5.1 Surround Doesn't Work
Nov 27, 2011So after installing win 7 ultimate x64, 5.1 surround stopped working and now i can only use my 2 front speakers + sub. In test all speakers don't work aswell.
View 3 Replies
ADVERTISEMENT
5.1 Surround Doesn't Work Properly In All Applications?
Jul 3, 2012The strand thing that it's working perfectly in AIMP3 , but when I'm playing a movie in classic media player or YT video, only the center and right speakers are workinghe others have this weeird , super low delayed sound , barely Noticeable .This is my motherboard , maybe I've downloaded wrong drivers or something, but I'm pretty sure that before reinstalling my Windows 7, I had this user friendly configuration tweak with sound options . Now it seems to be gone .
View 3 Replies View RelatedCannot Get Surround 5.1 To Work On Windows 7?
Feb 14, 2013Just found a Sharp 5.1 system in my garage. I've rigged it up, all the speakers work fine when playing the radio etc. However it only plays sounds out of one speakerIn the Speaker Configuration tab in Realtek Audio Manager HD it detects there are 5 speakers and a sub however when I click on the sub it plays sounds out two speakers and none of other ones do anything.
View 3 Replies View RelatedCannot Get The Two Rear Speakers In 5.1 Surround System To Work
Jun 8, 2012I recently reinstalled Windows 7 and have since then not been able to use my speakers correctly since. It's important you know that they worked just fine a few days ago before I reinstalled. I did of course do a full format of the hard drive. When I'm configuring the speakers in Windows to 5.1, I'm not getting any feedback from the two rear speakers.My speakers are Logitech Z5500, motherboard Asus 880G Extreme3, sound card Creative SB X-Fi XtremeGamer Fatal1ty Pro. Enabling X-Fi CMSS-3D doesn't do anything either but make the volume of the front speakers a bit lower to compensate for the supposed increased volume of the rear speakers. Which is non existent anyway.
I tried plugging the cables (I use analogue) into the on-board sound card's ports and had the same problem, which tells me it isn't a problem with the Creative sound card, but most likely something in Windows that I'm missing. Testing the speakers through the receiver works just fine. I have also tried removing the drivers I installed completely and reinstalled to see if it just was some installation error. I have also tried removing the on-board sound card drivers and disabling the on-board sound card in BIOS while trying to install the Creative drivers again. This shouldn't have worked anyway since I'm having the same problem with the two sound cards.
Fn Key Doesn't Work Anymore
Dec 4, 2012The other day i had a friend delete some programs from my Asus laptop on startup and running processes to make my computer boot up faster. I think we did something that makes the fn key not work anymore. how to restore this functionality?
View 1 Replies View RelatedBluetooth Doesn't Work?
Jul 7, 2009I have bought a HP 6730b notebook (type: HP KU216ET), it has got built-in luetooth. I have installed 32bit Windows 7, but the bluetooth doesn't work. I cannot find any driver to make that working good.. HP Compaq 6730b Notebook PC*-* Download drivers and software - HP Business Support Center - here is a driver for XP, but when I install, it said that I have to turn on Bluetooth... I don't know what to do.I don't know what's the type of the built-in Bluetooth, maybe broadcom, I tried this driver: Broadcom.com - Bluetooth Software Download
View 4 Replies View RelatedTouchpad DOESN'T Work
Dec 21, 2009I turned of my touch pad using 'FN+F9' and now my 'FN' key is spoilt. Is there away to turn it back on without the 'FN' key?
View 3 Replies View RelatedMacdrive 7 Doesn't Work
Jan 7, 2009Does anybody know of an alternative to macdrive in order to see a hfs+ formatted hard drive?
View 7 Replies View RelatedWin 7 Backup Doesn't Work
Nov 13, 2009i installed windows 7, and everything seemed to work fine.
installed a bunch of programs, they also all seem to work.
but then i decided to do some backups; i created the rescue cd using windows, and then cloned the hard drive also using windows 7.
but then i noticed the backup program, and decided to click on "set up backup"; nothing happens.
if i try the same from a disk drive/properties (ie click on backup there) nothing happens either.
any ideas? maybe something i installed broke this, but it seems like a pretty basic function to break like this.
Touchpad Often Doesn't Work?
Jun 28, 2012Recently, I did a clean install of Windows 7 Home Premium on my MSI GE600. At first, the touchpad behaved the way it should. But now, it is not even detected. I rebooted the laptop and it worked again. Most of the time it doesn�t work though.
