Screen Shows Message: No Signal And Screen Stays Dark?

Dec 8, 2012

started recently, when I boot my PC, the screen shows message: no signal and screen stays dark.However, in the background W-7 is loading, but in order to get the video functioning, I must restart the PC, turn off the screen, wait till W-7 loads somewhat and (like after 10 sec.) turn the screen on and everything is OK.Monitor is NEW Video card too, I tried with a second one, same problem...My question is, is this W-7, main board, or something else related?

View 3 Replies


ADVERTISEMENT

Screen Stays Dark After Minimizing Or Quitting

Jun 16, 2009

I have installed the latest drivers, reinstalled the program, and all that jazz and the problem still persists. Pretty much when I minimize or exit from a game I play called EVE Online, my LCD remains really dark. Kind of as if someone turned down the brightness really low on the LCD. I've figured out 2 workarounds but they aren't fixes.

I simply log out and log back in and the display brightens to its usual brilliance or I hit Ctrl+Alt+Del and it has the same effect. But once I maximize the game and minimize again the screen darkens once more. Oh and in-game everything is perfect, it's only once I go to the desktop. Any ideas? I personally think its a something wrong with the refresh rate but I ahve no clue as to how to fix that.

I have attached my DxDiag results.

View 3 Replies View Related

Screen Stays Dark After Closing And Opening Lid Of Computer?

Dec 29, 2011

If I let the computer sit unused, the screen goes black, as most monitors would; however, the screen stays dark when I move the mouse or hit buttons or something. Similarly, if I close the lid of my laptop when its turned on, and then open the lid, the screen stays black. Not only that, but when I closed the lid of the laptop, the computer never turned off. It was still running.I reset the power options to default as well, so there is nothing wrong there. Perhaps I should also mention that the screen successfully turns off and on in safe mode?

edit: Just tried a system restore to two weeks ago and the system crashed. Both times.

View 3 Replies View Related

System Remains On While Monitor Shows No Signal Message

Sep 15, 2012

I am facing this problem, mostly while playing games and sometimes even when operating computer normally. Earlier I used to get BSOD but now it comes rarely. I tried almost everything but wont able to solve this problem:

- Formatted my computer
- Changed OS
- Reinstalled OS
- Even changed my monitor

View 4 Replies View Related

Screen Seems Like It Isn't Dark Enough (not Brightness)

May 11, 2012

On my monitor it seems like everything is too bright, as in places that should be pitch black are a bit too light. For example: on my iPod, even with full brightness settings everything looks normal, but on my PC's monitor it just doesn't look right.I calibrated color and setting gamma way low really helped, but my contrast is set to full, and my brightness is 75.The strange thing: when I ran Crysis 1, it fixed the monitor color! So I know the darn thing is capable, I just don't know how to.When I closed down Crysis it went back to normal.

View 2 Replies View Related

Screen Goes Dark After Using For Several Hours?

Jan 4, 2012

i use my computer for 5-6 hours and lately i lose the video connection ie the screen turn black. rebooting fixes it at least for a while, but in a short time its black again. today i turn the box on and no video at all, i tried changing the vga cable to no avail.

View 1 Replies View Related

Laptop Screen Goes Dark After A Few Seconds?

Nov 24, 2012

my laptop's screen keeps going dark after being on for only a few seconds. When the screen goes dark, I have to move my mouse around to get the screen to come back on which it usually does. After a few minutes of doing this, my screen stays on. I am running Windows 7 Ultimate 64 bit. I do have McAfee anti-virus protection. I just recently ran a virus scan which came up clear of any viruses. I also tried adjusting when the screen goes dark

View 1 Replies View Related

Windows 7 Laptop Screen Goes Dark?

Nov 22, 2011

I have a 10 month old Acer 5820t laptop running win 7 home premium. About 6 weeks ago, the screen started going dark every few minutes and it has gotten worse. I can see the image faintly and by pressing the display brighten button can get it to come back or sometimes have to close and reopen lid it will come back. No external peripherals are connected. The Intel HD graphics card has the latest driver installed. The screen saver seems to work but the display will also go dark when the screeb saver is running.

View 1 Replies View Related

Maximized Windows On Second Screen Shows Edges On First Screen?

Aug 2, 2012

My video card died a few days ago so i had to start using my integrated Intel HD Graphics.i have once screen at 1920X1080 and the other is 1680x1050 and when ever i maximize a window (firefox for example) it overlaps on my 1st screen. imgur: the simple image shareris a image of both screen and you can see the window layered onto the start of my screen under the start menu orb.

View 1 Replies View Related

Screen Dark In Sleep Mode But Fan Almost Never Stop

Dec 9, 2012

During the day, if we leave the computer alone, screen goes black, after a while, fans turn off. Wireless mouse wakes it up just fine. Fans startup before the screen is completely ready to go. During the night, the screen is dark, but the fans almost never stop. Why?

