So every since I switched from window xp to window 7, my razer barracuda sound card driver does not detect 5.1 speakers. The option to change the DB for each speakers is not there anymore. Is this because the driver for window 7 is not out? Or is it window 7 in general and I need to change some settings. Please let me know what it is! :]
View 16 RepliesI haven't been able to get the Vista 64 drivers to work for my Razer Barracuda AC-1 sound card. I didn't know about the driver signing conflict, and tried to install. When the OS kicked it out, I tried to find a way to disable driver signing. While I appear to have stopped the check, uninstalling and installing the drivers is still not working. I seem to have the drivers permanently flagged by Win 7 as unsigned.
Does anyone have any recommendations for trying to get my card working?
I own a Barracuda AC-1 as well as a HP-1 headset. I had this set up in Windows XP 32bit and got it working brilliantly?However, I recently purchased Windows 7 64bit Home Premium. I installed it this weekend but I have been having trouble setting up the soundcard and headphones to get the same result as I get in Windows XP. I have installed the Windows 7 64bit (Compatible) driver. This time, however, there is no Barracuda AC-1 Control Panel (green and black screen) which normally allows me to make specific changes to the audio. I have only been able to select and test the speakers within Windows 7 Playback Devices. I have played with Quadraphonic, 5.1 and 7.1 settings and still have been unable to achieve the same result as achieved in Windows XP. In fact, if I play some music it only plays through the front two channels as I tested turning down the front channel volume on the headphone volume controller and this turned off all sound.how I can achieve the same result as achived within XP where I have a AC-1 Control Panel (green and black screen) and achieve full sound through all channels.
View 8 Replies View RelatedI wonder if anyone knows if DeathAdder and Tarantula going to function if I install Windows7 64bit?
View 5 Replies View RelatedMy motheboard is an Asus P8H67, like this link: url...How you can see it have 2 SATA 6gb/s connectorsMy hard disck is a Seagate Barracuda Green 2T 6GB/s, like this link: url...The hard disk is connected in a Sata 3gb/s connector. Can i turn it on the 6GB/s connector?
View 1 Replies View RelatedI have replaced my ASUS P8 Z68-V/GEN3 with an Intel Desktop Board DZ77SL-50K and at the same time the primary hard drive has changed from a 1TB Seagate Barracuda to a 3TB Seagate Barracuda. The new system is working fine apart from that the 1TB Seagate Barracuda does not show up in Computer, Disk Management, MiniTools partition management, DiskWizard or anywhere else no matter which SATA cable, SATA port or computer is used. Consequently, I am unable to retrieve any files from the old HDD which is disastrous for my business. How to retrieve any number of files from the unrecognised HDD.
View 8 Replies View RelatedI went to Fry's and got a Seagate Barracuda 1TB 5900 RPM Hard Drive. I plugged it in as soon as I got home and it didn't show up in 7. I'll see if it wants to work with XP or Ubuntu, but I don't have high hopes.
View 5 Replies View RelatedHad Windows XP installed on an old Seagate Barracuda 7200.7 120GB.Formatted the drive for a clean install from Windows 7 DVDNow I get this:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
It is, and yes it can. And why is it even saying this when the installer can format and partition this drive till it turns blue.It gives me the option to "Load Driver" but there are no drivers for this HDD, it's all pre programmed in the motherboards.
Problem with my acer m4 series computer. I recently installed backtrack linux and then fedora onto my seagate barracuda st3500418as hard drive. Now I deleted the partition containg grub and the extended partition containing fedora. My windows 7 installation was corrupted all along the way.I want to repair or freshly install windows but it says I need to load my own drivers. Whenever I boot into safe mode or start windows regularly, it flashes a blue screen and then reboots. By the way, I have the installation disk.
View 10 Replies View RelatedUsing Windows 7 Ultimate 64-bit. W/ASUS P7P55D Deluxe board. Very stable and non buggy. Computer was running great with multiple drives. I substituted one of my 1TB drives with a brand new Seagate 3 TB drive. With the new drive hooked up, the computer will not boot and gives a message that there is no hard drive detected, put media in and hit the key. (something to that effect).
If I enter the bios in the condition, it shows all the drives in their correct order and the boot sequence is the first hard drive, CD, etc. It has detected the new drive as drive #3. But it will not boot. But, if I disconnect the new drive (power and SATA connector), the compute will boot up fine. I have checked all the connectors ad they seem fine. Is there something about the sequence in which the SATA connectors have to be connected?
