My laptop screen stays off when I close the lid. I set the laptop to 'do nothing'(turn off the screen), when I close the lid. When I open it, the screen stays off.The only way to fix it from here is to either turn it off or to put it in sleep mode (with my designated button). Everything still works, its just that the screen doesn't turn on.
View 2 Repliesstarted recently, when I boot my PC, the screen shows message: no signal and screen stays dark.However, in the background W-7 is loading, but in order to get the video functioning, I must restart the PC, turn off the screen, wait till W-7 loads somewhat and (like after 10 sec.) turn the screen on and everything is OK.Monitor is NEW Video card too, I tried with a second one, same problem...My question is, is this W-7, main board, or something else related?
View 3 Replies View RelatedThis morning, Windows installed 5 updates, which I had postponed from yesterday. It told me to reboot but when it did, it got stuck at the Press ESC point. There was no disk activity. I turned off and rebooted again several times with the Windows Repair disk in the DVD drive. I was able to run the startup test but it said it couldn't repair it. The log said the the fault was caused by a critical update. I went into System Restore, but I am unsure of the options. It showed a screen with all my partitions already ticked, including the Windows boot partition which was greyed out. Am I supposed to leave all the partitions ticked, or if I don't, will I then lose those partitions?
I currently have the Wondershare LiveBoot 2012 DVD running but I'm not sure what option I need to use. Recover MBR, Recover Boot Sector, or Recover Boot files, or all of them?
I just bought a new hard drive and windows 7. I installed the new hard drive and tried installing windows 7, but I dont get any ''pictures''. It goes up to picture 2 where I got to put in my language, but I do not actually get this screen. The screen stays empty and only my mouse comes up so I cant actually do anything
View 5 Replies View RelatedI am installing windows 7 on my new build! Everything went fine and got into BIOS. Changed Boot drive to optical and inserted Windows 7 installation disc...Saved changes and reset the computer...Now the screen just stays in standby! I literally cant et into BIOS or anything...I hear the optical whirring but nothing seems to be happening...Bout 5 mins now and still nothing. Tried restarting but o go!
View 1 Replies View RelatedW7 will start up, load files, and then stay at a black screen with a mouse. I think that the hard drive may have gone bad, and when I did a memory diagnosis, I have found that there is bad memory with my main hard drive. I do not have the original disk, nor can I access any of the files. I tried system Recovery, but it would not list W7 as an option. If someone knows where I could find those drivers to load onto a disk, that would be great. My computer is a Dell Studio 1535.
View 3 Replies View RelatedI have installed the latest drivers, reinstalled the program, and all that jazz and the problem still persists. Pretty much when I minimize or exit from a game I play called EVE Online, my LCD remains really dark. Kind of as if someone turned down the brightness really low on the LCD. I've figured out 2 workarounds but they aren't fixes.
I simply log out and log back in and the display brightens to its usual brilliance or I hit Ctrl+Alt+Del and it has the same effect. But once I maximize the game and minimize again the screen darkens once more. Oh and in-game everything is perfect, it's only once I go to the desktop. Any ideas? I personally think its a something wrong with the refresh rate but I ahve no clue as to how to fix that.
I have attached my DxDiag results.
My laptop hands at the Welcome screen...has done this before once or twice, but today it does not straighten out after restarting. I am not tech savvy...plus I am 70 years old and skittish about trying some of the suggestions I read on here
View 2 Replies View RelatedIf I let the computer sit unused, the screen goes black, as most monitors would; however, the screen stays dark when I move the mouse or hit buttons or something. Similarly, if I close the lid of my laptop when its turned on, and then open the lid, the screen stays black. Not only that, but when I closed the lid of the laptop, the computer never turned off. It was still running.I reset the power options to default as well, so there is nothing wrong there. Perhaps I should also mention that the screen successfully turns off and on in safe mode?
edit: Just tried a system restore to two weeks ago and the system crashed. Both times.
I have Windows 7 on my laptop and after I start it up and enter my password to login to windows I have to wait another 10-15 minutes for my desktop to appear. It's just a black screen, but the kicker is that I can move my mouse and see it on screen.
