BSOD After Waking Up From Sleep Mode, Freezing When Idle
Mar 12, 2012
my computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.
So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.
My computer is Windows 7 64-bit, OEM version from Acer.
I have been getting BSODs after waking my computer up after stand by. I've tried Googling the situation as well as performing basic troubleshooting tasks such as sfc, chkdsk, virus scans... no luck. According to the event viewer, it says :
"The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff8800f20044c, 0xfffff8800679e378, 0xfffff8800679dbd0). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 110112-8190-01."
I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode.System Specs:Windows 7Home Premiumx64 bitOEMThe entire system is a little under 2 weeks old.
When I put my computer in Sleep mode, using the start button / shutdow / sleep it "sleeps" for about 10 minutes and wakes up on its own! Could it be programs trying to run in the background that wakse it up; Carbonite Backup or Norton? I can't get the computer to remain in sleep mode!
My computer crashes right after it wakes up from sleep mode.I used MSDaRT to diagnose the problem, and obtained a Analysis.log file, but I can't figure out where the problem is.Here is a copy of the contents of the file:
Code: Opened log file 'C:Windowsmsdart_crashanalyzer_kd_ansi.log' Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:WindowsMEMORY.DMP] Kernel Summary Dump File: Only kernel address space is available
I get intermittent freezing on waking from sleep mode, and indeed occasionally it wakes up immediately after sleeping.
I looked in the event manager and after 2 separate occasions of it freezing on waking up, it's come up with vwififilt as the culprit. I hope I've uploaded a screengrab correctly.
I can't find anything online which distinguishes why this file is not loading and causing a freeze on waking from sleep mode.
Any ideas on what I can do to remedy this problem? And also why I might be getting this sporadic problem of the system waking immediately after sleeping?
I have been using sleep mode for a while. Until recently, I had to re-install my OS due to some troubleshooting and hardware issues. Now my PC won't wake up from sleep mode with the new install. She goes to sleep, and when I try to wake her up, she powers on, for like 2 seconds and then shuts off. I have to turn on the power switch to get it to boot. My pc is not a generic brand pc. It's a custom built water cooled pc. I haven't noticed any new driver installs. I have performed a clean start up with no insight to what the issue could be. Event viewer only shows what I expected.
The system has rebooted without cleanly shutting down first. - Event 41, Kernel Power Session "Microsoft Security Client OOBE" stipped due to the following error: 0xc000000D Event 3, Kernel-Event Tracing
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up, record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
I have the TP-Link USB Wireless adapeter (TL-WN722N) It always reconnects after sleep mode or I have to do it manually and it takes a long time to reconnects all the time?
***DO NOT say to uncheck " Allow the computer to turn off this device to save power" option! This DOES NOT work for me and it has no effect whatsoever!***
7 x64 goes in/out of Sleep Mode successfully, but Aero Peek's visual effects disable approx. 2 sec. after the system wakes. If I log out/on the effects are still disabled; I have to reboot to establish.
Phenom 9850 x4 2.5 GHz GeForce 9600 GS
* I also have issue with right-clicking and Explorer crashing, however mine only occurs when I right-click on the Recycle Bin, and only after my computer has been running for awhile and I am recycling multiple files.
I had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time I wake up my computer, the ipv6 cannot work. The appearance is that I can't ping and access ipv6 website. But after some research, I realize that only the DNS part is broken. When I ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if I use nslookup, I can find the ipv6 address. And the following are my tries:
ping ipv6.google.com -- not work ping 2a00:1450:8001::68 -- does work, the ip is the ipv6.google.com address ping -6 ipv6.google.com -- does work like the above
When I try to wake my machine from S3 sleep mode I see the hard drive lights power up but nothing happens, I get a black screen for about 5-6 seconds then my machine proceeds to boot loop itself until i manual shut it down with the power button. Sometimes it will start up regularly with no problems, and about 60-70% of the other times it will do the problem i have explained above.
Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
OK, I've read all about Windows 7 sleep mode and (think) I understand everything I've read. What I have not seen in my research and do not understand is why my PC enters sleep mode when it is not idle!
