My Razer Lachesis mouse is not working properly under 7 (jumping cursor).
The system cant find the mouse via firmware and also for firmware and mouseware it`s impossible to upgrade..
Anyone knows when razer is releasing new win seven drivers?
I have both these mice and currently running windows 7 build 7600. anyways i can get both mice to work in windows although while in a game (warcraft 3) neither games let the side buttons work. the side buttons work to what i program them to in windows but when i start war3 the buttons don't work at all.
btw the lachesis seems also to be not tracking properly in war3 cursor stops working for like 2 secs or its jumpy so i running the adder which seems to be fine except for the buttons not working in games. really wish i could get teh lachesis to work properly though adder is too slow. any help or any similar problems?
I own an older Razer Diamondback mouse back from my 2005 build. It has always behaved a little strangely in that it would sometimes not power on when the computer boots up, forcing me to replug it into its USB slot. This behavior persisted through my May 2010 build. Just the other day, however, I noticed that I got a BSOD after replugging the mouse. The culprit was razerlow.sys, a reference to a Razer Diamondback driver. And just this morning, it happened again. (I am including the full error below.)I have not updated my Diamondback driver before this BSOD occurred. Since the BSOD, I uninstalled the driver/software and installed the latest driver from May of this year, but this BSOD occurred again this morning after this update. The only other times I've experienced BSODs are with ATI drivers 10.5-10.11 (I've been on 10.4 until this year), so maybe my recent update to 11.6 has something to do with this? I have made no changes to my hardware, drivers (except ATI), etc. between the last replugging that did not cause a BSOD and the one that did.This error only happens when replugging the mouse when it doesn't boot up. If the mouse boots up and I replug it, the error does not occur. I also just switched USB slots and for whatever reason a Windows pop-up stated that the device is being installed, when it must have been installed the whole time.
Windows 7 64-bit
Asus P7P-55D-E LX
i5-750 @ 3.8 GHz
XFX Radeon 5870
ERROR:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump�62811-29983-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code].....
Quote: Razer has now let loose a left hand version of its popular DeathAdder mouse claiming that it is the first rodent specifically aimed at left-handed gamers more
View 1 Replies View RelatedI wonder if anyone knows if DeathAdder and Tarantula going to function if I install Windows7 64bit?
View 5 Replies View RelatedHow do you go about installing the drivers in compatibility mode? I'm buying the deathadder tomorrow and I know that it comes with a disk to install the drivers from but I've heard they work better while under windows xp sp3 compatability mode. How do you install under compatability mode from the cd? Right click the cd and chose compatability mode?
View 7 Replies View RelatedI am getting a Razer Deathadder 3500 DPI Gaming Mouse for Christmas from amazon.com. I am really excited about it but heard it had driver and firmware issues that could totally break the mouse. What should I do when I receive the mouse? Should I use the CD Drivers, plug in the mouse and then update them from razerzone.com? Should I install the drivers, plug in the mouse, then install the firmware? Should I install the CD, plug in the mouse then install the drivers and firmware from razerzone? I have heard that you should install the drivers and then the firmware. DON'T Want this mouse to break the first day. Oh and I don't even know if it comes with a CD
View 5 Replies View RelatedI haven't been able to get the Vista 64 drivers to work for my Razer Barracuda AC-1 sound card. I didn't know about the driver signing conflict, and tried to install. When the OS kicked it out, I tried to find a way to disable driver signing. While I appear to have stopped the check, uninstalling and installing the drivers is still not working. I seem to have the drivers permanently flagged by Win 7 as unsigned.
Does anyone have any recommendations for trying to get my card working?
I'm happy to say my Razer Death Adder Mouse software (just loaded) works fine in Windows 7 RC1 build 7100 installed in XP SP3 compat mode (love this mouse )
View 9 Replies View RelatedI have a problem with my Razer DeathAdder since I started using Windows 7 on my computer.
Last time, when I used Windows XP I hadn't had this kind of problem...
alright, so when I specify macro assignment on Button 4 and 5 of my Razer DeathAdder (the 2 buttons that u press with your thumb), my razer starts not working in Warcraft III game.
It works if I use notepad, but not in warcraft game..
I am using Firmware ver 1.27 and Driver ver 1.09...
I am logged in as administrator in my windows.
If anyone had experienced this problem, and it was solved.
