Dual Boot Windows XP And Windows 7 Loops In Cannot Repair?
Jul 28, 2011
The pc specs I have are: Amibios, Pentium dual-core,cpu E6600@3.06 GHz,CPU mem 2048mb (dual) speed 3.31GHz. I have no idea how to fix this. The pc crashed in WIN 7 after accepting updates and WIN XP crashed after upgrading to IE 9.This pc is set up to dual boot. However, when the pc tries to boot the screen is black with white text and it has these options: WIN 7/64 bit, WIN 7/32 bit and WIN XP earlier version.No matter which OS I choose, it just loops to windows start-up repair and the results are always windows cannot automatically repair this computer.Safe mode is not accessible and if it starts to load at all, these errors show-KDCOM.DLL corrupt and SPTD.SYS hit enter shows. I thought I had a bootable WIN XP disk, but it is not. Therefore,I cannot try to do repairs that a way.I never got the WIN 7/ 64 bit cd, yet it shows as drive "e". Weekly I check for updates on these utilities and then I run CCleaner, Winclean for the registry part and if necessary Road kill then Malwarebytes all in safe mode when it worked.
Here are a few other things I tried and got results from:
*Memory test= passed
*Safe Mode= never happens no matter what OS I choose
*Last known good config= never works
*loops in start-up repair cannot fix issues-no matter what OS choice is made from the black screen
*never tried to disable auto start-up from black screen because I did not understand this option well or even thought it would be a benefit. Any tips would be appreciated.
View 2 Replies
ADVERTISEMENT
Jun 8, 2011
So, I shutdown my computer this morning and it was installing 96 updates, so I left it and went to school. I came back after 6-7 hours and it was stuck on 68/96 updates installing, I left it for another 30 min and it was still on 68/96. I decided to press the reset button, even though it said please don't unplug or turn off comp while updating. Now whenever I boot up, it says configuring updates 0%, after about 5-10 min it'll just boot to desktop. And whenever I shutdown, it'll do the same process again, installing updates 1/80, I'm not sure if it ever reaches 80/80 but it shuts down. And when I boot up again same deal... I'll actually have not sat infront of it and monitor the numbers, but in the meantime, is there a fix for this? This is shittttty, cuz I just reformatted comp.
View 2 Replies
View Related
Mar 29, 2012
When I try to wake my machine from S3 sleep mode I see the hard drive lights power up but nothing happens, I get a black screen for about 5-6 seconds then my machine proceeds to boot loop itself until i manual shut it down with the power button. Sometimes it will start up regularly with no problems, and about 60-70% of the other times it will do the problem i have explained above.
View 1 Replies
View Related
Dec 3, 2011
She asked me to restore her computer to factory settings. She is not at all tech savvy, so I know for a fact she did not do anything to mess it up. It was running fine, but she just wanted to clean it out and bring it back to like new. She pretty much only uses her computer for school papers and email. I have done factory recovery on many computers at this point and I have never had any problems at all until now.
First thing I did was hook up my external hard drive and saved all of her documents and pictures. I then restarted the computer and pressed F8 and then clicked on repair my computer. It took me to datasafe backup and restore. I went as far as to restore the factory image. I chose not to save any files and to restore it to new again. It completed as normal and I clicked restart.When it restarts, a list of files pops up and then it says "Setup is preparing your computer for first use." It also shows another list of files that seem to be loading as well as it tells me that it is booting in safemode. Next thing it says is that "Setup will continue after restarting your computer". It then continues to restart and perform this boot loop until I turn it off.
I tried to repair the computer and it would fail saying it was offline. So, I plugged the hard drive into an adapter to hook it to my other computer. I opened the disk manager. I saw that the recovery partition was not active like it is on my other hard drives. I also see that for some reason it has a tiny partition that is labeled fat. On my other hard drives it is labeled oem partition. Not sure if this makes a difference or not, but thought it was worth mentioning. Also, when I choose to explore the recovery partition, it says the recovery folder is empty, however the properties say it is nearly full with many files. On my other hard drives I can not access that folder at all. I also am not sure if this matters or not, but didn't want to let anything I am doing go unnoticed.