I have a Dell XPS M1330 laptop and have recently upgraded to windows 7 professional (32bit) from windows vista. Everything seems to be running smoothly except I can get no sound from the internal laptop speakers. When I plug in external speakers in via the jacks on the front, sound comes through fine, but as soon as I unplug them there is nothing. Headphones also work like this too. Under sounds in device manager, it simply says 'High Definition Audio Device', and I'm not sure if I should be downloading some other drivers?
View 9 Replies View RelatedI'm happy to say my Razer Death Adder Mouse software (just loaded) works fine in Windows 7 RC1 build 7100 installed in XP SP3 compat mode (love this mouse )
View 9 Replies View RelatedI have both these mice and currently running windows 7 build 7600. anyways i can get both mice to work in windows although while in a game (warcraft 3) neither games let the side buttons work. the side buttons work to what i program them to in windows but when i start war3 the buttons don't work at all.
btw the lachesis seems also to be not tracking properly in war3 cursor stops working for like 2 secs or its jumpy so i running the adder which seems to be fine except for the buttons not working in games. really wish i could get teh lachesis to work properly though adder is too slow. any help or any similar problems?
I have a problem with my Razer DeathAdder since I started using Windows 7 on my computer.
Last time, when I used Windows XP I hadn't had this kind of problem...
alright, so when I specify macro assignment on Button 4 and 5 of my Razer DeathAdder (the 2 buttons that u press with your thumb), my razer starts not working in Warcraft III game.
It works if I use notepad, but not in warcraft game..
I am using Firmware ver 1.27 and Driver ver 1.09...
I am logged in as administrator in my windows.
If anyone had experienced this problem, and it was solved.
I just bought the SC2 spectre gaming mouse and i downloaded the driver and the mouse is not recognized when i try to configure it. i have it plugged into my usb drive and the lights all come on but the mouse does not work still. i have to use my old mouse?
View 1 Replies View RelatedI've recently acquired a Win 7 PC. I installed a Razer Lycosa keyboard and found out quickly that the "show desktop" shortcut keys (Windows key +D) don't work. I also noticed if I happen to have a search box open, it will enter a D when I try to use the shortcut. This keyboard has worked fine on a XP machine. I also dowloaded the driver from the Razer site and installed it with no change.
View 3 Replies View RelatedHow do you go about installing the drivers in compatibility mode? I'm buying the deathadder tomorrow and I know that it comes with a disk to install the drivers from but I've heard they work better while under windows xp sp3 compatability mode. How do you install under compatability mode from the cd? Right click the cd and chose compatability mode?
View 7 Replies View RelatedMy Razer Lachesis mouse is not working properly under 7 (jumping cursor).
The system cant find the mouse via firmware and also for firmware and mouseware it`s impossible to upgrade..
Anyone knows when razer is releasing new win seven drivers?
I recently just bought a Razer Naga 2012 for my comp. Should I have gotten the death adder instead? I play bf3, mw3, skyrim, gta iv, cod4, minecraft, sniper elite v2, and more Or do you think I went well with the Naga because of the extra buttons and possibilities?
View 3 Replies View RelatedI am having some weird issues with my mouse I can't drag and drop for the love of god, when I do it double click the application or something drop it and choose a new anchor point.I have reinstall drivers, plug it out delete the driver and plug it on another usb port
View 1 Replies View RelatedI am getting a Razer Deathadder 3500 DPI Gaming Mouse for Christmas from amazon.com. I am really excited about it but heard it had driver and firmware issues that could totally break the mouse. What should I do when I receive the mouse? Should I use the CD Drivers, plug in the mouse and then update them from razerzone.com? Should I install the drivers, plug in the mouse, then install the firmware? Should I install the CD, plug in the mouse then install the drivers and firmware from razerzone? I have heard that you should install the drivers and then the firmware. DON'T Want this mouse to break the first day. Oh and I don't even know if it comes with a CD
View 5 Replies View Relatedmy razer mouse button 5 (side button) don't work on win 7... i installed the razer driver (1.00) ... any idea ?
