I have Windows 7 installed on two laptops. One is a Dell Latitude D803 and the other a HP Compaq 6710b. Both would BSOD approximately every 5 minutes. 'TDX.SYS' was the culprit. After running WinDBG I noticed that it was a issue with my network adapter driver 'b57nd60a.sys'. Both laptops have the same network adapter (Broadcom NetLink Gigabit Ethernet) and both were crashing (x32 & x64 versions). I finally went to Broadcom's website and found drivers at the following links:
Broadcom Corporation - Download NetLink Drivers
or
Broadcom Corporation - Download NetLink Drivers
If one doesn't work they other will. Basically when 'TDX.SYS' causes a BSOD it is usually the result of a driver(s) (and some antivirus apps) that aren't fully compatible with Windows 7. You should run WinDBG and find out what driver is causing the error. It's not as hard as you think!
Microsoft's site for using WinDBG:
How to read the small memory dump files that Windows creates for debugging
P.S. Don't worry if you can't get the symbols to install properly. You should still see the file that is probably causing the error listed. If you Google the file(s) you will be on your way to fixing the issue.
I can't work out what is causing the BSOD. I've overclocked most of my components and they are all appropriately cooled. Not sure if this is a software issue or not.
I've had 2 bsods and one of them was irql_not_less_or_equal and the second was system service exception. They have this common thing which is ntoskrnl.exe You can see all the info in the rar included.
I just upgraded to Windows 7 (64 bit) last weekend by doing a clean install from a win741.com purchase. I am currently using a HP Pavilion a6500f computer with a 500GB hard drive. I have been getting BSOD errors over the last several days and it is driving me crazy. I am considering going back to XP or Vista if I can't get this fixed soon.
All of the mindump files mention USBPORT.SYS. I'm assuming that has something to do with my usb ports which only have the following items attached:
HP Deskjet F4280 Printer Linksys USB Network Adapter WD 500GB My Passport (plugged in some of the time) I ran Driver Detective to see if there was an out of date USB driver, but nothing showed. I've included some screenshots of the scan.
I recently got 2 BSOD referring to Acpi.sys. I couldn't found out what were causing these BSOD's and I'm asking for Your support. Just before the BSOD appears, the PC is sluggish. My computer is a DELL PRECISION T5500, hex core processor XEON 5675, video card: Quadro 4000, 12GB RAM ECC, 1.5 TB HDD and Im running Windows 7-64 bit I have the latest drivers.
My webcam is causing my pc to reboot with the BSOD, every time I exit the webcam this happens. I have searched around with google and found out that this happens alot and can be diagnosed with Memory Test and Verifier, I have tried these two methods and it did not work for me.
Today I noticed all my audio-devices in the audio menu were gone except for my USB Headset, I have my speakers connected with a normal cable and these did not show up. I checked my device manager and indeed it showed yellow exclamation marks on the Realtek high definition audio and AMD HD audio drivers. Strange, so I installed the newest realtek drivers, and at the end of the installation this caused a "ks.sys error" blue screen. Trying to reinstall the drivers in safe mode works fine, but when logging back into windows I get the blue screen. I can use windows just fine with my headset plugged in, but I'd like to be able to use my speakers again.
When I shut down my VPC at the end of the day after a good few hours use, it causes a BSOD of the laptop reboots.
The error is something along the lines of "An application attempted to release a resource that did not belong to it", that isn't the exact phrase but something very close to it.
Edit: It's done this a few times now, the second it's finished shutting down. One thing I have also noticed is that I can't shut it down correctly too, it informs me that the VPC is locked. So I have to shut down via the task manager, maybe this is what is causing the problem?
it'll say video error occured and driver reset. this only occured during the previous nvidia driver. once updated it didnt happen.however, i was playing battlefield 3 and had a Internet video running in the background and the sound stuttered as before and my screen black and my machine restarted saying thee was some hyper thing problem on restart. i started in safe mode to get all my dump files. the problem on the 10/28/2011 is before i updated the new driver.the text file is what part of the message said.