View 4 Replies
View Related
Oct 25, 2011
I just bought the new components for my PC. They are;
- Asrock H61M-VS mainboard
- Intel i5 2500 CPU
- 2x4GB Transcend 1333
- WD Blue 750 GB HDD
- WD Green 1TB HDD
- Thermaltake TR2 RX 450W PSU
- Palit GT440 1GB
- LG IPS235V monitor
So, this is how it went.
1) I carefully installed all the components, made sure everything is in order, cables, fans, slots...connected the graphics card to monitor via DVI. Turned on the PC just to see if it all works - no signal. Bad start. Plugged out the DVI cable, took the D-Sub cable from the graphics card to monitor. Turned the PC on again - no signal. Then I've plugged the onboard D-Sub to my monitor and - finally some pictures. BIOS (UEFI) utility showed up, I checked the temperatures, saw everything was in order.
2) Then I've set the disk modes to AHCI, corrected the boot order (HDD #1 first, USB DVD second, HDD #2 off), plugged in the USB DVD drive, put the Windows 7 Ultimate disk, and started the installation procedure. Opted for the x64 version, made a 50GB partition just for the Windows, chose all the settings, typed the computer name and adjusted the date & time...then the installation showed "Preparing Your Desktop"...so I kept watching the nice blue background and waited...after 15 seconds, it flashed the desktop with all the icons and then - automatically showed "Logging Off" and "Shutting Down". After few seconds, the PC kept showing POST screen for a second, then nothing...and it looped. It went into some weird restart loop.
3) I repeated the process again, making sure I didn't make any mistakes. Installation got thru, "Preparing Your Desktop"....10 seconds after the glimpse of Windows desktop and the sudden "Logging Off" and "Shutting Down" screens. And the reboot loop again.
Tried to shut off the PC and turn it back on - it just kept rebooting around the POST screen.
4) Unplugged the second memory module and disconnected the backup HDD, leaving the PC with just one 4fGB module and one HDD. Tried the installation again. Same results.
5) Took the old XP SP2 disk, changed the disk modes to IDE, installed the XP SP2. Everything seemed to work normal.
6) Put the graphics card CD and tried to install the drivers, because I didnt want to work with the integrated graphics. NVidia installer alerted me that "there is no such hardware in your configuration". Checked the HW Monitor program, it displayed CPU, HDD and Mobo temps, but not the GPU temps. Checked the Device Manager under Display Adapter - only Intel graphics shown.
7) Took out the graphics card from the PC and tried to install Windows 7 again. Installation went thru and then the regular Preparing Your Desktop / Logging Off / POST screen reset loop.
View 8 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Feb 4, 2011
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies
View Related
Sep 12, 2011
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Aug 8, 2012
Hardware Information (This is from memory and may not be completely accurate):The computer model is emachines The processor is a dual core Intel Pentium The graphics card is NVIDIA (Can't remember the model.)4GB of RAM installed Software Information (Also from memory, but this is likely to be more accurate than the hardware.): Windows 7 Home Premium 64bit Antivirus software is Comodo Internet Security - Also the firewall (product information).I often used Advanced System Care for optimization.-product information.after searching the internet for ways to fix my problem for the past three days, I'm at a complete loss. I was told by a professional that my registry was likely corrupted and that my best bet would be to re-install Windows entirely. I was hoping it wouldn't come to that, but was prepared nonetheless.So I inserted the installation disk, and wouldn't you know it, the installer wouldn't recognize my hard drive (BIOS recognizes it though). Searching for reasons why this was happening only turned up people saying to make sure it was recognized by BIOS, which I considered a no brainier. When it still didn't work for people in certain threads, they were told to try wiping their hard drives. I've done it. Windows still doesn't want to notice my hard drive.After that, I decided to try and install Windows to an external hard drive. I know this isn't how Windows was designed, and I knew it wasn't how Windows was meant to be used, but I was (to my knowledge) out of other options (Also, the external hard drive has 1 TB of space on it, so I wasn't concerned about speed loss). So, I searched for ways to do that, and I came across PWboot. The first half of the installation worked, the second half did not. I began getting an error that read (bootmgr is missing press ctrlalt+delete to reboot.) Which I did. But that didn't fix anything. So I tried the entire process again, and it didn't work.The "Repair your computer" feature in the windows install disk turned up nothing as well. I can't "Factory Reset" because it can't detect any installation of windows, the startup repair function can't "repair this computer automatically", and none of the other options will even open (with the exception of the command prompt, but most of the commands aren't valid for some reason.)
