BSOD - Boot From Sleep Mode?
May 3, 2012
As of today I have been getting a BSOD on 95% of my start-ups from sleep mode (close lid or press power button - as I setup)I cannot figure this one out, please provide me with some insight.As per forum standards I have included the information below along with the attachments. Windows 7 . . .- x86 (32-bit) or x64 ? WINDOWS 7 HOME PREM OA 64Bit - the original installed OS on the system? YES, Re-installed on SSHD - an OEM or full retail version?Purchased it from retailer- What isthe age of system (hardware) New, just purchased (MSI X460DX) - What is the age of OS installation New, 1 week.
View 3 Replies
ADVERTISEMENT
Jun 3, 2012
After putting my computer to sleep, upon waking I receive an error code, which should be present in the dump file. I closed the error window before copy pasting it in here. I will update the post with the error information next time it happens. This only happens when putting my computer to sleep. Hibernate and shutdown do not have this problem, and I have not received any BSOD's during use. This has been happening for about 10 days. My memory set up is kind of strange. I have 2x1GB 1.8V ram and 2x2GB 2.1V ram, both DDR2, and both running at 2.0V. I didn't want to overvolt the 1.8V ones too much. The timings are slightly loosened on the 2.1V ram to match those of the 1.8V ram. I have run Memtest86 with no errors. My hard drives have also checked out fine.I have my q6600 overclocked to 3.0GHz, with a voltage increase, CPU-Z is saying it is running at 1.408V. I have run plenty of Prime95 tests. No stability problems, and temperatures are always acceptable. I have had it at this overclock for 7 months, ran at stock the previous 4-5 years. My GTX 460 is overclocked as well, always has been stable as well, with temperatures plenty low enough.
View 1 Replies
View Related
Jun 21, 2012
Ive been having a blue screen of death after reawakening my computer from sleep mode.It does not always happen but it happened 3 times already.I'm using windows 7 professional 64 bit full retail version
View 4 Replies
View Related
Jan 10, 2012
i am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.
View 4 Replies
View Related
Feb 23, 2012
I seem to be getting BSOD every time I come out of sleep mode with my new laptop (Asus G74SX-TH71). I put in an SSD did a clean install of Windows 7 Professional x64. I have disabled the bluetooth in device manager deliberately as I don't plan on using it.
View 4 Replies
View Related
Apr 19, 2012
I have a Dell Studio 17 laptop running Windows 7 Home premium 32 bit It was an upgrade from Microsoft as an OEM product to replace the original Dell Vista OEM OS
The laptop is 3 years old.
Whenever the system is pout into sleep or hibernation, or when the lid id closed, it does not enter sleep mode, but crashed. On restarting the usual error message ststing that windows did not shut down correctly is displayed.
View 1 Replies
View Related
Apr 23, 2012
In the last 2-3 months I've had about 10 of the BSOD. I am trying to debug them, I turned on verifier for non Microsoft drivers and now I have a crash dump. Here is the crashdump, with and without the verifier. I am using Dell XPS laptop, with Windows 7 Home Premium Service Pack 1, 64bits.
View 2 Replies
View Related
Aug 17, 2012
I've been getting a BSOD fairly regularly when trying to enter sleep mode. I attached all the seven forums info but if theres anything else you need let me know.EDIT - Ive been messing around with it a bit and it seems the the BSOD can appear when trying to go into sleep or hibernate mode. It shows up inconsistently in both modes.
View 3 Replies
View Related
Nov 2, 2012
I have been getting BSODs after waking my computer up after stand by. I've tried Googling the situation as well as performing basic troubleshooting tasks such as sfc, chkdsk, virus scans... no luck. According to the event viewer, it says :
"The computer has rebooted from a bugcheck.
The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff8800f20044c, 0xfffff8800679e378, 0xfffff8800679dbd0).
A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 110112-8190-01."
View 2 Replies
View Related
Dec 2, 2011
I have noticed that my desktop will not enter sleep mode. Instead, the screen enter energy saving mode and the system continues to remain active for about 10 minutes before turning off. As long as my system does not enter sleep mode, it works just fine. According to the dump file, the issue is caused by ntoskrnl.exe and an errormessageDRIVER_POWER_STATE_FAILURE.
View 2 Replies
View Related
Aug 7, 2012
I am currently experiencing a BSOD after I put my computer into hibernate/sleep mode. Model: U46E-BAL6 ASUS, After I restart my computer, the windows crash report says the problem lies in my 080712-18283-01.dmp 080712-18283-01.dmp and a 2nd BSOD happened a little after, and the problem file is 080712-16395-01.dmp 080712-16395-01.dmp I have attached both files below, could someone take a look and solve the problem?