I've got this new laptop last month and after two weeks got my first BSOD. I've done chkdsk, sfc, and last know good config only to have it back again every 3 days or so. I don't have restore point far back enough and don't think I've installed anything that could cause this. The driv'ers are up-to-date, and I don't have Norton or AVG just Kaspersky Internet Security as my antivirus. But I do play LOTRO but at the lowest graphics quality. I don't have any CDs and the laptop didn't come with a Windows disk so I can't repair or reinstall it to its factory settings. Sometimes the BSOD appears when I starting shutting down, otherwise its random.
My laptop, since a few monthes has been having BSOD crashes repeatidly. I have tried and installed windows many times, and after each install, it would run properly for 3 weeks, then blue screens start to appear. Eventually i recieve BSOD errors and their rate of appearence increases with time, untill windows completely fails to start and crashes just when the microsoft logo appears. I then install a new windows, and the problem repeats itself. I have tried to look for online help, but i find that each forumsite gives a different reason. This time bluescreens have started to appear and just as i log into windows, a BSOD appears, so i had no solution other than copying the minidump files and generating a report (see attachments), although i know it wouldn't be as accurate.Info (failing windows): 7 Proffesional 64 bit, Toshiba E205.Note: The drivers of devices in that windows were all installed. I ran a memory diagnostics test and therefore i don;t suspect faulty ram to be the reason.
I run HotSpot Shield because my college has a network security that logs your activity (Sonicwall), and I find it to be a little too invading on my privacy.However, I find that HSS keeps causing BSODs while waking from hibernate (whether I'm running 7 or 8). I don't know if this is due to dual booting or simply because HSS runs a virtual network adapter, but I'd like to get it to work properly.
I found the my AHCI version driver is 6.x where as the latest version is 9.x. This is concering with BSOD's.A few errors I can remember are BSOD stop errors:
I am running Win 7 x64 at my notebook Acer 5820TG (i5 430M, ATI Mobility Radeon 5650, 4GB RAM, 640 GB HDD). On a different forum someone checked my crash dumps and figured out that my BSODs are being caused by my Broadcom wireless driver (BCM43225).Basically, I get a BSOD whenever I put the computer to sleep/hibernate. NTB is trying for around 10 minutes go to the sleep/hibernate mode but after this time BSOD appears.I have tried a few different versions of my broadcom driver. Regardless, I still get a BSOD error. I have been using Windows 7 for over a year, and this only started happening on my last update of my notebook (SP1, VGA drivers, ...).
I have a WD 320Gb 3.5inch hard drive that was originally bought as an external drive in an enclosure. A few months ago, while booting, my computer would go through blue screens one after another if the external hard drive was switched on from the enclosure when the computer was started. I never really did anything about that, just left it off and turned it on when i needed it. Mind you, it and the computer still seemed to work fine.
Now i have decided to keep it internally. So, as soon as i booted up after connecting up the same drive, i'm going through these exact same blue screens again. I'm not 100% sure if that is the cause but signs point to it.
Here's the blue screen info: The error message is: IRQL_NOT_LESS_OR_EQUAL and the stop info is: STOP: 0x0000000A (0x000000B0, 0x00000002, 0x00000000, 0x82250B04)
and finally, here's the picture i took of the blue screen, a bit is cut of but i know it says "IRQL" on the left hand side.
OS: Windows 7 Home Premium x64 i7-2600K CPU @ 3.40 Ghz OEM 8Gb RAM Asus P8P67Pro Harware & software build around 6 months old BIOS, Windows updates and Driver updates applied regularly.
A couple of weeks ago i had a BSOD. Since, when trying to boot, most of the time my monitor turns ON, OFF, ON, OFF, etc...for some time, very rarely leading to a successful boot. No problem accessing Recovery options or BIOS.sometimes (very rarely), it does boot up normally.I have tried everything i can think of (with my limited knowledge).