View 9 Replies
View Related
Sep 9, 2012
Over last week i had problem in my Windows7 to boot I get Over than 20minute to boot (Repair/Formate Or normal boot or in CD)despite my config :
Os : Windows Xp
CPU : Core2Duo e4600
Gpu : Nvidia Ge Force 9500GT
Ram : 2go
View 9 Replies
View Related
Oct 14, 2009
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies
View Related
Aug 8, 2012
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies
View Related
Apr 6, 2012
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies
View Related
Dec 3, 2010
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies
View Related
Mar 11, 2009
How to Change the OS Name in Windows Boot Manager ?
View 0 Replies
View Related
Sep 19, 2012
Recently my laptop which is an Asus N53S, is not been able to boot windows 7. When I try and do a start up repair, it is unable to repair. Then, I also made a windows 7 system repair disc, it ran fine but it was unable to fix my problem as well. I tried to hook up a printer to my laptop but did not succeed cause I had no internet or driver discs to install at the time. Also, I install a program called desa? for downloading blackmesa source.
View 5 Replies
View Related
Aug 6, 2012
I have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies
View Related
Feb 17, 2009
I got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.
View 9 Replies
View Related
Nov 9, 2012
I have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
View 4 Replies
View Related
Mar 10, 2012
I had Win XP on 1 HDD & installed Win 7 on a different HDD. I think I accidentally did a dual boot install because Win 7 won't boot without the the XP disk connected to the motherboard.
That was fine until my XP drive died yesterday. Now Win 7 won't boot. The first time I tried to repair, Win 7 was not even seen. so I booted into diskpart and made the partition active. Now it could be seen as an OS.
Then I did a startup repair. It did whatever it does & when it was finished I restarted the pc but it didn't boot I went back to diskpart and confirmed the partition was active. I went back startup repair and tried again.
This time it said it could not detect a problem, but it still will not boot. What else can I do? My pc is homebuilt. Right now I have the 1 sata drive, 2.53 ghz cpu, 4gb ram, onboard video & sound
View 5 Replies
View Related
Aug 3, 2011
I've installed Windows 7 alongside Ubuntu and was using grub2 bootloader, after changing my graphics card and moving removing some old hard disks when I try to boot the Windows partition I get the blinking underscore screen indefinitely.I tried recovery from the DVD, the Windows install is not recognised in the list, it's just empty, clicking load drivers I can navigate to the drive - it's there as D:, I can see the Windows directory and files, the C drive is another NTFS partition without a Windows install. As it doesn't recognise the install, startup recovery doesn't work.I then tried bootrec and bcdedit from the command line, eventually I hit a wall with an error that there is no recognised file system - despite it being available in the Load Drivers dialog earlier.
View 2 Replies
View Related
Jun 4, 2012
I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies
View Related
Jan 15, 2013
I just created a system repair disc by clicking "Create a system repair disc" on my computer. The disc was successfully created, then I went to boot it up in VirtualBox and I get a Toshiba error: F3-F100-0003. How could this be? I don't think VirtualBox or the repair disc would have anything to do with Toshiba. I created this disc with a factory preinstallation of Windows 7 on a Toshiba laptop. Did Toshiba put a custom disc image on the computer which will be burned to the disc? Does VirtualBox use the host computers BIOS? (maybe not possible because there was a Windows 7 cursor in front of the error box) Does Microsoft use Toshiba technology in their repair discs?
View 3 Replies
View Related
Mar 16, 2011
So yesterday I added another hard drive to my computer. I now have 2 SATA hard drives running in my machine. I used the disk managment, and the 2nd hard drive is working as it should.
However, when I shut down my computer and turned it back on, Windows will boot to the Startup Repair screen every time. I checked the BIOS and made sure the boot order was correct, and even took the 2nd hard drive off the boot order in order to make sure it wasn't causing any issues. It's pretty annoying, because every time I start up, I have to wait for the whole repair process before it will load normally. Each time it always says that there are no repairs that could be made.
