Cannot Get The Two Rear Speakers In 5.1 Surround System To Work
Jun 8, 2012
I recently reinstalled Windows 7 and have since then not been able to use my speakers correctly since. It's important you know that they worked just fine a few days ago before I reinstalled. I did of course do a full format of the hard drive. When I'm configuring the speakers in Windows to 5.1, I'm not getting any feedback from the two rear speakers.My speakers are Logitech Z5500, motherboard Asus 880G Extreme3, sound card Creative SB X-Fi XtremeGamer Fatal1ty Pro. Enabling X-Fi CMSS-3D doesn't do anything either but make the volume of the front speakers a bit lower to compensate for the supposed increased volume of the rear speakers. Which is non existent anyway.
I tried plugging the cables (I use analogue) into the on-board sound card's ports and had the same problem, which tells me it isn't a problem with the Creative sound card, but most likely something in Windows that I'm missing. Testing the speakers through the receiver works just fine. I have also tried removing the drivers I installed completely and reinstalled to see if it just was some installation error. I have also tried removing the on-board sound card drivers and disabling the on-board sound card in BIOS while trying to install the Creative drivers again. This shouldn't have worked anyway since I'm having the same problem with the two sound cards.
View 2 Replies
ADVERTISEMENT
Nov 12, 2011
I am using Windows 7 Ultimate x32, Realtek HD Audio and now just connected my old (2003) DELL Altec Lansing ADA995 System. It has a subwofer, 2 Frontspeakers, 1 Center Speaker and 2 Rear Speakers, however I get NO Sound in these 2 Rear Speakers.
View 1 Replies
View Related
Sep 24, 2012
I recently bought Creative A500 5.1 surround sound speakers for my PC. I then bought an internal sound card as i only had 2 speaker inputs on my pc, but then found out that my motherboard has only 1 PCI slot. So i had to buy an external sound card for the surround sound to work (this one) I connected it all up, put the wires in the correct places, but the rear speakers do not play any sound. I know they work, as I put the rear jack into the front output to test them. If I go into sound, then try to configure it to 5.1 I don't have the option to select rear speakers. (picture of what i mean) I can't go into enhancements to select fill speakers either as the tab isn't showing up in properties. And also, as I'm using an external sound card (USB), nothing shows up in Realtek HD audio manager, so I'm not able to do it from there.
View 2 Replies
View Related
Jan 11, 2012
how to adjust realtek hd audio manager to use the rear and front speakers and headsetat the same times>
View 1 Replies
View Related
Aug 29, 2012
I've recently bought a SoundForce 5.1 (Trust) surround speakers set with a SC-5500P 5.1 External Sound Card. At first I didn't have the sound card so I could only insert 1 Jack 3.5mm and only 2 speakers would work at the same time.Now however with the sound card I expected them all to work together, but there's only sound coming out of 2 of them (the other emit a very low 'pshhhhhh').I've tried to configure the setting of my sound into 5.1 surround, but the test sounds only come out of two of the speakers.Do 5.1 sources play in 5.1? If so that rules out it being a 5.1 problem, and makes it that you need some kind of surround sound upmix to be done. I have no idea if there is anything like that for the audio on the Nvidia cards that have a sound card built into them. What you need to look for is some kind of speaker fill option (called Speaker Fill on Realtek, CMSS3d on Creative), or something like Dolby Digital Live (needs to be supported by the card and/or drivers, and can't be just installed as far as I know). I've found this in another thread, and tried a 5.1 wav sample. However it still only comes out of 2 speakers.
View 9 Replies
View Related
Oct 16, 2011
My computer was blue screening. I had a warranty RMA through my manufacturer and I just got it back, fixed. However since then, my Logitech X-530 5.1 surround speakers have been messed up. Initially I thought the front two were not working, but when I was testing I found the Left Rear works and the Right Rear sound comes through the Front Left speaker. The Subwoofer is fine, but the Right Front and Rear have no sound. To be more clear, when my realtek audio manager tests the front two speakers, there is zero sound. When it checks the LR it comes through the LR fine, but the RR comes through the LF speaker. I've unplugged, checked wires, made sure everything was plugged in correctly, and I reinstalled my realtek HD audio driver also.s.
View 1 Replies
View Related
Feb 20, 2012
windows 7 won't recognize my surround sound speakers and when i try playing music the volume of my 2 rear speakers keeps changing (they get louder and softer uncontrollably.) according to windows all my drivers are up to date. when i go to the playback tab in the sound settings menu, my speakers aren't displayed in the list and when i try to configure the speakers it wont let me choose surround speakers. i tried changing the settings in realtek hd audio manager but still i couldn't select surround speakers. the problem is not my speakers because the surround sound works perfectly with my Xbox 360 and my PS3.my laptop is an acer aspire 5736z running windows 7 home premium 32 bitmy speakers are Logitech z506 5.1 surround sound speakers
View 1 Replies
View Related
Nov 27, 2011
So after installing win 7 ultimate x64, 5.1 surround stopped working and now i can only use my 2 front speakers + sub. In test all speakers don't work aswell.
View 3 Replies
View Related
Feb 14, 2013
Just found a Sharp 5.1 system in my garage. I've rigged it up, all the speakers work fine when playing the radio etc. However it only plays sounds out of one speakerIn the Speaker Configuration tab in Realtek Audio Manager HD it detects there are 5 speakers and a sub however when I click on the sub it plays sounds out two speakers and none of other ones do anything.
View 3 Replies
View Related
Jul 3, 2012
The strand thing that it's working perfectly in AIMP3 , but when I'm playing a movie in classic media player or YT video, only the center and right speakers are workinghe others have this weeird , super low delayed sound , barely Noticeable .This is my motherboard , maybe I've downloaded wrong drivers or something, but I'm pretty sure that before reinstalling my Windows 7, I had this user friendly configuration tweak with sound options . Now it seems to be gone .
View 3 Replies
View Related
Dec 12, 2009
I have a Dell XPS M1330 laptop and have recently upgraded to windows 7 professional (32bit) from windows vista. Everything seems to be running smoothly except I can get no sound from the internal laptop speakers. When I plug in external speakers in via the jacks on the front, sound comes through fine, but as soon as I unplug them there is nothing. Headphones also work like this too. Under sounds in device manager, it simply says 'High Definition Audio Device', and I'm not sure if I should be downloading some other drivers?
View 9 Replies
View Related
Aug 23, 2012
i heve a cyber acoustics surround sound system 5150 5.1 and i only get sound out ov 2 speakers i heve dunn a test on all speakers and all ov them graft.properly? my computer is an acer aspire x-1300.
View 3 Replies
View Related
Mar 27, 2012
I get the following error. "The peripheral does not appear to be plugged in"
I've updated the driver and it says the realtek device is working fine. Sound worked just fine on this computer but then stopped. I do not have external speakers.
View 1 Replies
View Related
Mar 3, 2011
my computer not work with two speakers
View 2 Replies
View Related
Jun 4, 2011
i have installed window 7 after removing winXp. my speaker doesnot produce sound, but in window it gives the signal of having sound.
View 3 Replies
View Related
Oct 8, 2011
i can not turn my loud speakers down when pressing on the volume icon, the loud speaker volume bar doesn't appear.
View 1 Replies
View Related
May 27, 2012
There is a red line thru the speaker icon on the monitor - how do I get that off so I can hear the speakers from the monitor?
View 2 Replies
View Related
Apr 5, 2010
I've got this problem with my intex USB Audio Speakers where whenever I plug them in my Windows 7 powered laptop, they just don't work. The default audio device in Control Panel/Sounds changes automatically from my onboard High Definition Audio Device to USB Audio Device (which I think it's normal). Also, there is no problem shown in Device Manager and when I hover my mouse on the Sound icon near the clock (system tray or notification area) it shows that the USB Audio Device are the default. I contacted Intex and they first told me that it might be a laptop problem, but then I installed Windows XP - the sound works great. I installed Ubuntu - the speakers are working also. It seems like it's a problem in Windows 7. I sent them another message telling them this, but they have never contacted me again.
View 4 Replies
View Related
Jan 5, 2012
I installed a radeon gigabyte 6850 graphics card in to my computer a long time ago and after I made the switch from Nvidia to Radeon my input jacks and output jacks stopped working. Usually I can live with it and use my laptop or phone for skype but I've just bought a game on steam and I can't use steam voice chat on a different system then play on my gaming system at the same time and playing games with my friends without voice chat is unacceptable.When I plug a mic in it says its working and it shows up in realtek hd audio but when i try to use it with anything it doesnt work. The bar doesnt even go up when i test it in windows 7 so it must be muted. I've tested the mic with a laptop before so it definitely works. I've reinstalled realtek hd drivers. I think the problem is I'm using hdmi to connect my tv and use it as a monitor and apparently using hdmi sound from amd cards mute all other sounds. I need the speakers on my tv as they are my only speakers, and buying new speakers or a sound card is not a possible option right now. And even if I could get speakers, my tv only connects via hdmi anyway so the sound would still be muted so I really need this fix. how I can get windows 7 sound to work while using hdmi from a radeon graphics card to output sound to my speakers? Does anyone use hdmi to connect their display to an amd graphics card?