I have installed the Elantech driver of the MSI site
USB Stick Doesn't Work
Aug 8, 2012Basically, I bought a new USB stick and plugged it in. My computer would search for windows updates, but it would never find the ones required, and the USB wouldn't install. When I unplug the USB and plug it back in again, the computer doesn't even recognize it, and nothing happens. Currently, my computer is not updated, so that's one thing I won't try. I've installed windows 7 updates numerous times in the past, and every time I did, my computer would have problems starting up (i.e. my desktop would be a black screen when it starts and I can't do anything, or the place where I enter my password to log in doesn't load at all).
View 6 Replies View RelatedDirectX 11 Doesn't Seem To Work
Feb 24, 2012I'm unable to play games requiring DirectX 11, even though I've downloaded it perhaps half a dozen times. Having stumped myself I decided I may as well ask here. The only feedback I've received from things not working is Civilization V says "Requires Service Pack 2 or greater" As far as I know DirectX doesn't update in the Service pack format, and that Windows 7 SP2 doesn't exist yet, and shouldn't be needed for a game of early 2010 as-is. I have an ASUS U56E, with the on-board i5 graphics(I thought it might be that, but my brother's i3 runs said DirectX fine, so maybe mine is damaged) and I, quite frankly, do not want to run it back into Best Buy and hope that it's covered by warranty.
View 4 Replies View RelatedDvd/rw Drive Doesn't Work?
Jul 18, 2012i have already replaced drivers. tried some stuff in the registry and have no access to my dvd/rw drive i have windows 7 internet explorer 8.0 and dell studio 1458. already ran chkdsk
View 1 Replies View RelatedUsb Doesn't Work Windows 7
Dec 16, 2012my computer does not show anything eventhough of connencting the USB or pen drive..what to do ??
View 2 Replies View RelatedThe Cooler From The Cpu Doesn't Work
Jan 24, 2013the fan doesnt spin
View 2 Replies View RelatedAudio Doesn't Work
Feb 1, 2013My system sound doesn't work anymore I have windows 7 and i was talking on Skype that my call failed and then no more sound.... I check sound part in the control panel but it said no sound devices is installed. what should I do?
View 3 Replies View RelatedICal Doesn't Work On 64-bit Machine
Dec 29, 2011I've just downloaded the iCal software, and I get a message telling me that it wont wok on a 64 bit machine.
View 1 Replies View RelatedWhy Uncheck READ Doesn't Work
Dec 31, 2011Windows 7 (new computer) I'm trying to transfer folders from Outlook Express to Thunderbird. Found out that if I first transfer them to Windows Live Mail then to Thunderbird it would be easier. I saved the Outlook Express Folder from my old computer, which is long gone, to a travel drive. Now I'm trying to import them to WLM, but it won't do it. I found out I need to uncheck "read" under properties. I've tried and tried that, but every time it reverts right back to having it checked.
View 11 Replies View RelatedKey Sequence Doesn't Work On Windows 7?
May 5, 2012I have an newer HP Netbook running Windows 7. I recently installed Open Office 3.3 on the machine, and it works fine, except for some key sequences. For example, in the OO Writer, the key sequence Ctrl-Home should move the cursor to the top of the doc. This works fine on my older HP XP Pro laptop, but my netbook ignores or doesn't understand it. I have removed OO and reinstalled it, but the problem still occurs. So, I guess I need to figure out if this is a Windows or Open Office issue.
View 3 Replies View RelatedScanner Doesn't Work With Windows 7?
Jun 11, 2011I had to buy laptop because my desktop with winxp died. Now how do I get the scanner to work with win7? I need to scan medical records. The scanner is a Canon Lide 55.
Tech Support Guy System Info Utility version 1.0.0.1win7, scanner
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1844 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 260242 MB, Free - 222580 MB; D: Total - 29690 MB, Free - 28507 MB;
Motherboard: LENOVO, MoutCook, Not Applicable, WB01561071
Antivirus: avast! Antivirus, Updated and Enabled
Java Doesn't Work To Install?
Feb 25, 2012A problem arised with Windows Installer-package. A DLL-file that is needed to finish this installation couldn't be run. Contact supportstaff or your supplier of this package. That is what my computer says when I am trying to install Java. Why do I have to install a DLL-file? I haven't had to done that before when installing Java.Other programs has also told me to download a special DLL-file, but Java doesn't tell me which one, so I can't download it
View 6 Replies View RelatedOn Boot Mouse Doesn't Work
Aug 5, 2011when win 7 boots up, mouse doesn`t work, at all... no lights underneath. After maybe one to tvo minutes light is up and mouse works normally.
