During the day, if we leave the computer alone, screen goes black, after a while, fans turn off. Wireless mouse wakes it up just fine. Fans startup before the screen is completely ready to go. During the night, the screen is dark, but the fans almost never stop. Why?
View 9 RepliesHow do you stop laptop from going into hibernation mode / sleep mode?
I run a program that takes 8 hours. I need the laptop to stay awake.
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
View 8 Replies View RelatedI have a Sony Vaio VPCSB11FX/W laptop. I lock the screen (it's password protected too) and close the lid when I need to get up to do something else while using it. Usually, the blue Windows 7 lock screen shows up when I open the laptop, but just now, I got a black screen that wouldn't respond to any buttons, so I shut the laptop down manually by holding down the power button. When I booted up and logged in, I got the old 'Windows was shut down unexpectedly' message.
Just curious, why did I get the black screen? Also, the power button was green, which means it wasn't in sleep mode at all, and the laptop's fan was whirring loudly too. This has happened to me a couple of times before, and I usually wait at least 30-60 seconds for the black screen to respond before shutting down, though the fan makes a louder noise the longer I wait. This happened even though the lid was closed properly.
Whenever I put my computer into sleep mode I press the power button once to get it out of sleep mode but when it comes up it has a blue screen with a bunch of errors on it. My computer is custom built. It is a AMD Dual Core (64-Bit) Fresh install of Windows.
View 7 Replies View RelatedYesterday i bought new grafic card geforce GT440 after my old 9800 GT stoped functioning normaly(memory failure). So here is the problem, when I start any program or do anything the computer the computer is functioning normally, but when I turn to desktop(which has black wallpaper) the monitor goes so dark that I can't see almost nothing. I tryed to find some power saving options in windows(win 7 pro, 64 bit) and on envidia control panel but i cannot find any cause for that dark screen. Even if I load a black page on my mozilla the monitor goes dark. As it cannot represent dark colors normally.
View 4 Replies View RelatedFor the past several mornings, when clicking my mouse to wake my PC from sleep mode, my screen remains completely black. I can hear the PC start up, the fan running, etc. I can even hear the Windows log on sound when I punch in my password. All power lights are on, but the monitor refuses to display anything, not even a blinking cursor.My keyboard then becomes unresponsive and I'm unable to shut my PC down using the power button. I've had to hard reboot several times by manually switching my surge protector off and on. After getting the expected message that Windows didn't shut down properly, my system then starts up as usual. I have Windows 7 Home Premium (64 bit). My processor is an AMD Athlon II X4 630 and I have 6 GB of RAM. Both my PC and monitor are brand new.
View 3 Replies View RelatedI have tried searching online for solutions but to no avail. My laptop is just under 12 months old and other than the battery dying already I have never really had any problems until last week. Its a Dell Inspiron 1564, Intel I3 running windows 7 home premium.After my computer has been woken from sleep mode any window I open in full size no longer sits flush with the top of the monitor (its about a cm below top of screen), but my desktop background is still normal and reaching the top of the monitor and I can put my cursor up there. I have updated my video and BIOS drivers from the Dell website yesterday but that doesnt seem to have done anything. If I restart my computer it goes back to normal again until the next time it sleeps but I would really rather not have to turn my computer on and off 15 times a day?
View 4 Replies View RelatedI recently put together a new computer and installed Windows 7 on it. Everything seems to work fine, except when I resume using the computer after it goes to sleep, I get a BSOD. When I wake the computer up, it shows me the log-in screen, but when I click on my user profile to log in a blue screen appears. Also, it only seems to happen when the computer enters sleep mode on its own. If I put it into sleep mode, it wakes up with no problems.
View 3 Replies View RelatedIf I close my laptop, half the time, the computer freezes after I put in my password. It just gets stuck on the welcome screen with the spinning wheel. It doesn't always happen, but I have to do a hard reset everytime it does. I already set the HD to never turn off, so I am just wondering what else i can do to stop this freezing?
