I had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time I wake up my computer, the ipv6 cannot work. The appearance is that I can't ping and access ipv6 website. But after some research, I realize that only the DNS part is broken. When I ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if I use nslookup, I can find the ipv6 address. And the following are my tries:
ping ipv6.google.com -- not work
ping 2a00:1450:8001::68 -- does work, the ip is the ipv6.google.com address
ping -6 ipv6.google.com -- does work like the above
I've bough a Dell Inspiron 1564 with Windows 7 home premium x64 last month and everything was fine until a few days ago, when sleep mode stopped working. When I close my lid and open it up after some time there are 2 things that might happen:
1. The screen is just black, all the buttons are lit, I hear the fan, but no reaction at all. So I just forcibly turn off and turn it on again.
2. After opening the lid, nothing happens, when I try to turn it on, it loads up, but informs me that windows has not shut down properly last time (or something like that).
When I put my computer in Sleep mode, using the start button / shutdow / sleep it "sleeps" for about 10 minutes and wakes up on its own! Could it be programs trying to run in the background that wakse it up; Carbonite Backup or Norton? I can't get the computer to remain in sleep mode!
I have been getting BSODs after waking my computer up after stand by. I've tried Googling the situation as well as performing basic troubleshooting tasks such as sfc, chkdsk, virus scans... no luck. According to the event viewer, it says :
"The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff8800f20044c, 0xfffff8800679e378, 0xfffff8800679dbd0). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 110112-8190-01."
My computer crashes right after it wakes up from sleep mode.I used MSDaRT to diagnose the problem, and obtained a Analysis.log file, but I can't figure out where the problem is.Here is a copy of the contents of the file:
Code: Opened log file 'C:Windowsmsdart_crashanalyzer_kd_ansi.log' Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:WindowsMEMORY.DMP] Kernel Summary Dump File: Only kernel address space is available
I get intermittent freezing on waking from sleep mode, and indeed occasionally it wakes up immediately after sleeping.
I looked in the event manager and after 2 separate occasions of it freezing on waking up, it's come up with vwififilt as the culprit. I hope I've uploaded a screengrab correctly.
I can't find anything online which distinguishes why this file is not loading and causing a freeze on waking from sleep mode.
Any ideas on what I can do to remedy this problem? And also why I might be getting this sporadic problem of the system waking immediately after sleeping?
I have been using sleep mode for a while. Until recently, I had to re-install my OS due to some troubleshooting and hardware issues. Now my PC won't wake up from sleep mode with the new install. She goes to sleep, and when I try to wake her up, she powers on, for like 2 seconds and then shuts off. I have to turn on the power switch to get it to boot. My pc is not a generic brand pc. It's a custom built water cooled pc. I haven't noticed any new driver installs. I have performed a clean start up with no insight to what the issue could be. Event viewer only shows what I expected.
The system has rebooted without cleanly shutting down first. - Event 41, Kernel Power Session "Microsoft Security Client OOBE" stipped due to the following error: 0xc000000D Event 3, Kernel-Event Tracing
I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode.System Specs:Windows 7Home Premiumx64 bitOEMThe entire system is a little under 2 weeks old.
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up, record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
I have the TP-Link USB Wireless adapeter (TL-WN722N) It always reconnects after sleep mode or I have to do it manually and it takes a long time to reconnects all the time?
***DO NOT say to uncheck " Allow the computer to turn off this device to save power" option! This DOES NOT work for me and it has no effect whatsoever!***
my computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.
So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.
My computer is Windows 7 64-bit, OEM version from Acer.
7 x64 goes in/out of Sleep Mode successfully, but Aero Peek's visual effects disable approx. 2 sec. after the system wakes. If I log out/on the effects are still disabled; I have to reboot to establish.
Phenom 9850 x4 2.5 GHz GeForce 9600 GS
* I also have issue with right-clicking and Explorer crashing, however mine only occurs when I right-click on the Recycle Bin, and only after my computer has been running for awhile and I am recycling multiple files.
I just bought a Gateway computer yesterday with Windows 7 preinstalled on it, and last night I tried to wake it from sleep but when I did, it didn't show the taskbar, icons or start button. All I could see was the background. I tried the "ctrl+shift+esc" method to fix it, but when I hit those keys nothing happened. I'm at a loss, and I don't want to return the computer!
