1TB Seagate Barracuda Does Not Show Up With New Mobo
Nov 18, 2012
I have replaced my ASUS P8 Z68-V/GEN3 with an Intel Desktop Board DZ77SL-50K and at the same time the primary hard drive has changed from a 1TB Seagate Barracuda to a 3TB Seagate Barracuda. The new system is working fine apart from that the 1TB Seagate Barracuda does not show up in Computer, Disk Management, MiniTools partition management, DiskWizard or anywhere else no matter which SATA cable, SATA port or computer is used. Consequently, I am unable to retrieve any files from the old HDD which is disastrous for my business. How to retrieve any number of files from the unrecognised HDD.
View 8 Replies
ADVERTISEMENT
Nov 26, 2011
My motheboard is an Asus P8H67, like this link: url...How you can see it have 2 SATA 6gb/s connectorsMy hard disck is a Seagate Barracuda Green 2T 6GB/s, like this link: url...The hard disk is connected in a Sata 3gb/s connector. Can i turn it on the 6GB/s connector?
View 1 Replies
View Related
Dec 1, 2009
I went to Fry's and got a Seagate Barracuda 1TB 5900 RPM Hard Drive. I plugged it in as soon as I got home and it didn't show up in 7. I'll see if it wants to work with XP or Ubuntu, but I don't have high hopes.
View 5 Replies
View Related
Feb 27, 2010
Had Windows XP installed on an old Seagate Barracuda 7200.7 120GB.Formatted the drive for a clean install from Windows 7 DVDNow I get this:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
It is, and yes it can. And why is it even saying this when the installer can format and partition this drive till it turns blue.It gives me the option to "Load Driver" but there are no drivers for this HDD, it's all pre programmed in the motherboards.
View 2 Replies
View Related
Dec 21, 2012
Problem with my acer m4 series computer. I recently installed backtrack linux and then fedora onto my seagate barracuda st3500418as hard drive. Now I deleted the partition containg grub and the extended partition containing fedora. My windows 7 installation was corrupted all along the way.I want to repair or freshly install windows but it says I need to load my own drivers. Whenever I boot into safe mode or start windows regularly, it flashes a blue screen and then reboots. By the way, I have the installation disk.
View 10 Replies
View Related
Aug 29, 2012
Using Windows 7 Ultimate 64-bit. W/ASUS P7P55D Deluxe board. Very stable and non buggy. Computer was running great with multiple drives. I substituted one of my 1TB drives with a brand new Seagate 3 TB drive. With the new drive hooked up, the computer will not boot and gives a message that there is no hard drive detected, put media in and hit the key. (something to that effect).
If I enter the bios in the condition, it shows all the drives in their correct order and the boot sequence is the first hard drive, CD, etc. It has detected the new drive as drive #3. But it will not boot. But, if I disconnect the new drive (power and SATA connector), the compute will boot up fine. I have checked all the connectors ad they seem fine. Is there something about the sequence in which the SATA connectors have to be connected?
View 1 Replies
View Related
Dec 28, 2010
i had to re set my pc to factory.when i plugged in my seagate ext hard drive, i cant view my documents anymore. it keeps saying i dont have permission to access the folder...i have tried renaming me as the administrator, but my head is a bit messed up with it now,, i'm not what you call a technical pc person
View 4 Replies
View Related
Dec 1, 2012
After searching the entirety of the internet I have come here to try to resolve my problem. I have a Seagate barracuda 1.5tb 3.5" 7200rpm hard drive which i was previously using to run windows server 2008. I am now trying to use it as an external hard drive for my laptop, however the laptop does not seem to recognize it. I tried using two different cases, three different usb ports, and i confirmed that everything was properly plugged in and powered on. The hard drive does not appear in disk manager, my computer, or the BIOS.