View 6 Replies View RelatedI put my laptop in sleep mode before leaving to star bucks.I open my laptop and press the power buttonThe internal fans start turning as well as the disc drive, but the screen remains blank.I have heard that Windows 7 has multiple issues with the sleep mode, and I'm pretty sure laptop is now stuck in hybrid sleep? Also, I noticed that there is a hotfix for this provided by microsoft, but I would have no way to use this since my computer cannot get stuck out of this. After Researching this, I heard some people taking out the battery and holding the power button down for 30 seconds, then running it off of a/c power.
View 9 Replies View RelatedI installed windows 7 a few days ago, everything seemed to run fine until this morning. Last night i updated windows because some updates where finished, during shutdown the update was installed. This morning i turn on my computer, it beeps once(loud beep not a soft beep) The screen doesnt flicker and goes into sleep mode.
I tried disconnecting the videocard and reconnecting the wires, still doesnt work. I pressed F2, F8, F12, doesnt go to BIOS screen or Boot. I have no idea how to get the connection back. Has anyone has this problem and can help me find a solution.
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up, record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
View 6 Replies View RelatedI recentley downloaded an alarm clock program by the name of '' Alarm Master Plus '' in evaluation trile. when I shut my computer off, instead of shutting it down I ask for the computer's sleep mode or '' Mettre en veille '' option (in french). The next morning I always find myself in front of the a screen which has two buttons.One says '' Verrouiil� '' (locked), and the other one says '' change user '' . When I click on the '' Locked '' button I find myself on my desk with my alarm starting '' Always late
View 1 Replies View RelatedI'm having a problem where if my laptop is idle and the screen goes black, I can't get it to resume. I try moving the mouse and hitting buttons, but nothing happens. I have to completely shut the PC off and start it again. Also, if I put it to sleep, the same thing happens (it goes black but doesn't sleep or resume). My drivers are all up to date but it still happens.
View 8 Replies View RelatedI've been having a problem with Windows 7 recently on my new computer that I just got a couple weeks ago. The problem is that my computer will have a blue screen error when waking from sleep mode. I don't see the blue screen at all, instead, when waking from sleep mode, I see the BIOS screen and then it goes through the typical startup process as if the computer had been powered OFF instead of put into sleep mode (however, I know it was properly in sleep mode, as the power light on my tower flashes continually rather than shutting off during this mode). I get the message that Windows did not shut down properly and have the option to boot into safe mode, etc. When I boot back into normal mode I receive a message in Windows saying windows has recovered from an unexpected shut down. [code] However, when I tried to install the hotfix, I was given the message "This update does not apply to your system", which I have read may be an indicator that the update has already been installed? I have run Chkdsk on drive C successfully, and I have installed every available windows update as of today (Apr 14, 2012)
View 14 Replies View RelatedI recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up,record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
View 9 Replies View RelatedSwitched from XP to windows 7 home basicMy system :Operating system : windows 7 home basic (original)mother board :Asus P5B Mx wifi apProcessor : intel dual core , 1.6 GhzRam : 3 gb ddr2Problem : Once i put my system on sleep , on switching on, it does not display screen.My system gets blue screen and get restarted when it wakes up from sleep.
View 1 Replies View Relatedstarted recently, when I boot my PC, the screen shows message: no signal and screen stays dark.However, in the background W-7 is loading, but in order to get the video functioning, I must restart the PC, turn off the screen, wait till W-7 loads somewhat and (like after 10 sec.) turn the screen on and everything is OK.Monitor is NEW Video card too, I tried with a second one, same problem...My question is, is this W-7, main board, or something else related?
View 3 Replies View RelatedI am having this blue screen error often occurs during resume from hibernate or sleep. Have been reading bleeping computers.com and figured out where to find the error report, and pasted it below. NO hardware or software changes done, everything seems to be updated from the update advisory. Please help me find a solution, it's getting annoying to have a computer these days and slightest problem.
