I just bought a new hard drive and windows 7. I installed the new hard drive and tried installing windows 7, but I dont get any ''pictures''. It goes up to picture 2 where I got to put in my language, but I do not actually get this screen. The screen stays empty and only my mouse comes up so I cant actually do anything
View 5 Replies
started recently, when I boot my PC, the screen shows message: no signal and screen stays dark.However, in the background W-7 is loading, but in order to get the video functioning, I must restart the PC, turn off the screen, wait till W-7 loads somewhat and (like after 10 sec.) turn the screen on and everything is OK.Monitor is NEW Video card too, I tried with a second one, same problem...My question is, is this W-7, main board, or something else related?
View 3 Replies View RelatedMy laptop screen stays off when I close the lid. I set the laptop to 'do nothing'(turn off the screen), when I close the lid. When I open it, the screen stays off.The only way to fix it from here is to either turn it off or to put it in sleep mode (with my designated button). Everything still works, its just that the screen doesn't turn on.
View 2 Replies View RelatedThis morning, Windows installed 5 updates, which I had postponed from yesterday. It told me to reboot but when it did, it got stuck at the Press ESC point. There was no disk activity. I turned off and rebooted again several times with the Windows Repair disk in the DVD drive. I was able to run the startup test but it said it couldn't repair it. The log said the the fault was caused by a critical update. I went into System Restore, but I am unsure of the options. It showed a screen with all my partitions already ticked, including the Windows boot partition which was greyed out. Am I supposed to leave all the partitions ticked, or if I don't, will I then lose those partitions?
I currently have the Wondershare LiveBoot 2012 DVD running but I'm not sure what option I need to use. Recover MBR, Recover Boot Sector, or Recover Boot files, or all of them?
I am installing windows 7 on my new build! Everything went fine and got into BIOS. Changed Boot drive to optical and inserted Windows 7 installation disc...Saved changes and reset the computer...Now the screen just stays in standby! I literally cant et into BIOS or anything...I hear the optical whirring but nothing seems to be happening...Bout 5 mins now and still nothing. Tried restarting but o go!
View 1 Replies View RelatedW7 will start up, load files, and then stay at a black screen with a mouse. I think that the hard drive may have gone bad, and when I did a memory diagnosis, I have found that there is bad memory with my main hard drive. I do not have the original disk, nor can I access any of the files. I tried system Recovery, but it would not list W7 as an option. If someone knows where I could find those drivers to load onto a disk, that would be great. My computer is a Dell Studio 1535.
View 3 Replies View RelatedI have installed the latest drivers, reinstalled the program, and all that jazz and the problem still persists. Pretty much when I minimize or exit from a game I play called EVE Online, my LCD remains really dark. Kind of as if someone turned down the brightness really low on the LCD. I've figured out 2 workarounds but they aren't fixes.
I simply log out and log back in and the display brightens to its usual brilliance or I hit Ctrl+Alt+Del and it has the same effect. But once I maximize the game and minimize again the screen darkens once more. Oh and in-game everything is perfect, it's only once I go to the desktop. Any ideas? I personally think its a something wrong with the refresh rate but I ahve no clue as to how to fix that.
I have attached my DxDiag results.
My laptop hands at the Welcome screen...has done this before once or twice, but today it does not straighten out after restarting. I am not tech savvy...plus I am 70 years old and skittish about trying some of the suggestions I read on here
View 2 Replies View RelatedIf I let the computer sit unused, the screen goes black, as most monitors would; however, the screen stays dark when I move the mouse or hit buttons or something. Similarly, if I close the lid of my laptop when its turned on, and then open the lid, the screen stays black. Not only that, but when I closed the lid of the laptop, the computer never turned off. It was still running.I reset the power options to default as well, so there is nothing wrong there. Perhaps I should also mention that the screen successfully turns off and on in safe mode?
edit: Just tried a system restore to two weeks ago and the system crashed. Both times.
I have Windows 7 on my laptop and after I start it up and enter my password to login to windows I have to wait another 10-15 minutes for my desktop to appear. It's just a black screen, but the kicker is that I can move my mouse and see it on screen.
View 1 Replies View RelatedI have a
Lenovo Laptop Thinkpad Edge E520
8GB RAM
Intel CPU B960
Pentium Processor 2.2GHZ
Recently when I have powered up my laptop it occasionally doesn't load properly, the screen stays black. You can hear the laptop working fine but you cannot see anything. This happens once or twice a week, I usually hold on the power button for 5 seconds, then reboot and it resumes my hibernate settings as usual. Could this be because I always hibernate my laptop?
There is a moving cursor but nothing else happens. the login page does not appear. The screen background just stays blue with white rays. I do not want to lose any files.
View 6 Replies View RelatedOver the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
View 5 Replies View Relatedit won't power up little blue light flashing, screen stays black.
View 1 Replies View RelatedI know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
yesterday when i was making log out from my computer, there is no log out screen!! just black screen and mouse cursor, and when i did restart again , no logon screen appears or no any thing in screen , just black screen and mouse cursor too.I was tried every thing and no difference :safe modestartup repairrestore to some point (i dont have a point)upgrade windows or reinstall iti think the things maybe was made this poblem are :i was edited userinit.exe value from registry by deleting the comma from the end of its value. i used Windows 7 manager to make some clean and fixes some things on computer.
View 3 Replies View RelatedI am having a problem with booting BT5 (Backtrack 5) because I cant see anything upon system startup (No loading screen or anything) till the mouse is loaded. It all works fine after that, the login appears and I login like usual.
