Black Screen With Error Message Instead Of Sleep Mode?
Jul 9, 2012
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up,record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
View 9 Replies
ADVERTISEMENT
Mar 21, 2012
I have a Sony Vaio VPCSB11FX/W laptop. I lock the screen (it's password protected too) and close the lid when I need to get up to do something else while using it. Usually, the blue Windows 7 lock screen shows up when I open the laptop, but just now, I got a black screen that wouldn't respond to any buttons, so I shut the laptop down manually by holding down the power button. When I booted up and logged in, I got the old 'Windows was shut down unexpectedly' message.
Just curious, why did I get the black screen? Also, the power button was green, which means it wasn't in sleep mode at all, and the laptop's fan was whirring loudly too. This has happened to me a couple of times before, and I usually wait at least 30-60 seconds for the black screen to respond before shutting down, though the fan makes a louder noise the longer I wait. This happened even though the lid was closed properly.
View 2 Replies
View Related
Jun 6, 2010
For the past several mornings, when clicking my mouse to wake my PC from sleep mode, my screen remains completely black. I can hear the PC start up, the fan running, etc. I can even hear the Windows log on sound when I punch in my password. All power lights are on, but the monitor refuses to display anything, not even a blinking cursor.My keyboard then becomes unresponsive and I'm unable to shut my PC down using the power button. I've had to hard reboot several times by manually switching my surge protector off and on. After getting the expected message that Windows didn't shut down properly, my system then starts up as usual. I have Windows 7 Home Premium (64 bit). My processor is an AMD Athlon II X4 630 and I have 6 GB of RAM. Both my PC and monitor are brand new.
View 3 Replies
View Related
Jul 21, 2009
I installed windows 7 a few days ago, everything seemed to run fine until this morning. Last night i updated windows because some updates where finished, during shutdown the update was installed. This morning i turn on my computer, it beeps once(loud beep not a soft beep) The screen doesnt flicker and goes into sleep mode.
I tried disconnecting the videocard and reconnecting the wires, still doesnt work. I pressed F2, F8, F12, doesnt go to BIOS screen or Boot. I have no idea how to get the connection back. Has anyone has this problem and can help me find a solution.
View 2 Replies
View Related
Jul 9, 2012
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up, record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
View 6 Replies
View Related
Nov 20, 2010
I'm having a problem where if my laptop is idle and the screen goes black, I can't get it to resume. I try moving the mouse and hitting buttons, but nothing happens. I have to completely shut the PC off and start it again. Also, if I put it to sleep, the same thing happens (it goes black but doesn't sleep or resume). My drivers are all up to date but it still happens.
View 8 Replies
View Related
Oct 31, 2012
Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
View 5 Replies
View Related
Jul 31, 2011
It is a packard bell with windows 7, bought from a large electrical chain, so no support there -it didnt have a restore disk but I have downloaded one, and also made one from daughters laptop. The screen is black with white warning saying BOOTMGR is missing, press Ctrl+Alt+Del to restart, When i do this the same happens. I have pressd F12 and booted from downloaded disk.first i get a black screen saying windows loading. then a grey box tha says system recovery options and keyboard input method - a drop down option - i choose united kingdom and hit next.
View 9 Replies
View Related
Aug 15, 2012
I am getting an error message on a black screen saying my Windows 7 is not genuine?
View 4 Replies
View Related
Apr 15, 2011
I am having this blue screen error often occurs during resume from hibernate or sleep. Have been reading bleeping computers.com and figured out where to find the error report, and pasted it below. NO hardware or software changes done, everything seems to be updated from the update advisory. Please help me find a solution, it's getting annoying to have a computer these days and slightest problem.
View 1 Replies
View Related
Sep 14, 2011
The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.
The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.
I have already tried: displayswitch /extend displayswitch /internal in a .bat file
using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.
Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)
View 9 Replies
View Related
Oct 31, 2009
When I turn my machine on I get the Windows logo, then the screen goes black and a text message advising me that a disk check is occurring, and if I want to skip it I have to hit any key in X... seconds. If I let it run, it eventually goes to all black on the screen, the disk runs and runs - I let it run for two days once - and nothing happens.
