Razer Naga Does Not Work After Sleep Mode
Jan 28, 2012
So I purchased a Razer Naga because I loved the idea of 12 buttons right on the side for my thumb and since I work at home and pretty much just sleep, eat, and work around this computer I only put it on Sleep Mode. But when I moved my mouse around the next day it wouldn't start up. So I unplugged it and took it back got another one. Same problem occurred. Check to see if it would wake the computer from standby and it was checked. So then I moved on to updating the Firmware. Problem still occurred. So I'm wondering is this Razer's fault or perhaps my Motherboard not being power up enough? I do have a 5 year old power supply on my high end computer that's 550 watts due to my 1000 watt dying.
View 3 Replies
ADVERTISEMENT
Sep 16, 2012
I recently just bought a Razer Naga 2012 for my comp. Should I have gotten the death adder instead? I play bf3, mw3, skyrim, gta iv, cod4, minecraft, sniper elite v2, and more Or do you think I went well with the Naga because of the extra buttons and possibilities?
View 3 Replies
View Related
Sep 8, 2010
I've bough a Dell Inspiron 1564 with Windows 7 home premium x64 last month and everything was fine until a few days ago, when sleep mode stopped working. When I close my lid and open it up after some time there are 2 things that might happen:
1. The screen is just black, all the buttons are lit, I hear the fan, but no reaction at all. So I just forcibly turn off and turn it on again.
2. After opening the lid, nothing happens, when I try to turn it on, it loads up, but informs me that windows has not shut down properly last time (or something like that).
View 1 Replies
View Related
Mar 2, 2010
I had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time I wake up my computer, the ipv6 cannot work. The appearance is that I can't ping and access ipv6 website. But after some research, I realize that only the DNS part is broken. When I ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if I use nslookup, I can find the ipv6 address. And the following are my tries:
ping ipv6.google.com -- not work
ping 2a00:1450:8001::68 -- does work, the ip is the ipv6.google.com address
ping -6 ipv6.google.com -- does work like the above
View 2 Replies
View Related
Oct 30, 2011
I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
View 2 Replies
View Related
Jun 3, 2012
I have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
View 2 Replies
View Related
Aug 6, 2009
my razer mouse button 5 (side button) don't work on win 7... i installed the razer driver (1.00) ... any idea ?
EDIT : NVM , i was in WINDOWS UPDATE , then there was a facilitative update for the razer mice, now all work fine
View 6 Replies
View Related
Oct 27, 2009
I wonder if anyone knows if DeathAdder and Tarantula going to function if I install Windows7 64bit?
View 5 Replies
View Related
Sep 17, 2010
How do you stop laptop from going into hibernation mode / sleep mode?
I run a program that takes 8 hours. I need the laptop to stay awake.
View 1 Replies
View Related
Jan 19, 2012
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
View 8 Replies
View Related
Nov 25, 2012
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
View 3 Replies
View Related
Nov 29, 2011
power off and unseat the video card, re-seat it, and power back up...
Windows 7 pro Intel Core i7 870 Processor ATI FirePro V4800 Motherboard GA-P55A-UD3Without doing the above steps, just get black video screen
Would this be a software issue, problem with motherboard or video card?
View 3 Replies
View Related
May 24, 2012
I bought a new notebook running windows 7 64 bit a couple of months ago After running a full system scan with Kaspersky anti-virus a couple of days ago I now have a bug with sleep mode - After going into sleep mode, the user with my picture icon is locked meaning that I can't enter my password to log back in - the password box doesn't show.With the ASUS face recognition scanner I'm logged back in, but everything is 'buggy' e.g. if I click on the start button and hover over that entire area it goes into sleep again, or if i click on the bookmarks on chrome it doesn't show them, instead it click on an actual site within the bookmarks.After going into sleep the only way to enter and return to a normal state is to click the 'switch user' whereupon, my user picture icon reverts with the password boxI have tried a system restore but this didn't work.
View 1 Replies
View Related
Oct 7, 2012
Since a few days my PC developed an unusual behaviour: it goes to sleep mode at random intervals ! sometimes it does that at windows start up for several times...
I had microsoft security essential installed and read on some forums that it could be the reason for this problem: I unistalled that. Then I run online scanned from ESET nd Bitdefender: all clean.
Then I installed avas free edition (as I was without any anti-virus software). Did a complete system scan with no problem. I messed up with the power consumpion settings with no results.
The only solution I could find was to use the software "Dontsleep.exe" which I found googling around: it works ! I looked up all the running services and application at windows sturtup and disabled a lot of them with no results.