View 1 Replies View RelatedI have a
Lenovo Laptop Thinkpad Edge E520
8GB RAM
Intel CPU B960
Pentium Processor 2.2GHZ
Recently when I have powered up my laptop it occasionally doesn't load properly, the screen stays black. You can hear the laptop working fine but you cannot see anything. This happens once or twice a week, I usually hold on the power button for 5 seconds, then reboot and it resumes my hibernate settings as usual. Could this be because I always hibernate my laptop?
There is a moving cursor but nothing else happens. the login page does not appear. The screen background just stays blue with white rays. I do not want to lose any files.
View 6 Replies View RelatedOver the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
View 5 Replies View RelatedI would like to lockin (whatever) it takes to have all windows full screen when they are opened. Please make it simple as I don't know much about computers. I also have this problem with my PC using Vista.
View 9 Replies View Relatedit won't power up little blue light flashing, screen stays black.
View 1 Replies View RelatedWhen i log on to my computer it goes up to the log-in screen and then when i opened my account it shows a black screen ! i cant do anything - i can enter safe mode- in safe mode, the audio service is not running- when i use system restore and repair my computer, it could not detect any problem
View 1 Replies View RelatedI know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
When I turn on the screen of my PC I get weird shapes all over the screen. Some of them are coloured, some are grey but they appear on all programmes, including a Word blank page and the desktop page. Some of them flash, some of them change shape, ut they are all pixel shaped within the boxes. There are also some strange 'squiggly' marks on the screen. When I opened Windows mail, the left hand side of the screen was completely black and it didn't show any of my messages. As I'm typing this message, I've got grey boxes which change shape as I type and it's covering some of the text.
View 13 Replies View Relatedcap light stays on will not toggle
View 2 Replies View RelatedWhen I shut down Windows 7 x64 Pro, windows shut downs normally, power to screen turns off, but power to PC stays on, fans run. I have to force complete shut down by holding in the power button.
This issue is sporatic. Sometimes the PC shuts down completely, other times it does as described above. This issue started ocurring AFTER I installed a Crucail M4 SSD with a clean Windows 7 install. No other hardware changes.
Research lead me to changing the IEEE Power Managment to "Allow the computer to turn off this device to save power." This solution did not work for me.
My System: Dell XPS 435 MT, ATI Radeon 4850 Graphics Card.
i have an hp pavilion dv5 1006ax laptop with vista as default os. i changed to windoes 7 and now i have a problem with the bluetooth. it does not turn red and stays blue for ever. i cannot turn the adapter off. there is no problem in sending and receiving files. but when vist is installed it works fine...
View 2 Replies View Relatedi don't say my specs cos i have them on my signature.. so my problem is like many others with this MB it wont boot suddenly ... i have tired every single thing you can imagine ... re-seat CPU put ram on dim1 , clear cmos with 3 different w
View 2 Replies View RelatedI have a TP-LINK adaptor 150mbps (TL-WN722N). I have used it over 1 year now and the speed never changes, it always 65 mbps. Although sometimes its very slow even with the 65mbps.
View 4 Replies View Relatedit's already about a year know since I've assembled my computer. My motherboard seems not to completely shutdown the power of the usb ports. The motherboard I use is a Asus P6T se, I've been searching trough the forum but nothing came out.. maybe I oversaw it but I'm not sure 'bout that.
So when I shutdown all usbdevice basically stay on or are still getting power.. I want it to turn off too. First reactions will give me go check the BIOS. I browsed it several times already.
Dell Studio XPS 8100 i5 64-bit Windows 7 Yes I'm logged in as administrator.First problem: When I tried to delete a file, the icon stays where it was. When I try for the second time to delete same fileI get "This is no longer located in C:\users\john\desktop. Verify the items location and try again." Second problem: When I make a new folder on my desktop, name it and push enter,the name reverts to "new folder".
View 3 Replies View RelatedI am going to preface this by saying that this has *nothing* to do with restoring from sleep or hibernate modes. In searching for an answer to this issue, I found way too much related to that.
My problem is simple. Occasionally (~50% of the time) when I turn the monitor back on after shutting it off, it will stay blank and not really turn back on. It makes no difference how long the monitor has been off. After turning it back on, the power light is green, indicating there is a signal, but the screen is black.
