I'm looking to upgrade my CPU and Motherboard from what I currently have.I recently purchased a GeForce GTX 680 but I am seeing minimal improvement from my previous GeForce GTX 480, and have come to the conclusion its my CPU holding me back.
Current specs -
OS - Windows 7 Home
CPU - Intel i7 930 @ 2.80GHz
Motherboard - Gigabyte X58A-UD5
I have been told in the past I cannot replace one and not the other due to my CPU/Motherboard being 1366 pin which is no longer in make.
The windows 7 Home premium 64-bit currently installed is upgraded from vista. The upgrade key and disk are available as well as in the HD. The current goal is to upgrade from an Q8300 to a i5-2500K, with the appropriate mobo (asus P8P67 M-Pro) and ram (8gb ddr3 g.skill 1333), what are the necessary steps/advice when doing so w/o purchasing a new OS?
I just got a new mobo and CPU and was wondering if I will need to reinstall windows with this. I have read different things, some said you can just repair others say complete reinstall.
low computer knowledge person here and I have recently come into a problem after replacing my mobo/processor/gpu from my old computer. After hooking up the computer and booting it up, it hits the mobo screen then quickly goes into the black screen that says that windows 7 can not be started and gives me the two choices of system startup restore and start windows normally.
Starting windows normally unfortunately returns me to the black screen and so I tried out the restore but to no avail it was unable to fix my problem.Also, I was stupid enough to not transfer any files from my hard drive off to a backup.
My two questions are if it's possible for me to put my hard drive in a friends computer and take the files off there and also if there is any way to fix my hard drive after changing motherboards.
I just built my PC (first one, sounded like a good idea at the time) and was told that getting the latest drivers would "fix" this issue. Problem is, I haven't had a PC or really been on the net since 2001, (don't laugh) so.....I don't know how to get the "right" ones. I realize that i've built something waaaayyy over my head/experience level, so now I just want to learn all that I can.
OEM pc MOBO died, replaced MOBO, windows having trouble booting (expected). attempting repair with no results but FAIL. I am noobish, so I ask, what can I use to help the repair process? PS: I upgraded my OS out of the box From win 7 home premium OEM install, to Windows 7 Ultimate x64 via disk. I also have win 7 premium (full) on disk from another PC i installed it too. I would do a clean install, but I can't lose any of my photos and data.
I have an asrock 775dual-VSTA and I recently upgraded to Windows 7 Ultimate, 32bit.
Things seemed fine, but I realized my USB was performing very slowly.
For example, it takes hours and hours just to upload a few albums to my iPod.
I presume it's a motherboard driver problem. Does anyone know of a fix for this? I dont see any Windows 7 drivers from Asrock for this Mobo.
Im *really* hoping I dont have to buy a new one.
Here are some screenshots from my Device Manager. As you can see, USB seems to be fine, but there are those unknown devices that I have no idea what they are. As far as I can tell, everything is working fine except the USB speed so I presume these unknown devices are related?
If device manager is happy that Windows 7 has managed to find drivers for everything automatically, would the team recommend leaving well alone or going for the mobo vendors drivers?
(I ask because all was well until I installed the Asus Windows 7 drivers for my P5Q...)
- ASUS M4N68T-M LE V2 MoBo - Processor is AMD phenom II X4 965 Black Edition. - One Stick of 2Gb memory DDR 3 - ATI Radeon 6870 Sapphire.
If I restart my system (and this happens like out of 100 restarts 97 times) the system would be on the black post screen and say that the CPU is not compatible with my mobo. Then in order to resolve this I have to got to BIOs and turn on all the cpu cores and the unleashing mode under CPU and restart. Then it would reflect that all the **4 cores are active** and then it would work fine. But why does this happen after every restart. I thought it was CMOS battery but the date and time and other BIOS settings are fine.
I know that since during a windows installation, certain libraries are installed specifically for certain types of chipsets/cpu's and that an abrupt hardware change can cause failures. I read on an article somewhere that you can migrate windows without hardware errors if you manage to get windows to operate on a politically correct mode similar safe mode to boot up with minimal functionality before installing the appropriate drivers for the new board.
ok, sounds like a stupid question, i know, but if i purchase them by ende of tomarrow i get 25% off, and i plan on upgrading mobo soon. i have been generaly informed on another post that 1600 in 1333 should work, it will just operate at 1333 speed, is it the same with 2133?