I just bought the SC2 spectre gaming mouse and i downloaded the driver and the mouse is not recognized when i try to configure it. i have it plugged into my usb drive and the lights all come on but the mouse does not work still. i have to use my old mouse?
View 1 Replies View RelatedI've recently acquired a Win 7 PC. I installed a Razer Lycosa keyboard and found out quickly that the "show desktop" shortcut keys (Windows key +D) don't work. I also noticed if I happen to have a search box open, it will enter a D when I try to use the shortcut. This keyboard has worked fine on a XP machine. I also dowloaded the driver from the Razer site and installed it with no change.
View 3 Replies View RelatedI recently just bought a Razer Naga 2012 for my comp. Should I have gotten the death adder instead? I play bf3, mw3, skyrim, gta iv, cod4, minecraft, sniper elite v2, and more Or do you think I went well with the Naga because of the extra buttons and possibilities?
View 3 Replies View RelatedI own a Barracuda AC-1 as well as a HP-1 headset. I had this set up in Windows XP 32bit and got it working brilliantly?However, I recently purchased Windows 7 64bit Home Premium. I installed it this weekend but I have been having trouble setting up the soundcard and headphones to get the same result as I get in Windows XP. I have installed the Windows 7 64bit (Compatible) driver. This time, however, there is no Barracuda AC-1 Control Panel (green and black screen) which normally allows me to make specific changes to the audio. I have only been able to select and test the speakers within Windows 7 Playback Devices. I have played with Quadraphonic, 5.1 and 7.1 settings and still have been unable to achieve the same result as achieved in Windows XP. In fact, if I play some music it only plays through the front two channels as I tested turning down the front channel volume on the headphone volume controller and this turned off all sound.how I can achieve the same result as achived within XP where I have a AC-1 Control Panel (green and black screen) and achieve full sound through all channels.
View 8 Replies View RelatedSo every since I switched from window xp to window 7, my razer barracuda sound card driver does not detect 5.1 speakers. The option to change the DB for each speakers is not there anymore. Is this because the driver for window 7 is not out? Or is it window 7 in general and I need to change some settings. Please let me know what it is! :]
View 16 Replies View RelatedI am having some weird issues with my mouse I can't drag and drop for the love of god, when I do it double click the application or something drop it and choose a new anchor point.I have reinstall drivers, plug it out delete the driver and plug it on another usb port
View 1 Replies View Relatedmy razer mouse button 5 (side button) don't work on win 7... i installed the razer driver (1.00) ... any idea ?
EDIT : NVM , i was in WINDOWS UPDATE , then there was a facilitative update for the razer mice, now all work fine
At first I thought it was just a problem with my mouse but my roommate who has the same mouse is having the same issue. For some reason the scroll-wheel on this mouse is not responding properly. When I scroll up or down it sometimes skips the wrong direction (I.e. if i scroll down it will go up about half the time making it very imprecise and take twice as long). This has only started happening since I've had Windows 7 installed (my roommate is also using Windows 7)
I was wondering if anyone else has noticed this issue with Windows 7 and the Razer Deathadder mouse. It's pretty annoying and I'm almost at the point where I'm just going to buy something else.
So I purchased a Razer Naga because I loved the idea of 12 buttons right on the side for my thumb and since I work at home and pretty much just sleep, eat, and work around this computer I only put it on Sleep Mode. But when I moved my mouse around the next day it wouldn't start up. So I unplugged it and took it back got another one. Same problem occurred. Check to see if it would wake the computer from standby and it was checked. So then I moved on to updating the Firmware. Problem still occurred. So I'm wondering is this Razer's fault or perhaps my Motherboard not being power up enough? I do have a 5 year old power supply on my high end computer that's 550 watts due to my 1000 watt dying.
View 3 Replies View RelatedI bought the Razer Lycosa tonight and plugged it in looking forward to using it but upon loading the computer my bios has gone so slow i see each letter as if it's being typed out and cannot load windows.I have plugged in another keyboard and managed to open my BIOS (blue menu bit). I'm not technical really I just liked the look of the keyboard. I think it's a software related issue?Above all I need my computer back working but has anyone come across this before?I noticed I had some windows updates recently and also read a similar thread of which I can no longer find on this web site.
View 7 Replies View RelatedBackground, I'm somewhat of a techie, not much. Been playing around with Windows 7 recently, 64 bit. Just need some help/advice.
