Screen Stays Black After Waking Computer From Sleep Mode
Oct 31, 2012
Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
View 5 Replies
ADVERTISEMENT
Jul 9, 2012
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up, record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
View 6 Replies
View Related
Nov 10, 2011
when I put my PC in sleep mode and wake it up I get a black screen which forces me to restart the PC.
View 8 Replies
View Related
Jan 17, 2012
My computer crashes right after it wakes up from sleep mode.I used MSDaRT to diagnose the problem, and obtained a Analysis.log file, but I can't figure out where the problem is.Here is a copy of the contents of the file:
Code: Opened log file 'C:Windowsmsdart_crashanalyzer_kd_ansi.log'
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available
[code]......
View 4 Replies
View Related
Mar 21, 2012
I have a Sony Vaio VPCSB11FX/W laptop. I lock the screen (it's password protected too) and close the lid when I need to get up to do something else while using it. Usually, the blue Windows 7 lock screen shows up when I open the laptop, but just now, I got a black screen that wouldn't respond to any buttons, so I shut the laptop down manually by holding down the power button. When I booted up and logged in, I got the old 'Windows was shut down unexpectedly' message.
Just curious, why did I get the black screen? Also, the power button was green, which means it wasn't in sleep mode at all, and the laptop's fan was whirring loudly too. This has happened to me a couple of times before, and I usually wait at least 30-60 seconds for the black screen to respond before shutting down, though the fan makes a louder noise the longer I wait. This happened even though the lid was closed properly.
View 2 Replies
View Related
Jun 6, 2010
For the past several mornings, when clicking my mouse to wake my PC from sleep mode, my screen remains completely black. I can hear the PC start up, the fan running, etc. I can even hear the Windows log on sound when I punch in my password. All power lights are on, but the monitor refuses to display anything, not even a blinking cursor.My keyboard then becomes unresponsive and I'm unable to shut my PC down using the power button. I've had to hard reboot several times by manually switching my surge protector off and on. After getting the expected message that Windows didn't shut down properly, my system then starts up as usual. I have Windows 7 Home Premium (64 bit). My processor is an AMD Athlon II X4 630 and I have 6 GB of RAM. Both my PC and monitor are brand new.
View 3 Replies
View Related
Jul 21, 2009
I installed windows 7 a few days ago, everything seemed to run fine until this morning. Last night i updated windows because some updates where finished, during shutdown the update was installed. This morning i turn on my computer, it beeps once(loud beep not a soft beep) The screen doesnt flicker and goes into sleep mode.
I tried disconnecting the videocard and reconnecting the wires, still doesnt work. I pressed F2, F8, F12, doesnt go to BIOS screen or Boot. I have no idea how to get the connection back. Has anyone has this problem and can help me find a solution.
View 2 Replies
View Related
Nov 20, 2010
I'm having a problem where if my laptop is idle and the screen goes black, I can't get it to resume. I try moving the mouse and hitting buttons, but nothing happens. I have to completely shut the PC off and start it again. Also, if I put it to sleep, the same thing happens (it goes black but doesn't sleep or resume). My drivers are all up to date but it still happens.
View 8 Replies
View Related
Jul 9, 2012
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up,record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
View 9 Replies
View Related
Oct 12, 2011
When I put my computer in Sleep mode, using the start button / shutdow / sleep it "sleeps" for about 10 minutes and wakes up on its own! Could it be programs trying to run in the background that wakse it up; Carbonite Backup or Norton? I can't get the computer to remain in sleep mode!
View 4 Replies
View Related
Nov 2, 2012
I have been getting BSODs after waking my computer up after stand by. I've tried Googling the situation as well as performing basic troubleshooting tasks such as sfc, chkdsk, virus scans... no luck. According to the event viewer, it says :
"The computer has rebooted from a bugcheck.
The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff8800f20044c, 0xfffff8800679e378, 0xfffff8800679dbd0).
A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 110112-8190-01."
View 2 Replies
View Related
Jan 17, 2012
I get intermittent freezing on waking from sleep mode, and indeed occasionally it wakes up immediately after sleeping.
I looked in the event manager and after 2 separate occasions of it freezing on waking up, it's come up with vwififilt as the culprit. I hope I've uploaded a screengrab correctly.
I can't find anything online which distinguishes why this file is not loading and causing a freeze on waking from sleep mode.
Any ideas on what I can do to remedy this problem? And also why I might be getting this sporadic problem of the system waking immediately after sleeping?
