Windows 7 64bit Boot Loops Waking From Sleep Mode
Mar 29, 2012
When I try to wake my machine from S3 sleep mode I see the hard drive lights power up but nothing happens, I get a black screen for about 5-6 seconds then my machine proceeds to boot loop itself until i manual shut it down with the power button. Sometimes it will start up regularly with no problems, and about 60-70% of the other times it will do the problem i have explained above.
View 1 Replies
ADVERTISEMENT
Jun 8, 2011
So, I shutdown my computer this morning and it was installing 96 updates, so I left it and went to school. I came back after 6-7 hours and it was stuck on 68/96 updates installing, I left it for another 30 min and it was still on 68/96. I decided to press the reset button, even though it said please don't unplug or turn off comp while updating. Now whenever I boot up, it says configuring updates 0%, after about 5-10 min it'll just boot to desktop. And whenever I shutdown, it'll do the same process again, installing updates 1/80, I'm not sure if it ever reaches 80/80 but it shuts down. And when I boot up again same deal... I'll actually have not sat infront of it and monitor the numbers, but in the meantime, is there a fix for this? This is shittttty, cuz I just reformatted comp.
View 2 Replies
View Related
Mar 13, 2012
I have been using sleep mode for a while. Until recently, I had to re-install my OS due to some troubleshooting and hardware issues. Now my PC won't wake up from sleep mode with the new install. She goes to sleep, and when I try to wake her up, she powers on, for like 2 seconds and then shuts off. I have to turn on the power switch to get it to boot. My pc is not a generic brand pc. It's a custom built water cooled pc. I haven't noticed any new driver installs. I have performed a clean start up with no insight to what the issue could be. Event viewer only shows what I expected.
The system has rebooted without cleanly shutting down first. - Event 41, Kernel Power Session "Microsoft Security Client OOBE" stipped due to the following error: 0xc000000D Event 3, Kernel-Event Tracing
View 1 Replies
View Related
Oct 12, 2011
When I put my computer in Sleep mode, using the start button / shutdow / sleep it "sleeps" for about 10 minutes and wakes up on its own! Could it be programs trying to run in the background that wakse it up; Carbonite Backup or Norton? I can't get the computer to remain in sleep mode!
View 4 Replies
View Related
Nov 2, 2012
I have been getting BSODs after waking my computer up after stand by. I've tried Googling the situation as well as performing basic troubleshooting tasks such as sfc, chkdsk, virus scans... no luck. According to the event viewer, it says :
"The computer has rebooted from a bugcheck.
The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff8800f20044c, 0xfffff8800679e378, 0xfffff8800679dbd0).
A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 110112-8190-01."
View 2 Replies
View Related
Jan 17, 2012
My computer crashes right after it wakes up from sleep mode.I used MSDaRT to diagnose the problem, and obtained a Analysis.log file, but I can't figure out where the problem is.Here is a copy of the contents of the file:
Code: Opened log file 'C:Windowsmsdart_crashanalyzer_kd_ansi.log'
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available
[code]......
View 4 Replies
View Related
Jan 17, 2012
I get intermittent freezing on waking from sleep mode, and indeed occasionally it wakes up immediately after sleeping.
I looked in the event manager and after 2 separate occasions of it freezing on waking up, it's come up with vwififilt as the culprit. I hope I've uploaded a screengrab correctly.
I can't find anything online which distinguishes why this file is not loading and causing a freeze on waking from sleep mode.
Any ideas on what I can do to remedy this problem? And also why I might be getting this sporadic problem of the system waking immediately after sleeping?
View 9 Replies
View Related
Apr 24, 2012
I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode.System Specs:Windows 7Home Premiumx64 bitOEMThe entire system is a little under 2 weeks old.
View 1 Replies
View Related
Jul 9, 2012
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up, record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
View 6 Replies
View Related
Nov 27, 2012
I have the TP-Link USB Wireless adapeter (TL-WN722N) It always reconnects after sleep mode or I have to do it manually and it takes a long time to reconnects all the time?