I have an old Logitech MX510 mouse and I wanted to install the Logitech software so I could program the buttons. Turns out Logitech doesn't offer anything past XP. So I downloaded the XP versionof the software and ran it on my Windows 7 in compatibility mode for XP (SP2), as administrator. Everything installed, but the mouse software didn't work. Windows driver was overriding Logitech, probably because it was more recent.
So I tried uninstalling the logitech stuff seeing as it didn't work. Unfortunately I got an error saying I was missing a file i8042prt.sys and therefore the software could not be uninstalled. Hm, I looked up the file and supposedly it should be in Windows/System32/Drivers. I didn't have it, so I thought I'd be smart. I copied the file from my old Windows XP directories and pasted it into the correct location, ran the uninstall, and everything was removed easily. Cool, so after that was done I thought that well I shouldn't leave a random file around in my systems folder so I tried deleting it.
Turns out, I couldn't delete the file I had pasted (i8042prt.sys) because I no longer had permission. As administrator this was kinda weird so I looked at who had permission. Only System and TrustedInstaller (I'm guessing this came from the Logitech software installer) had full permission. As admin, I could only read and execute. Looked around at some of the other files I have in my Drivers folder and the permissions were all similar. Administrator didn't have permission for most of the files, but TrustedInstaller did.
So...anyone know if this is a problem or anything? Everything seems to be working fine...but it kinda irks me that even as admin I can't touch many files. On a side note, I'm curious to know if the i8042prt.sys file was there originally and got deleted or if it's only there because I put it there. I would appreciate if anyone running Windows 7 could check and lemme know.
Edit: Also this is still a pretty fresh install, so no system restore points before the incident.
After installing win 7 over xp(clean install by formatting only C drive), will it recognise files in other partitions. Also is it necessary to install keyboard,mouse,etc drivers?
View 5 Replies View RelatedI'm gonna build my first computer today. Since I already have a notebook, I noticed that if I connected a new keyboard, Windows searched for drivers. But does a new computer also require the drivers for the keyboard and mouse before installing the OS?
View 10 Replies View RelatedThis morning I was attempting to remove all my ATI related drivers ue to a display driver error I kept getting so that I can start fresh with a clean installation of the ATI video drivers. I went into the registry and deleted all the ATI related stuff I could find to make sure I had everything. I restarted my computer, and lo and behold, my keyboard and mouse weren't functioning at all, and I couldn't log in because of that. I realized in deleting those ATI drivers I'd possibly removed the USB controllers. So I had nowhere else to go except to system restore, but it told me I had no restore points, which is frustrating. So I'm stuck, i can't go back to an earlier date, nor can I log in.
View 10 Replies View RelatedI just set up a new build with Asus P8Z77-V mobo and windows 7. Not knowing better I tried to install Al Suite from Asus and it didn't install correctly. Anyway it was giving me error codes and I could not uninstall all of its files. So I then used AutoRun to delete the files. Well I must have deleted something I shouldn't have because now my mouse and keyboard don't work in Windows. They do work in bios and I set bios to defaults. I also started in safe mode but nothing. I tried a PS wired keyboard and still nothing. Since its new I have no back-up or recovery disk. I can't even install a disk because I can't click run. The only thing I can think to do is disconnect everything from mobo even the battery then reconnect and see what happens. If all else fails I guess I'll have to format everything and start a clean install again.
View 4 Replies View RelatedMicrosoft Intellitype and Intellipoint 7.0 drivers released.
View 7 Replies View RelatedI havent got roccat kone drivers to work, anyone else had problem with mouse? Should i install first drivers then connect usb cable ?
View 9 Replies View RelatedHow I can get multi touch mouse drivers for my sony vaio.
View 1 Replies View RelatedMy computer qwill freeze for a few seconds followed by system lag which seems to get worse (freezing every few seconds/taking 2 seconds to recognise a click etc.). If i reset my computer it resolves the issue but i was hoping you guys may be able to give me more insight as to what the issue may be.It nearly always happens when i am browsing in firefox. Have never had it happen to me during gaming etc. which is why i'm hesitant to believe it is to do with my GPU or it's drivers which are always kept up to date.i have included pics of the cursor and what processes were running at the time of the freeze/lag
View 9 Replies View RelatedLately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
View 3 Replies View Relatedi'm trying to order something from a website and the cursor want open my cart for me to look at it and finish my order. this is happening in several sites not just one.
View 1 Replies View Related