My problem is on a Media Center machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x2 GB Kingston ram
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB
My previous setup was with a AMD 240e. I use Microsoft Security Essentials for antivirus and have firewall turned on. The Media Center machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings. Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wake up is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity. I have made several new install and tried to exclude the SSD and install a 32 bit Win7 - but the BSOD still occurs 4-5 min after awake.
I have a 32 bit Windows 7 Lenovo Thinkpad L412. In the past few weeks I have re-imaged my hd to factory state (as I do often).After a few days it begins to go into sleep or stand-by mode after being left idle for around 5-10 minutes. It does not turn off, or actually hibernate, it simply goes to the user log-in screen prompting for a password to return to the desktop.I have no idea why. I am not a noob or anything, I have checked the power options, and power manager and changed all settings for sleep/hibernate/standby to never, including the power plan I am on.I can find absolutely no reason why it is going to the log-in screen.HOWEVER, I think it only starts doing this after I have opened and set-up Windows Media Center. After putting my TV tuner in via USB and setting up my TV in windows media (which works fine), the comp begins going to sleep after 5-10 minutes.It will do this indefinitely, even if I take the PC tuner out or close WMC, or restart.
How a machine Windows 7 or XP once goes to sleep/hibernate mode, can be identified on the network to do a Wake-On-LAN. Because the machine is shutdown, the ping does not give a response. In a DHCP environment, when the machine goes to sleep mode, the ip is released so not necessarily the machine can be identified with its IP.
I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
After putting my computer to sleep, upon waking I receive an error code, which should be present in the dump file. I closed the error window before copy pasting it in here. I will update the post with the error information next time it happens. This only happens when putting my computer to sleep. Hibernate and shutdown do not have this problem, and I have not received any BSOD's during use. This has been happening for about 10 days. My memory set up is kind of strange. I have 2x1GB 1.8V ram and 2x2GB 2.1V ram, both DDR2, and both running at 2.0V. I didn't want to overvolt the 1.8V ones too much. The timings are slightly loosened on the 2.1V ram to match those of the 1.8V ram. I have run Memtest86 with no errors. My hard drives have also checked out fine.I have my q6600 overclocked to 3.0GHz, with a voltage increase, CPU-Z is saying it is running at 1.408V. I have run plenty of Prime95 tests. No stability problems, and temperatures are always acceptable. I have had it at this overclock for 7 months, ran at stock the previous 4-5 years. My GTX 460 is overclocked as well, always has been stable as well, with temperatures plenty low enough.
Ive been having a blue screen of death after reawakening my computer from sleep mode.It does not always happen but it happened 3 times already.I'm using windows 7 professional 64 bit full retail version
i am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.
I seem to be getting BSOD every time I come out of sleep mode with my new laptop (Asus G74SX-TH71). I put in an SSD did a clean install of Windows 7 Professional x64. I have disabled the bluetooth in device manager deliberately as I don't plan on using it.
I have a Dell Studio 17 laptop running Windows 7 Home premium 32 bit It was an upgrade from Microsoft as an OEM product to replace the original Dell Vista OEM OS
The laptop is 3 years old.
Whenever the system is pout into sleep or hibernation, or when the lid id closed, it does not enter sleep mode, but crashed. On restarting the usual error message ststing that windows did not shut down correctly is displayed.
In the last 2-3 months I've had about 10 of the BSOD. I am trying to debug them, I turned on verifier for non Microsoft drivers and now I have a crash dump. Here is the crashdump, with and without the verifier. I am using Dell XPS laptop, with Windows 7 Home Premium Service Pack 1, 64bits.
As of today I have been getting a BSOD on 95% of my start-ups from sleep mode (close lid or press power button - as I setup)I cannot figure this one out, please provide me with some insight.As per forum standards I have included the information below along with the attachments. Windows 7 . . .- x86 (32-bit) or x64 ? WINDOWS 7 HOME PREM OA 64Bit - the original installed OS on the system? YES, Re-installed on SSHD - an OEM or full retail version?Purchased it from retailer- What isthe age of system (hardware) New, just purchased (MSI X460DX) - What is the age of OS installation New, 1 week.
