I am having a problem with booting BT5 (Backtrack 5) because I cant see anything upon system startup (No loading screen or anything) till the mouse is loaded. It all works fine after that, the login appears and I login like usual.
View 1 Replies
my pc is booting till win logo. I have to install win 7 two times but after few hours my pc restarts and the same problem occurs..
View 5 Replies View RelatedMy computer has been going through this phase upon restart where it will BSOD around every 30 min for a couple days, then all of a sudden will be fine untill the next restart. I am running a ASUS laptop with Windows 7 Home Premium that I have had for about 2 years. I uploaded the latest .dmp file, I can upload more if necessary.
View 3 Replies View RelatedI got my hard drive replaced a few weeks ago (dropped my laptop) and had an OEM version of Windows 7 installed. After getting home and re-installing all my drivers /programs, I used it like I normally do. Fast forward 2 weeks. I wake up and press the power button but the laptop is dead (this is odd because I usually put it in hibernate on a full charge before I go to bed). This continued to happen every day, my computer s dying overnight. Since last week I have been observing it overnight. Whether it be hibernate or sleep, my computer will turn itself on and become completely unresponsive (sounds like it's on but the screen is off. My test to see if it's frozen is to hit the 'num lock' key to see if it lights up). This event is a 100% occurrence. The only way to turn it off is to hold the power button for 5 seconds. Basically if I leave my laptop in sleep or hibernate, it will turn itself on at a random interval and immediately freeze. It will stay this way until it dies or I do a hard shut down. Also, if I leave it alone and go afk while working, it will go into sleep mode and freeze completely.
View 3 Replies View Relatedyesterday when i was making log out from my computer, there is no log out screen!! just black screen and mouse cursor, and when i did restart again , no logon screen appears or no any thing in screen , just black screen and mouse cursor too.I was tried every thing and no difference :safe modestartup repairrestore to some point (i dont have a point)upgrade windows or reinstall iti think the things maybe was made this poblem are :i was edited userinit.exe value from registry by deleting the comma from the end of its value. i used Windows 7 manager to make some clean and fixes some things on computer.
View 3 Replies View RelatedI am running Windows 7 64-bit and whenever I start up into normal mode it loads a blank desktop with only a mouse. When I try right clicking or doing ctrl-alt-delete and starting task manager nothing happens.
View 12 Replies View RelatedWhen I boot up my computer going into the starting page since there is a guest acccount aand a admin I can only see my mouse and a blackground I don't understand computers that much but
View 1 Replies View RelatedI am doing a clean install on a amd 64 bit 4500 with a ati 1gig graphics card, 250g harddrive and i think at least that is what i have. The problem that i am having is that after installing windows 7 it freezes on the initial start up window where it is asking the language to install time and currency format and keyboard.
It took a long time to get to this screen as at first it just hung on what looked like a windows 7 desktop background with no icons. It hung like this for about 10 minutes and now it is stuck on the first install screen. I cant input any information the keyboard is plugged in and I have tried it with a wireless mouse as well as a wired mouse.
As part of my upgrade to AM3, I did a quick format of my SSD and reinstalled Windows 7, but now for some reason my mouse movement doesn't match up with my cursor movement. I installed the Microsoft drivers for my keyboard and mouse, performed all the necessary Windows updates but I still can't get it to work properly. Is there something I'm not doing? Do I need to reinstall the USB drivers for my motherboard?
View 3 Replies View RelatedSo i have windows 7 64 bit pc that loads fine with one setup but then when i go set it up for another person in my office all i get is black screen with mouse and thats it.
View 1 Replies View RelatedOkay so I was just on my computer and it was being a little slower at responding than usual and then it froze so I had to hol the power button to turn it off. When I turned it back on it came to a black screen with my cursor sitting there. I can move the cursor around but cannot use ctrl+alt+del to open task manager. Safe mode leads to the same problem. Safe mode with networking also leads to the same problem. I don't have a restore point so system restore is out of the question. I tried startup repair but it said there were no problems detected. I ran a memory test to try to find problems and it came up with nothing. I looked around the Internet for solutions but only found solutions for people who could access task manager.
View 5 Replies View RelatedToday i noticed that after my windows 7 logon screen i get a black screen with only my mouse pointer on it. i already tried restoring to a day before the problem but same thing happenswhat can i do to fix it? seems to me that the problem started after i installed hotspot-shield i guess it cameout with some driver installer but i dont know which onesi waited on the black screen and it seems to start windows after 10 mins which is way longer than usual and thats my problem its anoying. what else can i do? i already did the restoring point process. and start up restore, and memory disk checkup.
View 8 Replies View RelatedI am considering XPS 17 laptop but it has touch screen. Are there any problems using mouse as a replacement. I do not hanker touch screen.
View 2 Replies View RelatedSo i came home and turned on my computer, when it didn't wanted to go further than to the Login Screen, when i got my Black Screen and i could only see my Curser. What to do? Format it?
