Working on my computer wants to switch out motherboards and see if it could be done without having to reinstall windows 7. Is it possible? Switching from an MSI X58 Platinum SLI to an Asus X58 Sabertooth.
View 9 RepliesAfter putting in a second GPU -- which now covers 3 of my Sata ports -- I was forced to switch my drive order around. I was able to boot successfully with 2 of them, but oddly not 3. So I removed my System Reserve drive, setting C: to the active drive, figuring that would clear things up. Then plugged in my 3rd drive into that spot leaving just 2 drives, but windows still does not boot.I checked boot order in BIOS, but I still get boot error.Windows will only boot when I remove the drive leaving only the OS drive.I know a reinstall will solve my problems, but I need to avoid that at all costs.
View 7 Replies View Relatedcann't see hard-disk under command
View 2 Replies View Relatedget windows 7 to switch audio drivers when you switch to another user account.
For eg.. normal speakers device for my personal account and then have my multichannel device (profire 2626) set as default for my other user account 4 studio work.
Atm, if i change it on one account it changes on the other account which is annoying and i'd just like to set default device for each account so i don't have to do this.
OEM pc MOBO died, replaced MOBO, windows having trouble booting (expected). attempting repair with no results but FAIL. I am noobish, so I ask, what can I use to help the repair process? PS: I upgraded my OS out of the box From win 7 home premium OEM install, to Windows 7 Ultimate x64 via disk. I also have win 7 premium (full) on disk from another PC i installed it too. I would do a clean install, but I can't lose any of my photos and data.
View 2 Replies View RelatedToday I built my new rig (specs below) and I kept the hard drive off my old gateway to save some coin. After I installed all the new hardware I turned it on and the ASrock screen popped up and prompted me to choose instant flash, select boot order, enter BIOS, and switch screen. When windows 7 attempts to load it stops while the dots are floating towards the center. The windows repair tool didn't help what-so-ever (go figure >.> ) and the PC won't/can't run in safe mode. I updated the BIOS from the ASrock website but that didn't help. I've tried all of the options provided and none worked. I don't want to format my drive and lose my data but I will if I must because I may have access to a new copy of Windows 7.
Corsair cx500
WD green 1TB
Sapphire 7950 3gb
Cooler master elite 430 mid case
ASrock 770iCafe ATX motherboard
AMD FX 6100
Basic RAM (6GB) (x2 2GB, x2 1GB)
Hyper 212 evo
I've replaced much of my PC's hardware, mobo/CPU/memory and I want the existing Windows 7 HHD to boot. What's the method? I can't even figure how to install the new mobo drivers without a booted OS.
View 14 Replies View RelatedIntel Core i7 3.4 2nd. Gen. Motherboard: Asus P8P67 PRO RAM: 4GB Video: nvidia 9500 GT Audio Card: Omega STriker 7.1 Windows 7 32bits ultimate.However when i install a windows update the sound cracks for a few seconds, why this happens? i mean the processor is fast enough, why the bus still collapses?
View 1 Replies View RelatedIf I bought a new mobo and did a clean re-install of my current OEM 64bit Windows 7,do I need to get a new license or can I just activate it online??
View 6 Replies View RelatedRecently rma'd both cpu and mobo and waiting on the return.Someone at my place of work mentioned that sometimes win7 doesnt like when you change your hardware configurations, like as in,it wont want to boot etc etcBottom line,i did a new build about a month ago,and returned both the mobo AND cpu for the exact same models of each.
View 5 Replies View RelatedI am having to install a new hard drive on a friend's computer. The thing is though, he doesn't have the install disc or even the sticker with his Vista code on it. So I wanted to know if it is possible to install a copy of Windows 7 OEM onto the new hard drive (nothing else in the computer has changed--same mobo, RAM, etc). Is this possible or will the mobo have issues with a new Windows OEM?
View 3 Replies View RelatedI'm trying to install windows 7 again after getting a new Mobo, CPU, and RAM. I'm using a HDD that already has windows on it, but I have to fresh install again. The problem is, whenever I use any kind of W7 disc, it loads the files, gets to the "starting windows" screen, and then re-boots.
Relevant info:
Core i5 2300
AsRock z68 Extreme4 Gen3
2x4GB Patriot Viper 3 1600mhz
WD Caviar blue HDD
Acer OEM DVD player
What I've tried:
New DVD player
New DVD
New RAM
IDE/ACHA modes
New HDD
XP disc (It would work actualy)
What could be:
CPU is bad
Mobo is bad
Somethings not set up right
None of the tested RAM is compatible
I upgraded to a new processor, motherboard, and gpu. I insalled all the new hardware and turned it on. Windows 7 won't/can't load and can't repair. I can't lose the data on the HDD because there's some very important stuff on there.
