Razer Diamondback Mouse Driver Causing BSOD?
Jul 2, 2011
I own an older Razer Diamondback mouse back from my 2005 build. It has always behaved a little strangely in that it would sometimes not power on when the computer boots up, forcing me to replug it into its USB slot. This behavior persisted through my May 2010 build. Just the other day, however, I noticed that I got a BSOD after replugging the mouse. The culprit was razerlow.sys, a reference to a Razer Diamondback driver. And just this morning, it happened again. (I am including the full error below.)I have not updated my Diamondback driver before this BSOD occurred. Since the BSOD, I uninstalled the driver/software and installed the latest driver from May of this year, but this BSOD occurred again this morning after this update. The only other times I've experienced BSODs are with ATI drivers 10.5-10.11 (I've been on 10.4 until this year), so maybe my recent update to 11.6 has something to do with this? I have made no changes to my hardware, drivers (except ATI), etc. between the last replugging that did not cause a BSOD and the one that did.This error only happens when replugging the mouse when it doesn't boot up. If the mouse boots up and I replug it, the error does not occur. I also just switched USB slots and for whatever reason a Windows pop-up stated that the device is being installed, when it must have been installed the whole time.
Windows 7 64-bit
Asus P7P-55D-E LX
i5-750 @ 3.8 GHz
XFX Radeon 5870
ERROR:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump�62811-29983-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code].....
View 3 Replies
ADVERTISEMENT
Aug 6, 2009
my razer mouse button 5 (side button) don't work on win 7... i installed the razer driver (1.00) ... any idea ?
EDIT : NVM , i was in WINDOWS UPDATE , then there was a facilitative update for the razer mice, now all work fine
View 6 Replies
View Related
May 3, 2009
My Razer Lachesis mouse is not working properly under 7 (jumping cursor).
The system cant find the mouse via firmware and also for firmware and mouseware it`s impossible to upgrade..
Anyone knows when razer is releasing new win seven drivers?
View 9 Replies
View Related
Jan 31, 2011
How do I go about determining which driver is causing my BSOD?
View 14 Replies
View Related
Nov 6, 2011
I am running Win 7 x64 at my notebook Acer 5820TG (i5 430M, ATI Mobility Radeon 5650, 4GB RAM, 640 GB HDD). On a different forum someone checked my crash dumps and figured out that my BSODs are being caused by my Broadcom wireless driver (BCM43225).Basically, I get a BSOD whenever I put the computer to sleep/hibernate. NTB is trying for around 10 minutes go to the sleep/hibernate mode but after this time BSOD appears.I have tried a few different versions of my broadcom driver. Regardless, I still get a BSOD error. I have been using Windows 7 for over a year, and this only started happening on my last update of my notebook (SP1, VGA drivers, ...).
View 3 Replies
View Related
Mar 16, 2010
Quote: Razer has now let loose a left hand version of its popular DeathAdder mouse claiming that it is the first rodent specifically aimed at left-handed gamers more
View 1 Replies
View Related
Jan 15, 2012
Earlier yesterday I was having an issue where sound was both playing through my laptop's speakers as well as the headphones I had plugged in. Not really knowing an exact way to fix this I went to the device and disabled it hoping that could temporarily solve my problem. Now, I am assuming because of this whenever I boot into Windows 7 I get to the "please wait" screen then instantly get a blue screen every time and I can only boot into safe mode. I found this thread (one or more audio service isnt running) through Google and found that this user had the same issues I was having (I am also getting the audio service error when I run the troubleshooterI believer my speakers are Realtek and when I run dxdiag I get the hardware ID of DAUDIOFUNC_01&VEN_10EC&DEV_0272&SUBSYS_1025028D&REV_1000 (I ran this dxdiag in the copy of the Windows 8 dev preview I have also installed to my hard drive)I do have the results from Windows_NT6_BSOD_jcgriff2 attached but when I ran perfmon /report I got: "An error occurred while attempting to generate the report.The system cannot find the path specified."My copy of Windows 7 Home Premium 64 bit came pre-installed on my machine which I got either 2 or 3 years ago, don't remember exactly
View 4 Replies
View Related
Oct 27, 2009
I wonder if anyone knows if DeathAdder and Tarantula going to function if I install Windows7 64bit?