***DO NOT say to uncheck " Allow the computer to turn off this device to save power" option! This DOES NOT work for me and it has no effect whatsoever!***
View 3 Replies
View Related
Mar 12, 2012
my computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.
So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.
My computer is Windows 7 64-bit, OEM version from Acer.
View 3 Replies
View Related
Nov 22, 2009
7 x64 goes in/out of Sleep Mode successfully, but Aero Peek's visual effects disable approx. 2 sec. after the system wakes. If I log out/on the effects are still disabled; I have to reboot to establish.
Phenom 9850 x4 2.5 GHz
GeForce 9600 GS
* I also have issue with right-clicking and Explorer crashing, however mine only occurs when I right-click on the Recycle Bin, and only after my computer has been running for awhile and I am recycling multiple files.
View 9 Replies
View Related
Mar 2, 2010
I had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time I wake up my computer, the ipv6 cannot work. The appearance is that I can't ping and access ipv6 website. But after some research, I realize that only the DNS part is broken. When I ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if I use nslookup, I can find the ipv6 address. And the following are my tries:
ping ipv6.google.com -- not work
ping 2a00:1450:8001::68 -- does work, the ip is the ipv6.google.com address
ping -6 ipv6.google.com -- does work like the above
View 2 Replies
View Related
Oct 31, 2012
Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
View 5 Replies
View Related
Sep 23, 2011
My netbook was working normally but I was running low on space so I decided to run a disk cleanup. I opted to compress the files as well. Then I put the netbook to sleep.
Trying to restart this morning, the "Toshiba" screen came up (with access to the boot menu) and immediately after a black screen with the following message appears:
YKNRE is compressed
Press Ctrl+Alt+Del to restart
When I follow the instructions, the same cycle repeats. This is a nebook without a CD drive. I am traveling in Iran and am stuck.
View 9 Replies
View Related
Sep 18, 2012
I have a HP Pavillion dv6 which originally came with Windows Vista Home Premium x32, recently upgraded to Win 7 x64 clean install, and has been relatively problem-free. But, everytime laptop sleeps, I get a BSOD upon waking up every single time! updated all drivers to latest (compatible with win 7 x64). even updated BIOS. d
View 4 Replies
View Related
Nov 5, 2012
I don't know if it's Microsoft's bad OS or this crumby Korean computer - but it sucks to be back with Windows after a decade of Macintosh!This computer randomly fails to wake up. The mouse icon moves, but my screens are all black. I can control-alt-delete to raise the task manager screen. But then clicking does NOTHING.Windows is a **** OS. I hate it. It's always pissed me off since Bill Gates "created" it. Click click click - are you sure you want to click? Why don't you click some more? click click click. Would you like to click again? Are you sure you'd like to click again? And how about all those REALLY helpful popup windows.So thoughtful and caring.Oh yeah, windows. That's why. Such vision.Bill Gates has NO TASTE! I wish Steve Jobs was still alive!here are so many stupid bugs in this system.It reminds me of Millennium Edition. DOes anyone remember that BS? If I didn't need this shite for work I'd burn it. Or enjoy hacking it to bits with an axe.Can anyone help me sort this out? Or am I doomed to continually click stupidly until my tendons freeze up with carpal tunnel and my eyes fall out from staring at the ugly designs everywhere?Lastly, there's an infuriating naming bug - sometimes Windows 7, so intelligently designed, believes a file is open when it is not. Windows won't let you change the name of a file or folder if it believes a file in that folder is open. Brilliant. So, guess what? Yeah, I can't change the effing file name and have to shut down the computer. Since I work in a firm with a high volume of files changing names frequently, I can't tell you how much this pisses me off.Somebody get Windows to hire someone with creative vision who understands how to streamline operations! Someone teach Bill Gates how to paint a picture!In the meantime, I'm going to work on convincing my entire office to move to Mac.
View 3 Replies
View Related
May 29, 2012
Win 7 64-bit desktop
OEM OS
Machine age = approx 2 years.
OS has not been reinstalled since purchase.