View 3 Replies
View Related
Nov 23, 2011
I reimaged my computer because I was having a whole bunch of trubble with it (no of which really matter now). After reimaging I tried to access some of the files I saved on my external hard drive, but no matter what I tried I could not get access to the files.The drive appears in device Manager and in the USB Device pages, and I have tried uninstalling and reinstalling the drive. But for some reason I just can't access the device.
View 3 Replies
View Related
Feb 23, 2009
I haven't been able to get the Vista 64 drivers to work for my Razer Barracuda AC-1 sound card. I didn't know about the driver signing conflict, and tried to install. When the OS kicked it out, I tried to find a way to disable driver signing. While I appear to have stopped the check, uninstalling and installing the drivers is still not working. I seem to have the drivers permanently flagged by Win 7 as unsigned.
Does anyone have any recommendations for trying to get my card working?
View 8 Replies
View Related
Sep 16, 2010
I own a Barracuda AC-1 as well as a HP-1 headset. I had this set up in Windows XP 32bit and got it working brilliantly?However, I recently purchased Windows 7 64bit Home Premium. I installed it this weekend but I have been having trouble setting up the soundcard and headphones to get the same result as I get in Windows XP. I have installed the Windows 7 64bit (Compatible) driver. This time, however, there is no Barracuda AC-1 Control Panel (green and black screen) which normally allows me to make specific changes to the audio. I have only been able to select and test the speakers within Windows 7 Playback Devices. I have played with Quadraphonic, 5.1 and 7.1 settings and still have been unable to achieve the same result as achieved in Windows XP. In fact, if I play some music it only plays through the front two channels as I tested turning down the front channel volume on the headphone volume controller and this turned off all sound.how I can achieve the same result as achived within XP where I have a AC-1 Control Panel (green and black screen) and achieve full sound through all channels.
View 8 Replies
View Related
Nov 28, 2009
So every since I switched from window xp to window 7, my razer barracuda sound card driver does not detect 5.1 speakers. The option to change the DB for each speakers is not there anymore. Is this because the driver for window 7 is not out? Or is it window 7 in general and I need to change some settings. Please let me know what it is! :]
View 16 Replies
View Related
Aug 25, 2011
I'm putting together a slide show of 3D images that I want to show on my TV next week when we have company.I would like the images to stay on the screen a little longer without having to actually create a slide show in some special application like Premiere.
The Slide Show function in Explorer works great if I can control the timing.
View 2 Replies
View Related
Oct 14, 2011
just completed a first-time new Windows 7 PC build. Successful installation of Windows 7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage.
BIOS sees all HDDs, but are not viewable in Disk Management.
System Specs:
Antec Nine Hundred
ASUS P6X58D-E MOBO
[Code].....
However, only three are visible in Disk Management. Missing (1) WD 500GB (previously used on WinXP system) and (1) new WD 1T.
View 2 Replies
View Related
Oct 25, 2009
I have a driver disc for my Asus mobo, do I need to use it now on 64?
View 1 Replies
View Related
Jan 15, 2013
I'm looking to upgrade my CPU and Motherboard from what I currently have.I recently purchased a GeForce GTX 680 but I am seeing minimal improvement from my previous GeForce GTX 480, and have come to the conclusion its my CPU holding me back.
Current specs -
OS - Windows 7 Home
CPU - Intel i7 930 @ 2.80GHz
Motherboard - Gigabyte X58A-UD5
I have been told in the past I cannot replace one and not the other due to my CPU/Motherboard being 1366 pin which is no longer in make.
View 3 Replies
View Related
Aug 7, 2011
I just got a new mobo and CPU and was wondering if I will need to reinstall windows with this. I have read different things, some said you can just repair others say complete reinstall.
View 2 Replies
View Related
Sep 20, 2012
low computer knowledge person here and I have recently come into a problem after replacing my mobo/processor/gpu from my old computer. After hooking up the computer and booting it up, it hits the mobo screen then quickly goes into the black screen that says that windows 7 can not be started and gives me the two choices of system startup restore and start windows normally.