View 9 Replies
View Related
Mar 13, 2012
I have been using sleep mode for a while. Until recently, I had to re-install my OS due to some troubleshooting and hardware issues. Now my PC won't wake up from sleep mode with the new install. She goes to sleep, and when I try to wake her up, she powers on, for like 2 seconds and then shuts off. I have to turn on the power switch to get it to boot. My pc is not a generic brand pc. It's a custom built water cooled pc. I haven't noticed any new driver installs. I have performed a clean start up with no insight to what the issue could be. Event viewer only shows what I expected.
The system has rebooted without cleanly shutting down first. - Event 41, Kernel Power Session "Microsoft Security Client OOBE" stipped due to the following error: 0xc000000D Event 3, Kernel-Event Tracing
View 1 Replies
View Related
Apr 24, 2012
I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode.System Specs:Windows 7Home Premiumx64 bitOEMThe entire system is a little under 2 weeks old.
View 1 Replies
View Related
Nov 27, 2012
I have the TP-Link USB Wireless adapeter (TL-WN722N) It always reconnects after sleep mode or I have to do it manually and it takes a long time to reconnects all the time?
***DO NOT say to uncheck " Allow the computer to turn off this device to save power" option! This DOES NOT work for me and it has no effect whatsoever!***
View 3 Replies
View Related
Mar 12, 2012
my computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.
So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.
My computer is Windows 7 64-bit, OEM version from Acer.
View 3 Replies
View Related
Nov 22, 2009
7 x64 goes in/out of Sleep Mode successfully, but Aero Peek's visual effects disable approx. 2 sec. after the system wakes. If I log out/on the effects are still disabled; I have to reboot to establish.
Phenom 9850 x4 2.5 GHz
GeForce 9600 GS
* I also have issue with right-clicking and Explorer crashing, however mine only occurs when I right-click on the Recycle Bin, and only after my computer has been running for awhile and I am recycling multiple files.
View 9 Replies
View Related
Mar 2, 2010
I had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time I wake up my computer, the ipv6 cannot work. The appearance is that I can't ping and access ipv6 website. But after some research, I realize that only the DNS part is broken. When I ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if I use nslookup, I can find the ipv6 address. And the following are my tries:
ping ipv6.google.com -- not work
ping 2a00:1450:8001::68 -- does work, the ip is the ipv6.google.com address
ping -6 ipv6.google.com -- does work like the above
View 2 Replies
View Related
Mar 29, 2012
When I try to wake my machine from S3 sleep mode I see the hard drive lights power up but nothing happens, I get a black screen for about 5-6 seconds then my machine proceeds to boot loop itself until i manual shut it down with the power button. Sometimes it will start up regularly with no problems, and about 60-70% of the other times it will do the problem i have explained above.
View 1 Replies
View Related
May 23, 2012
W7 will start up, load files, and then stay at a black screen with a mouse. I think that the hard drive may have gone bad, and when I did a memory diagnosis, I have found that there is bad memory with my main hard drive. I do not have the original disk, nor can I access any of the files. I tried system Recovery, but it would not list W7 as an option. If someone knows where I could find those drivers to load onto a disk, that would be great. My computer is a Dell Studio 1535.
View 3 Replies
View Related
Oct 24, 2012
I have Windows 7 on my laptop and after I start it up and enter my password to login to windows I have to wait another 10-15 minutes for my desktop to appear. It's just a black screen, but the kicker is that I can move my mouse and see it on screen.
View 1 Replies
View Related
Jan 12, 2012
If I close my laptop, half the time, the computer freezes after I put in my password. It just gets stuck on the welcome screen with the spinning wheel. It doesn't always happen, but I have to do a hard reset everytime it does. I already set the HD to never turn off, so I am just wondering what else i can do to stop this freezing?
View 6 Replies
View Related
Nov 8, 2012
I recentley downloaded an alarm clock program by the name of '' Alarm Master Plus '' in evaluation trile. when I shut my computer off, instead of shutting it down I ask for the computer's sleep mode or '' Mettre en veille '' option (in french). The next morning I always find myself in front of the a screen which has two buttons.One says '' Verrouiil� '' (locked), and the other one says '' change user '' . When I click on the '' Locked '' button I find myself on my desk with my alarm starting '' Always late
View 1 Replies
View Related
Dec 1, 2012
I have a
Lenovo Laptop Thinkpad Edge E520
8GB RAM
Intel CPU B960
Pentium Processor 2.2GHZ
Recently when I have powered up my laptop it occasionally doesn't load properly, the screen stays black. You can hear the laptop working fine but you cannot see anything. This happens once or twice a week, I usually hold on the power button for 5 seconds, then reboot and it resumes my hibernate settings as usual. Could this be because I always hibernate my laptop?