View 8 Replies View RelatedRecently my computer has not been loading windows 7 up intill the login screen. I get to see the little circle color things swirl around with the "Loading Windows" text, but were the login screen usually appears, I get a totally black screen with a movable mouse pointer. It is a brand new rig with 4g RAM (2g sticks) and I am running the 64 bit version but wounder if this is causing the problem.
Also when I try to do a system restore using the windows disc, I must first go into the settings (by pressing DEL on start up), then set my bay drive to boot first rather then my SATA to get the "Press any button to boot from disc... " prompt. Otherwise windows will ignore the disc. However when I load the disc and try to go into restore points, there are none to choose from.... I have no clue what to do and am willing to just install windows complelty again ext.
my problem is when I start the computer and get to the login screen; Im unable to choose the user because neither my keyboard and mouse don't work. I also can't get to the safe mode. I've got USB Wireless mouse and keyboard and it works in bios. I didnt make any changes to the computer lately
View 9 Replies View RelatedI just bought a new hard drive and windows 7. I installed the new hard drive and tried installing windows 7, but I dont get any ''pictures''. It goes up to picture 2 where I got to put in my language, but I do not actually get this screen. The screen stays empty and only my mouse comes up so I cant actually do anything
View 5 Replies View RelatedMy laptop didn't reboot wen i restarted it.. so i decided to recover using the recovery disk.. But wen it reached the last cd, the recovery failed. So i decided to choose to delete all files.. after formatting, wen I reboot it appears, BOOTMGR missing. so I used windows 7 cd installer, planning to reinstall my OS.. i restarted, reboot on cd/dvd, then "windows loading" appears.. after that black screen with appears.. wmouse pointer appears.. Laptop: toshiba A665 OS: windows 7 home premium
View 5 Replies View RelatedSO i jsut got a limited edition windows 7 ultimate 64bit cd and i previously has windows 7 64bit rc installed and when i install the disc i just got it installs fine and everything but when it restarts it goes to the finishing installation and then it starts to boot up but gets stuck at blk screen with the mouse. I have had this problem before with windows 7 rc but all i had to do was just start it in safe mode then shut it down from there and start it back up it normal mode and it worked, but this i cannot do that.
I go to safe mode and it goes to applying settings screen (doesnt do this in normal mode like it should) but it says it cannot finish this in the safe mode... so yeah... I am getting pretty mad because this is the final version of the software and it shouldnt have this problem.
I wanted to upgrade from Vista to 7, but I didn't want all of my programs to save. I bought an external HDD, and put all of my games and programs which I didn't want to get lost into the HDD. Then, I reinstalled Vista, so I had no data on my PC, but only on my external HDD.
After that, I installed Windows 7. Everything went well, until I had to boot my PC. It said it was loading windows (7), and than the screen turned black, and I haven't seen nothing exept of the mouse curser.
What could the problem be and how could I fix it?
I think the internet drivers are lost too. How can I reinstall them to have my web working?
Any one experienced a problem with Acronis 2010.
Didn't had time to look in to it, hope you guys can save me some time.
I used the Acronis 2010 System Cleanup for the first time. My windows 7 stopped responding, and I had to do hard reset.
After reset windows boots as far as black screen with mouse cursor.
I can move the mouse and Caps Lock respond, but that about it.
Same in safe mode.
Had no luck with Sys Restore, Boot recovery, Chkdsk didn't find any problems.
Ram Fine, swapped dims, memtest pass.
Didn't had time to do more.
System Info:-
Windows 7 x64 Enterprise.
UD5, I7 920, 12GB RAM, 260gtx
x2 750 in Raid 0
x4 1TB blacks in Raid 5
I have 4 days old system image, but I like to know what went wrong.
[code] This info above is not for the PC in trouble.I have an ACER laptop and it all of a sudden went to a blue screen and then tried to reboot to a black screen with mouse pointer only. Tried my win 7 upgrade CD to see if I could repair and it only loads to the same end. No options are asked for.The blue screen has appeared a couple of times and states a unusable boot sector. I would like to run a checkdisk but cannot find one to put on a memory stick with a minimal operating system.I have tried all the reboot choices, F8, F2 and F12.I tried to use an old windows XP install CD and when I select install it says a HDD can not be found.
View 3 Replies View RelatedOccasionally when I boot up my PC (Windows 7 Pro SP1), the screen is dulled but the mouse pointer (arrow) is very bright. When it's like this, if I open an application the text and the caret pointer are very dull and difficult to read. The situation doesn't change if I try a different monitor. So far, the only way I've found to get back to normal is to re-boot.
View 3 Replies View RelatedA few nights ago I came home to my Win 7 64 bit desktop frozen in a busy state. Windows was running, but the cursor was indicating busy and the computer was locked up. After 10 minutes of waiting for it to respond (hitting Ctrl+Alt+Del or Ctrl+Shift+Del had no response), I did a hard reboot (held down power button until the computer restarted). When the computer booted back up - I saw a "Resuming Windows" screen rather than "Starting Windows." Windows did load, and while everything appeared to run fine (Start menu would open and cursor was okay), no programs would open after clicking on them, and task manager would not appear. Fed up, I did another hard reboot. This time, Windows did not boot. The Windows 7 logo appears, gets very dim, and after a while a 0xed (Unmountable boot volume) BSOD appears and the computer restarts.
