my razer mouse button 5 (side button) don't work on win 7... i installed the razer driver (1.00) ... any idea ?
EDIT : NVM , i was in WINDOWS UPDATE , then there was a facilitative update for the razer mice, now all work fine
I own an older Razer Diamondback mouse back from my 2005 build. It has always behaved a little strangely in that it would sometimes not power on when the computer boots up, forcing me to replug it into its USB slot. This behavior persisted through my May 2010 build. Just the other day, however, I noticed that I got a BSOD after replugging the mouse. The culprit was razerlow.sys, a reference to a Razer Diamondback driver. And just this morning, it happened again. (I am including the full error below.)I have not updated my Diamondback driver before this BSOD occurred. Since the BSOD, I uninstalled the driver/software and installed the latest driver from May of this year, but this BSOD occurred again this morning after this update. The only other times I've experienced BSODs are with ATI drivers 10.5-10.11 (I've been on 10.4 until this year), so maybe my recent update to 11.6 has something to do with this? I have made no changes to my hardware, drivers (except ATI), etc. between the last replugging that did not cause a BSOD and the one that did.This error only happens when replugging the mouse when it doesn't boot up. If the mouse boots up and I replug it, the error does not occur. I also just switched USB slots and for whatever reason a Windows pop-up stated that the device is being installed, when it must have been installed the whole time.
Windows 7 64-bit
Asus P7P-55D-E LX
i5-750 @ 3.8 GHz
XFX Radeon 5870
ERROR:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump�62811-29983-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code].....
When I hit the back button (no matter how many times), nothing happens. Now, I understand that this can happen on some pages, but this is EVERY PAGE. Sometimes if I refresh the page and then hit the back button it will work, but not always. Since it does it on every page, it's obviously not website-related, so what is it?
View 4 Replies View Relatedbefore some months i made two partitions on my hard drive to install ubuntu 10.10 and installed it sucessfull the dual-boot thing worked very well also BUT yesterday i decided to unistall it so i formatted the two partitions where i had ubuntu and then using EasyBCD i reinstalled the windows vista/7 boot loader and worked well until today where i wanted to enter the advanced boot menu using the F8 button but it didnt work i tryed several times but with no luck before the installation of ubuntu i was able to accses the menu but now i cant
View 9 Replies View RelatedSo I purchased a Razer Naga because I loved the idea of 12 buttons right on the side for my thumb and since I work at home and pretty much just sleep, eat, and work around this computer I only put it on Sleep Mode. But when I moved my mouse around the next day it wouldn't start up. So I unplugged it and took it back got another one. Same problem occurred. Check to see if it would wake the computer from standby and it was checked. So then I moved on to updating the Firmware. Problem still occurred. So I'm wondering is this Razer's fault or perhaps my Motherboard not being power up enough? I do have a 5 year old power supply on my high end computer that's 550 watts due to my 1000 watt dying.
View 3 Replies View RelatedI wonder if anyone knows if DeathAdder and Tarantula going to function if I install Windows7 64bit?
View 5 Replies View RelatedWhen I mouse over the taskbar buttons, the glow doesn't go away after I move the mouse away. This doesn't happen all the time, but seems to always pop up eventually on every boot, and persists until I restart.It's done this across several gpu driver updates, so it must be something with Windows 7.
View 9 Replies View RelatedI recently bought a new laptop and I installed Office 2007 on it (it had already been installed on other computers before). However, pressing Shift + Tab in Word doesn't decrease indent (It does so on PowerPoint). This does so on my other computers, and I assumed it was a default function in Word 2007. I tried to customize the keyboard shortcut for it, but Word wouldn't accept Tab as a suitable shortcut key (instead of registering Tab as part of the shortcut key combination, it performed the normal Tab function and went to the next gui object). Is there any way to fix this? I can live with it, since all I have to do is make a shortcut without Tab, or just simply click the respective buttons, but the Shift + Tab shortcut is ingrained in my memory and will be hard to unlearn, especially since any other computer I use with Word will use the default shortcut.
View 5 Replies View Relatedmy laptop TOSHIBA Windows7 start menu stop working.
View 2 Replies View RelatedYou search google, click on a result, and then either backspace or click the back button, but instead of going back to google, you stay on the current site. Why does that happen, and is there anything to do about it?Using IE 8 32-bit in Windows 7 64-bit here, but have been seeing this problem for a long time with previous versions.
View 4 Replies View RelatedI just bought a Gateway computer yesterday with Windows 7 preinstalled on it, and last night I tried to wake it from sleep but when I did, it didn't show the taskbar, icons or start button. All I could see was the background. I tried the "ctrl+shift+esc" method to fix it, but when I hit those keys nothing happened. I'm at a loss, and I don't want to return the computer!
View 3 Replies View RelatedMy mouse left button sometime work fine sometime not work. I need to know its a hardware issue or drivers issue. So are there any way to test it? Sometime i have to give more pressure to left click.
View 2 Replies View RelatedAfter installing Windows7 Ultimate x64 on a EEE PC Asus 1215B Seashell serie, the button which toggle wifi did not work anymore, like any other keyboard function keys (less importante now). When I log on I receive a message in a popup windows which says: You must install ATK0100 driver! I had installed the P4GX before noticed the problem. I've tried to install the driver downloaded from asus support site but I receive an error message in a pop-up windows, without any clue about what the problem is. Nothing is registered in Device manager, nothing is found in Registry, no file related to atk* in system32driverstorefilerepository. It's not possible remove nor reinstall, cause nothing bad remains after my failed installations. I've tried many times, with Troubleshoot Compatibility and Run as administrator (my regular user is also an admin). After executing the driver app, one command prompt appears showing the log of the installation process, and all of sudden disappear. No control about it. It's only possible to read the upper case word FAILURE before the window close. No log is found. It works when I restore the machine to Windows 7 Starter that comes from factory. I dont know how to get the drivers inside the hidden partition.