My computer restarts while waking up from sleep. Can't remember when it started, I reckon about 5-6 months ago, maybe more.
View 1 Replies
View Related
May 3, 2012
As of today I have been getting a BSOD on 95% of my start-ups from sleep mode (close lid or press power button - as I setup)I cannot figure this one out, please provide me with some insight.As per forum standards I have included the information below along with the attachments. Windows 7 . . .- x86 (32-bit) or x64 ? WINDOWS 7 HOME PREM OA 64Bit - the original installed OS on the system? YES, Re-installed on SSHD - an OEM or full retail version?Purchased it from retailer- What isthe age of system (hardware) New, just purchased (MSI X460DX) - What is the age of OS installation New, 1 week.
View 3 Replies
View Related
Mar 18, 2012
I recently installed Windows 7 Professional 64 bit on a machine utilising an Asus M4N82 Deluxe motherboard. I subsequently installed all current drivers for use with Windows 7 64 bit for the Mobo downloaded from the Asus website. Windows 7 itself found current drivers for the peripherals that it supports. For the first few days all ran well without any issues. Then Win 7 ran some updates and now whenever I awake my computer from sleep mode it tells me that the audio driver is not installed. No audio drivers display in Device Manager either. The sound,video, and audio controllers entry is simply gone! A restart brings it back--or has so far--but what is causing it and is there anything I can do? I have uninstalled and reinstalled the driver to no avail. From web searches this seems to be a common problem with no clear answer which likely means it is an issue with MS at the root of it and unwilling or unable to address it.
I have Win 7 on an SSD. Would it be safe to set the Sleep Mode to never or set a clock screensaver?
View 1 Replies
View Related
Dec 3, 2011
She asked me to restore her computer to factory settings. She is not at all tech savvy, so I know for a fact she did not do anything to mess it up. It was running fine, but she just wanted to clean it out and bring it back to like new. She pretty much only uses her computer for school papers and email. I have done factory recovery on many computers at this point and I have never had any problems at all until now.
First thing I did was hook up my external hard drive and saved all of her documents and pictures. I then restarted the computer and pressed F8 and then clicked on repair my computer. It took me to datasafe backup and restore. I went as far as to restore the factory image. I chose not to save any files and to restore it to new again. It completed as normal and I clicked restart.When it restarts, a list of files pops up and then it says "Setup is preparing your computer for first use." It also shows another list of files that seem to be loading as well as it tells me that it is booting in safemode. Next thing it says is that "Setup will continue after restarting your computer". It then continues to restart and perform this boot loop until I turn it off.
I tried to repair the computer and it would fail saying it was offline. So, I plugged the hard drive into an adapter to hook it to my other computer. I opened the disk manager. I saw that the recovery partition was not active like it is on my other hard drives. I also see that for some reason it has a tiny partition that is labeled fat. On my other hard drives it is labeled oem partition. Not sure if this makes a difference or not, but thought it was worth mentioning. Also, when I choose to explore the recovery partition, it says the recovery folder is empty, however the properties say it is nearly full with many files. On my other hard drives I can not access that folder at all. I also am not sure if this matters or not, but didn't want to let anything I am doing go unnoticed.
View 4 Replies
View Related
Jul 28, 2011
The pc specs I have are: Amibios, Pentium dual-core,cpu E6600@3.06 GHz,CPU mem 2048mb (dual) speed 3.31GHz. I have no idea how to fix this. The pc crashed in WIN 7 after accepting updates and WIN XP crashed after upgrading to IE 9.This pc is set up to dual boot. However, when the pc tries to boot the screen is black with white text and it has these options: WIN 7/64 bit, WIN 7/32 bit and WIN XP earlier version.No matter which OS I choose, it just loops to windows start-up repair and the results are always windows cannot automatically repair this computer.Safe mode is not accessible and if it starts to load at all, these errors show-KDCOM.DLL corrupt and SPTD.SYS hit enter shows. I thought I had a bootable WIN XP disk, but it is not. Therefore,I cannot try to do repairs that a way.I never got the WIN 7/ 64 bit cd, yet it shows as drive "e". Weekly I check for updates on these utilities and then I run CCleaner, Winclean for the registry part and if necessary Road kill then Malwarebytes all in safe mode when it worked.