The fun really begins when trying to launch Windows Setup, any of the three safe modes, or last known good configuration. In the safe mode scenarios, safe mode never loads (gets hung up while loading drivers). For last known good configuration, I get the same BSOD. The really interesting part is Windows Setup. Windows setup loads (you see the loading bar), and then goes to a black screen. After a while (15-60 minutes), a cursor appears on the screen. You can move the cursor around - but that's it. Ctrl+Alt+Del has no effect. I've left the computer on for 24+ hours at this point - nothing else happens. I have a separate Windows 7 64 bit repair CD as well as a Windows 7 64 bit ERD CD. When forcing the computer to boot off the CDs, the same exact scenario occurs. Windows Setup loads...then black screen. Booted off an Ubuntu live CD - the harddrives (I have three) are all fine. Data is okay, SMART tests all pass. If I could just get to a place where I could run something like chkdsk or some fixboot commands - I'd probably be okay. But anytime I try to boot/run some Windows based software - everything goes to crap.
My next step (which I will probably work on tonight/tomorrow) is to remove the harddrive that has Windows installed on it (a ~70 GB hdd), hook it up to another computer through a USB cable system that will make it look like an external harddrive, and hopefully run chkdsk on it that way. I'm posting here to see if anyone has any suggestions or ideas though. It blows my mind that whatever is wrong with my Windows installation is somehow blocking a windows repair disc from loading.
Basically, my pointer keeps pushing to a certain point on my screen. It is not pushing in a direction but to a certain point on my screen. It does not do this during safe mode. It also does it during certain times during gaming, where I discovered the problem. For example, it didn't do this when I was placing a turret gun, during the game, but, did so when I tried to make the turret face a certain way and I could only make it face one way. I am doing to do virus scans. It is probably a virus because earlier that day when I tried to download something I accidentally used a download link inside a pop.
View 4 Replies View RelatedThis isn't a problem per se, but I'm curious to know if it's possible to change the login screen mouse cursor. It's just the boring plain white arrow. There's probably a registry setting for it but I don't know where. A google search turned up nothing useful. It seems it's not something that interests many others. I'm running W7 Home Premium.
View 3 Replies View RelatedA menu item from a context menu frequently remains displayed after a mouse click. For instance I have a display that has the word 'Delete' on it. This display is on top of anything I type or try to read. That is why I had to put a carriage return after display above as I was unable to move anything so that the I could see what I was doing. The only way I have found to get rids of it is to reboot. Doesn't matter what program I am in. It happens when I click on a context menu item.
View 5 Replies View RelatedIs there a way to start a screen saver with a hot-key or a mouse gesture (or perhaps by putting the mouse into a certain corner for a certain amount of seconds)?
I would like the ability to start the screen saver on command without going to the display option and clicking the preview button. For example, when surfing the web or watching a video, I would like to push alt-s or something similar, or perhaps move the mouse to a corner, and the screen saver starts automatically, right away, then acts normally as if it started by itself (meaning, it is "on" until I move the mouse or push a key).
I have a problem when booting up Windows 7.
When I boot, I see the 4 particles, but after that, i get a black screen with my mouse cursor, but that's all.
If i wait for about 7 minutes, i get the login screen and everything works fine.
I haven't installed anything or done anything that could cause this.
Is this normal? I hope not because i hate waiting :P
I have read some other topics that seemed to be almost the same problem as mine. Some say you have to get a new videodriver. have done that, didn't
work. Restoring to a restore point didn't work either.
Any suggestions?
EDIT: Forgot to say, it is a dual boot (win xp/win 7) (maybe usefull information)
It All started when my ipod was being stupid and got Bricked almost. So I went into Windows XP but switched to IDE storage Config. in the Bios Fixed it Rebooted Changed to AHCI which is what Windows 7 was Installed with So. Now When I go to Windows 7 NO Matter what Mode (Safe Mode) Keyboard and Mouse there Off they don't stay on after boot. I tried a PS2 Converter, Switched USB Ports, Put in a new Keyboard and Nothing. I re-copied the USB drivers from the DVD into System32/Drivers Still will not work..
Keyboard: Dell Multimedia USB with 2 USB Ports and Logitech V200 Wireless Mouse.
Windows 7 Ultimate 64-Bit.
Asus P6T
Core i7 930 2.8GHz LGA1366
OCZ Gold Series 2x2GB = 4GB DDR3-1333
Also I did Memory Test nothing was wrong. I have had this problem with XP before because it couldn't handle the System Hardware Change But I was able to easily repair it and It worked after. How Do I fix it with Windows 7?
HP G60 laptop, after the unit has been on for 10min or more it has a random issue with the display going blank. If you move the mouse the display comes back as long as the mouse is moving. Stop moving the mouse the display goes blank. Sometimes if you let it sit awile it will start working again. It is now so bad the computer is not useable. It has McAfee protection and I run system fix it utilities 11.
View 2 Replies View Related