View 1 Replies View RelatedI've got a problem with my laptop - it won't sleep. Specifically, when I try and make it sleep, the screen turns off and I cannot interact with it at all - but the computer just keeps going. All the activity lights stay on, and while I can't see or do anything, the computer stays on and will not sleep, leaving me with no choice but to manually force shutdown. Sometimes if I leave it like this for a while, it will simply crash and shut down incorrectly. I have gone into the power-plan settings and checked my advanced settings, but that hasn't worked. It's just come on in the last few days, but I haven't installed anything new in that time. I'm going to try a system restore now, but I don't hold much hope for it.
(I'm using a Samsung R530, 32-bit Windows 7, Intel Pentium.)
Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
View 5 Replies View RelatedI keep getting a message on a bluescreen, often when the cpu comes out of sleep mode, that it is shutting down to avoid damage or something. I also often have trouble getting ctrl alt del to work. Recently, we removed several viruses, and hijackers from the computer, that made it so I couldn't even google search, and its only been doing it since then. As I write, malwarebytes said it was removing threats. I have scoured everywhere I could think of and removed almost all unnecessary programs, files and downloads. Could there stll be a virus? Could a previous virus have corrupted the comp irreversibly?
View 2 Replies View RelatedOn my monitor it seems like everything is too bright, as in places that should be pitch black are a bit too light. For example: on my iPod, even with full brightness settings everything looks normal, but on my PC's monitor it just doesn't look right.I calibrated color and setting gamma way low really helped, but my contrast is set to full, and my brightness is 75.The strange thing: when I ran Crysis 1, it fixed the monitor color! So I know the darn thing is capable, I just don't know how to.When I closed down Crysis it went back to normal.
View 2 Replies View Relatedi use my computer for 5-6 hours and lately i lose the video connection ie the screen turn black. rebooting fixes it at least for a while, but in a short time its black again. today i turn the box on and no video at all, i tried changing the vga cable to no avail.
View 1 Replies View Relatedmy laptop's screen keeps going dark after being on for only a few seconds. When the screen goes dark, I have to move my mouse around to get the screen to come back on which it usually does. After a few minutes of doing this, my screen stays on. I am running Windows 7 Ultimate 64 bit. I do have McAfee anti-virus protection. I just recently ran a virus scan which came up clear of any viruses. I also tried adjusting when the screen goes dark
View 1 Replies View RelatedI have a 10 month old Acer 5820t laptop running win 7 home premium. About 6 weeks ago, the screen started going dark every few minutes and it has gotten worse. I can see the image faintly and by pressing the display brighten button can get it to come back or sometimes have to close and reopen lid it will come back. No external peripherals are connected. The Intel HD graphics card has the latest driver installed. The screen saver seems to work but the display will also go dark when the screeb saver is running.
View 1 Replies View RelatedI have installed the latest drivers, reinstalled the program, and all that jazz and the problem still persists. Pretty much when I minimize or exit from a game I play called EVE Online, my LCD remains really dark. Kind of as if someone turned down the brightness really low on the LCD. I've figured out 2 workarounds but they aren't fixes.
I simply log out and log back in and the display brightens to its usual brilliance or I hit Ctrl+Alt+Del and it has the same effect. But once I maximize the game and minimize again the screen darkens once more. Oh and in-game everything is perfect, it's only once I go to the desktop. Any ideas? I personally think its a something wrong with the refresh rate but I ahve no clue as to how to fix that.
I have attached my DxDiag results.
If I let the computer sit unused, the screen goes black, as most monitors would; however, the screen stays dark when I move the mouse or hit buttons or something. Similarly, if I close the lid of my laptop when its turned on, and then open the lid, the screen stays black. Not only that, but when I closed the lid of the laptop, the computer never turned off. It was still running.I reset the power options to default as well, so there is nothing wrong there. Perhaps I should also mention that the screen successfully turns off and on in safe mode?
edit: Just tried a system restore to two weeks ago and the system crashed. Both times.
i havent had my laptop long but i was on it one day and it crashed on me and my screen went dark, then it started making a buzzing noise.
View 2 Replies View RelatedI have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.