I bought a scythe fan for my case to go on the side, i've tried plugging the 3 pin connector into the PWR_FAN(3 pin) and CHASIS_FAN(4 pin), it gets detected in the bios and in speedfan, and various other software to monitor the fans.
Its running at 3,000 RPM which is way to loud for me, i've tried ASUS AI suite, amd overdrive, speedfan ect to try and turn down the RPM but none of them effect it, its going at 100% non stop and wont slow down no matter what, and even in the bios when i selected 'silent' mode it did not budge in speed at all.
Mobo: ASUS M4A87TD EVO AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard Fan: Scythe DFS123812-3000 "ULTRA KAZE" 120 x 38 mm Case Fan
Anything i can do to make this software or bios adjust the fan to the correct speeds? If i bought a hardware fan speed controller would that work? I was looking at something simple like this: Newegg.com - Sunbeam PL-RS-PCI Rheosmart PCI 20W Fan Controller
But i'd rather not buy if my Mobo or some software can adjust the speed for me.
Am planning a new build and the Asus P8Z77-V board is cheaper by $40 than the Asus P8Z77-V Pro but has 8 phase power as opposed to the Pro with 12 phase power.Now I have done a quick Google and there are refs to this but could someone put it in plain / basic wording as there are some refs to CPU power supply, vdroop, and other tech stuff that I don't really understand??I intend running an i5 3570K and have try at over clocking - if that has any relevance for what my query is about.
recently i bought a new mobo and CPU. now that everything is installed its telling me i have 16GB of ram installed, but only 8GB are usable.... here is my new processor, AMD FX-8350 Vishera 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor here is the new mobo..ASUS SABERTOOTH 990FX R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS?G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory its the same type of ram i have now.. i'm noticing that on the mobo, unlike my old mobo, the slots are different ----alternating---- colors.. where my old board the colors were paired together.... should i be placing the ram in a certain way?
I have the above mobo, just installed windows 7 64bit. Everything else is fine but I cannot get the sound to work even though when I test or play music I see the bar rise and fall. I have exhausted everything I know to do. I did see the CM6501 thread here but after trying the drivers, it still does not work and when I click the CM6501 icon, it freezes the PC and I have to reboot.
In a few days I will be upgrading from my AMD 965 Black and Gigabyte GA-870A-UD3 to an Intel i5 2500k and GIGABYTE GA-Z68XP-UD4. I was curious as to what you all thought I could do to minimize effort and problems restoring my system settings, programs, and data files after a clean install of Windows 7.I currently have 3 HDDs; A 640GB for my OS (C: ), a 1TB for Programs and User files (D: ) (Pics, Docs, DVDs, etc.), and a 500GB (E: ) for Win7 backups. I also have a NAS (\NAS) with 500GB. At this point I have good User File backups on E: and am now creating IFW drive images of C: and D: onto the NAS. I have also generated reports from SIW (Hardware, Software, and Network) and Win7's System Settings from the Advanced Tools control panel.
Today I built my new rig (specs below) and I kept the hard drive off my old gateway to save some coin. After I installed all the new hardware I turned it on and the ASrock screen popped up and prompted me to choose instant flash, select boot order, enter BIOS, and switch screen. When windows 7 attempts to load it stops while the dots are floating towards the center. The windows repair tool didn't help what-so-ever (go figure >.> ) and the PC won't/can't run in safe mode. I updated the BIOS from the ASrock website but that didn't help. I've tried all of the options provided and none worked. I don't want to format my drive and lose my data but I will if I must because I may have access to a new copy of Windows 7.
Corsair cx500 WD green 1TB Sapphire 7950 3gb Cooler master elite 430 mid case ASrock 770iCafe ATX motherboard AMD FX 6100 Basic RAM (6GB) (x2 2GB, x2 1GB) Hyper 212 evo
Do I insert the CD that came with my PC (which included the original ASUS driver) & install that driver, THEN go to the ASUS site and update the newest driver?
OR is there another/better way.
Oh - did a clean install of win 7 and I do see a Windows.old folder - if this is of any help.