If I "hit any key" as instructed it goes to the Windows boot and all appears to be well. I guess I shouldn't complain, but I really hate the whole "disk check" screen thing, and would like to get rid of it. How can I do that?
View 4 Replies
View Related
Nov 10, 2011
when I put my PC in sleep mode and wake it up I get a black screen which forces me to restart the PC.
View 8 Replies
View Related
Jun 18, 2012
after the computer is left for a while and goes to sleep on waking the screen goes black and stays black. If the computer doesnt go to sleep i can log in with no issue. so far my only remedy is to restart the computer and sometime even I need to unplug the power.
View 1 Replies
View Related
Sep 4, 2009
I have a problem with the hybrid sleep mode.
Whenever I try to put my notebook in sleep mode everything works ok, also normally waking up the system.
But when I disconnect the power cord and restart the system, Windows tries to resume its state but suddenly stops with a black screen and a blinking cursor.
I have absolutely no problems with normal sleep and normal hibernate (shutdown -h).
For a short time hybrid sleep worked only when I put the system to sleep with the notebook FN keys, but not through the Win start menu.
Now it doesn't work at all. Maybe this was also just a coincidence.
Can anyone help me?
View 8 Replies
View Related
Jun 13, 2011
I've had my sony vaio F126 for about 3 months now and today a blue screen popped up. Now whenever I restart my computer, I only see a black screen with "operating system found." I don't have any important files on there that I need.
View 3 Replies
View Related
Aug 21, 2012
I am painstakingly trying to transfer some files by a flash memeory stick.Asked where I want them to be sent, I inadvertently pressed 'Picasa'. Now all I get is a small black screen with a message saying the image cannot be accepted. (Cannot remember exact phrasing).
View 1 Replies
View Related
Aug 8, 2011
i have an HP Pavillion dv7 with windows7. It is less then 3 months old. Problem- Yesterday the screen went black while i was watching a video, but the sound kept going. so i restarted the computer, and the screen works until you get to the login screen it goes black again. SO i called customer service at hp, and we worked on it for an hour.THe one thing that seems to work is when i go to the device manager, uninstall the display adapters, and restsart in normal mode, then i go and reinstall the ATI device thing in the recovery manager, but everytime after i reinstall the ATI display device thing, it ends up going black a little while later again. lol
View 3 Replies
View Related
Feb 17, 2012
My laptop will start up with the black 'starting windows' window and then go to the blue screen where it says administrator with an icon. When I click on it it says it's loading then the screen goes black and a little message pops up saying 'windows could not complete the instillation. To install windows on this computer restart the instillation.' when I press my only option which is 'OK' my laptop logs off and shuts down. This keeps happening every time I turn it on.
View 1 Replies
View Related
Apr 22, 2012
About 6 months ago I had several issues with my screen flickering. I thought it was just an old monitor so I replaces it. No problems, however the last 48 hours my screen goes black then sometimes it will come back on and say that my display driver crashed. I've tried looking around but i see no error reports or anything on the driver. I am using a NVIDIA GeForce 7600 GS. I just uploaded the complete system specs to the website.
View 1 Replies
View Related
May 5, 2011
When launching XP Mode, it takes forever then finally gives me "Could Not Enable Integration Features". If I continue the XP mode window pops up, but none fo my previous drives are there. Worked fine until last week.
View 1 Replies
View Related
Jan 24, 2013
Whenever I put my computer into sleep mode I press the power button once to get it out of sleep mode but when it comes up it has a blue screen with a bunch of errors on it. My computer is custom built. It is a AMD Dual Core (64-Bit) Fresh install of Windows.
View 7 Replies
View Related
Jun 16, 2011
I have tried searching online for solutions but to no avail. My laptop is just under 12 months old and other than the battery dying already I have never really had any problems until last week. Its a Dell Inspiron 1564, Intel I3 running windows 7 home premium.After my computer has been woken from sleep mode any window I open in full size no longer sits flush with the top of the monitor (its about a cm below top of screen), but my desktop background is still normal and reaching the top of the monitor and I can put my cursor up there. I have updated my video and BIOS drivers from the Dell website yesterday but that doesnt seem to have done anything. If I restart my computer it goes back to normal again until the next time it sleeps but I would really rather not have to turn my computer on and off 15 times a day?