View 5 Replies
View Related
Jan 12, 2009
I have Windows 7 installed on two laptops. One is a Dell Latitude D803 and the other a HP Compaq 6710b. Both would BSOD approximately every 5 minutes. 'TDX.SYS' was the culprit. After running WinDBG I noticed that it was a issue with my network adapter driver 'b57nd60a.sys'. Both laptops have the same network adapter (Broadcom NetLink Gigabit Ethernet) and both were crashing (x32 & x64 versions). I finally went to Broadcom's website and found drivers at the following links:
Broadcom Corporation - Download NetLink Drivers
or
Broadcom Corporation - Download NetLink Drivers
If one doesn't work they other will. Basically when 'TDX.SYS' causes a BSOD it is usually the result of a driver(s) (and some antivirus apps) that aren't fully compatible with Windows 7. You should run WinDBG and find out what driver is causing the error. It's not as hard as you think!
Microsoft's site for using WinDBG:
How to read the small memory dump files that Windows creates for debugging
P.S. Don't worry if you can't get the symbols to install properly. You should still see the file that is probably causing the error listed. If you Google the file(s) you will be on your way to fixing the issue.
View 9 Replies
View Related
Feb 18, 2012
I can't work out what is causing the BSOD. I've overclocked most of my components and they are all appropriately cooled. Not sure if this is a software issue or not.
View 4 Replies
View Related
Jul 16, 2012
I've had 2 bsods and one of them was irql_not_less_or_equal and the second was system service exception. They have this common thing which is ntoskrnl.exe You can see all the info in the rar included.
View 2 Replies
View Related
Dec 12, 2009
I just upgraded to Windows 7 (64 bit) last weekend by doing a clean install from a win741.com purchase. I am currently using a HP Pavilion a6500f computer with a 500GB hard drive. I have been getting BSOD errors over the last several days and it is driving me crazy. I am considering going back to XP or Vista if I can't get this fixed soon.
All of the mindump files mention USBPORT.SYS. I'm assuming that has something to do with my usb ports which only have the following items attached:
HP Deskjet F4280 Printer Linksys USB Network Adapter WD 500GB My Passport (plugged in some of the time) I ran Driver Detective to see if there was an out of date USB driver, but nothing showed. I've included some screenshots of the scan.
View 2 Replies
View Related
Jan 16, 2013
I recently got 2 BSOD referring to Acpi.sys. I couldn't found out what were causing these BSOD's and I'm asking for Your support. Just before the BSOD appears, the PC is sluggish. My computer is a DELL PRECISION T5500, hex core processor XEON 5675, video card: Quadro 4000, 12GB RAM ECC, 1.5 TB HDD and Im running Windows 7-64 bit I have the latest drivers.
View 3 Replies
View Related
Dec 26, 2011
My webcam is causing my pc to reboot with the BSOD, every time I exit the webcam this happens. I have searched around with google and found out that this happens alot and can be diagnosed with Memory Test and Verifier, I have tried these two methods and it did not work for me.
View 1 Replies
View Related
Feb 20, 2012
Today I noticed all my audio-devices in the audio menu were gone except for my USB Headset, I have my speakers connected with a normal cable and these did not show up. I checked my device manager and indeed it showed yellow exclamation marks on the Realtek high definition audio and AMD HD audio drivers. Strange, so I installed the newest realtek drivers, and at the end of the installation this caused a "ks.sys error" blue screen. Trying to reinstall the drivers in safe mode works fine, but when logging back into windows I get the blue screen. I can use windows just fine with my headset plugged in, but I'd like to be able to use my speakers again.
View 1 Replies
View Related
May 14, 2009
When I shut down my VPC at the end of the day after a good few hours use, it causes a BSOD of the laptop reboots.
The error is something along the lines of "An application attempted to release a resource that did not belong to it", that isn't the exact phrase but something very close to it.