Computer will not sleep after installing a new mobo. It starts initiating sleep mode and the fans and such shut off and the screen goes blank but after a second the fans and everything come back on but the screen stays blank and the only way to get it out of this state is to hold the power button until it shuts off. I checked the BIOS and did not see anything related to sleep mode. Where would a setting for this be located?
I've replaced much of my PC's hardware, mobo/CPU/memory and I want the existing Windows 7 HHD to boot. What's the method? I can't even figure how to install the new mobo drivers without a booted OS.
My motherboard manual says i have a "PCI express" video card slot. but it doesn't say if 1.0 or 2.0 or 3.0. I'm assuming it's 1.0 because the motherboard is a bit old and the video card as well(Nvidia geforce 7300 se/7200 gs) If i'm right and it's a PCI-e 1.0 motherboard, what video card can be compatible with it? 1.0 or 2.0 or 3.0? I want to buy a new video card.
I have a HTPC which includes an ASUS mobo/cpu combo (fanless, smart BIOS, etc). The case is mini ITX with a single case fan. As it is this machine runs really cool since I have no moving parts other than the storage HDD (OS is on SDD).What I ended up doing was move the case fan power plug to the "Chassis1" fan header on the mobo because the BIOS offers more tunability controls for chassis fans than it does the "CPU" fan header.Problem is now, I get popup alerts in my sys tray from the BIOS manager that CPU FAN IS DISABLED or NOT OPERATING.Is there a way I can jumper this power header out with a resistor or something to fake the mobo into thinking it's driving a fan?
i have been told 1155 is going away, but i was told that just under a year ago and its not proving to be true. i just came into a little extra money, and am considering the best mother board i could get my hands on for 1155.
Disassembled a throwaway Compaq CQ60 to repaste the heat sink. The ribbon clamps which pivot down to clamp the keyboard and touchpad ribbon cables into their place are flimsy plastic the size and heft of a fingernail clipping. One popped off and has no way to pop back on that I can see, after trying for an hour. As a result the touchpad won't work.
I don't see how to replace it because it's embedded in mobo. The part doesn't look broken but just won't reattach.
Another surprise is that the HD is loose in its compartment, missing the bracket which secures it into place so it won't slide out of contacts. Owner thinks the Geek Squat replaced it that way.
My system randomly turns off. no blue screen. No crash dump. no windows shutdown screen. This isnt really about the shutdowns.
1 - What happens when the 4pin connector of a 20+4 pin mobo power plug is disconnected
2 - Does the 4pin connector give more stability to a pcie2.0 x16 Graphics Card?
3 - What damage could have been done?
Ive swapped the graphics card out with a Power Color HD4850. The shutoffs happened with both. I have four ram chips. i took out 2 and it still shutoff. Im now trying the other two.
I have replaced my ASUS P8 Z68-V/GEN3 with an Intel Desktop Board DZ77SL-50K and at the same time the primary hard drive has changed from a 1TB Seagate Barracuda to a 3TB Seagate Barracuda. The new system is working fine apart from that the 1TB Seagate Barracuda does not show up in Computer, Disk Management, MiniTools partition management, DiskWizard or anywhere else no matter which SATA cable, SATA port or computer is used. Consequently, I am unable to retrieve any files from the old HDD which is disastrous for my business. How to retrieve any number of files from the unrecognised HDD.
Working on my computer wants to switch out motherboards and see if it could be done without having to reinstall windows 7. Is it possible? Switching from an MSI X58 Platinum SLI to an Asus X58 Sabertooth.
I just started toying with Windows 7 64 bit, and I've hit my first snag (a common one it seems): getting my onboard 7.1 surround to work. Mobo is an Asus P5K Premium WiFi.
At first, before installing any drivers, it worked perfectly fine in the sound test, all 7 speakers. But I can't seem to make Media Player use em, or the one game I've installed, Fallout 3. In both cases, only the 3 fronts work. I'm assuming this is a driver issue, as it works fine in 32bit Vista.
I tried installing the last Vista 64 bit driver, but I get the same results: the configuration/tester app works fine, but only the front speakers work in Fallout 3 and WMP. The driver I used was:
AD1988BBlackHawk_V6100126280JVBWHQL.zip
Any idea if such a driver exists for Windows 7? I found this one in another post (DLing now), but I'm not sure if it's the right one for my mobo:
