Windows 7 Won't Boot After Disk Cleanup In Sleep Mode
Sep 23, 2011
My netbook was working normally but I was running low on space so I decided to run a disk cleanup. I opted to compress the files as well. Then I put the netbook to sleep.
Trying to restart this morning, the "Toshiba" screen came up (with access to the boot menu) and immediately after a black screen with the following message appears:
YKNRE is compressed
Press Ctrl+Alt+Del to restart
When I follow the instructions, the same cycle repeats. This is a nebook without a CD drive. I am traveling in Iran and am stuck.
View 9 Replies
ADVERTISEMENT
Apr 13, 2011
I ran the disk cleanup and it freed up several GB of space on my C drive (I have a Dell laptop with a C drive with about 62 GB of space and a D drive with 426 GB.I let it run overnight because it said it was going to take 6 hours (no idea how long it actually took).
It had either shut down or hibernated, so I turned it back on the next morning. Windows booted up, but has not been working--I can't use the shortcuts, and even if I click on something from the start menu it won't run. (Firefox, for example, or other programs). It gives me an error message about the data not being found with an I/O error.I am able to use the internet and some programs in Safe Mode, which is what I'm doing now.I can't use my audio system in Safe Mode.I have the upgrade CD for Windows 7--they sent it after I had bought the computer. Do I need to reinstall Windows 7?Can I do it from the update CD?Do I need to back up all of my files (photos, etc) before I reinstall it?
View 1 Replies
View Related
Nov 1, 2012
disk cleanup is not deleting any files and my local C disk is not getting any free space. I have used disk cleanup and tried to delete tham but when I try again they are still there can this be fixed
View 3 Replies
View Related
Mar 29, 2012
When I try to wake my machine from S3 sleep mode I see the hard drive lights power up but nothing happens, I get a black screen for about 5-6 seconds then my machine proceeds to boot loop itself until i manual shut it down with the power button. Sometimes it will start up regularly with no problems, and about 60-70% of the other times it will do the problem i have explained above.
View 1 Replies
View Related
May 3, 2012
As of today I have been getting a BSOD on 95% of my start-ups from sleep mode (close lid or press power button - as I setup)I cannot figure this one out, please provide me with some insight.As per forum standards I have included the information below along with the attachments. Windows 7 . . .- x86 (32-bit) or x64 ? WINDOWS 7 HOME PREM OA 64Bit - the original installed OS on the system? YES, Re-installed on SSHD - an OEM or full retail version?Purchased it from retailer- What isthe age of system (hardware) New, just purchased (MSI X460DX) - What is the age of OS installation New, 1 week.
View 3 Replies
View Related
Feb 21, 2012
can i check everything when i run Disk Cleanup?
View 1 Replies
View Related
Nov 1, 2009
How to Open and Use Disk Cleanup in Windows 7 ?
View 0 Replies
View Related
Oct 10, 2011
system:GA-Z68X-UD4-B3G Skill ripjaws 1600 8gbi5 2500KGTS 250Lite-On ihas324Cavia Green 1.5 TBAntec 620c neo ecoAntec 300 caseok, where do I begin.... So my computer went into sleep mode.... its really hit or miss with this computer so when I finally get it back up and running, I will completely disable sleep mode.Sometimes i can click the mouse and it wakes up with no problem, but sometimes it would reboot on its own and just keep trying to boot and restart.... continuous boot loop.... so when i want to remedy this, I just clear the cmos by unplugging the power supply and disconnecting the cmos battery.... it always worked I tried to pull the battery and left it out for 60 minutes.. popped it back in and it won't let me get into bios. None of my keyboards will light up for me to hit delete to get into bios.... not even my PS2 keyboard.... it will just continue to turn on, and show the logo screen telling me to hit various keys for various functions and then it will reboot on its own and it will just continue to do this and will not let me hit a key to get into the BIOS screens
View 20 Replies
View Related
Apr 4, 2012
So I want to perform a disk clean up on my laptop, except I have no idea which items in the list are safe to delete and which are not. I've looked through Google and a lot of sites say it's safe to just delete everything, but I want to make sure.
The following:
Downloaded Program Files - 0 bytes
Temporary Internet Files - 0 bytes
Game Statistics Files - 3.71 KB
Recycling Bin - 0 bytes
Service Pack Backup Files - 920 MB
System error memory dump files - 5.00 MB
[code]....
View 3 Replies
View Related
Jan 17, 2012
I've recently formatted my laptop, maybe a month ago or so and this is the first time i experience such a problem. I click in Disk Cleanup and it simply crashes, I googled around couldn't find anything useful, I tried most of the solutions suggested here: In Windows 7, Disk cleanup stops working on System Files after - Microsoft Answers and nothing.
View 5 Replies
View Related
Apr 5, 2012
I fell asleep with my PC on and woke up with it stuck in sleep mode. I performed a hard shut down via holding down the power button for several seconds. Now the pc will not post and my monitor claims no signal. No beeps from the Mobo speaker. I've replaced my cmos battery so far.Mobo is an asus m3a79-t Deluxe and I've heard some issues of bios not supporting sleep modes?