Edit: It's done this a few times now, the second it's finished shutting down. One thing I have also noticed is that I can't shut it down correctly too, it informs me that the VPC is locked. So I have to shut down via the task manager, maybe this is what is causing the problem?
View 9 Replies
View Related
Nov 9, 2011
it'll say video error occured and driver reset. this only occured during the previous nvidia driver. once updated it didnt happen.however, i was playing battlefield 3 and had a Internet video running in the background and the sound stuttered as before and my screen black and my machine restarted saying thee was some hyper thing problem on restart. i started in safe mode to get all my dump files. the problem on the 10/28/2011 is before i updated the new driver.the text file is what part of the message said.
View 4 Replies
View Related
Dec 21, 2011
I've got this new laptop last month and after two weeks got my first BSOD. I've done chkdsk, sfc, and last know good config only to have it back again every 3 days or so. I don't have restore point far back enough and don't think I've installed anything that could cause this. The driv'ers are up-to-date, and I don't have Norton or AVG just Kaspersky Internet Security as my antivirus. But I do play LOTRO but at the lowest graphics quality. I don't have any CDs and the laptop didn't come with a Windows disk so I can't repair or reinstall it to its factory settings. Sometimes the BSOD appears when I starting shutting down, otherwise its random.
View 3 Replies
View Related
Dec 31, 2011
My laptop, since a few monthes has been having BSOD crashes repeatidly. I have tried and installed windows many times, and after each install, it would run properly for 3 weeks, then blue screens start to appear. Eventually i recieve BSOD errors and their rate of appearence increases with time, untill windows completely fails to start and crashes just when the microsoft logo appears. I then install a new windows, and the problem repeats itself. I have tried to look for online help, but i find that each forumsite gives a different reason. This time bluescreens have started to appear and just as i log into windows, a BSOD appears, so i had no solution other than copying the minidump files and generating a report (see attachments), although i know it wouldn't be as accurate.Info (failing windows): 7 Proffesional 64 bit, Toshiba E205.Note: The drivers of devices in that windows were all installed. I ran a memory diagnostics test and therefore i don;t suspect faulty ram to be the reason.
View 7 Replies
View Related
Mar 12, 2012
I run HotSpot Shield because my college has a network security that logs your activity (Sonicwall), and I find it to be a little too invading on my privacy.However, I find that HSS keeps causing BSODs while waking from hibernate (whether I'm running 7 or 8). I don't know if this is due to dual booting or simply because HSS runs a virtual network adapter, but I'd like to get it to work properly.
View 2 Replies
View Related
Feb 22, 2011
I found the my AHCI version driver is 6.x where as the latest version is 9.x. This is concering with BSOD's.A few errors I can remember are BSOD stop errors:
-0x000000a
-0x00000019
-0x000000D1
-0x000000D7
View 9 Replies
View Related
Mar 30, 2012
I have a WD 320Gb 3.5inch hard drive that was originally bought as an external drive in an enclosure. A few months ago, while booting, my computer would go through blue screens one after another if the external hard drive was switched on from the enclosure when the computer was started. I never really did anything about that, just left it off and turned it on when i needed it. Mind you, it and the computer still seemed to work fine.
Now i have decided to keep it internally. So, as soon as i booted up after connecting up the same drive, i'm going through these exact same blue screens again. I'm not 100% sure if that is the cause but signs point to it.
Here's the blue screen info:
The error message is:
IRQL_NOT_LESS_OR_EQUAL
and the stop info is:
STOP: 0x0000000A (0x000000B0, 0x00000002, 0x00000000, 0x82250B04)
and finally, here's the picture i took of the blue screen, a bit is cut of but i know it says "IRQL" on the left hand side.
View 1 Replies
View Related
May 7, 2012
OS: Windows 7 Home Premium x64
i7-2600K CPU @ 3.40 Ghz
OEM
8Gb RAM
Asus P8P67Pro
Harware & software build around 6 months old
BIOS, Windows updates and Driver updates applied regularly.
