Switching Sata Mode For Windows 7?
Feb 3, 2012
I installed windows 7 while my satas were set to ide mode in the bios. My old HP computer had them set to raid. I have run into this odd issue where I installed windows in ide mode on my HDD but now windows wont show my SSD(which i got for games) when I right click the C drive it shows the SSD as being part of the HDD. Even in my Bios it shows my main drive as my OCZ SSD. Anyways would switching to raid mode and then doing a windows repair fix anything? Or should i just switch it to raid mode unhook the SSD and then re install windows on my HDD(Which I have no problem doing but would like to avoid if possible)
View 2 Replies
ADVERTISEMENT
Jan 15, 2013
Not wanting to use dual-booting - will I have problems switching SATA connections to run Win 7 Pro from a recently installed SSD and then from a HDD? This until I am satisfied with the transition to the SSD.
View 5 Replies
View Related
Mar 30, 2012
I just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
View 8 Replies
View Related
Aug 29, 2011
After putting in a second GPU -- which now covers 3 of my Sata ports -- I was forced to switch my drive order around. I was able to boot successfully with 2 of them, but oddly not 3. So I removed my System Reserve drive, setting C: to the active drive, figuring that would clear things up. Then plugged in my 3rd drive into that spot leaving just 2 drives, but windows still does not boot.I checked boot order in BIOS, but I still get boot error.Windows will only boot when I remove the drive leaving only the OS drive.I know a reinstall will solve my problems, but I need to avoid that at all costs.
View 7 Replies
View Related
Jul 14, 2010
Well, I've done a lot of research (googling) on whether or not to install Windows 7 on my solid state drive in AHCI or IDE sata mode. I wanted to confirm it with you guys to make sure I got this straight before I go ahead and install Windows 7.
If I install windows 7 on my solid state drive in sata mode ahci then later I can go to IDE if I wanted to by just switching it in bios. But if I install windows 7 under IDE mode then ill have to do a registry value change to make windows 7 work in ahci mode.
Everyone seems to have a different opinion on whether or not ahci mode is faster or worth it over IDE mode for windows 7 on a SSD. I'm not all that interested in hot swapping so thats not a interesting feature for me. I'm looking for reliability as a top priority.
View 7 Replies
View Related
Aug 10, 2010
I'm trying to add 3 additional HDs to my system for storage, using RAID 5 configuration. However, when I set the PCH SATA Control Mode option to RAID(XHD) (in order to enable the motherboard RAID controller) in my BIOS, I get BSOD for a milisecond during the windows 7 loading and then the PC is restarted automatically.
My system spec:
Intel CPU i7 2.66MHz, 8GB RAM DDR3 1333MHz
GigaByte's Motherboard - GA-P55A-UD3
1 x WD3000HLFS-60G6U2 ATA Device (1x300GB)
3 x ST3500418AS ATA Device (3x500GB)
1 x HL-DT-ST DVD-RAM GH40L ATA Device
Windows 7 Ultimate, 64bit
Drives connection configurations:
SATA2_0: ST3500418AS
SATA2_1: ST3500418AS
SATA2_2: ST3500418AS
SATA2_3: N.C.
SATA2_4: DVD-RAM
SATA2_5: WD3000HLFS (System HD)
GSATA3_6: N.C.
GSATA3_7: N.C.
View 5 Replies
View Related
Jan 17, 2013
this is a common and good business machine: HP DC5800 SFF, processor E8400 dual core.all I'm trying to do is make sure sata is in native mode before fresh install of Ultimate x64. I have two other older DC-series and don't have the same setup screens [at least not identical]. no issues with those.the BIOS 786f2 v01.51.if not, anyone know what the defaults are for sata devices? I'm stumped. in fact, I can't even find a real bios file on the normally-competent hp support site.... rather what I find are replication utilities. If I were to flash the bios I would need to do it via usb... but can't find a real bios file?
View 5 Replies
View Related
Oct 18, 2011
I'm installing Seven on a WinXP machine and completed the install, but forgot to change the SATA setting in the bios from "compatibility mode" to AHCI. Now when I change it, windows gives me bluescreen on boot.I'm dumbfounded that Windows Seven startup repair can't fix a problem this simple, but it completely failed, wasn't even able to find a problem.I was thinking it might be easier to just reformat and begin the install over again, or startup in safemode and install the intel SATA drivers... assuming it will let me boot into safemode with AHCI enabled.ps. On the other computer (different thread), I'm going to wait till I have several hours of uninterrupted time, in case I need to begin over installing all the windows versions one at a time. I'll reply with any success/failure on that thread later in the week.
View 4 Replies
View Related
Jul 13, 2012
I own a lenovo thinkpad and recently all of a sudden i recieved this messg where it says mediatest failed, check cable, the solutions stated i change my SATA controller to compatible mode from AHCI to IDE most perferably. Id like to know step by step how i can do it myself.