View 9 Replies View Relatedwhy fn button does not work with fn8 operates wireless laptop Toshiba satellite l500
View 1 Replies View RelatedThe other day i had a friend delete some programs from my Asus laptop on startup and running processes to make my computer boot up faster. I think we did something that makes the fn key not work anymore. how to restore this functionality?
View 1 Replies View RelatedI have bought a HP 6730b notebook (type: HP KU216ET), it has got built-in luetooth. I have installed 32bit Windows 7, but the bluetooth doesn't work. I cannot find any driver to make that working good.. HP Compaq 6730b Notebook PC*-* Download drivers and software - HP Business Support Center - here is a driver for XP, but when I install, it said that I have to turn on Bluetooth... I don't know what to do.I don't know what's the type of the built-in Bluetooth, maybe broadcom, I tried this driver: Broadcom.com - Bluetooth Software Download
View 4 Replies View RelatedI turned of my touch pad using 'FN+F9' and now my 'FN' key is spoilt. Is there away to turn it back on without the 'FN' key?
View 3 Replies View RelatedDoes anybody know of an alternative to macdrive in order to see a hfs+ formatted hard drive?
View 7 Replies View Relatedi installed windows 7, and everything seemed to work fine.
installed a bunch of programs, they also all seem to work.
but then i decided to do some backups; i created the rescue cd using windows, and then cloned the hard drive also using windows 7.
but then i noticed the backup program, and decided to click on "set up backup"; nothing happens.
if i try the same from a disk drive/properties (ie click on backup there) nothing happens either.
any ideas? maybe something i installed broke this, but it seems like a pretty basic function to break like this.
Recently, I did a clean install of Windows 7 Home Premium on my MSI GE600. At first, the touchpad behaved the way it should. But now, it is not even detected. I rebooted the laptop and it worked again. Most of the time it doesn�t work though.
I have installed the Elantech driver of the MSI site
Basically, I bought a new USB stick and plugged it in. My computer would search for windows updates, but it would never find the ones required, and the USB wouldn't install. When I unplug the USB and plug it back in again, the computer doesn't even recognize it, and nothing happens. Currently, my computer is not updated, so that's one thing I won't try. I've installed windows 7 updates numerous times in the past, and every time I did, my computer would have problems starting up (i.e. my desktop would be a black screen when it starts and I can't do anything, or the place where I enter my password to log in doesn't load at all).
View 6 Replies View RelatedSo after installing win 7 ultimate x64, 5.1 surround stopped working and now i can only use my 2 front speakers + sub. In test all speakers don't work aswell.
View 3 Replies View RelatedI'm unable to play games requiring DirectX 11, even though I've downloaded it perhaps half a dozen times. Having stumped myself I decided I may as well ask here. The only feedback I've received from things not working is Civilization V says "Requires Service Pack 2 or greater" As far as I know DirectX doesn't update in the Service pack format, and that Windows 7 SP2 doesn't exist yet, and shouldn't be needed for a game of early 2010 as-is. I have an ASUS U56E, with the on-board i5 graphics(I thought it might be that, but my brother's i3 runs said DirectX fine, so maybe mine is damaged) and I, quite frankly, do not want to run it back into Best Buy and hope that it's covered by warranty.
View 4 Replies View Relatedi have already replaced drivers. tried some stuff in the registry and have no access to my dvd/rw drive i have windows 7 internet explorer 8.0 and dell studio 1458. already ran chkdsk
View 1 Replies View Relatedmy computer does not show anything eventhough of connencting the USB or pen drive..what to do ??
View 2 Replies View Relatedthe fan doesnt spin
View 2 Replies View RelatedMy system sound doesn't work anymore I have windows 7 and i was talking on Skype that my call failed and then no more sound.... I check sound part in the control panel but it said no sound devices is installed. what should I do?
View 3 Replies View RelatedI've just downloaded the iCal software, and I get a message telling me that it wont wok on a 64 bit machine.
View 1 Replies View RelatedWindows 7 (new computer) I'm trying to transfer folders from Outlook Express to Thunderbird. Found out that if I first transfer them to Windows Live Mail then to Thunderbird it would be easier. I saved the Outlook Express Folder from my old computer, which is long gone, to a travel drive. Now I'm trying to import them to WLM, but it won't do it. I found out I need to uncheck "read" under properties. I've tried and tried that, but every time it reverts right back to having it checked.
View 11 Replies View RelatedI have an newer HP Netbook running Windows 7. I recently installed Open Office 3.3 on the machine, and it works fine, except for some key sequences. For example, in the OO Writer, the key sequence Ctrl-Home should move the cursor to the top of the doc. This works fine on my older HP XP Pro laptop, but my netbook ignores or doesn't understand it. I have removed OO and reinstalled it, but the problem still occurs. So, I guess I need to figure out if this is a Windows or Open Office issue.
View 3 Replies View RelatedI had to buy laptop because my desktop with winxp died. Now how do I get the scanner to work with win7? I need to scan medical records. The scanner is a Canon Lide 55.
Tech Support Guy System Info Utility version 1.0.0.1win7, scanner
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1844 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 260242 MB, Free - 222580 MB; D: Total - 29690 MB, Free - 28507 MB;
Motherboard: LENOVO, MoutCook, Not Applicable, WB01561071
Antivirus: avast! Antivirus, Updated and Enabled