Starting windows normally unfortunately returns me to the black screen and so I tried out the restore but to no avail it was unable to fix my problem.Also, I was stupid enough to not transfer any files from my hard drive off to a backup.
My two questions are if it's possible for me to put my hard drive in a friends computer and take the files off there and also if there is any way to fix my hard drive after changing motherboards.
View 15 Replies
View Related
Oct 28, 2009
I just built my PC (first one, sounded like a good idea at the time) and was told that getting the latest drivers would "fix" this issue. Problem is, I haven't had a PC or really been on the net since 2001, (don't laugh) so.....I don't know how to get the "right" ones. I realize that i've built something waaaayyy over my head/experience level, so now I just want to learn all that I can.
View 6 Replies
View Related
Oct 2, 2012
OEM pc MOBO died, replaced MOBO, windows having trouble booting (expected). attempting repair with no results but FAIL. I am noobish, so I ask, what can I use to help the repair process? PS: I upgraded my OS out of the box From win 7 home premium OEM install, to Windows 7 Ultimate x64 via disk. I also have win 7 premium (full) on disk from another PC i installed it too. I would do a clean install, but I can't lose any of my photos and data.
View 2 Replies
View Related
Oct 31, 2009
I have an asrock 775dual-VSTA and I recently upgraded to Windows 7 Ultimate, 32bit.
Things seemed fine, but I realized my USB was performing very slowly.
For example, it takes hours and hours just to upload a few albums to my iPod.
I presume it's a motherboard driver problem. Does anyone know of a fix for this? I dont see any Windows 7 drivers from Asrock for this Mobo.
Im *really* hoping I dont have to buy a new one.
Here are some screenshots from my Device Manager. As you can see, USB seems to be fine, but there are those unknown devices that I have no idea what they are. As far as I can tell, everything is working fine except the USB speed so I presume these unknown devices are related?
View 1 Replies
View Related
Nov 2, 2009
If device manager is happy that Windows 7 has managed to find drivers for everything automatically, would the team recommend leaving well alone or going for the mobo vendors drivers?
(I ask because all was well until I installed the Asus Windows 7 drivers for my P5Q...)
View 3 Replies
View Related
Sep 25, 2011
I have an issue with my system.
- ASUS M4N68T-M LE V2 MoBo
- Processor is AMD phenom II X4 965 Black Edition.
- One Stick of 2Gb memory DDR 3
- ATI Radeon 6870 Sapphire.
If I restart my system (and this happens like out of 100 restarts 97 times) the system would be on the black post screen and say that the CPU is not compatible with my mobo. Then in order to resolve this I have to got to BIOs and turn on all the cpu cores and the unleashing mode under CPU and restart. Then it would reflect that all the **4 cores are active** and then it would work fine. But why does this happen after every restart. I thought it was CMOS battery but the date and time and other BIOS settings are fine.
View 6 Replies
View Related
Oct 11, 2011
I know that since during a windows installation, certain libraries are installed specifically for certain types of chipsets/cpu's and that an abrupt hardware change can cause failures. I read on an article somewhere that you can migrate windows without hardware errors if you manage to get windows to operate on a politically correct mode similar safe mode to boot up with minimal functionality before installing the appropriate drivers for the new board.
View 3 Replies
View Related
Jan 8, 2012
ok, sounds like a stupid question, i know, but if i purchase them by ende of tomarrow i get 25% off, and i plan on upgrading mobo soon. i have been generaly informed on another post that 1600 in 1333 should work, it will just operate at 1333 speed, is it the same with 2133?
View 9 Replies
View Related
Feb 12, 2012
I bought a scythe fan for my case to go on the side, i've tried plugging the 3 pin connector into the PWR_FAN(3 pin) and CHASIS_FAN(4 pin), it gets detected in the bios and in speedfan, and various other software to monitor the fans.