Sapphire 7950 HD
Corsair cx500
AMD FX 6100
Hyper 212 evo
WD 1TB green
6gb RAM
5 120mm fans
Cooler master 430 elite case
The windows 7 Home premium 64-bit currently installed is upgraded from vista. The upgrade key and disk are available as well as in the HD. The current goal is to upgrade from an Q8300 to a i5-2500K, with the appropriate mobo (asus P8P67 M-Pro) and ram (8gb ddr3 g.skill 1333), what are the necessary steps/advice when doing so w/o purchasing a new OS?
View 2 Replies View RelatedI just assembled a PC with the following specs:
-AMD Phenom II X4
- Mobo Gigabyte GA-880GM-USB3
- 4 GB Kingston DDR3
- Good Quality PSU (Cant remember name)
- 500 GB SATA SEAGATE HD
This machine has been a total pain since I started working on it. Basicaly I cant install Windows 7 64 bits any version (no problems with DVD testesd on other machines beffore). But I could instal any 32 version, I guess there is something on the BIOS that i didnt did.
I have an ASUS P5E-VM HDMI mobo and running Windows 7 Professional. The mobo has a VGA and HDMI and dual monitor capabilities. I have my computer monitor on VGA and my TV on HDMI. When I have both monitor and TV connected, I lose the Windows 7 startup animation. It uses the Vista animation instead. When I have just the computer monitor alone, on VGA or HDMI, the Windows 7 animation comes back. How can I make the Windows 7 be used even if both monitor and TV are connected?
View 9 Replies View RelatedI'm having some performance decrease on my new Build. I bought a new motherboard, Hard Drive and CPU Cooler and had to re-install windows to get my new board to work properly. I've noticed that now in League of Legends my frame rate is around 40-70 when I used to have a constant 150+ even in hectic situations where lots of things were going on at one time. I have the latest AMD Drivers, 13.1. I have tried reverting back to 12.10 to see if its the new version that's causing the problem, but its the same. [code]
View 2 Replies View RelatedI realise there is another SSD thread here but I don't believe it is appropriate to myself.I just bought myself a new SSD which I would like to install 7 onto to use as my boot drive. therefore, i need to clear the Windows install from the HDD that I already have.What is the process for doing this? Do I just pop in the SSD,install windows onto that and then format my HDD afterwards?
View 9 Replies View RelatedI have only one account on my windows 7, and today when i tried to resume windows, i accidently clicked on "switch user" instead of clicking on the user name. Now when i try to turn on my computer, the whole process of turning on Windows repeats all the time but it doesn't want to go to my account.
View 7 Replies View RelatedI am having trouble with my new Fujitsu laptop. I have an onboard GPU (Intel(R) HD Graphics Family) and a non-onboard NVIDIA GeForce GT 525M GPU. I have Windows 7 Home Premium and the latest drivers for my NVIDIA video card. I also obviously have DirectX 11 installed, since I have Win7.Now, the problem is that although Windows detects both GPUs, it uses the Intel one (this was true both before installing the latest NVIDIA driver and before that).I know it's using the Intel one since: 1. If I go to Control Panel->Display->Change display settings->Advanced settings, the Properties window for the Intel GPU pops up; 2. If I go to Intel(R) Graphics and Media Control Panel, under Options and Support->Information Center, it says "Processor Graphics In Use:Intel(R) HD Graphics 3000"; and 3. Graphics quality/performance is way too low for the NVIDIA GPU.I tried disabling the Intel HD thing in Device Manager, but all that happened was that the screen went blank, so I restarted my computer, booted into Safe Mode (the screen wasn't blank there), re-enabled the Intel, and then restarted Windows into normal mode (and obviously I still had the problem with Windows not using the NVIDIA GPU.Also, if I go into NVIDIA Control Panel (click the system tray icon and click "Customize which programs use the GPU"), under "Manage 3D Settings", if I add a game to the list of "programs to customize" (in the Program Settings tab) and then click Apply, the game still behaves as if it was using the Intel on-board GPU (as in, nothing changes in terms of quality and/or performance, regardless of the graphics settings). Also, in the Program Settings tab, under "2. Select the preferred graphics processor for this program", the selected setting is "Use global setting (Auto-select: NVIDIA GPU)" and it doesn't allow me to change that (the drop-down list is greyed out).
View 1 Replies View RelatedI just got a mini notebook with windows 7 starter on it and I can not do much with just starter. I was wondering how do I switch Starter with Professional without the CD because it doesn't have a CD-ROM drive.