View 1 Replies View RelatedI am running Windows 7 64-bit and whenever I start up into normal mode it loads a blank desktop with only a mouse. When I try right clicking or doing ctrl-alt-delete and starting task manager nothing happens.
View 12 Replies View RelatedWhen I boot up my computer going into the starting page since there is a guest acccount aand a admin I can only see my mouse and a blackground I don't understand computers that much but
View 1 Replies View RelatedI am doing a clean install on a amd 64 bit 4500 with a ati 1gig graphics card, 250g harddrive and i think at least that is what i have. The problem that i am having is that after installing windows 7 it freezes on the initial start up window where it is asking the language to install time and currency format and keyboard.
It took a long time to get to this screen as at first it just hung on what looked like a windows 7 desktop background with no icons. It hung like this for about 10 minutes and now it is stuck on the first install screen. I cant input any information the keyboard is plugged in and I have tried it with a wireless mouse as well as a wired mouse.
As part of my upgrade to AM3, I did a quick format of my SSD and reinstalled Windows 7, but now for some reason my mouse movement doesn't match up with my cursor movement. I installed the Microsoft drivers for my keyboard and mouse, performed all the necessary Windows updates but I still can't get it to work properly. Is there something I'm not doing? Do I need to reinstall the USB drivers for my motherboard?
View 3 Replies View RelatedSo i have windows 7 64 bit pc that loads fine with one setup but then when i go set it up for another person in my office all i get is black screen with mouse and thats it.
View 1 Replies View RelatedOkay so I was just on my computer and it was being a little slower at responding than usual and then it froze so I had to hol the power button to turn it off. When I turned it back on it came to a black screen with my cursor sitting there. I can move the cursor around but cannot use ctrl+alt+del to open task manager. Safe mode leads to the same problem. Safe mode with networking also leads to the same problem. I don't have a restore point so system restore is out of the question. I tried startup repair but it said there were no problems detected. I ran a memory test to try to find problems and it came up with nothing. I looked around the Internet for solutions but only found solutions for people who could access task manager.
View 5 Replies View RelatedToday i noticed that after my windows 7 logon screen i get a black screen with only my mouse pointer on it. i already tried restoring to a day before the problem but same thing happenswhat can i do to fix it? seems to me that the problem started after i installed hotspot-shield i guess it cameout with some driver installer but i dont know which onesi waited on the black screen and it seems to start windows after 10 mins which is way longer than usual and thats my problem its anoying. what else can i do? i already did the restoring point process. and start up restore, and memory disk checkup.
View 8 Replies View RelatedI am considering XPS 17 laptop but it has touch screen. Are there any problems using mouse as a replacement. I do not hanker touch screen.
View 2 Replies View RelatedSo i came home and turned on my computer, when it didn't wanted to go further than to the Login Screen, when i got my Black Screen and i could only see my Curser. What to do? Format it?
View 8 Replies View RelatedRecently my computer has not been loading windows 7 up intill the login screen. I get to see the little circle color things swirl around with the "Loading Windows" text, but were the login screen usually appears, I get a totally black screen with a movable mouse pointer. It is a brand new rig with 4g RAM (2g sticks) and I am running the 64 bit version but wounder if this is causing the problem.
Also when I try to do a system restore using the windows disc, I must first go into the settings (by pressing DEL on start up), then set my bay drive to boot first rather then my SATA to get the "Press any button to boot from disc... " prompt. Otherwise windows will ignore the disc. However when I load the disc and try to go into restore points, there are none to choose from.... I have no clue what to do and am willing to just install windows complelty again ext.
my problem is when I start the computer and get to the login screen; Im unable to choose the user because neither my keyboard and mouse don't work. I also can't get to the safe mode. I've got USB Wireless mouse and keyboard and it works in bios. I didnt make any changes to the computer lately
View 9 Replies View RelatedMy laptop didn't reboot wen i restarted it.. so i decided to recover using the recovery disk.. But wen it reached the last cd, the recovery failed. So i decided to choose to delete all files.. after formatting, wen I reboot it appears, BOOTMGR missing. so I used windows 7 cd installer, planning to reinstall my OS.. i restarted, reboot on cd/dvd, then "windows loading" appears.. after that black screen with appears.. wmouse pointer appears.. Laptop: toshiba A665 OS: windows 7 home premium
View 5 Replies View RelatedSO i jsut got a limited edition windows 7 ultimate 64bit cd and i previously has windows 7 64bit rc installed and when i install the disc i just got it installs fine and everything but when it restarts it goes to the finishing installation and then it starts to boot up but gets stuck at blk screen with the mouse. I have had this problem before with windows 7 rc but all i had to do was just start it in safe mode then shut it down from there and start it back up it normal mode and it worked, but this i cannot do that.
I go to safe mode and it goes to applying settings screen (doesnt do this in normal mode like it should) but it says it cannot finish this in the safe mode... so yeah... I am getting pretty mad because this is the final version of the software and it shouldnt have this problem.
I wanted to upgrade from Vista to 7, but I didn't want all of my programs to save. I bought an external HDD, and put all of my games and programs which I didn't want to get lost into the HDD. Then, I reinstalled Vista, so I had no data on my PC, but only on my external HDD.
After that, I installed Windows 7. Everything went well, until I had to boot my PC. It said it was loading windows (7), and than the screen turned black, and I haven't seen nothing exept of the mouse curser.
What could the problem be and how could I fix it?
I think the internet drivers are lost too. How can I reinstall them to have my web working?