I own an older Razer Diamondback mouse back from my 2005 build. It has always behaved a little strangely in that it would sometimes not power on when the computer boots up, forcing me to replug it into its USB slot. This behavior persisted through my May 2010 build. Just the other day, however, I noticed that I got a BSOD after replugging the mouse. The culprit was razerlow.sys, a reference to a Razer Diamondback driver. And just this morning, it happened again. (I am including the full error below.)I have not updated my Diamondback driver before this BSOD occurred. Since the BSOD, I uninstalled the driver/software and installed the latest driver from May of this year, but this BSOD occurred again this morning after this update. The only other times I've experienced BSODs are with ATI drivers 10.5-10.11 (I've been on 10.4 until this year), so maybe my recent update to 11.6 has something to do with this? I have made no changes to my hardware, drivers (except ATI), etc. between the last replugging that did not cause a BSOD and the one that did.This error only happens when replugging the mouse when it doesn't boot up. If the mouse boots up and I replug it, the error does not occur. I also just switched USB slots and for whatever reason a Windows pop-up stated that the device is being installed, when it must have been installed the whole time.
Windows 7 64-bit Asus P7P-55D-E LX i5-750 @ 3.8 GHz XFX Radeon 5870
ERROR: Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:WindowsMinidump�62811-29983-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available
Earlier yesterday I was having an issue where sound was both playing through my laptop's speakers as well as the headphones I had plugged in. Not really knowing an exact way to fix this I went to the device and disabled it hoping that could temporarily solve my problem. Now, I am assuming because of this whenever I boot into Windows 7 I get to the "please wait" screen then instantly get a blue screen every time and I can only boot into safe mode. I found this thread (one or more audio service isnt running) through Google and found that this user had the same issues I was having (I am also getting the audio service error when I run the troubleshooterI believer my speakers are Realtek and when I run dxdiag I get the hardware ID of DAUDIOFUNC_01&VEN_10EC&DEV_0272&SUBSYS_1025028D&REV_1000 (I ran this dxdiag in the copy of the Windows 8 dev preview I have also installed to my hard drive)I do have the results from Windows_NT6_BSOD_jcgriff2 attached but when I ran perfmon /report I got: "An error occurred while attempting to generate the report.The system cannot find the path specified."My copy of Windows 7 Home Premium 64 bit came pre-installed on my machine which I got either 2 or 3 years ago, don't remember exactly
I'm using a laptop (Lenovo Ideapad y470) with Windows 7 Home Premium 32-bit. I'm not sure how I came about this problem but here it is : Whenever I press the keys "x" or "c" on the physical keyboard , the "shift" key will act as if it's jammed . I.E pressing the letters will produce capital letters with the exception of "x" and "c" while pressing the numbers will produce the symbols instead. I've found a way to undo this effecT by pressing "shift" several times on the On-screen keyboard , but it will return every time I press the keys mentioned. I had turned off Sticky keys and filter keys but it doesn't make any difference. [This was typed with the onscreen keyboard.]
I can reproduce freezes - 100% CPU usage, which occasionally lead to crashes pretty consistently just by viewing any video, say bloomberg.com/tv/. CPU usage quickly runs up to 100% on Task Manager and the freeze occurs. No issues when running all my other programs, including streaming radio. I can reproduce this on IE9, as well as Chrome and on Firefox. I had assumed this was a Shockwave Flash item only, but I notice it freezes on Skype video. The only changes I can point to recently are a ton of Windows updates in the last 2 months including SP1. At the time, SP1 failed a couple of times, until I applied a hotfix, now it's on, but I still have the video issues.
I have also by the way downloaded the latest video drivers (accelerated media), bios, and chipset drivers, but this has not helped.
I run Windows 7 64-bit SP1. I have application hang errors in the windows event logs, but not crashes, so I don't see any crash id's
Recently a friend of mine was installing Window's updates on his computer and the computer crashed. When he tried to boot it up again it would no longer boot. We toyed around with it trying different repairs and such but nothing worked.ventually we just re-installed Windows 7 from the startup disks. Now we're having a different problem that seems to be centered on the usb controllers.If we leave the USB controllers on during bootup the computer will get to the starting windows screen then go black.If we turn them off the computer will boot to windows normally, but obviously the USB ports do not work.It will boot into safe mode with the USB enabled in BIOS but the mouse will not work. (Keyboard is PS/2). We tried getting driver off the disks that came with the system but they don't seem to contain any.Is this even a driver issue or are we missing something completely?The computer was from Cyberpower. It has: -Gigabyte 870A-UD3 motherboard-AMD X6 procressor-8 gigs ram-Radeon HD5780-2 800 watt power supplies (computer came with 2 of the video cards but apparently the MB is not crossfire compatible?