I also am not able to put my computer in sleep mode any longer. I believe my BIOS setting is set to S1, and before I never had any problems. I would put my comp to sleep and everything would be fine. After the 2nd hard drive, my monitor will turn off and it sounds like 1 of the hard drives turns off, but the CPU and fan are still running and it does not completely go to sleep.
View 4 Replies
View Related
Oct 21, 2012
I've got two hard drives with Windows 7 on it. One of them, the operating system crashed entirely, on the other, it's a perfect copy of how the other hard drive was at factory settings (drivers and all). Now, you're probably wondering, hey, why not use the other hard drive? Thing is, I'm trying to save / keep all the programs on the first hard drive in order to save myself the hassle from 1) pretending I'll find / looking for the disks that I know I don't have and 2) the time it'd take to install them.the machine was *not* giving me anything except sending me over to start up repair, stating that it couldn't fix the problem. I used the other hard drive to boot into Windows, and was hoping to do a repair option on the other hard drive. Unfortunately, I don't think that's entirely possible. I used Hirens Boot CD to check out the System32 / Syswow64 folders, and there was hardly anything in there. So, naturally, started copying off certain sub folders from one to the other. Now, I can get it to attempt to boot / it sees the partition / I go to safe mode, and it hits Classpnp.sys for a split second, then startup repair. Startup repair let's me see that there is one root cause, but, after doing its thing, says that it didn't detect an issue with the startup.
1x Sony Vaio laptop 2x Hard drives (one with a factory restored image on it, another one that won't boot into the OS)The hard drive that I need to boot from / one that has my programs goes to Startup Repair after hitting Classpnp.sys in Safe Mode Startup repair has one thing fail (StartupRepairOffline issue), but says it didn't detect a problem / everything booted fine afterwards Attempted to rebuild the BCD (after successful fixmbr / fixboot), but it states it sees 0 installations of windows. However, I have a Windows 7 retail disk that sees the installation folder.
View 4 Replies
View Related
Jun 24, 2011
After installing windows 7 update plus one optional hardware update 2 days ago, windows wont start, repair itself, or safe boot. What should I do?
View 4 Replies
View Related
Jul 21, 2012
I have searched on this forum and Google to see if others are having the same issue. After updating Windows last week, my computer has been in a consistent state of decline. Today, I powered the CPU down and it will not start-up again. I have attempted to use the windows repair disc, but am now told that startup repair cannot fix my problem.
View 4 Replies
View Related
Aug 1, 2012
sony vaio PCG-71314L
on turning on, hangs at "windows is starting" for ever
F10 says "disc read error"
F8 says "no operating system found"
booting/repairing/reinstalling from CD hangs at "windows is loading" for ever
how could i get it to boot/repaired/reinstalled?losing all data on HDD is fine, just need to make it work again.
View 9 Replies
View Related
Oct 9, 2012
I was working on my computer when windows locked up and I was forced into a hard shut down, when I restarted the computer one of my hard drives showed up as invalid and my computer would not recognize it. When I tried to repair the sector to make it valid the it seemed to work, now my computer will not boot into windows at all. I have an SSD HDD set up and I need this computer as it is my main audio work station.
View 3 Replies
View Related
Jun 14, 2011
My friend has had this laptop for the past year or so, March 2010; and just recently her laptop decided to stop booting. Every time I try to boot windows it gives me a BSOD. All I have is the boot/repair disk from 2010; however it isn't working properly when I try to repair the OS or boot from the disk. It's a toshiba and it came with a repair program, but it also removes data on the HDD. Is there a link to a proper boot disk that I can maybe download to a flash drive and boot from there and repair? Or is there at least an easy way to pull the information off of her HDD before using the Toshiba program? Is it possible to just plug in the laptop to my computer, turn it on and access it from my personal computer? I also have an OEM version of Windows 7 from when I built my own computer, can I use that to repair her OS or will it recognize that it's not the same computer and fail? I know, lots of questions, you don't have to answer them in sequence, just tell me what would work best .
Note: She does NOT have a restore point on her laptop, I was able to get that far on my own before I decided to ask on this forum.
View 4 Replies
View Related