Its running at 3,000 RPM which is way to loud for me, i've tried ASUS AI suite, amd overdrive, speedfan ect to try and turn down the RPM but none of them effect it, its going at 100% non stop and wont slow down no matter what, and even in the bios when i selected 'silent' mode it did not budge in speed at all.
Mobo: ASUS M4A87TD EVO AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard
Fan: Scythe DFS123812-3000 "ULTRA KAZE" 120 x 38 mm Case Fan
Anything i can do to make this software or bios adjust the fan to the correct speeds? If i bought a hardware fan speed controller would that work? I was looking at something simple like this: Newegg.com - Sunbeam PL-RS-PCI Rheosmart PCI 20W Fan Controller
But i'd rather not buy if my Mobo or some software can adjust the speed for me.
View 2 Replies
View Related
May 20, 2012
Am planning a new build and the Asus P8Z77-V board is cheaper by $40 than the Asus P8Z77-V Pro but has 8 phase power as opposed to the Pro with 12 phase power.Now I have done a quick Google and there are refs to this but could someone put it in plain / basic wording as there are some refs to CPU power supply, vdroop, and other tech stuff that I don't really understand??I intend running an i5 3570K and have try at over clocking - if that has any relevance for what my query is about.
View 4 Replies
View Related
Nov 27, 2012
recently i bought a new mobo and CPU. now that everything is installed its telling me i have 16GB of ram installed, but only 8GB are usable.... here is my new processor, AMD FX-8350 Vishera 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor here is the new mobo..ASUS SABERTOOTH 990FX R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS?G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory its the same type of ram i have now.. i'm noticing that on the mobo, unlike my old mobo, the slots are different ----alternating---- colors.. where my old board the colors were paired together.... should i be placing the ram in a certain way?
View 1 Replies
View Related
Jan 4, 2010
I have the above mobo, just installed windows 7 64bit. Everything else is fine but I cannot get the sound to work even though when I test or play music I see the bar rise and fall. I have exhausted everything I know to do. I did see the CM6501 thread here but after trying the drivers, it still does not work and when I click the CM6501 icon, it freezes the PC and I have to reboot.
Any ideas?
CM6501 integrated USB soundcard.
View 1 Replies
View Related
Jan 24, 2012
In a few days I will be upgrading from my AMD 965 Black and Gigabyte GA-870A-UD3 to an Intel i5 2500k and GIGABYTE GA-Z68XP-UD4. I was curious as to what you all thought I could do to minimize effort and problems restoring my system settings, programs, and data files after a clean install of Windows 7.I currently have 3 HDDs; A 640GB for my OS (C: ), a 1TB for Programs and User files (D: ) (Pics, Docs, DVDs, etc.), and a 500GB (E: ) for Win7 backups. I also have a NAS (\NAS) with 500GB. At this point I have good User File backups on E: and am now creating IFW drive images of C: and D: onto the NAS. I have also generated reports from SIW (Hardware, Software, and Network) and Win7's System Settings from the Advanced Tools control panel.
View 5 Replies
View Related
Jan 3, 2013
Today I built my new rig (specs below) and I kept the hard drive off my old gateway to save some coin. After I installed all the new hardware I turned it on and the ASrock screen popped up and prompted me to choose instant flash, select boot order, enter BIOS, and switch screen. When windows 7 attempts to load it stops while the dots are floating towards the center. The windows repair tool didn't help what-so-ever (go figure >.> ) and the PC won't/can't run in safe mode. I updated the BIOS from the ASrock website but that didn't help. I've tried all of the options provided and none worked. I don't want to format my drive and lose my data but I will if I must because I may have access to a new copy of Windows 7.
Corsair cx500
WD green 1TB
Sapphire 7950 3gb
Cooler master elite 430 mid case
ASrock 770iCafe ATX motherboard
AMD FX 6100
Basic RAM (6GB) (x2 2GB, x2 1GB)
Hyper 212 evo
View 12 Replies
View Related