Again, the computer has not slept or hibernated. I simply shut off the monitor and later come back to turn it on. The same thing will happen occasionally if Windows shuts the monitor off after the configured time. (I did that last part as a test; I typically do not automatically shut it off.)
Specs:
OS: Windows 7 64-bit
CPU: Intel Core i7 860
MB: Asus P7P55D
Memory: 8GB - Corsair CMX6GX3M2A1600C9 (2 x 2 x 2GB)
Graphics: NVIDIA GeForce 8800 GTS 640MB
Monitor: Chimei CMV 221D
NVIDIA Drivers: 8.17.11.9562 (11/20/2009)
I originally thought it was the OS that was hung. However, I was able to go into the start menu and restart ("Start" -> "Right" -> "Right" -> "R"), so I know the OS was there responding to my commands.
Attempts to fix:
- Restart the computer. This worked.
- Shut off the power to the monitor and turn it back on. This works most of the time.
- Lock and unlock Windows. This works after a few tries.
- Hit CTRL-ALT-DEL followed by ESC. This works after a few tries.
So, I have a fairly simple work around now. So this is only a minor annoyance. Hitting CTRL-ALT-DEL then ESC does seem to work. I don't think it is a placebo because I waited 5 minutes and it did not come back, but after 2 cycles of that, it came back. I think that fixes it because it causes full screen refreshes.
Does anyone have any ideas or has anyone seen this before? The drivers are recent, but I noticed this with the clean-install Windows 7 drivers for this card as well. This is a very clean and very recent install (3 days). I never had this problem with Vista 32-bit, the same graphics card, recent drivers, but different CPU/motherboard/memory.
I have 16gb of memory and it's a second generation i7 2600K computer. I ran dskchk /r and disabled windows search. I have a anti-virus/malware. I've cleaned the reg. The doughnut looking cursor just spins for at least 30 seconds on every thing I do.
View 1 Replies View RelatedJust made a new pc running w7hp from a wd green drive.Psu is a corsair cx430 cpu the a10 5800k and the motherboard is the asrock a75pro4-m.All parts are brand new.For some reason the pc just turns itself off, even when in use. The pled stays on but the power nor reset button work.To turn it back on, one needs to turn the psu off and on first.
View 5 Replies View RelatedI shut down windows 7, and it seems to, but the computer fans / lights / drives /Ram all still have power. I tried searching my power options and making sure everything was set properly, etc. I even re-flashed my bios. I didn't make any major changes like add new hardware / software, only some windows updates that I've now rolled-back. It looks like one or two people just had to adjust a power setting, but that does not seem to be my issue. I don't want to re-install windows.
Windows 7 64 Pro
Asus M4A79XTD EVO
AMD Althlon II x 3 435
4.0 Gigs Crucial Ram (1600)
WD Caviar .5 tb drive
LG Combo drive
Mouse / Keyboard through a starview KVM switch (swap from work and home pc's)
For some reason, when I archive my personal folder, the size of the outlook.pst is not decreasing? I'm following the same steps, e.g. I close outlook after archiving, then re-open and compact the personal folder. From WITHIN Outlook, the personal folder size shows that it's been reduced significantly. But from my file manager view, the file size continues to grow, and is now approaching 2G. While I know this Outlook 2003 2G max limitation was "fixed" in Outlook 2007, I still don't understand why the size on disk doesn't reflect the fact that I've archived?
I'm running Outook 2007 under Windows 7 (64 bit)
I'm assuming this may be a problem because Outlook occasionally hoses up for no apparent reason?
I checked my page file size versus my RAM and since they were both ~ 6G, I followed the advice received elsewhere in this forum to increase the page file size. I have now set it at 9G to 12G.
I am little bit worried about my harddrive. Previously I had 80 gb harddrive and then I upgraded it to 320 gb. I have dell latitude d630 laptop with two operating system. Windows 7 and XP. When I use Windows 7 then my computer specially hard drive light stays on and mouse is busy and I have to restart my laptop however in my XP this problem is never seen. I also installed vista and deep formatted the hard drive but the problem still persists in windows 7. The system is normal but when I surf internet via mozilla or chrome. This problem arises. I have done everytrouble shooting I can chkdsk and everything but when I use chkdsk in my western digital harddrive, it says error. I am thinking its harddrive issue what do u say?
View 3 Replies View Related