Recently, I did a clean install of Windows 7 Home Premium on my MSI GE600. At first, the touchpad behaved the way it should. But now, it is not even detected. I rebooted the laptop and it worked again. Most of the time it doesn�t work though.
I have installed the Elantech driver of the MSI site
I turned of my touch pad using 'FN+F9' and now my 'FN' key is spoilt. Is there away to turn it back on without the 'FN' key?
View 3 Replies View RelatedI have a DELL XPS M1530 laptop that I just installed a full version of Windows 7. It had Windows Vista on it before. It is a replacement computer for my old DELL (same model) that was having issues.I usually hook up a bluetooth mouse when I use my computer, but I just noticed last night when I was using the touchpad instead, is that it does not scroll up and down, or left to right. The mouse part of the touchpad works fine, as does the left and right buttons.
View 9 Replies View RelatedI hav an Asus netbook with windows 7 premier. My touchpad was on so I pressed the usual; F3..but it didn't disable it. I was pissin around in the settings.I think I disabled the driver?? That's the message that comes up. It needs a driver..i tried to disable the touchpad and I don't kno how to fix it.
View 1 Replies View Relatedi have a acer 5515 and i cannot get the touchpad to work , it worked sometime ago but now i cannot get it to respond , because of this i changed the os from vista to win 7 but it did not resolve the problem.I already tried Fn + F7 and got no response.
View 8 Replies View RelatedI cant make my touchpad work. I downloaded off the synaptics web site for x64 drivers and it still doesn't work. Am i doomed to not have my touchpad work?
View 2 Replies View RelatedI downloaded windos 7 enterprise. My touchpad does not work even after downloading synaptics web site driver x64 update. what do i do?
Am i doomed to use a mouse only?
A couple days ago, my keyboard and touchpad mouse stopped working. I thought it was a hardware issue and ordered a replacement keyboard. As for the touchpad, I'm just using a wireless mouse. I replaced the keyboard a couple days later with the new one, and when I turned on my laptop, it works again, but when I put my laptop to sleep and wake it up, I hit enter, and then it stops working. I cannot type anything until I restart my computer. I figured it has to do something with the drivers, but I'm not too sure. Here is my computer specs:
Product: HP Pavilion dv9700
Model: dv9925nr
Windows 7 home premium 64bit
I've gone to the HP website to get the drivers, but they do not support windows 7 for my computer.
Occasionally, my laptop's touchpad won't work on start-up. This does not happen all the time, it appears to happen every other boot. I can plug a USB mouse at any moment and have that work fine. This also only happens on Windows 7 from what I can tell, as I dual-boot with Ubuntu and Ubuntu has never given me this problem before. I can also use safe mode with Windows 7 and have the touchpad function fine all the time.
View 3 Replies View RelatedI have a HP Entertainment PC laptop. It's Windows 7 (upgraded from Windows Vista). When I tap on the touchpad, it won't work as a click. It's so annoying that I have to use the button below the touchpad to click.
View 1 Replies View RelatedThe other day i had a friend delete some programs from my Asus laptop on startup and running processes to make my computer boot up faster. I think we did something that makes the fn key not work anymore. how to restore this functionality?
View 1 Replies View RelatedI have bought a HP 6730b notebook (type: HP KU216ET), it has got built-in luetooth. I have installed 32bit Windows 7, but the bluetooth doesn't work. I cannot find any driver to make that working good.. HP Compaq 6730b Notebook PC*-* Download drivers and software - HP Business Support Center - here is a driver for XP, but when I install, it said that I have to turn on Bluetooth... I don't know what to do.I don't know what's the type of the built-in Bluetooth, maybe broadcom, I tried this driver: Broadcom.com - Bluetooth Software Download
View 4 Replies View RelatedDoes anybody know of an alternative to macdrive in order to see a hfs+ formatted hard drive?
View 7 Replies View Relatedi installed windows 7, and everything seemed to work fine.
installed a bunch of programs, they also all seem to work.
but then i decided to do some backups; i created the rescue cd using windows, and then cloned the hard drive also using windows 7.
but then i noticed the backup program, and decided to click on "set up backup"; nothing happens.
if i try the same from a disk drive/properties (ie click on backup there) nothing happens either.
any ideas? maybe something i installed broke this, but it seems like a pretty basic function to break like this.
Basically, I bought a new USB stick and plugged it in. My computer would search for windows updates, but it would never find the ones required, and the USB wouldn't install. When I unplug the USB and plug it back in again, the computer doesn't even recognize it, and nothing happens. Currently, my computer is not updated, so that's one thing I won't try. I've installed windows 7 updates numerous times in the past, and every time I did, my computer would have problems starting up (i.e. my desktop would be a black screen when it starts and I can't do anything, or the place where I enter my password to log in doesn't load at all).
View 6 Replies View RelatedSo after installing win 7 ultimate x64, 5.1 surround stopped working and now i can only use my 2 front speakers + sub. In test all speakers don't work aswell.