EDIT : NVM , i was in WINDOWS UPDATE , then there was a facilitative update for the razer mice, now all work fine
At first I thought it was just a problem with my mouse but my roommate who has the same mouse is having the same issue. For some reason the scroll-wheel on this mouse is not responding properly. When I scroll up or down it sometimes skips the wrong direction (I.e. if i scroll down it will go up about half the time making it very imprecise and take twice as long). This has only started happening since I've had Windows 7 installed (my roommate is also using Windows 7)
I was wondering if anyone else has noticed this issue with Windows 7 and the Razer Deathadder mouse. It's pretty annoying and I'm almost at the point where I'm just going to buy something else.
So I purchased a Razer Naga because I loved the idea of 12 buttons right on the side for my thumb and since I work at home and pretty much just sleep, eat, and work around this computer I only put it on Sleep Mode. But when I moved my mouse around the next day it wouldn't start up. So I unplugged it and took it back got another one. Same problem occurred. Check to see if it would wake the computer from standby and it was checked. So then I moved on to updating the Firmware. Problem still occurred. So I'm wondering is this Razer's fault or perhaps my Motherboard not being power up enough? I do have a 5 year old power supply on my high end computer that's 550 watts due to my 1000 watt dying.
View 3 Replies View RelatedI bought the Razer Lycosa tonight and plugged it in looking forward to using it but upon loading the computer my bios has gone so slow i see each letter as if it's being typed out and cannot load windows.I have plugged in another keyboard and managed to open my BIOS (blue menu bit). I'm not technical really I just liked the look of the keyboard. I think it's a software related issue?Above all I need my computer back working but has anyone come across this before?I noticed I had some windows updates recently and also read a similar thread of which I can no longer find on this web site.
View 7 Replies View RelatedI own an older Razer Diamondback mouse back from my 2005 build. It has always behaved a little strangely in that it would sometimes not power on when the computer boots up, forcing me to replug it into its USB slot. This behavior persisted through my May 2010 build. Just the other day, however, I noticed that I got a BSOD after replugging the mouse. The culprit was razerlow.sys, a reference to a Razer Diamondback driver. And just this morning, it happened again. (I am including the full error below.)I have not updated my Diamondback driver before this BSOD occurred. Since the BSOD, I uninstalled the driver/software and installed the latest driver from May of this year, but this BSOD occurred again this morning after this update. The only other times I've experienced BSODs are with ATI drivers 10.5-10.11 (I've been on 10.4 until this year), so maybe my recent update to 11.6 has something to do with this? I have made no changes to my hardware, drivers (except ATI), etc. between the last replugging that did not cause a BSOD and the one that did.This error only happens when replugging the mouse when it doesn't boot up. If the mouse boots up and I replug it, the error does not occur. I also just switched USB slots and for whatever reason a Windows pop-up stated that the device is being installed, when it must have been installed the whole time.
Windows 7 64-bit
Asus P7P-55D-E LX
i5-750 @ 3.8 GHz
XFX Radeon 5870
ERROR:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump�62811-29983-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code].....
I have a Creative SB X-Fi Xtreme PCI-Ex, and Logitech Z-5500 5.1 THX speakers. All speakers work; all software, drivers and codecs are up-to-date. Recently I noticed that in the Speaker Setup screen, the test button only results in sound from the left and right front speakers.
I checked because after a VLC update, mkv files no longer played correctly in the 5.1 mode. Music played, but the voices were muted (while no speakers are muted, and all are connected). I have to select "2 front, 2 rear" Audio Device in order to hear the speech as well.
I have the same problem when playing movies in PowerDVD, where I have to select the 2-speakers setting in order to hear all the sound.
Note:
- Previously the test button did sound all 5 speakers
- The test button on the Logitech remote still sounds all 5 speakers
I have Windows 7 Professional, 32 bit.
only my front left and sub and main speaker work and if i put the cords in a different hole then only one will work and i got all of the in the right colour coded hole i have tride everything WHAT DO I DO!
View 2 Replies View Relatedmy computer doesn't recognize logitech speakers, it does show realtech are they the same?
View 3 Replies View RelatedQuote: Razer has now let loose a left hand version of its popular DeathAdder mouse claiming that it is the first rodent specifically aimed at left-handed gamers more
View 1 Replies View RelatedCan you help me with the instruction to detect if my os is x64 or x84.
View 3 Replies View Related