When I try to wake my machine from S3 sleep mode I see the hard drive lights power up but nothing happens, I get a black screen for about 5-6 seconds then my machine proceeds to boot loop itself until i manual shut it down with the power button. Sometimes it will start up regularly with no problems, and about 60-70% of the other times it will do the problem i have explained above.
Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the touch screen doesn't work (both pen and finger touch)
I have tried to change USB settings but I haven't seen any fix. A restart of the machine means the tablet works again. Any ideas about a patch until Lenovo makes new drivers for Windows 7?
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
So I purchased a Razer Naga because I loved the idea of 12 buttons right on the side for my thumb and since I work at home and pretty much just sleep, eat, and work around this computer I only put it on Sleep Mode. But when I moved my mouse around the next day it wouldn't start up. So I unplugged it and took it back got another one. Same problem occurred. Check to see if it would wake the computer from standby and it was checked. So then I moved on to updating the Firmware. Problem still occurred. So I'm wondering is this Razer's fault or perhaps my Motherboard not being power up enough? I do have a 5 year old power supply on my high end computer that's 550 watts due to my 1000 watt dying.
I restart my PC spam F8 and enable test mode. Windows boots up and then... nothing. it's normal windows starting without the watermark in either corner and I can't install drivers without certification.
One day i was on my computer and it crashed and since then every time i try and open up my computer normally it will reach the point where my user has to log in and cut out just before. Can still hear windows just my screen says "no connection with pc". Ive tried other wires/monitors and stuff and nothings worked.I have a Nvidia graphics card and ive tried completely removing my nvida files and reinstalling the drivers from the website. When i uninstalled the graphics driver it allowed me back onto windows normally except when i reinstalled the driver (on the normal version of windows not saftey) after the restart it went back to the same problems.
I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
I have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
Everytime my Windows 7 Home PC wakes from sleep mode, there's no internet connectionWhen I run the Troubleshoot Problem tool, it always has to reset the LAN which fixes the issue. How do I resolve this issue for good?
I have Windows 7 Ultimate x64. I just recently decided to start trying to put my PC to sleep rather than just let it run constantly when I'm not using it, and found that when I resume it, even if it's IMMEDIATELY after putting it to sleep, there is no sound.The only "fix" I've found is to either reboot, or (the quicker method) is to disable and enable the sound card in device manager. Sound then immediately returns.Obviously this is far from ideal and I'd love for it to just function properly. Any ideas? My sound is onboard Realtek HD audio on a Biostar A770E3 motherboard.
I have no speaker sound when the computer wakes up from sleep mode. (Realtec high definition audio). The only work around I can find is to unplug the jack at the back and plug it in again. Is there a way to solve this issue
I have a Lenovo e525 laptop with windows 7 ultimate x64 and a second hard drive where the dvd drive was, when I wake from sleep any of the following can happen: - It wakes but the screen is dimmed and the brightness buttons don´t work so I have to reboot. - It wakes to the screen off, I have to reboot. - It wakes then after up to 30 seconds an error pop up shows and the laptop reboots without shutting down. - It wakes then after up to a minute it reboots without shutting down. - It wakes fine and I can use it, 1 out of 10 times.
My computer will BSOD after waking up from it's sleep. Now it wasn't a usual occurrence, it just lagged but lately it always went to blue screen after waking up.I checked, there are no Flash Drives plugged in, but the USB for the wireless mouse is plugged in but that never had any affect before.
I've tried removing AVG using their removal tools and instructions. I've tried fully removing my video and mobo drivers with driver sweeper and installing the latest GPU and Motherboard drivers and flashed the latest Motherboard BIOS. I've scoured forum after forum and seen similar issues and tried countless solutions. I haven't seen someone with my -exact- problem and -exact- spec/error reports so I'm caving lol. I build and maintain PC's as a hobby and I like to solve problems on my own know-how but I am at wits end with this BSOD.
Quick specs: Windows 7 Ultimate 64-bit 8 gigs DDR3 Gskil AMD Phenom II X4 955 Denab Nvidia GeForce GTS 250 (x2 SLI) Asus M4N75TD nForce 740a Malwarebytes Antimalware