View 2 Replies
View Related
Nov 25, 2011
We have about 500 laptops with win 7 pro x64. We have had a few complaints that on occation, after a computer wakes up from sleep mode, the user sees the welcome screen, but no text or logon box - i.e. they can't se any text or textboxes, only the background image of the welcome screen. The only way to end this state is to poweroff/reset the machine.
View 1 Replies
View Related
Feb 20, 2010
Another problem with this damn windows 7. Had problems with my windows 7 going blank in my previous post but now i put my laptop to sleep; switch it back on and when i log in, it does blank but you can see and use the cursor but it keeps flashing. alt-ctrl-del is still available. just performed a scan with kaspersky and no problems. can anyone help? anyone experience this?
View 2 Replies
View Related
Sep 26, 2010
I have a problem since I installed Windows 7 on my laptop.Whenever the laptop automatically goes to sleep or hibernation mode while the lid is closed, it wakes up with the screen black. The only thing I figured out to do is switching it off and starting it newly then. I already updated my graphics driver (ATI Radeon X1200 Series). Maybe there's a problem there because the Catalyst Control Center which is apparently supposed to configure the graphics does not work together with the most current driver. But except for the black screen I never had a problem with that.
View 1 Replies
View Related
Jul 25, 2011
My computer will BSOD after waking up from it's sleep. Now it wasn't a usual occurrence, it just lagged but lately it always went to blue screen after waking up.I checked, there are no Flash Drives plugged in, but the USB for the wireless mouse is plugged in but that never had any affect before.
View 7 Replies
View Related
Sep 23, 2011
I have a homebuilt system that I have had for a little over a year now. I am currently having an issue when waking my computer from sleep. When I wake the computer, I can see the machine turn on and start up (LED fans light up) but the monitor stays black. It stays like that and my only option is to do a hard reset.
After resetting the computer, it says its resuming windows and lets me login, but it runs very slow for a while. On my next restart, the computer "checks the disk for consistency", and then after that everything is normal again.
This doesn't happen every time I put it to sleep, but it has been happening a lot lately. I had this issue last year, but it just stopped, and i can't remember if I had done anything to fix it. I did not have this problem again until sometime last week. The only thing I did last week was I installed the new drivers for my video card and uninstalled/reinstalled MSI afterburner.
View 33 Replies
View Related
Oct 15, 2011
Recently I built a computer for my friend. After running it through some typical diagnostics, I concluded that it was fine. Two days later he called me and told me that the PSU was making weird noises. That's when his first BSOD happened. It was pretty obvious that the PSU was done, and he RMA'd it back. When the new one came back it was working fine, but after a few days he called me again and said that it was BSOD'ing a lot. I checked it out and it seemed to happen a few minutes after waking up from sleep mode. It happened every time. At first I thought it could have been a hard drive problem so he RMA'd that. When the new one came back it was the same story.
View 4 Replies
View Related
Nov 5, 2012
I don't know if it's Microsoft's bad OS or this crumby Korean computer - but it sucks to be back with Windows after a decade of Macintosh!This computer randomly fails to wake up. The mouse icon moves, but my screens are all black. I can control-alt-delete to raise the task manager screen. But then clicking does NOTHING.Windows is a **** OS. I hate it. It's always pissed me off since Bill Gates "created" it. Click click click - are you sure you want to click? Why don't you click some more? click click click. Would you like to click again? Are you sure you'd like to click again? And how about all those REALLY helpful popup windows.So thoughtful and caring.Oh yeah, windows. That's why. Such vision.Bill Gates has NO TASTE! I wish Steve Jobs was still alive!here are so many stupid bugs in this system.It reminds me of Millennium Edition. DOes anyone remember that BS? If I didn't need this shite for work I'd burn it. Or enjoy hacking it to bits with an axe.Can anyone help me sort this out? Or am I doomed to continually click stupidly until my tendons freeze up with carpal tunnel and my eyes fall out from staring at the ugly designs everywhere?Lastly, there's an infuriating naming bug - sometimes Windows 7, so intelligently designed, believes a file is open when it is not. Windows won't let you change the name of a file or folder if it believes a file in that folder is open. Brilliant. So, guess what? Yeah, I can't change the effing file name and have to shut down the computer. Since I work in a firm with a high volume of files changing names frequently, I can't tell you how much this pisses me off.Somebody get Windows to hire someone with creative vision who understands how to streamline operations! Someone teach Bill Gates how to paint a picture!In the meantime, I'm going to work on convincing my entire office to move to Mac.
View 3 Replies
View Related