View 1 Replies
View Related
Dec 15, 2012
Some weeks ago I made a reinstall of my Win7 Home Premium x64 (a Dell M1330 with 4gb RAM). After then, my machine starts having random BSOD errors when going or recovering from sleep or hibernate mode. The error is a DRIVER_POWER_STATE_FAILURE, with code 0x0000009f.I attach here the info grabbed with W7F Diagnostic Tool, CPU z pictures and RAMmon html report. If it helps, here is the info I see with WinDbg looking the last minidump.
Code: Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump121412-26286-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code]....
View 3 Replies
View Related
Jul 6, 2012
I recently put together a new computer and installed Windows 7 on it. Everything seems to work fine, except when I resume using the computer after it goes to sleep, I get a BSOD. When I wake the computer up, it shows me the log-in screen, but when I click on my user profile to log in a blue screen appears. Also, it only seems to happen when the computer enters sleep mode on its own. If I put it into sleep mode, it wakes up with no problems.
View 3 Replies
View Related
Dec 17, 2011
Here are my system specs:[CODE]
View 3 Replies
View Related
Apr 24, 2012
I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode.System Specs:Windows 7Home Premiumx64 bitOEMThe entire system is a little under 2 weeks old.
View 1 Replies
View Related
Jun 13, 2012
Recently purchased a refurbished PC (last week) and have come across my first BSOD. I don't know the code of the BSOD. Basically what happened is, I was using Sony Vegas (a video editing software), put the computer to sleep (for around 10mins i think) and when I turned it back on I was instantly met with the BSOD. I really don't have any more info to divulge than that. I've been told my PSU is underpowered for this machine (405w) and I am currently in the process of purchasing a 650w PSU. Just throwing that out there, not sure if that has anything to do with the BSOD.
Specs:
Processor: Intel Core i7-2600
Operating System: Windows 7 Home Premium 64bit
RAM: 8 GB
View 8 Replies
View Related
Jul 17, 2012
I'm having a very annoying problem where my laptop will begin to enter sleep mode, but instead of powering down it keeps running for a few minutes and then crashes.When I start up my laptop again I get this
[code]...
View 3 Replies
View Related
Aug 29, 2012
Computer shows the BSoD when exiting Sleep mode and Hibernate mode too. I have attached the SF file.
View 6 Replies
View Related
Aug 31, 2012
I keep getting BSOD when I try to put my 5 year old HP Pavilion dv6000 laptop in sleep mode, by either tapping the power button, or going through the start menu. This started happening a couple days ago, after Windows did an update.
I've done a system file check and it came up clean, and I also updated my video drivers, but to no avail. I don't really know where to go from here.
View 9 Replies
View Related
Jul 10, 2012
My problem is on a Media Center machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x2 GB Kingston ram
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB
My previous setup was with a AMD 240e. I use Microsoft Security Essentials for antivirus and have firewall turned on. The Media Center machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings. Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wake up is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity. I have made several new install and tried to exclude the SSD and install a 32 bit Win7 - but the BSOD still occurs 4-5 min after awake.
View 3 Replies
View Related
Mar 12, 2012
my computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.
So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.
My computer is Windows 7 64-bit, OEM version from Acer.
View 3 Replies
View Related
Aug 31, 2012
I am totally new to this and am really confused. About maybe a week ago I started having BSOD, plus Windows wouldn't restart after going into Sleepmode, and when I tried to Shut Down it would bring up the shut down screen then just keep "shutting down" with out ever shutting down.
So I read some internet stuff and "Reinstalled Windows 7" and seem to still have the issues.
[code]....
View 3 Replies
View Related
Dec 11, 2012
I've had this Dell Studio 17 laptop for a few years now, and have ran into a few problems in the past. However, in the past few weeks, the computer seems to blue screen almost every time I close the lid and it enters sleep mode. This has not happened at all while the computer itself has been running. Here is the minidump file from this morning. All of the 8-10 minidumps since 12/11 seem to point to "ntkrnlmp.exe", if I'm reading that correctly.
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
subsystem.
[code]....