My company has acquired a new client for tech support. I went there to install antivirus on their workstations as we do for all our clients. This new client has Win7 on all workstations and a small business server running in a domain environment. I installed Kaspersky on all 8 pc's in their business. The next day we got a call from one of them saying their computer was acting strange. Once I got there I discovered the pc would freeze when launching Quickbooks or Outlook. I ran a malware scan which turned up nothing. Then after some troublshooting steps I decide to uninstall Kaspersky. I didn't want to leave him with no protection so I installed AVG free. Same outcome. The computer only will operate without antivirus.
A few days ago, my computer stopped booting up. The splash screen for the mobo showed up, and then I would get a black screen w/ a white flashing cursor and nothing else. I put in my Win7 install disc to try to do a repair, and eventually figured out that if I change my boot sequence in the BIOS so that it goes to the DVD drive 1st and the boot hard drive last, it boots up just fine. I reset to the last recovery point, changed the BIOS back so it would boot from the hard drive 1st, and everything thing worked fine... until it installed the latest Win7 updates. After that, I had the exact same problems. So I changed the BIOS again as a temporary solution, and then I noticed that the computer wasn't sleeping properly. It used to turn off the display, the hard drives, the case fans, etc. Now, it turns off everything EXCEPT the case fans... which pretty much defeats the purpose of putting it in sleep mode.
Pictures downloaded to my desktop keep crashing MS Live Mail when I attempt to attach one and also when I attempt to fetch one from Adobe Illustrator. However, if I load any pictures from anywhere else they don't crash. I also downloaded a game to my desktop and when I went to open it up I got an error stating the game was incompatible with my OS.when I know it wasn't.
my pc's had a problem where all of a sudden in the middle of whatever you're doing (generally when you're on the internet I think??) the screen suddenly goes black or blue. Sometimes it recovers itself, sometimes it crashes and turns itself off completely. I've also noticed that sometimes it sort of 'hangs' and then comes up with a message saying something along the lines of 'Display driver not working' (I don't even know what a 'driver' is, much less a 'display driver').
A script on this page is causing your web browser to run slowly.If it continues to run your computer might become unresponsive. Stop running this script? check yes or noThis is happening (or at least the only place I have seen it) just on Facebook. I honestly dont understand what it means, and is there anything I can do about it?
I found out earlier that there are a few video drivers that are causing certain games to not run. I need to know how to uninstall them, but cant figure it out.
So, I installed Windows 7 RC today on my Dell Mini 10 and everything was smooth sailing.
At this point my only available resolution was 800x576.
Windows Updates picked up a couple of drivers, one being the Intel GMA 500 drivers. I installed the drivers and the system restarts.
The restart seems slow. I have about 45 seconds of a black screen and my cursor can be moved easily and then all of the sudden the login appears.
I login and the taskbar comes up, but the desktop is black. If I refresh the desktop my wallpaper returns and everything runs fine. The resolution at this point is 1024x576.
If I disable the driver I'm back to square one.
Anyone else experience this problem? Is there a better driver that I should be using?
I was recently trying to play a game on my Nvidia 9500GT when it started stuttering intensely. I thought it was a processor issue, since it was reading at being under 100% load, but when I checked my temperatures, the CPU was barely under any stress while the video card had heated to 111 degrees. Sure enough, when I tried it again on a different game, the frame rate dropped after a few minutes and the card was heated to 113 degrees. I'm assuming the card overheating is causing the stuttering, but I wanted to be sure before I ordered any new parts.
I recently reinstalled my OS and installed the AMD Drivers for my 5830s(crossfired) and they seem to be causing freezes. By freeze I mean that my computer will lock up completely and I cannot move my mouse and I have to then hard restart.
I have tried several solutions, such as reinstalling windows and reinstalling the graphics drivers after removing them in safe mode with driver sweeper. I have tried old versions and the latest versions do not install. I can boot into safe mode successfully and that is how I am asking this.
My Computer specs: AMD Phenom II X6 1050t OCed to 3.2ghz 8gb of Corsair XMS3 RAM 2 XFX Radeon HD 5830s Crossfired 850W Power Supply