View 9 Replies View Related

Screen Stays Off After Lid Is Opened?

Jan 24, 2011

My laptop screen stays off when I close the lid. I set the laptop to 'do nothing'(turn off the screen), when I close the lid. When I open it, the screen stays off.The only way to fix it from here is to either turn it off or to put it in sleep mode (with my designated button). Everything still works, its just that the screen doesn't turn on.

View 2 Replies View Related

Laptop Crashed And Screen Went Dark And Made A Buzzing Noise

Nov 15, 2011

i havent had my laptop long but i was on it one day and it crashed on me and my screen went dark, then it started making a buzzing noise.

View 2 Replies View Related

Screen Stays At 'Press ESC For Options'

Jan 14, 2012

This morning, Windows installed 5 updates, which I had postponed from yesterday. It told me to reboot but when it did, it got stuck at the Press ESC point. There was no disk activity. I turned off and rebooted again several times with the Windows Repair disk in the DVD drive. I was able to run the startup test but it said it couldn't repair it. The log said the the fault was caused by a critical update. I went into System Restore, but I am unsure of the options. It showed a screen with all my partitions already ticked, including the Windows boot partition which was greyed out. Am I supposed to leave all the partitions ticked, or if I don't, will I then lose those partitions?

I currently have the Wondershare LiveBoot 2012 DVD running but I'm not sure what option I need to use. Recover MBR, Recover Boot Sector, or Recover Boot files, or all of them?

View 2 Replies View Related

Screen Stays Empty And Only My Mouse Comes Up

Aug 18, 2010

I just bought a new hard drive and windows 7. I installed the new hard drive and tried installing windows 7, but I dont get any ''pictures''. It goes up to picture 2 where I got to put in my language, but I do not actually get this screen. The screen stays empty and only my mouse comes up so I cant actually do anything

View 5 Replies View Related

Screen Stays On Standby While Boot From CD

Oct 30, 2012

I am installing windows 7 on my new build! Everything went fine and got into BIOS. Changed Boot drive to optical and inserted Windows 7 installation disc...Saved changes and reset the computer...Now the screen just stays in standby! I literally cant et into BIOS or anything...I hear the optical whirring but nothing seems to be happening...Bout 5 mins now and still nothing. Tried restarting but o go!

View 1 Replies View Related

HDMI Works Before Windows 7 Log On Screen / But "No Signal" Once Hits Log On Screen

Jun 26, 2011

I am having an issue of HDMI working during PC boot, but TV loses signal just before Windows 7 log in screen comes up (TV shows "No Signal" at this point). If I use VGA to connect PC to TV, everything works fine. [code] One thing I noticed is that Windows 7 device manager sees my TV as a "Generic PNP Monitor". I have no idea if this is connected to my issue or not. The Intel website says my drivers are up to date when I run their update utility. The Intel Graphics utility on my PC sees my TV as a monitor, not as a TV, but it does list the correct model # (M260MV).I've tried connecting both the TV with HDMI and a PC Monitor with the VGA cable and the computer would only detect the PC monitor with the VGA cable.I have read on an Intel site that others with the Core i3 CPU had similar problems so this may be a CPU/CPU driver issue, but as I said, the Intel Update Utility says my drivers are up to date.

View 3 Replies View Related

Presario 62 Showing Dark Screen On Restart After Windows Updates Installed

Jan 2, 2012

I installed windows updates and restarted my computer. It displays dark screen after restarting it.

View 1 Replies View Related

Windows 7 Stays At A Black Screen After Login

May 23, 2012

W7 will start up, load files, and then stay at a black screen with a mouse. I think that the hard drive may have gone bad, and when I did a memory diagnosis, I have found that there is bad memory with my main hard drive. I do not have the original disk, nor can I access any of the files. I tried system Recovery, but it would not list W7 as an option. If someone knows where I could find those drivers to load onto a disk, that would be great. My computer is a Dell Studio 1535.

View 3 Replies View Related

Windows 7 Hangs After Login, Stays On Welcome Screen?

Feb 3, 2013

My laptop hands at the Welcome screen...has done this before once or twice, but today it does not straighten out after restarting. I am not tech savvy...plus I am 70 years old and skittish about trying some of the suggestions I read on here

View 2 Replies View Related

Laptop Stays At Black Screen For 10+ Minutes After Logging In?

Oct 24, 2012

I have Windows 7 on my laptop and after I start it up and enter my password to login to windows I have to wait another 10-15 minutes for my desktop to appear. It's just a black screen, but the kicker is that I can move my mouse and see it on screen.

View 1 Replies View Related

Laptop Powers On But Screen Stays Black - Does Not Load Properly

Dec 1, 2012

I have a
Lenovo Laptop Thinkpad Edge E520
8GB RAM
Intel CPU B960
Pentium Processor 2.2GHZ

Recently when I have powered up my laptop it occasionally doesn't load properly, the screen stays black. You can hear the laptop working fine but you cannot see anything. This happens once or twice a week, I usually hold on the power button for 5 seconds, then reboot and it resumes my hibernate settings as usual. Could this be because I always hibernate my laptop?