I've been getting a BSOD fairly regularly when trying to enter sleep mode. I attached all the seven forums info but if theres anything else you need let me know.EDIT - Ive been messing around with it a bit and it seems the the BSOD can appear when trying to go into sleep or hibernate mode. It shows up inconsistently in both modes.
I have been getting BSODs after waking my computer up after stand by. I've tried Googling the situation as well as performing basic troubleshooting tasks such as sfc, chkdsk, virus scans... no luck. According to the event viewer, it says :
"The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff8800f20044c, 0xfffff8800679e378, 0xfffff8800679dbd0). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 110112-8190-01."
I have noticed that my desktop will not enter sleep mode. Instead, the screen enter energy saving mode and the system continues to remain active for about 10 minutes before turning off. As long as my system does not enter sleep mode, it works just fine. According to the dump file, the issue is caused by ntoskrnl.exe and an errormessageDRIVER_POWER_STATE_FAILURE.
I am currently experiencing a BSOD after I put my computer into hibernate/sleep mode. Model: U46E-BAL6 ASUS, After I restart my computer, the windows crash report says the problem lies in my 080712-18283-01.dmp 080712-18283-01.dmp and a 2nd BSOD happened a little after, and the problem file is 080712-16395-01.dmp 080712-16395-01.dmp I have attached both files below, could someone take a look and solve the problem?
Some weeks ago I made a reinstall of my Win7 Home Premium x64 (a Dell M1330 with 4gb RAM). After then, my machine starts having random BSOD errors when going or recovering from sleep or hibernate mode. The error is a DRIVER_POWER_STATE_FAILURE, with code 0x0000009f.I attach here the info grabbed with W7F Diagnostic Tool, CPU z pictures and RAMmon html report. If it helps, here is the info I see with WinDbg looking the last minidump.
Code: Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:WindowsMinidump121412-26286-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available
I recently put together a new computer and installed Windows 7 on it. Everything seems to work fine, except when I resume using the computer after it goes to sleep, I get a BSOD. When I wake the computer up, it shows me the log-in screen, but when I click on my user profile to log in a blue screen appears. Also, it only seems to happen when the computer enters sleep mode on its own. If I put it into sleep mode, it wakes up with no problems.
I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode.System Specs:Windows 7Home Premiumx64 bitOEMThe entire system is a little under 2 weeks old.
Recently purchased a refurbished PC (last week) and have come across my first BSOD. I don't know the code of the BSOD. Basically what happened is, I was using Sony Vegas (a video editing software), put the computer to sleep (for around 10mins i think) and when I turned it back on I was instantly met with the BSOD. I really don't have any more info to divulge than that. I've been told my PSU is underpowered for this machine (405w) and I am currently in the process of purchasing a 650w PSU. Just throwing that out there, not sure if that has anything to do with the BSOD.
Specs: Processor: Intel Core i7-2600 Operating System: Windows 7 Home Premium 64bit RAM: 8 GB
I'm having a very annoying problem where my laptop will begin to enter sleep mode, but instead of powering down it keeps running for a few minutes and then crashes.When I start up my laptop again I get this
I keep getting BSOD when I try to put my 5 year old HP Pavilion dv6000 laptop in sleep mode, by either tapping the power button, or going through the start menu. This started happening a couple days ago, after Windows did an update.
I've done a system file check and it came up clean, and I also updated my video drivers, but to no avail. I don't really know where to go from here.
my computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.
So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.
My computer is Windows 7 64-bit, OEM version from Acer.
I am totally new to this and am really confused. About maybe a week ago I started having BSOD, plus Windows wouldn't restart after going into Sleepmode, and when I tried to Shut Down it would bring up the shut down screen then just keep "shutting down" with out ever shutting down.
So I read some internet stuff and "Reinstalled Windows 7" and seem to still have the issues.
I've had this Dell Studio 17 laptop for a few years now, and have ran into a few problems in the past. However, in the past few weeks, the computer seems to blue screen almost every time I close the lid and it enters sleep mode. This has not happened at all while the computer itself has been running. Here is the minidump file from this morning. All of the 8-10 minidumps since 12/11 seem to point to "ntkrnlmp.exe", if I'm reading that correctly.
DRIVER_POWER_STATE_FAILURE (9f) A driver has failed to complete a power IRP within a specific time (usually 10 minutes). Arguments: Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp subsystem.
I'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