View 2 Replies
View Related
Dec 28, 2012
So this might be the wrong place for this thread but I didnt see a computer specific section so i picked this just incase it is related to my windows. Anyway the problem i am having is that every so often, more often then not actually, when my computer hibernates from inactivity, it cannot be woken up. I click the mouse, press everything on the keyboard and nothing will happen. I even try pressing the power button yet that does nothing. The power button just keeps blinking as normal when in sleep mode. I also tried Holding down the power button, in hope to force shutdown the computer but that did not work either. The only way anything happens is if i unplug the computer and then plug it back in. Unfortunately i know thats really bad for the computer but i dont really have a choice.[CODE]In addition, i have restored my computer to factory defaults, aswell as installed all the latest drivers
View 4 Replies
View Related
Jun 3, 2012
After putting my computer to sleep, upon waking I receive an error code, which should be present in the dump file. I closed the error window before copy pasting it in here. I will update the post with the error information next time it happens. This only happens when putting my computer to sleep. Hibernate and shutdown do not have this problem, and I have not received any BSOD's during use. This has been happening for about 10 days. My memory set up is kind of strange. I have 2x1GB 1.8V ram and 2x2GB 2.1V ram, both DDR2, and both running at 2.0V. I didn't want to overvolt the 1.8V ones too much. The timings are slightly loosened on the 2.1V ram to match those of the 1.8V ram. I have run Memtest86 with no errors. My hard drives have also checked out fine.I have my q6600 overclocked to 3.0GHz, with a voltage increase, CPU-Z is saying it is running at 1.408V. I have run plenty of Prime95 tests. No stability problems, and temperatures are always acceptable. I have had it at this overclock for 7 months, ran at stock the previous 4-5 years. My GTX 460 is overclocked as well, always has been stable as well, with temperatures plenty low enough.
View 1 Replies
View Related
Jun 21, 2012
Ive been having a blue screen of death after reawakening my computer from sleep mode.It does not always happen but it happened 3 times already.I'm using windows 7 professional 64 bit full retail version
View 4 Replies
View Related
Sep 25, 2012
My pc is shutting down more and more frequently so that it now happens every time I close the lid for sleep mode. In Event Viewer there are numerous "Event 41, Kernel Power" warnings.
View 2 Replies
View Related
Jul 17, 2009
I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP. To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password. I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.
View 9 Replies
View Related
Sep 3, 2010
I am using window 7 and when my computer goes into the sleep mode sometimes the mouse will not be available to select the programs. I have turn off the power and when comes back on it is ok. Why does computer function properly when you try to use it after it goes into the sleep mode!
View 3 Replies
View Related
Sep 21, 2010
I am not savvy in this kind of stuff. My husband has a home built computer that runs our tv system with windows media center. He had to leave on a military deployment and right before he left he had to reinstall the OS. Since then the computer refuses to wake from sleep mode. I have to scram it to get it to come back up. Since we run the media center it ought to wake up to record automatically, but it isn't doing that either. I've checked all the power options but that doesn't seem to be the problem. Although, at this point, I really have no clue.
View 8 Replies
View Related
Nov 24, 2010
Is it normal that when my computer is in sleep mode that my cooling fans are running? They are always running.
View 2 Replies
View Related
Mar 7, 2011
From time to time Windows 7 will not go to sleep (only the display will turn off). I have searched various forums and tried the following fixes: I have already made sure that network adapters are not allowed to wake up the computer. I typed "POWERCFG -ENERGY" in the command prompt (as administrator) and an energy report was generated, which reported this error: System Availability Requests:System Required Request The service has made a request to prevent the system from automatically entering sleep.
Requesting Service Spooler Opening task manager, I see a process running called "splwow64.exe" -- is this the spooler preventing the computer from sleeping?
View 1 Replies
View Related
Jul 9, 2009
To prevent my computer from going out of sleep mode by itself I have to unplug my ethernet cable, that's 1 problem but I don't really care.
The other problem is when I come out of sleep mode, my DVD player opens by itself, I close it, and it reopens.
View 9 Replies
View Related
Jul 22, 2009
Windows 7 is freezing in sleep mode now... I don't think it's my drivers or anything because 2 updates earlier it worked fine. I'm wondering if anyone knows if this is an RC problem, or if something is wrong with my computer. I hope not since this computer is only 2 week old... There is like nothing on it and everything downloaded has been from a disk so no viruses (well except kasperky anti-virus but I HOPE that would be clean lol).