For example, I start a disk backup to an external drive, close the lid on my laptop (yes, I have set the sleep setting "do nothing" when the lid is closed), and then leave the computer to "do it's thing". The backup normally takes at least 15 minutes to run. However, my Windows 7 enters sleep mode within minutes while the backup job is running. Why?
This same problem occurs no matter what program I'm running - backup, video conversion, defrag, etc etc. It seems that if I'm not using the mouse or keyboard, sleep mode is activated no matter what is currently running on my PC.
Yes, I want to utilize the Windows 7 sleep mode feature. No, I don't want sleep mode activated while my computer is busy running a job!
My computer will BSOD after waking up from it's sleep. Now it wasn't a usual occurrence, it just lagged but lately it always went to blue screen after waking up.I checked, there are no Flash Drives plugged in, but the USB for the wireless mouse is plugged in but that never had any affect before.
I've tried removing AVG using their removal tools and instructions. I've tried fully removing my video and mobo drivers with driver sweeper and installing the latest GPU and Motherboard drivers and flashed the latest Motherboard BIOS. I've scoured forum after forum and seen similar issues and tried countless solutions. I haven't seen someone with my -exact- problem and -exact- spec/error reports so I'm caving lol. I build and maintain PC's as a hobby and I like to solve problems on my own know-how but I am at wits end with this BSOD.
Quick specs: Windows 7 Ultimate 64-bit 8 gigs DDR3 Gskil AMD Phenom II X4 955 Denab Nvidia GeForce GTS 250 (x2 SLI) Asus M4N75TD nForce 740a Malwarebytes Antimalware
I sometimes will wake up my computer and it restarts itself, it gives me this error upon startup again.
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 1e BCP1: FFFFFFFFC0000046 BCP2: FFFFF80002EFBEC8
BSOD on an Acer Aspire 5750. It is pretty much brand new, but I have been trouble shooting this for about 3 weeks and have just now learned about the dmp files but am not yet good at reading them.
BlueScreenView seems to point to some kernel exe that is at the very core of Windows 7, but from what I have read it is most surely a driver as it only happens when waking up from sleep.
I just did a fresh install of Windows 7 64bit on my computer and am having a bit of a problem, whenever I put the computer to sleep and wake it up it gives me the BSoD with intelppm.sys as the cause. Does anyone know what this driver is and what it does, any update to stop BSoD etc... Before the fresh install it worked fine with no BSoD, I have check for viruses, I have also installed the drivers I installed before. [code]
I have a HP Pavillion dv6 which originally came with Windows Vista Home Premium x32, recently upgraded to Win 7 x64 clean install, and has been relatively problem-free. But, everytime laptop sleeps, I get a BSOD upon waking up every single time! updated all drivers to latest (compatible with win 7 x64). even updated BIOS. d
About 2 months ago I started getting random freezes and would have to do a hard restart on my computer to restart. To see if it was a virus or any kind of malware, I did a clean reformat of my hard drive and was still having issues. Eventually it started taking forever to boot up and load files and I got a SMART status bad message. So I wound up replacing my hard drive with a brand new one and did a clean install of Windows 7. That seemed to fix the slow boot and file load times but now I'm still getting freezes. However they are not random. They seem to happen when I don't touch the computer for awhile, whether I have a program such as something downloading in the background or not. They also seem to happen when I close the computer and put it to sleep and leave it like that for awhile. I try to wake it up and I only get a black screen, however my computer is on as I can hear the components.
The strange thing is as long as I am actively using the computer it doesn't seem to do this. I was on it for about 6 hours yesterday night and nothing happened and the computer was working fine. I did various hard disk scans even though I know it can't be the hard drive seeing as I just replaced it. It also isn't my graphics card as I uninstalled the driver and let my computer run for awhile with the standard VGA adapter and it still froze after me not touching it for awhile. I also did a windows memory diagnostic scan and nothing came up. I'm thinking there are 2 seperate problems with my computer, one that I fixed by replacing the hard drive (the slow boot time and file loading times, it took me 20 minutes to open up windows explorer, it doesn't anymore.) and another that I am unsure of. Should I do more memtest passes? I heard that one is not enough and that you should do up to 7 to make sure your RAM isn't faulty.