View 4 Replies
View Related
Jul 6, 2012
I recently put together a new computer and installed Windows 7 on it. Everything seems to work fine, except when I resume using the computer after it goes to sleep, I get a BSOD. When I wake the computer up, it shows me the log-in screen, but when I click on my user profile to log in a blue screen appears. Also, it only seems to happen when the computer enters sleep mode on its own. If I put it into sleep mode, it wakes up with no problems.
View 3 Replies
View Related
Jan 12, 2012
If I close my laptop, half the time, the computer freezes after I put in my password. It just gets stuck on the welcome screen with the spinning wheel. It doesn't always happen, but I have to do a hard reset everytime it does. I already set the HD to never turn off, so I am just wondering what else i can do to stop this freezing?
View 6 Replies
View Related
Feb 3, 2010
I put my laptop in sleep mode before leaving to star bucks.I open my laptop and press the power buttonThe internal fans start turning as well as the disc drive, but the screen remains blank.I have heard that Windows 7 has multiple issues with the sleep mode, and I'm pretty sure laptop is now stuck in hybrid sleep? Also, I noticed that there is a hotfix for this provided by microsoft, but I would have no way to use this since my computer cannot get stuck out of this. After Researching this, I heard some people taking out the battery and holding the power button down for 30 seconds, then running it off of a/c power.
View 9 Replies
View Related
Nov 8, 2012
I recentley downloaded an alarm clock program by the name of '' Alarm Master Plus '' in evaluation trile. when I shut my computer off, instead of shutting it down I ask for the computer's sleep mode or '' Mettre en veille '' option (in french). The next morning I always find myself in front of the a screen which has two buttons.One says '' Verrouiil� '' (locked), and the other one says '' change user '' . When I click on the '' Locked '' button I find myself on my desk with my alarm starting '' Always late
View 1 Replies
View Related
Dec 9, 2012
During the day, if we leave the computer alone, screen goes black, after a while, fans turn off. Wireless mouse wakes it up just fine. Fans startup before the screen is completely ready to go. During the night, the screen is dark, but the fans almost never stop. Why?
View 9 Replies
View Related
Apr 18, 2012
I've been having a problem with Windows 7 recently on my new computer that I just got a couple weeks ago. The problem is that my computer will have a blue screen error when waking from sleep mode. I don't see the blue screen at all, instead, when waking from sleep mode, I see the BIOS screen and then it goes through the typical startup process as if the computer had been powered OFF instead of put into sleep mode (however, I know it was properly in sleep mode, as the power light on my tower flashes continually rather than shutting off during this mode). I get the message that Windows did not shut down properly and have the option to boot into safe mode, etc. When I boot back into normal mode I receive a message in Windows saying windows has recovered from an unexpected shut down. [code] However, when I tried to install the hotfix, I was given the message "This update does not apply to your system", which I have read may be an indicator that the update has already been installed? I have run Chkdsk on drive C successfully, and I have installed every available windows update as of today (Apr 14, 2012)
View 14 Replies
View Related
Aug 30, 2012
Switched from XP to windows 7 home basicMy system :Operating system : windows 7 home basic (original)mother board :Asus P5B Mx wifi apProcessor : intel dual core , 1.6 GhzRam : 3 gb ddr2Problem : Once i put my system on sleep , on switching on, it does not display screen.My system gets blue screen and get restarted when it wakes up from sleep.
View 1 Replies
View Related
Jul 19, 2012
I have to load the safe mode for installing Steam after a crash. So I entered the advanced boot menu and chose Safe Mode with Networking. It started loading some .sys files. After a lot (I think it was loaded correctly) of .sys files my screen froze and after 3 seconds some weird blue dots appeared and (Left upper corner. Every dot was like 10x30 pixels) after some more seconds my screen turned black. No cursor, no login screen. How can I log in to the safe mode?
View 2 Replies
View Related