A couple of weeks ago i had a BSOD. Since, when trying to boot, most of the time my monitor turns ON, OFF, ON, OFF, etc...for some time, very rarely leading to a successful boot. No problem accessing Recovery options or BIOS.sometimes (very rarely), it does boot up normally.I have tried everything i can think of (with my limited knowledge).
View 5 Replies
View Related
May 1, 2012
my pc's had a problem where all of a sudden in the middle of whatever you're doing (generally when you're on the internet I think??) the screen suddenly goes black or blue. Sometimes it recovers itself, sometimes it crashes and turns itself off completely. I've also noticed that sometimes it sort of 'hangs' and then comes up with a message saying something along the lines of 'Display driver not working' (I don't even know what a 'driver' is, much less a 'display driver').
View 14 Replies
View Related
Jun 17, 2009
I was having great difficulty in getting a stable LAN connection, but this was due to the driver that was being installed by Windows update.
View 1 Replies
View Related
Oct 28, 2009
all the features work fine in itunes but as soon as I install my Asus D2 drivers itunes won't start unless it's in compatibility mode and then some of the features (like drag and drop) don't work, why would the drivers be causing problems with itunes?
View 2 Replies
View Related
Jul 27, 2012
I recently purchased a new Graphic Card (Nvidia Geforce 670) and ever since I've experienced random freezes and moments where it's drivers stopped working.When the freeze happens It'll remain frozen until I reset the PC and if I've speakers on it'll blow out a nasty BZZZZZZ sound.the freezes appear to occur randomly. It can go days without them and sometimes (like now, I had less then an hour inbetween)In addition to that I quite frequently (daily at least) have my monitors go black and I get the "Nvidia Drivers stopped working" message. If I'm lucky it'll revert back to a previous stage where it worked fine and all I've to do is reboot the programs i'm running. If I'm unlucky, it doesn't stop until i've pushed the reset button.I don't know for sure that it's the new card causing it but considering the circumstances and the issues I'd say it is. Before this card I ran AMD's 6970 without any issues.
I'm running
CPU: Intel Core i7 2600k, Sandy Bridge.
12GB ram
Gigabyte Z68XP-UD3 MoBo
Nvidia Geforce GTX 670
View 6 Replies
View Related
Feb 23, 2009
I haven't been able to get the Vista 64 drivers to work for my Razer Barracuda AC-1 sound card. I didn't know about the driver signing conflict, and tried to install. When the OS kicked it out, I tried to find a way to disable driver signing. While I appear to have stopped the check, uninstalling and installing the drivers is still not working. I seem to have the drivers permanently flagged by Win 7 as unsigned.
Does anyone have any recommendations for trying to get my card working?
View 8 Replies
View Related
Jul 9, 2009
I'm happy to say my Razer Death Adder Mouse software (just loaded) works fine in Windows 7 RC1 build 7100 installed in XP SP3 compat mode (love this mouse )
View 9 Replies
View Related
Aug 9, 2009
I have both these mice and currently running windows 7 build 7600. anyways i can get both mice to work in windows although while in a game (warcraft 3) neither games let the side buttons work. the side buttons work to what i program them to in windows but when i start war3 the buttons don't work at all.
btw the lachesis seems also to be not tracking properly in war3 cursor stops working for like 2 secs or its jumpy so i running the adder which seems to be fine except for the buttons not working in games. really wish i could get teh lachesis to work properly though adder is too slow. any help or any similar problems?
View 1 Replies
View Related
Nov 7, 2009
I have a problem with my Razer DeathAdder since I started using Windows 7 on my computer.
Last time, when I used Windows XP I hadn't had this kind of problem...
alright, so when I specify macro assignment on Button 4 and 5 of my Razer DeathAdder (the 2 buttons that u press with your thumb), my razer starts not working in Warcraft III game.
It works if I use notepad, but not in warcraft game..
I am using Firmware ver 1.27 and Driver ver 1.09...
I am logged in as administrator in my windows.
If anyone had experienced this problem, and it was solved.
View 9 Replies
View Related