View 3 Replies View RelatedI'm unable to play games requiring DirectX 11, even though I've downloaded it perhaps half a dozen times. Having stumped myself I decided I may as well ask here. The only feedback I've received from things not working is Civilization V says "Requires Service Pack 2 or greater" As far as I know DirectX doesn't update in the Service pack format, and that Windows 7 SP2 doesn't exist yet, and shouldn't be needed for a game of early 2010 as-is. I have an ASUS U56E, with the on-board i5 graphics(I thought it might be that, but my brother's i3 runs said DirectX fine, so maybe mine is damaged) and I, quite frankly, do not want to run it back into Best Buy and hope that it's covered by warranty.
View 4 Replies View Relatedi have already replaced drivers. tried some stuff in the registry and have no access to my dvd/rw drive i have windows 7 internet explorer 8.0 and dell studio 1458. already ran chkdsk
View 1 Replies View Relatedmy computer does not show anything eventhough of connencting the USB or pen drive..what to do ??
View 2 Replies View Relatedthe fan doesnt spin
View 2 Replies View RelatedMy system sound doesn't work anymore I have windows 7 and i was talking on Skype that my call failed and then no more sound.... I check sound part in the control panel but it said no sound devices is installed. what should I do?
View 3 Replies View RelatedI've just downloaded the iCal software, and I get a message telling me that it wont wok on a 64 bit machine.
View 1 Replies View RelatedWindows 7 (new computer) I'm trying to transfer folders from Outlook Express to Thunderbird. Found out that if I first transfer them to Windows Live Mail then to Thunderbird it would be easier. I saved the Outlook Express Folder from my old computer, which is long gone, to a travel drive. Now I'm trying to import them to WLM, but it won't do it. I found out I need to uncheck "read" under properties. I've tried and tried that, but every time it reverts right back to having it checked.
View 11 Replies View RelatedI have an newer HP Netbook running Windows 7. I recently installed Open Office 3.3 on the machine, and it works fine, except for some key sequences. For example, in the OO Writer, the key sequence Ctrl-Home should move the cursor to the top of the doc. This works fine on my older HP XP Pro laptop, but my netbook ignores or doesn't understand it. I have removed OO and reinstalled it, but the problem still occurs. So, I guess I need to figure out if this is a Windows or Open Office issue.
View 3 Replies View RelatedI had to buy laptop because my desktop with winxp died. Now how do I get the scanner to work with win7? I need to scan medical records. The scanner is a Canon Lide 55.
Tech Support Guy System Info Utility version 1.0.0.1win7, scanner
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1844 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 260242 MB, Free - 222580 MB; D: Total - 29690 MB, Free - 28507 MB;
Motherboard: LENOVO, MoutCook, Not Applicable, WB01561071
Antivirus: avast! Antivirus, Updated and Enabled
A problem arised with Windows Installer-package. A DLL-file that is needed to finish this installation couldn't be run. Contact supportstaff or your supplier of this package. That is what my computer says when I am trying to install Java. Why do I have to install a DLL-file? I haven't had to done that before when installing Java.Other programs has also told me to download a special DLL-file, but Java doesn't tell me which one, so I can't download it
View 6 Replies View Relatedwhen win 7 boots up, mouse doesn`t work, at all... no lights underneath. After maybe one to tvo minutes light is up and mouse works normally.
View 8 Replies View Related1) I have a PC running Win7 with 3 HDs(not partition, different HDs).
2) I used Win7 to create an image of the OS HD( C: ) and placed it in D.
3) I used the image once or twice so I know it's a god image, and it's not corrupted.
4) Lately I've been having performence/computer-gets-stuck-issues and I suspected the HD( C: ) because my RAM is fine, and finally windows alreted my that that HD is failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.
5) I replaced the HD that was C: with a new one, and installed Win7 again.
6) Tried to restore using the image and the recorery system said that it needs to format the drive that it's on(makes sense) and ordered me to perform the restore through the windows installation disk,
7)I did. but I get a similiar error that ordered me to restore with an image but using a windows installation disk(and I got to this error using the instllation disk) How can I make the image work?the only problem I can see is that the image was taken off a a different HD than the on I'm trying to restore the image to,but still that's not a good reason for it not to work.
all the icons on my screen have gone white and i cant click anything not even the start button. when i bring up the task manager all it is is a white box. i can login in fine but that is it. when i try torestore nothing happens, i dont have any restore points so i dont want to do a complete restore if i can avoid it. i have tried running chkdsk in safe mode but nothing has worked. i have also run avg rescue cd form a usb and it identified a trojan but i deleted it, still no effect. i have also tried using the recovery cd i got with my samsung laptop but can only use the startup check tool. this comes back with no issues but i cant use any of the other options.
View 2 Replies View RelatedI hav window 7 installed on two hard drives...My E:/ windows work properly for the internet browsers ,Mozilla,safari.... means I'm able to login to the internet account but when I use the C:/ window 7 .. all the browsers doesn't work at all.... all of them shows TRY AGAIN all the time . So, I hav to first log on from the E windows and then restart and use internet in the C windows..
View 3 Replies View RelatedI wanted to reinstall IE9, so I uninstalled it and now IE8 doesnt work, gives that error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.7601.17514
Application Timestamp: 4ce79912
[code]....
When im trying to intall IE9 again it doesnt complete the installation for some reason.I have Windows 7 Home Premium 64 bit?