View 4 Replies
View Related
Nov 16, 2011
The other day a speaker cord was yanked out of my computer and dismembered the head phone port. When headphones or speakers are plugged in they do not work. The main issue here is when nothing is plugged into the port my laptop speakers do not work. Its as if my computer thinks something is plugged in and has turned off its own speakers.
View 3 Replies
View Related
Sep 9, 2012
Ever since last night, my internal speakers will only work if something is plugged into the headphone jack, be it headphones or external speakers. This happened right after I unplugged some external speakers.In control panel, it says headphones are plugged in when they are not and that they are not plugged in when they are. Sound comes through both the speakers and the headphones when headphones are plugged in.Oddly enough, Skype login sounds still play. Windows startup sounds and all other media, videos, etc doesn't work without the headphones however.I have tried updating the sound card driver using the automatic detection program from the AMD website. Then I tried updating the sound card driver via the HP website. Then I tried a system restore. Nothing has worked so far.
View 3 Replies
View Related
Nov 24, 2012
When I use my headset/mic for a teleconference, I can hear what others are saying in the call, but they cannot hear me. (I'm using Win 7/64-bit.)
When I use the same headset/mic on a computer running Win XP (sp3), everything works.
FYI, I purchased a second identical headset/mic, but I've gotten the same results with Win 7.
View 1 Replies
View Related
Jan 18, 2013
i have headset with microphone, speakers work but microphone doesnt, realtek doesnt detect microphone, dunno whats the problem, searched everywhere on the web and still no answer all drivers are updated and microphone worked earlier. pic also url...
View 4 Replies
View Related
May 18, 2012
I have a Logitech x-530 system that I'm trying set up to my HP Compaq dx2400 Microtower computer. I've plugged in the three connectors to the pins - red in red, pink in pink and blue in black - just like I did on my other computer. However, it only plays sound from the front two speakers.
I make matters worse, I have NO Realtek Audio Manager, and if I edit my speaker settings from the control panel, then I ONLY have the option to choose 2.1 sound - no 5.1.
View 3 Replies
View Related
Jan 17, 2009
Headphones don't work for me for some reason. I have an HP laptop, and it has two headphone jacks, but if I connect to one of them, the sound still comes out of the speakers...
Anyone else have a similar problem, or is it just me?
View 4 Replies
View Related
Jun 16, 2012
Plugged in headphones for an hour. When I removed them the laptop speakers no longer function.hecked volume and mute.Checked playback device area and laptop speakers are enabled and indicated as functioning. Only headphones work.Deleted Audio card from Device manager and rebooted.Windows found latest driver and reinstalled.Same problem, sound in headphones only.....not in laptop speakers.I restored system to point 2 weeks ago and still no sound.
View 4 Replies
View Related
Dec 7, 2009
I have a wired problem with realtek hd r237 windows 7 drivers:
I don't have any sound on laptop's internal speakers but i can hear in headphones.In PLAYBACK DEVICES headphones are detected as speakers and when i unplug them sound automatically turns to SPDIF- no sound on internal speakers.
If a make a sound test (with headphones pluged in) whith Quadraphonic selection i can hear FL in my left headphone ,FR in my right headphone,RL in left internal speaker and RR in right internal speaker.
View 9 Replies
View Related
May 27, 2012
My on-board Realtek front panel speakers don't work in w764, I have a Gigabyte GA-945PL S3 Rev1
View 10 Replies
View Related
Feb 1, 2013
In win7 64 (desktop) I can't enable speakers and headphones to work simultaneously: it's one or the other (very annoying). (IDT Audio drivers ok) In Vista they worked perfectly together.
View 3 Replies
View Related
Feb 1, 2013
I have a hp2009m lcd monitor the speakers wont work
View 3 Replies
View Related
Mar 4, 2011
when headphone's plugged there's sound coming from speakers,then when unplugged there's no sound at all. I think the problem is with the switcher when it should be on headphone mode it's on speaker instead and vice-versa.
View 1 Replies
View Related