Here are my computer specs: Model: Samsung R780 OS: Windows 7 Home Premium (64-bit) Processor: Intel Core i5 2.27 GHZ RAM: 4GB DDR3 Graphics Card: Nvidia GeForce GT 330M (1GB Video Memory) Hard Drive: 500 GB Hybrid SATA/Solid State (4GB of solid state memory), this is the new hard drive that I purchased.
I tried downloading updates for a game and it immediately froze. So maybe the freezing is still happening on a random basis...
I have been getting BSOD on my laptop for over a month now. It only ever happens upon waking up from sleep, never when starting it up. I've tried to used System Restore but I don't have any restore points that go far back enough. I have tried resetting to factory settings but the same problem has happened again, not sure if it's the same incident because I'd have thought a reset would have solved it, so likewise I'm not sure another reset will change anything. I've done scans with multiple anti-viruses (obviously no two at the same time), and I apparently I don't have a virus. I thought it might have something to do with the registry so I scanned for problems in the registry in both CCleaner, but despite what it tells me, nothing has changed. I also did scans with AVG PC Tune-Up which didn't do anything, either. I was considering booting from an OS disk but I only want to do that as a last resort, and if it's going to work.
Aside from BSOD, other problems include the Flash container plugin crashing midway though Flash videos (which can't be down to Flash player, because I have the latest version), playback lagging in Media Player Classic Home Cinema, even though I have the CCCP codec pack installed, and lastly when playing games, sometimes the .exe will crash or the game will jitter, even offline games, even on low graphic settings, even with the latest graphic card drivers installed.
Windows 7, 64 bit. It's the original OS. I'm not sure what the difference between OEM and full retail is but I got this the way it was in the shop. I haven't added anything. The age is roughly a year old and I haven't reinstalled the OS.I got the BSOD twice a month or two apart about 2-3 months ago. However, it happened once yesterday, and twice today. The second time I got the error 0x8000ffff but I was able to do a system restore. I usually keep my laptop on for days... I used to do that with my previous laptop and I never had any problems so I don't know if that's what's causing the BSOD.
After putting my computer to sleep, upon waking I receive an error code, which should be present in the dump file. I closed the error window before copy pasting it in here. I will update the post with the error information next time it happens. This only happens when putting my computer to sleep. Hibernate and shutdown do not have this problem, and I have not received any BSOD's during use. This has been happening for about 10 days. My memory set up is kind of strange. I have 2x1GB 1.8V ram and 2x2GB 2.1V ram, both DDR2, and both running at 2.0V. I didn't want to overvolt the 1.8V ones too much. The timings are slightly loosened on the 2.1V ram to match those of the 1.8V ram. I have run Memtest86 with no errors. My hard drives have also checked out fine.I have my q6600 overclocked to 3.0GHz, with a voltage increase, CPU-Z is saying it is running at 1.408V. I have run plenty of Prime95 tests. No stability problems, and temperatures are always acceptable. I have had it at this overclock for 7 months, ran at stock the previous 4-5 years. My GTX 460 is overclocked as well, always has been stable as well, with temperatures plenty low enough.
Ive been having a blue screen of death after reawakening my computer from sleep mode.It does not always happen but it happened 3 times already.I'm using windows 7 professional 64 bit full retail version
i am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.
I seem to be getting BSOD every time I come out of sleep mode with my new laptop (Asus G74SX-TH71). I put in an SSD did a clean install of Windows 7 Professional x64. I have disabled the bluetooth in device manager deliberately as I don't plan on using it.
I have a Dell Studio 17 laptop running Windows 7 Home premium 32 bit It was an upgrade from Microsoft as an OEM product to replace the original Dell Vista OEM OS
The laptop is 3 years old.
Whenever the system is pout into sleep or hibernation, or when the lid id closed, it does not enter sleep mode, but crashed. On restarting the usual error message ststing that windows did not shut down correctly is displayed.