View 2 Replies View Related

HP Laptop Will Turn On, But Screen Stays Blue With Moving Cursor?

Feb 1, 2011

There is a moving cursor but nothing else happens. the login page does not appear. The screen background just stays blue with white rays. I do not want to lose any files.

View 6 Replies View Related

Screen Stays Black After Waking Computer From Sleep Mode

Oct 31, 2012

Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.

View 5 Replies View Related

Screen Sometimes Appear "No Signal" Word And Become A Blank Screen?

May 29, 2012

Check connections between:- video card to motherboard- video card to cable- cable to monitorTry another monitor

View 3 Replies View Related

Acer Aspire V5431, It Won't Power Up Little Blue Light Flashing, Screen Stays Black

Dec 18, 2012

it won't power up little blue light flashing, screen stays black.

View 1 Replies View Related

Black Screen No Signal After Boot?

Oct 26, 2012

I recently built a computer for my first time. It was running fine whilst playing Arma 2, dayZ and dawn of war 2. I then installed Star Wars The Old Republic and everything went on fine until I went to play the game. The screen went black and the no signal message came up on my tv.

I could not do anything so I just turned my computer off and then back on again. When I then went to boot again in Normal mode, it just shows the windows logo and then does the same thing.

I have tried booting it in safe mode, and this works fine. I don't think it is anything to do with my monitor as it works in safe mode and also it's my tv which works with DVDs and anything on TV.

Could it possibly be something to do with the drivers? Although I have been playing other games fine until now. Or could it possibly be something such as a corrupt file or the game installed something else which won't work?

Someone also suggested that it might be something to do with the power going into the computer? They said it could be putting too mcuh power into it and it would cut out.

View 1 Replies View Related

No Signal To Monitor Until Windows Welcome Screen?

Oct 30, 2012

My problem is that if I connect the computer via DVI to a display it functions normally, but when I hook it up via HDMI to my Flat screen, it doesn't show the splash screen that gives you the option to enter bios. The screen just stays black until the windows welcome screen(win 7 64bit) comes up, then it acts totaly normal from that point. When I try to press the del key during the boot, I believe it is entering the bios, but the screen remains black so I can't see anything. I am guessing that the MB is not sending the signal to the Flat Screen until it loads windows, but can't find out anywhere that confirms that or what to do in order to resolve it.

View 1 Replies View Related

No Monitor Signal - Black Screen

Nov 27, 2009

I have a white box tower with a ASUS P5KPL-CM Motherboard I turn it on and I get a black screen, no signal to the monitor,so I plugged in my old Sony tower and the monitor works. So it's not the monitor or the cable( switched them a few times by now) I believe it is the new tower. I think it might be the VGA card but know little about these things. Manual says it is a Intel Graphics Media Accelerator (Intel GMA 3100).Or could it be something else? By the way I have Windows XP if that makes a difference.

View 9 Replies View Related

Monitor Loses Signal Before Logon Screen

Aug 10, 2009

I turn on the computer, goes past the bios screen as normal, does the windows loading screen as normal, then the screen goes black and the "No Signal" message is displayed.

Now, here is why it is different. I type in my password and press enter, without being able to see and wait for the logon sound to play, then if I unplug monitors cable, I hear the noise of windows telling me a device has been disconnected, I plug it back in again the device connection noise then plays and low and behold, there is the desktop.

I have been running Windows 7 build 7100 for roughly about three weeks until this started happening about one week ago.

MONITOR: ViewSonic VX1932wm

GPU: Sapphire HD4850 512mb

Also, I have noticed too after logging, randomly Aero will disable itself, I have to open the 'Personalize' option and run the troubleshoot to get it to fix itself again.

I assume this is the correct section, as I am experiencing visual issues. Apologies if this is not the correct section.

View 2 Replies View Related

Desktop Display Temporary No Signal Screen

Mar 22, 2011

ok so i have a desktop display(chuntex) for my win xp computer but then i upgraded it to win 7 ultimate now every time i switch users or log off it will say no signal but if i shake my mouse around for awhile it will come back on and work fine (but slow but i think thats cuase my hard drive is really full)

View 3 Replies View Related

Signal Out Of Range Error Playing Full Screen Games

Mar 31, 2012

So my issue is with all my full screen games, after a few minutes to a few hours the screen go's black and an error pops up on screen.

Signal out of range set to "1680 X 1050 @ 60hz"

Normally I would just put it to those settings, but the issue is these are basically my setting in the nevidia control panel my settings are exactly that. The only thing I could see is the advanced display settings are 59hz. But you can't set it to 60 because windows 7 rounds down instead of up now.

[code]...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved