Presario 62 Showing Dark Screen On Restart After Windows Updates Installed
Jan 2, 2012I installed windows updates and restarted my computer. It displays dark screen after restarting it.
View 1 RepliesI installed windows updates and restarted my computer. It displays dark screen after restarting it.
View 1 RepliesMy computer recently told me to install some updates, I usually don't bother and just leave it but this time I installed them. However, after the updates had installed, I went back to my laptop to see that the screen resolution is 'stretched'. I have done the following
- Set it to the highest resolution
- Made icons small instead of medium
The highest resolution it will allow is 1204 x 768 but this is not what it used to be. I have no idea what the old setting was but I do know this look isn't right. I also started my computer in safe mode, and it had a higher resolution when I edited the settings that was the right one but when I restarted my laptop, it went back to the smaller size. Web pages don't look right and there is always a horizontal scroll bar (no my page isn't zoomed in, the toolbars, tabs everything is different).
Yesterday i bought new grafic card geforce GT440 after my old 9800 GT stoped functioning normaly(memory failure). So here is the problem, when I start any program or do anything the computer the computer is functioning normally, but when I turn to desktop(which has black wallpaper) the monitor goes so dark that I can't see almost nothing. I tryed to find some power saving options in windows(win 7 pro, 64 bit) and on envidia control panel but i cannot find any cause for that dark screen. Even if I load a black page on my mozilla the monitor goes dark. As it cannot represent dark colors normally.
View 4 Replies View RelatedI have a 10 month old Acer 5820t laptop running win 7 home premium. About 6 weeks ago, the screen started going dark every few minutes and it has gotten worse. I can see the image faintly and by pressing the display brighten button can get it to come back or sometimes have to close and reopen lid it will come back. No external peripherals are connected. The Intel HD graphics card has the latest driver installed. The screen saver seems to work but the display will also go dark when the screeb saver is running.
View 1 Replies View Relatedstarted recently, when I boot my PC, the screen shows message: no signal and screen stays dark.However, in the background W-7 is loading, but in order to get the video functioning, I must restart the PC, turn off the screen, wait till W-7 loads somewhat and (like after 10 sec.) turn the screen on and everything is OK.Monitor is NEW Video card too, I tried with a second one, same problem...My question is, is this W-7, main board, or something else related?
View 3 Replies View Relatedso i came home from work and my pc was showing on the screen "BOOTMGR is missing" to restart pres ctrl+alt+delete. i have no idea what to do. i have beenrunning an ocz agility 3 60gb ssd as my boot drive for about 3 weeks and it has been working flawlessly. nothing in the system has changed.
View 3 Replies View RelatedOn my monitor it seems like everything is too bright, as in places that should be pitch black are a bit too light. For example: on my iPod, even with full brightness settings everything looks normal, but on my PC's monitor it just doesn't look right.I calibrated color and setting gamma way low really helped, but my contrast is set to full, and my brightness is 75.The strange thing: when I ran Crysis 1, it fixed the monitor color! So I know the darn thing is capable, I just don't know how to.When I closed down Crysis it went back to normal.
View 2 Replies View Relatedi use my computer for 5-6 hours and lately i lose the video connection ie the screen turn black. rebooting fixes it at least for a while, but in a short time its black again. today i turn the box on and no video at all, i tried changing the vga cable to no avail.
View 1 Replies View Relatedmy laptop's screen keeps going dark after being on for only a few seconds. When the screen goes dark, I have to move my mouse around to get the screen to come back on which it usually does. After a few minutes of doing this, my screen stays on. I am running Windows 7 Ultimate 64 bit. I do have McAfee anti-virus protection. I just recently ran a virus scan which came up clear of any viruses. I also tried adjusting when the screen goes dark
View 1 Replies View RelatedI have installed the latest drivers, reinstalled the program, and all that jazz and the problem still persists. Pretty much when I minimize or exit from a game I play called EVE Online, my LCD remains really dark. Kind of as if someone turned down the brightness really low on the LCD. I've figured out 2 workarounds but they aren't fixes.
I simply log out and log back in and the display brightens to its usual brilliance or I hit Ctrl+Alt+Del and it has the same effect. But once I maximize the game and minimize again the screen darkens once more. Oh and in-game everything is perfect, it's only once I go to the desktop. Any ideas? I personally think its a something wrong with the refresh rate but I ahve no clue as to how to fix that.
I have attached my DxDiag results.
During the day, if we leave the computer alone, screen goes black, after a while, fans turn off. Wireless mouse wakes it up just fine. Fans startup before the screen is completely ready to go. During the night, the screen is dark, but the fans almost never stop. Why?
View 9 Replies View RelatedIf I let the computer sit unused, the screen goes black, as most monitors would; however, the screen stays dark when I move the mouse or hit buttons or something. Similarly, if I close the lid of my laptop when its turned on, and then open the lid, the screen stays black. Not only that, but when I closed the lid of the laptop, the computer never turned off. It was still running.I reset the power options to default as well, so there is nothing wrong there. Perhaps I should also mention that the screen successfully turns off and on in safe mode?
edit: Just tried a system restore to two weeks ago and the system crashed. Both times.
I got the box telling me that "Windows needs to install updates and restart etc.". [code]
View 1 Replies View RelatedIn December I did std updates as received but then window does not start. It just stays forever at the Windows 7 welcome splash.
I have read about this problem on here before but it was a long time back and this is new.
I know it is because of the updates - Sys restore only works to an extent - fortunately I have a system image to restore it but I have to keep updates switched off which is not good.
i havent had my laptop long but i was on it one day and it crashed on me and my screen went dark, then it started making a buzzing noise.
View 2 Replies View RelatedI have a windows 7 vista 64bit (or 62, not sure) and for a while now I have been have the same problem... first of all, windows updates keep on failing! practically all of them. After the update, it requires me to restart the computer because some of the updates can not be completed while the system is running. As it reboots, it goes to screen where the resolution is really zoomed in, and it says the computer did not start up properly (start up repair).
This happens every time it makes me restart or when I shut it down. (So I just leave it on sleep, but that never works cuz there's an automated windows update restart timer). Also heard that I needed an anti virus program so I got one. VIPRE - The first attempt. Windows update. Restarts. Start up repair. Then VIPRE is completely gone from my computer. (Not just vipre but some other programs as well). Microsoft security essentials, the second attempt. Same thing happens. its completely gone. As if I never had it.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3758 Mb
Graphics Card: Intel(R) Graphics Media Accelerator HD, 1751 Mb
Hard Drives: C: Total - 294742 MB, Free - 133700 MB;
Motherboard: Sony Corporation, VAIO, N/A, C6052Q8U
Antivirus: AVG Internet Security 2011, Updated and Enabled
Ive just formatted my hd and reinstalled windows 7 ultimate 32bit onto it. This went on fine with no problems. however, when i went on the net i initially found that i couldnt download the adobe flash player as it comes up with "actionlist not found". Also when viewing websites it keeps saying "certificate error" meaning im having to click "show blocked content" on every site i visit! The smart screen filter says its temporarily unavailiable but has been for several days now and not chamnged. And finally, i went into the updates section, tried to search for new updates as i thought this may be the problem, and it come up with "Errors found Code 80072F8F"
View 3 Replies View RelatedI'm having an issue with updating my system. My computer installed some updates and wanted me to restart to fully update the system. When I turn the computer on now it shows it's updating (it never progresses past zero) and it doesn't finish the update. Now every single time I go to start my computer it constantly has to try and finish these updates. The computer will sit there for a good few minutes trying. I have no idea what the updates were.
View 2 Replies View RelatedWhen I restart my computer I get the notification that "Windows Has Installed New Updates. Your Computer was Restarted to Finish Installing Updates". AFAICT the only updates installed in the last two plus weeks have been MSE definition updates. The last real updates were installed on 11 April. Even though I do not restart my computer often I am sure this only started recently. It has done it for four restarts in the last 24 hours.
View 2 Replies View Relatedi have 14 updates that have downloaded but did not install. i have tried looking for a way to manually download them but i am having no luck. what do i do?
these are the updates:
kb2722913 error code 80200011
kb2705219
kb2712808
kb2731847
kb2729094
[code]....
i have installed window 7 ultimate 32 bit on my 32 bit PC. But it freezes when i restart it.
View 2 Replies View RelatedList of installed updates is blank. How do I get the list to show the updates I have installed?
View 2 Replies View RelatedMy computer was built by CyperPowerPC a year ago. Have had zero problems with it until some updates were automatically put in a month or so ago. After the install, my pc still was showing that I was connnected to the internet, except my browser (firefox) would not load any pages.
I restored the system back to a previous point to fix this. But have since restarted my machine and the problem came back (didn't realize the updates got installed automatically on reboot). My question is what do I do as a permanant fix in lieu of system restore? I think the updates causing the problem are related to security reasons. I ran anti malware and it found and deleted 2 things but still no help.
I think there were 20 or so updates that got installed, how do I know which is the problem? (if it is the updates at all). I can get more info tonight (ie specific update names) if needed.
Every time I try and shut down my computer an explanation mark (!) appears, signifying that Windows need updating. However, once I start the updating process, the process completes after a few minutes with the following message "Some updates were not installed".
View 3 Replies View RelatedInstalled a new hard drive and did a clean install of windows 7 on it. Installed the the drivers from the recovery cd and I get the message " windows update cannot currently check for updates because the service is not running".
View 2 Replies View RelatedI restarted my computer and when i am logging on and the message "preparing your desktop.." shows up, it loads a little while but then it is only a blue background and down in the right corner this shows,"Windows 7 Evaluation copy. Build 7100 This copy of Windows is not genuine"
View 9 Replies View RelatedHere is what are my system spec
Asus Sabertooth p67 Mobo
Intel i7-2600k
Patriot G2 - 2x4gb 1600mhz ddr3 ram
Antec case
Kingston 64gb V+ SSD SNVP325-S2/64GB( to boot OS)
Samsung 1TB 7200RPM HDD (basically i want this as secondary to install files/programs etc)
First thing i did was install my OS on my SSD and then connected my HDD. I checked and saw that, in BIOS, my SATA was in ACHI.In boot up screen, it first shows "NO hard drive detected" and later it says that my HDD and SSD are recognized. Once fully in windows default screen. When i go to my computer i only see my SSD and not HDD.
A friend (yeah, right) has a new laptop & tech support said that rebooting/power cycle (turn machine "off", wait & power on) after updating "activates" the updates; while restarting only installs updates.
View 10 Replies View RelatedI am reinstalling Windows rather often, but would like to do this without creating a slipstream DVD. Windows update has this tendency to wait a couple of hours before telling you that it has found an update. Is there a way to launch the updater agent on startup and then restart the computer thus installing the updates and running the agent again? I must say that installing updates is a pain where the sun doesn't shine since you need to watch it in order to reboot and launch the updater 6-7 times on a fresh install.
View 6 Replies View RelatedI installed windows 7 ultimate 64 bits, I do all updates including sp1, and it appears one last update that is IE 9 but on optional. It seems that it install, when I restart pc windows is installing ok, but when it restarts it started installing and reverting changes with error. I already downloded the file and its is the same. I do reset updates and is the same.
View 4 Replies View Related