View 9 Replies
View Related
Nov 18, 2011
The " Files to Delete" on disk cleanup are automatically recreated.? Because I check all and some dont appear anymore and other yes are still there but with 0 bytes.
View 3 Replies
View Related
Jul 2, 2011
I have a two HDD setup with a newer Western Digital Caviar Black 500GB as my secondary drive. It stores all my bigger files such as video games, videos, and so on. Whenever I try to optimize that hard drive using Disk Cleanup or Disk Defragmenter, it doesn't seem to execute the program. The hard drive is running and DC and DD have it on their list but when I use DC it would just come up with 0 mb to clean every time and DD always run a lot faster than the smaller primary drive which is also Western Digital. Is there somewhere in Windows 7 configuration that I need to change to enable the disk to be optimized?
View 4 Replies
View Related
Sep 20, 2012
I know about the immediate 'loss' of disk space owing to the two different methods of measurement. 1Tb to 931Gb - it's annoying, but I'm used to it.No, before a defrag by Fixbee I had 701Gb free, afterwards - in a matter of 2 hours - I had 537Gb. Obviously, I'm not going to use this product again, where a clean-up is obviosly a 'dirt up', but how do I undo the damage that it's caused - especially if it's not the only 'clean up' tool that might do this?
View 6 Replies
View Related
Sep 29, 2010
trouble is, the Repair Disc is useless. All it does is "Load Files", then the hard drive light blinks for what seems like forever, then a mouse cursor on a black screen, and then. well, nothing. I've unplugged everything but the mouse, keyboard and monitor and still nothing. No matter what I do, nothing. Safe mode, recovery, last known good--all do the same thing.The computer boots Ubuntu with no problem, and I can even see the Windows files. (Is that partition supposed to be 'bootable'? It isn't.) Ubuntu tells me there are errors with the $mft whatever that is.
I just don't get it. When I boot from a disc, I expect the machine to boot FROM THE DISC!What is the machine doing for an hour? Every operating system I've ever had could boot from a disk to text mode with a command prompt. All I want to do is fix the mbr or partition table or run chkdsk and see what the problem is. Why won't the repair disk do ANYTHING?I had to replace my motherboard after it burned out, so the discs from the manufacturer are no use. I'll have to buy a new Windows 7 and reinstall
View 8 Replies
View Related
May 15, 2011
This morning I woke up and the first thing I always do is switch on my PC to check email and to have a quick chat with my friend who lives In Australia before it get's late over there. My PC was on, running S.T.A.L.K.E.R: Call of Pripyat via steam at the time, whilst still talking to my friend in Australia. Whilst typing to him, my system locked up mid sentence. I left it for 15 minutes, got Coffee to wake up, still froze.. I had no choice to manually switch it off via the Power Button on the Tower. When I switch the tower back on, I had no Display on the screen. Now, this isn't actually the problem, I've fixed this kind of issue on a friends PC before and knew straight away my Memory Modules had just died. I removed the RAM, switched on, waited for the long Beep to confirm my Mobo was still breathing.. Placed one Module back in, black screen, tried the other etc etc.. Simple fix, get my spare RAM that I saved from an older build, stuck them in, powered up.
At this point I had to fix a corrupt winload.exe (Or similar) likely due to me having to turn the power off manually.. I hit the Recovery Console, let Window's do it stuff, corrupt file repaired, hello desktop..Just to confirm it wasn't a one-off, I Shutdown the system and powered it back on, still successfully reaching Desktop with no issues.Now this is where it gets weird.. I have a room I keep PC spares as well as my Anti-Static mats and junk. I took my PC to this room in order to change my RAM. After I got the PC working.. All I did was put the side panel back on, take my PC back to my desk in my Lounge where it always is and somehow, some way, in the time it took me to move the PC, despite having no power, Windows managed to Corrupt itself... Eh?
To clarify, I fixed my original issue by swapping out the dead RAM, Fixed a Corrupt File and then successfully booted to desktop. I had fixed the problem, but when I moved my PC back to where it lives, it no longer works. I get to "Windows is Starting" and it freezes.(On a side note: The PC was not knocked on the journey from one room to the next and yes I did double check to see if a cable had came loose. I have not added any additional peripherals, the PC is set up in the exact same way it was when I performed the original RAM Swap)
In an attempt to fix this I have so far, from the (F8) Advanced Options. Repair your Computer All I get is the usual black screen with "Windows is loading files..." with the white progress bar. The Progress Bar reaches full, but then nothing happens. It stays on the same screen and never progresses. I gave the process 15 minutes and still nothing..
Launch Startup Repair (Recommended)
Exactly the same as above.
Safe Mode
Gets stuck at ../disk.sys
Safe Mode with Networking
[code]....
View 1 Replies
View Related
Sep 17, 2010
How do you stop laptop from going into hibernation mode / sleep mode?