View 2 Replies
View Related
Oct 10, 2011
system:GA-Z68X-UD4-B3G Skill ripjaws 1600 8gbi5 2500KGTS 250Lite-On ihas324Cavia Green 1.5 TBAntec 620c neo ecoAntec 300 caseok, where do I begin.... So my computer went into sleep mode.... its really hit or miss with this computer so when I finally get it back up and running, I will completely disable sleep mode.Sometimes i can click the mouse and it wakes up with no problem, but sometimes it would reboot on its own and just keep trying to boot and restart.... continuous boot loop.... so when i want to remedy this, I just clear the cmos by unplugging the power supply and disconnecting the cmos battery.... it always worked I tried to pull the battery and left it out for 60 minutes.. popped it back in and it won't let me get into bios. None of my keyboards will light up for me to hit delete to get into bios.... not even my PS2 keyboard.... it will just continue to turn on, and show the logo screen telling me to hit various keys for various functions and then it will reboot on its own and it will just continue to do this and will not let me hit a key to get into the BIOS screens
View 20 Replies
View Related
Sep 23, 2011
My netbook was working normally but I was running low on space so I decided to run a disk cleanup. I opted to compress the files as well. Then I put the netbook to sleep.
Trying to restart this morning, the "Toshiba" screen came up (with access to the boot menu) and immediately after a black screen with the following message appears:
YKNRE is compressed
Press Ctrl+Alt+Del to restart
When I follow the instructions, the same cycle repeats. This is a nebook without a CD drive. I am traveling in Iran and am stuck.
View 9 Replies
View Related
Apr 5, 2012
I fell asleep with my PC on and woke up with it stuck in sleep mode. I performed a hard shut down via holding down the power button for several seconds. Now the pc will not post and my monitor claims no signal. No beeps from the Mobo speaker. I've replaced my cmos battery so far.Mobo is an asus m3a79-t Deluxe and I've heard some issues of bios not supporting sleep modes?
View 9 Replies
View Related
Mar 29, 2012
When I try to wake my machine from S3 sleep mode I see the hard drive lights power up but nothing happens, I get a black screen for about 5-6 seconds then my machine proceeds to boot loop itself until i manual shut it down with the power button. Sometimes it will start up regularly with no problems, and about 60-70% of the other times it will do the problem i have explained above.
View 1 Replies
View Related
Mar 11, 2012
i keep having this issue. Anyone knows how to solve? My minidump is
View 1 Replies
View Related
Aug 10, 2012
getting BSOD after boot and desktop comes up. i can get in safe mode without BSOD coming up. Attached SF Diagnost. from my Dell Laptop.
View 3 Replies
View Related
Nov 9, 2012
i recently tried removing some malaware from a laptop that kept rederecting my webpages. I used Hitman Pro and after scanning with it it asked me to reboot for the changes to take affect. One it rebooted igot the BSOD message. i Cant boot in safe mode so im lost on what option i have left. The main point is that i dont want to preform a clean install, and delete my documents.
View 3 Replies
View Related
Mar 31, 2012
My motherboard is a Gigabyte Z68XP-UD3 Revision 1.3, my OS is Windows 7 Professional 64 bit, my HDD is a Seagate 1.5tb, and my SSD is an OCZ Agility 3 60gb.
So i was using Intel Smart Response technology with my SSD for SSD caching, everything was pretty much working fine. The other day i flashed my bios using @BIOS without properly disabling my smart response configuration, which i probably shouldn't have done and i won't do again. When i rebooted, Intel Rapid Storage technology was acting up and when i tried to open it, it said "IAStorUI.exe has stopped working". After that, i uninstalled the program and tried to re-install it, but during the install it said "This computer does not meet the minimum requirements for installing the software." After a little research, i found out that it meant that my bios was set in IDE mode instead of ACHI mode. I am not sure what the mode was before i flashed my bios, but it was probably some sort of raid that it used for SSD caching. When i went into the bios and switched from IDE to AHCI, windows would blue screen after performing a few seconds of the boot logo. I switched back to IDE, and did some research to find out about the "Start" registry in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci. I switched that from 3 to 0, and windows was able to boot into AHCI mode and automatically got drivers. Then, i tried re-installing Intel Rapid Storage technology. It was able to install, and i rebooted my computer. It blue screened again on the same part of the boot logo as before. I had to switch back to IDE mode to get it working again. Then, i got new chipset drivers from Intel's website, which didn't help. The registry that i changed is still set to zero, but it just won't successfully boot with AHCI like it did the first time i changed the registry. I am very stumped and i dont know what i could do to make it work like it did before i flashed my bios. My friend recommended that i should reinstall windows, but then i would have to go through the trouble of getting everything back and i think there should be some way of doing this without reinstalling the os.
The bottom line is that windows blue screens when the bios is in AHCI mode, even though i have the registry that should fix that and that did fix it on one boot set to zero.
View 1 Replies
View Related