View 8 Replies View RelatedRestoring Using An Image Doesn't Work
Dec 3, 20111) I have a PC running Win7 with 3 HDs(not partition, different HDs).
2) I used Win7 to create an image of the OS HD( C: ) and placed it in D.
3) I used the image once or twice so I know it's a god image, and it's not corrupted.
4) Lately I've been having performence/computer-gets-stuck-issues and I suspected the HD( C: ) because my RAM is fine, and finally windows alreted my that that HD is failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.
5) I replaced the HD that was C: with a new one, and installed Win7 again.
6) Tried to restore using the image and the recorery system said that it needs to format the drive that it's on(makes sense) and ordered me to perform the restore through the windows installation disk,
7)I did. but I get a similiar error that ordered me to restore with an image but using a windows installation disk(and I got to this error using the instllation disk) How can I make the image work?the only problem I can see is that the image was taken off a a different HD than the on I'm trying to restore the image to,but still that's not a good reason for it not to work.
System Restore Doesn't Work
Dec 7, 2012all the icons on my screen have gone white and i cant click anything not even the start button. when i bring up the task manager all it is is a white box. i can login in fine but that is it. when i try torestore nothing happens, i dont have any restore points so i dont want to do a complete restore if i can avoid it. i have tried running chkdsk in safe mode but nothing has worked. i have also run avg rescue cd form a usb and it identified a trojan but i deleted it, still no effect. i have also tried using the recovery cd i got with my samsung laptop but can only use the startup check tool. this comes back with no issues but i cant use any of the other options.
View 2 Replies View RelatedBrowsers Doesn't Work In Windows 7?
Jul 23, 2011I hav window 7 installed on two hard drives...My E:/ windows work properly for the internet browsers ,Mozilla,safari.... means I'm able to login to the internet account but when I use the C:/ window 7 .. all the browsers doesn't work at all.... all of them shows TRY AGAIN all the time . So, I hav to first log on from the E windows and then restart and use internet in the C windows..
View 3 Replies View RelatedUninstalled IE9, Now IE8 Doesn't Work And Can't Install IE9
Oct 7, 2011I wanted to reinstall IE9, so I uninstalled it and now IE8 doesnt work, gives that error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.7601.17514
Application Timestamp: 4ce79912
[code]....
When im trying to intall IE9 again it doesnt complete the installation for some reason.I have Windows 7 Home Premium 64 bit?
Reinstallation Of W-LAN Driver Doesn't Work?
Aug 28, 2011problem with my W-LAN device. Recently I�ve got a strange feeling about it because some things didn�t work correctly, so I decided to reinstall the driver. It didn�t work directly (I don�t know why), so I tried to uninstall it first, to install it again. Now I got this message: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)An update for the latest driver was useless because I already got the latest one. I tried both installing it from the device manager several times, which failed everytime with this message to come, and by the driver setup (there is a folder available on my computer with all drivers installed on it), which seemed not to have any effect, although it said "Installation complete".
View 6 Replies View RelatedVentrilo Doesn't Work When Playing WOW
Jun 17, 2012I've enabled a work around for this by running Vent as as admin. What intrigues me is that on my other two Windows 7 PC's it works fine - it's only one of them where I need admin mode.
View 1 Replies View RelatedSleep Mode Doesn't Work?
Sep 8, 2010I've bough a Dell Inspiron 1564 with Windows 7 home premium x64 last month and everything was fine until a few days ago, when sleep mode stopped working. When I close my lid and open it up after some time there are 2 things that might happen:
1. The screen is just black, all the buttons are lit, I hear the fan, but no reaction at all. So I just forcibly turn off and turn it on again.
2. After opening the lid, nothing happens, when I try to turn it on, it loads up, but informs me that windows has not shut down properly last time (or something like that).
Task Scheduler Doesn't Work?
Dec 23, 2010I tried a few times to create a basic task that was to display a message and it never worked. I used task scheduler on XP for years w/o issues. I went over and over what i could have done wrong and i can't figure it out. The day, time everything was right as far as i can tell. so i've been sitting here creating tasks to display a message 5 minutes ahead so i can wait and see quickly and they too never show. TS is running in services so thats not it.
View 9 Replies View RelatedCommand Prompt Doesn't Work
May 1, 2010My command prompt somehow dosn't seem to work like i want it to. E.g. I want to enable the administrator account. So i type: net user administrator /active:yes Or i type ipconfig /all or getmac to get the mac address.No matter what command i type i get the message: 'something' is not recognized as an internal or external command, operable program or batch file I tried to run command prompt both admin and as common user.
View 9 Replies View Related