the process of purchasing a 650w PSU. Just throwing that out there, not sure if that has anything to do with the BSOD.
Specs: Processor: Intel Core i7-2600 Operating System: Windows 7 Home Premium 64bit RAM: 8 GB
I'm having a very annoying problem where my laptop will begin to enter sleep mode, but instead of powering down it keeps running for a few minutes and then crashes.When I start up my laptop again I get this
I keep getting BSOD when I try to put my 5 year old HP Pavilion dv6000 laptop in sleep mode, by either tapping the power button, or going through the start menu. This started happening a couple days ago, after Windows did an update.
I've done a system file check and it came up clean, and I also updated my video drivers, but to no avail. I don't really know where to go from here.
My problem is on a Media Center machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
MB: Asus P8H77-MLE CPU: Intel i3 2120 2x2 GB Kingston ram OCZ Agility 3 SSD 120 GB 1,5 TB WD Caviar Green Asus P7131 Tuner TERRATEC Cinergy DT USB XS Diversity Hauppauge! WinTV-NOVA-T-Stick-Diversity Hauppauge! Smart CI USB
My previous setup was with a AMD 240e. I use Microsoft Security Essentials for antivirus and have firewall turned on. The Media Center machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings. Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wake up is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity. I have made several new install and tried to exclude the SSD and install a 32 bit Win7 - but the BSOD still occurs 4-5 min after awake.
my computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.
So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.
My computer is Windows 7 64-bit, OEM version from Acer.
I am totally new to this and am really confused. About maybe a week ago I started having BSOD, plus Windows wouldn't restart after going into Sleepmode, and when I tried to Shut Down it would bring up the shut down screen then just keep "shutting down" with out ever shutting down.
So I read some internet stuff and "Reinstalled Windows 7" and seem to still have the issues.
I've had this Dell Studio 17 laptop for a few years now, and have ran into a few problems in the past. However, in the past few weeks, the computer seems to blue screen almost every time I close the lid and it enters sleep mode. This has not happened at all while the computer itself has been running. Here is the minidump file from this morning. All of the 8-10 minidumps since 12/11 seem to point to "ntkrnlmp.exe", if I'm reading that correctly.
DRIVER_POWER_STATE_FAILURE (9f) A driver has failed to complete a power IRP within a specific time (usually 10 minutes). Arguments: Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp subsystem.
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
I bought a new notebook running windows 7 64 bit a couple of months ago After running a full system scan with Kaspersky anti-virus a couple of days ago I now have a bug with sleep mode - After going into sleep mode, the user with my picture icon is locked meaning that I can't enter my password to log back in - the password box doesn't show.With the ASUS face recognition scanner I'm logged back in, but everything is 'buggy' e.g. if I click on the start button and hover over that entire area it goes into sleep again, or if i click on the bookmarks on chrome it doesn't show them, instead it click on an actual site within the bookmarks.After going into sleep the only way to enter and return to a normal state is to click the 'switch user' whereupon, my user picture icon reverts with the password boxI have tried a system restore but this didn't work.