View 4 Replies View RelatedI am having trouble with my new Fujitsu laptop. I have an onboard GPU (Intel® HD Graphics Family) and a non-onboard NVIDIA GeForce GT 525M GPU. I have Windows 7 Home Premium (Service Pack 1) and the latest drivers for my NVIDIA video card. I also obviously have DirectX 11 installed, since I have Win7.Now, the problem is that although Windows detects both GPUs, it uses the Intel one (this was true both before installing the latest NVIDIA driver and before that).I know it's using the Intel one since: 1. If I go to Control Panel->Display->Change display settings->Advanced settings, the Properties window for the Intel GPU pops up; 2. If I go to Intel® Graphics and Media Control Panel, under Options and Support->Information Center, it says "Processor Graphics In Use: Intel® HD Graphics 3000"; and 3. Graphics quality/performance is way too low for the NVIDIA GPU.I tried disabling the Intel HD thing in Device Manager, but all that happened was that the screen went blank, so I restarted my computer, booted into Safe Mode (the screen wasn't blank there), re-enabled the Intel, and then restarted Windows into normal mode (and obviously I still had the problem with Windows not using the NVIDIA GPU.Also, if I go into NVIDIA Control Panel (click the system tray icon and click "Customize which programs use the GPU"), under "Manage 3D Settings", if I add a game to the list of "programs to customize" (in the Program Settings tab) and then click Apply, the game still behaves as if it was using the Intel on-board GPU (as in, nothing changes in terms of quality and/or performance, regardless of the graphics settings). Also, in the Program Settings tab, under "2. Select the preferred graphics processor for this program", the selected setting is "Use global setting (Auto-select: NVIDIA GPU)" and it doesn't allow me to change that (the drop-down list is greyed out).
View 5 Replies View RelatedI just ordered an SSD and will be migrating my Windows 7 64 install over to it. Most people seem to say I should do a fresh install instead of cloning the old drive. Currently my OS is on a partition on my HDD, while the rest of my files reside on a different partition on the same drive.
Where this gets slightly trickier is that my version of Windows 7 is an upgrade edition. From what I remember reading before my initial install, the installer is much happier and the process is much smoother if it can detect an existing Windows installation somewhere on the system. But on the other hand, everyone seems to advise disconnecting all drives but the SSD when installing (to avoid having the boot loader install on the wrong drive?).
I can't have it both ways. The closest I've found to someone with my same dilemma is here: Upgrade Installation - To new SSD From XP
It sounds like in the end he had to do the reinstall workaround (install Windows 7 again over the invalidated installation).
I am using Win 7 for a while (came pre-installed with laptop). Now it's time to have Win 7 (x64) installed on personal desktop as well.I just a have a specific question related to BIOS. Hope to avoid unnecessary delays/problems this way.
View 2 Replies View Relatedi have made the jump from mac osx which i have used since windows 98 second edition!) as a result i am behind quite a bit and wanted to know recommended apps for general productivity and pc use.
here are my system specs
i7-870
gigabyte p55 ud3
4gb corsair dominator ddr3 1333
sapphire radeon 4870 1gb
1tb samsung spinpoint f3
(going to purchase a vertex 3 ssd when i becomes available for the sata 6)
ultra 600 watt psu
haf-x case
im moving up from a 2ghz core due macbook white so i am making a big upgrade
I am using windows vista 32-bit SP2 home premium. I want to switch my operating system to 64 bit because I will be using the computer for digital painting, and the colors are said to be better on a 64-bit system. I have no idea how to switch operating systems, do you delete all your data in the process or is it like installing installing a new software?My current computer has 4 gigabytes of ram. The processor is Intel Core quad 2 Q8300 2.50GHz.so, I read that Linux is free and is as good as windows. Is this true?
View 9 Replies View RelatedI installed windows 7 while my satas were set to ide mode in the bios. My old HP computer had them set to raid. I have run into this odd issue where I installed windows in ide mode on my HDD but now windows wont show my SSD(which i got for games) when I right click the C drive it shows the SSD as being part of the HDD. Even in my Bios it shows my main drive as my OCZ SSD. Anyways would switching to raid mode and then doing a windows repair fix anything? Or should i just switch it to raid mode unhook the SSD and then re install windows on my HDD(Which I have no problem doing but would like to avoid if possible)
View 2 Replies View RelatedI have some questions about window 7. I want to switch two hard drives from a different computers; one mechanical and one ssd. The problem is they both have window 7 os 64 bit oem editions. Is there any legal way for me to accomplish this? And if a an alternate universe me does it regardless, what is the potential consequences it might face?
View 1 Replies View RelatedAfter recently switching to Windows 7 from xp after doing a reformatting on my hard drive, text and pictures look blurry and hard to read. I have gotten all the drivers for my monitor and video card as well. My current resolution is 1680x1050 and is the native resolution for my monitor. I honestly have no idea what happened since I've never had these problems on xp before.
View 2 Replies View RelatedSo when I do speedtest and select nearest host, I usually get 3 ping and (average) 75mbps. After installing windows 7, I recently found out that ping result always is 50, and download speed capped to like 55mbps.Also, I pinged a game I play with command prompt, I get about 165ms averagely on XP, and after Windows 7, it went up to 189-192.
View 1 Replies View RelatedMy current PC is running 32 bit windows 7 with amd mobo and cpu, the new pc I'm moving the HDD to will be all intel and im also planning on switching to 64 bit windows.
View 7 Replies View Related