Basically when I put it into sleep manually, I cannot get it out, and my power/reset buttons do not work, I actually need to turn off the electricity.
Oh, and it's not my screen considering I CAN turn my screen on but it goes right back into powersave mode (sleep mode). I DID force it out once, and it said no signal from the computer even though the computer is on. This leads me to believe it is the OS (or god forbid one of my parts).
I just realized something... I have on HD connected via sata cable, but I took the power away from it (I wanted to hear something). I mean is that the possible cause? I doubt it though since it's not registered as an HD due to having no power... And my sound card light is on, so I'm assuming that is still on when I put the computer in powersave mode... Maybe that's an issue?
View 9 Replies
View Related
Aug 11, 2009
I am still having bug and freeze problems on all of the computers that I have been testing on since the first release in November.
I am currently testing both x64 and x86 versions on 4 of my PC's and still having minor bug issues, and the major freeze problem.
I do not Just use my PC's for e-mails, browsing the web and gaming. I primarily use them for Engineering Design Work and they need lots of resources to operate efficiently. My primary Base unit is the one I do most of my work on and the Most efficient Operating system on it is Windows XP x64 (sp2) and customized. (Not the Basic install of services and registry sets).
The freeze issue is random and it happens when my PC's go into sleep mode. Some times the will wake up normally, but way to often they will not wake at all, I have to force re-boot. And no error logs related to sleep mode issues, only the E-ID 41 (forced re-boot). This has happened on all the releases from 7000 to 7127, and now 7600, the releases from 7137 to 7229 never had this problem. And this has happened on all my test PC's including Laptops and Desktops.
I have tried many changes in settings for Power Settings (Advanced), Network Adapter Settings, Monitor settings.
Ideally I want my Network Adapter to stay Active on my main box so I can access files from my other computers any time I need them, I want my HDD's to go to sleep when not in use so they will live for a while. and My Monitors to shut down when not in use.
View 9 Replies
View Related
Jun 29, 2012
When system goes to sleep longer than a hour and you wake it up the bottom third of the screen freezing. The top 2/3's get split like window pane a when you scroll the top 2/s's will scroll but the bottom 1/3 will remain as it was before sleep. Also the bottom third wont have any hover icon effects though icon will still work, the task work as intended. If I restart the programs the will work fine but windows has to restart for icon hover effects to work.
View 2 Replies
View Related
Jul 14, 2012
if i am going to leave for about 1-2hours, should i put the computer to sleep mode or simply shut it down?
I was told that sleep mode warms up the computer also. So its not good to go sleep mode. Isit true?
View 9 Replies
View Related
Nov 14, 2012
When I try to put my computer to sleep, the screen goes into sleep mode, yet literally nothing happens with my tower. Then after a second or two, the monitor wakes back up and shows the login screen. I've tried checking powercfg /requests and -lastwake, and requests shows "None." across all topics, and lastwake says Wake History Count - 0.
View 1 Replies
View Related
Jul 14, 2010
I just built a mini ITX HTPC in a silverstone sg06 case (Zotac H55 ITX MOBO, 4GB DDR3 Ram, 32GB SSD, and intel i3 built in intel HD graphics)All works fine and I am very happy with it. I am using XBMC for my media program and I have the Logitech Dinovo Mini Wireless keyboard.. I use the SLEEP button when I am done watching a movie and when I want to watch a movie "lets say in a few days" I quickly press any button and instantly I am in XBMC again with my movies list.Does it use alot of power? IS it dangerous to leave pc on stancby overnight..? Is it harmfull for the hardware.?I have been reading mixed reviews.
View 8 Replies
View Related
Jul 24, 2010
First the system specs:
Intel DX48BT2 motherboard
Intel QX9770 3.2 GHz Core 2 Extreme
Nvidia GTX 295
8GB of OCZ 1333MHz DDR3 Gold Series RAM
30GB OCZ Vertex SSD
1TB Samsung HD103UJ HDD
Windows 7 SP1 Public Beta
For two nights in a row whenever I have put my computer to sleep before I go to bed it has not been able to exit sleep mode the following morning. The screens get no signal even the the computer is on. I should note that I have hibernation disabled on this computer due to the fact that the SSD boot drive is so small and an 8GB hibernation file would be too large. Instead I enter standby. I should note that last night as I was entering sleep mode I accidentally hit a key which caused it to come right back out of sleep mode before the fans had turned off.
View 7 Replies
View Related