I run a program that takes 8 hours. I need the laptop to stay awake.
View 1 Replies
View Related
Jan 19, 2012
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
View 8 Replies
View Related
Mar 7, 2011
From time to time Windows 7 will not go to sleep (only the display will turn off). I have searched various forums and tried the following fixes: I have already made sure that network adapters are not allowed to wake up the computer. I typed "POWERCFG -ENERGY" in the command prompt (as administrator) and an energy report was generated, which reported this error: System Availability Requests:System Required Request The service has made a request to prevent the system from automatically entering sleep.
Requesting Service Spooler Opening task manager, I see a process running called "splwow64.exe" -- is this the spooler preventing the computer from sleeping?
View 1 Replies
View Related
Aug 30, 2009
I have Win 7 RC Ultimate 64 bit for a while. Works great. The only problem so far is that it will not stay in "sleep" mode(not the hybernation). It goes there, the light on the box is blinking and after about 10 sec it wakes up. Can't figure out what wakes it up though. I dual boot on the same machine to Vista Home Prem 32 bit and it goes to sleep fine and stays there. So, I don't think it is hardware.
View 7 Replies
View Related
Sep 17, 2011
I have a new Samsung laptop with windows 7. I'm am trying to change the sleep mode when I close the lid. I can't access any of the controls or change anything when I open this screen...(.no attachments allowed)i would post a screenshot but I can't.....what is the secret to getting in there..I have found the correct page but once I'm there I can't access any of the options.
View 8 Replies
View Related
Nov 18, 2012
For the longest time I have had a problem with my custom build Windows 7 machine staying in Sleep Mode. I would set it and a little time forward and the machine would be started again. Today I was reading some additional suggestions. It said it may be a slide show. I don't have any slide shows set up but after some thinking I decided to turn off the Windows Personalization desktop theme that I had on my computer. I chose to have them rotate some beautiful desktop themes every 10 seconds. Once I turned off all but one of the themes, I have not had any additional problems with my computer staying in sleep mode. I like the various desktop background changing but I also like the ability to use sleep mode.
View 1 Replies
View Related
Feb 19, 2012
I have just purchased a Cyber Power Pure Sine Wave UPS and it is working great except for one exception. Whether or not I use the included software, after my computer wakes up from sleep mode, windows cannot communicate with the UPS.
With the included PowerPanel software, the PC still things the device is charging if I cut the power after sleep mode. Without the software, windows reports that the battery is plugged in, not charging.
Since the UPS is connected via USB, I have tried disabling "USB selective suspend" in power options, as well as unchecking "allow windows to put device to sleep" for all USB ports in device manager.
View 2 Replies
View Related
Nov 9, 2010
Every time my dell laptop is in sleep mode for a while - and there is still plenty of battery left it seems to "resume windows" and it's like a startup. Shouldn't it just ask for my password and be there right away?
View 3 Replies
View Related
Mar 21, 2011
does downloading is on in sleep mode windows 7?
View 1 Replies
View Related
Apr 18, 2011
Just built this computer last week and I've had problems when the computer goes to sleep. When I press a key or move the mouse, the computer apparently wakes up but the monitor is still black and the PC speaker is gives off a three beep pattern. After a cold reboot, the system/win7 does not restart, but rather resumes the task I was doing prior to the sleeping mode. One more thing, does cold rebooting affect ssd's the same way as normal hd's?
View 4 Replies
View Related
Apr 9, 2012
Never turn windows 7 off ,however I leave the computer for awhile and return the screen in the sleep mode.Click on mouse , the screen returns but upper right hand corner near time and weather , it says you are disconected . After a few seconds I am connected . Is this normal ?
View 1 Replies
View Related
Feb 9, 2010
How can I keep downloading when windows goes into sleep mode
View 4 Replies
View Related
Sep 17, 2012
It seems that since Win 7 SP1 was loaded my pc will not enter sleep mode. I've done everything the geniuses at Microsoft support suggest and nothing. Turning off hybrid sleep, disabling wake on lan, etc.
View 4 Replies
View Related
Nov 2, 2012
Today I wanted to intsall Windows 8 in dual boot envirnment with Windows 7 so I created a separate 60gb partition for Windows 8 but after the partition was created, all the previous volumes like Windows 7, HP_Recovry and HP_Tools and the newly created Windows 8 partition are now dynamic plus I can't install Window 8 on that dynamic partition. Below is current situation as shown in disk management in Windows 7: [URL]
I don't want to lose my data including the Windows 7, and HP_Recovry and HP_Tools partitions. clean method to go back to basic disk mode from dynamic mode without losing data. When try to convert from dynamic to basic using easeus utility, it gave me following warning: [URL]
View 3 Replies
View Related
Jul 21, 2011
recently my PC has been shutting down, as in a forced shut down, when left, rather than sleeping.i cant find anything in settings that would cause this, has anyone else experienced, and fixed, this issue before? im running 64bit 7 pro.
View 1 Replies
View Related