Here are a few other things I tried and got results from:
*Memory test= passed
*Safe Mode= never happens no matter what OS I choose
*Last known good config= never works
*loops in start-up repair cannot fix issues-no matter what OS choice is made from the black screen
*never tried to disable auto start-up from black screen because I did not understand this option well or even thought it would be a benefit. Any tips would be appreciated.
View 2 Replies
View Related
Oct 10, 2011
system:GA-Z68X-UD4-B3G Skill ripjaws 1600 8gbi5 2500KGTS 250Lite-On ihas324Cavia Green 1.5 TBAntec 620c neo ecoAntec 300 caseok, where do I begin.... So my computer went into sleep mode.... its really hit or miss with this computer so when I finally get it back up and running, I will completely disable sleep mode.Sometimes i can click the mouse and it wakes up with no problem, but sometimes it would reboot on its own and just keep trying to boot and restart.... continuous boot loop.... so when i want to remedy this, I just clear the cmos by unplugging the power supply and disconnecting the cmos battery.... it always worked I tried to pull the battery and left it out for 60 minutes.. popped it back in and it won't let me get into bios. None of my keyboards will light up for me to hit delete to get into bios.... not even my PS2 keyboard.... it will just continue to turn on, and show the logo screen telling me to hit various keys for various functions and then it will reboot on its own and it will just continue to do this and will not let me hit a key to get into the BIOS screens
View 20 Replies
View Related
Apr 5, 2012
I fell asleep with my PC on and woke up with it stuck in sleep mode. I performed a hard shut down via holding down the power button for several seconds. Now the pc will not post and my monitor claims no signal. No beeps from the Mobo speaker. I've replaced my cmos battery so far.Mobo is an asus m3a79-t Deluxe and I've heard some issues of bios not supporting sleep modes?
View 9 Replies
View Related
Feb 15, 2012
When the computer "wakes" from sleep all i get is a backround, I can move a mouse around but thats it. Windows 7 operating system.
View 5 Replies
View Related
Jul 21, 2012
My computer fails about 1/4 of the time when waking up from standby (sleep). I've attached all the necessary files.
View 9 Replies
View Related
Apr 7, 2011
Everytime my Windows 7 Home PC wakes from sleep mode, there's no internet connectionWhen I run the Troubleshoot Problem tool, it always has to reset the LAN which fixes the issue. How do I resolve this issue for good?
View 8 Replies
View Related
Aug 27, 2012
I have Windows 7 Ultimate x64. I just recently decided to start trying to put my PC to sleep rather than just let it run constantly when I'm not using it, and found that when I resume it, even if it's IMMEDIATELY after putting it to sleep, there is no sound.The only "fix" I've found is to either reboot, or (the quicker method) is to disable and enable the sound card in device manager. Sound then immediately returns.Obviously this is far from ideal and I'd love for it to just function properly. Any ideas? My sound is onboard Realtek HD audio on a Biostar A770E3 motherboard.
View 5 Replies
View Related
Dec 31, 2012
I have no speaker sound when the computer wakes up from sleep mode. (Realtec high definition audio). The only work around I can find is to unplug the jack at the back and plug it in again. Is there a way to solve this issue
View 5 Replies
View Related
Apr 28, 2012
I have a Lenovo e525 laptop with windows 7 ultimate x64 and a second hard drive where the dvd drive was, when I wake from sleep any of the following can happen: - It wakes but the screen is dimmed and the brightness buttons don´t work so I have to reboot. - It wakes to the screen off, I have to reboot. - It wakes then after up to 30 seconds an error pop up shows and the laptop reboots without shutting down. - It wakes then after up to a minute it reboots without shutting down. - It wakes fine and I can use it, 1 out of 10 times.
View 14 Replies
View Related
Jun 29, 2011
I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?
View 5 Replies
View Related