View 1 Replies
View Related
Apr 30, 2011
A strange problem, nothing critical, but I found it annoying that my optical sata drives will not boot from a bootable disk when in AHCI mode in Bios. If I switch the drive mode to native IDE then I can boot just fine from either of the Opitcal Sata drives.I have done some searching and found this has been a problem out for some builds/MB in the past but you would think with a new MB and Sata controller and such this would no longer be a problem.If you look at my specs you will see the Gigabyte MB. The documentation is fuzzy on the sata ports. There is a setting to put SATA port 4/5 into some kind of IDE support mode. I currently have the slots 0 - 3, used for all the drives. 0 & 1 for HDD, and 2 & 3 for the optical drives,wondering if I use the 4/5 slots for the SATA and set the bios to the 4/5 ide support if this might solve my little problem.
View 9 Replies
View Related
Oct 11, 2011
get windows 7 to switch audio drivers when you switch to another user account.
For eg.. normal speakers device for my personal account and then have my multichannel device (profire 2626) set as default for my other user account 4 studio work.
Atm, if i change it on one account it changes on the other account which is annoying and i'd just like to set default device for each account so i don't have to do this.
View 2 Replies
View Related
Aug 10, 2010
Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
View 9 Replies
View Related
Jun 27, 2012
Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application for such a job plus, it is extremely fast.Anyway, while he was diagnosing my boot-up issue he discovered I had a malfunctioning network card; while removing this, he noticed all the SATA settings were set to SATA 2.When he reset these to SATA 3, the PC would not start-up! When he set them again to SATA 2 there was no problem and it worked fine?
View 9 Replies
View Related
Aug 10, 2011
i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies
View Related
May 7, 2011
i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies
View Related
May 22, 2011
My MB supports only SATA 2 but in my city, the HDD SATA 3 is more cheap than SATA 2. If I buy the HDD SATA 3 it will work with my MB SATA 2 controller?
View 5 Replies
View Related
Mar 5, 2012
i'm looking to upgrade from a HDD to SSD. I've been reading online about my board and apparently the marvell 9128 controller sucks speed wise. I was looking at the Corsair Force 3 because of the read/write speeds. Upon doing more digging though it looks like id be better off running a drive on the SATA 2 ports.
View 2 Replies
View Related
Oct 23, 2011
The hard drive in my son's laptop has died, it's a SATA 1 (1.5Gb/s) drive. Can I upgrade it to a SATA 2 (3.0 Gb/s) hard disk?? It's in a Toshiba laptop.
View 7 Replies
View Related
May 18, 2012
I was wondering If I have one sata 1 and an new sata 2(or 3) on my PC installed on my PC will cause problems in transfer speeds? My Blue-ray is sata 1 also.Does this mean that all disks will work as sata 1?
View 2 Replies
View Related
Aug 18, 2010
I realise there is another SSD thread here but I don't believe it is appropriate to myself.I just bought myself a new SSD which I would like to install 7 onto to use as my boot drive. therefore, i need to clear the Windows install from the HDD that I already have.What is the process for doing this? Do I just pop in the SSD,install windows onto that and then format my HDD afterwards?
View 9 Replies
View Related
Feb 15, 2013
I have only one account on my windows 7, and today when i tried to resume windows, i accidently clicked on "switch user" instead of clicking on the user name. Now when i try to turn on my computer, the whole process of turning on Windows repeats all the time but it doesn't want to go to my account.
View 7 Replies
View Related
Sep 10, 2011
I am having trouble with my new Fujitsu laptop. I have an onboard GPU (Intel(R) HD Graphics Family) and a non-onboard NVIDIA GeForce GT 525M GPU. I have Windows 7 Home Premium and the latest drivers for my NVIDIA video card. I also obviously have DirectX 11 installed, since I have Win7.Now, the problem is that although Windows detects both GPUs, it uses the Intel one (this was true both before installing the latest NVIDIA driver and before that).I know it's using the Intel one since: 1. If I go to Control Panel->Display->Change display settings->Advanced settings, the Properties window for the Intel GPU pops up; 2. If I go to Intel(R) Graphics and Media Control Panel, under Options and Support->Information Center, it says "Processor Graphics In Use:Intel(R) HD Graphics 3000"; and 3. Graphics quality/performance is way too low for the NVIDIA GPU.I tried disabling the Intel HD thing in Device Manager, but all that happened was that the screen went blank, so I restarted my computer, booted into Safe Mode (the screen wasn't blank there), re-enabled the Intel, and then restarted Windows into normal mode (and obviously I still had the problem with Windows not using the NVIDIA GPU.Also, if I go into NVIDIA Control Panel (click the system tray icon and click "Customize which programs use the GPU"), under "Manage 3D Settings", if I add a game to the list of "programs to customize" (in the Program Settings tab) and then click Apply, the game still behaves as if it was using the Intel on-board GPU (as in, nothing changes in terms of quality and/or performance, regardless of the graphics settings). Also, in the Program Settings tab, under "2. Select the preferred graphics processor for this program", the selected setting is "Use global setting (Auto-select: NVIDIA GPU)" and it doesn't allow me to change that (the drop-down list is greyed out).
View 1 Replies
View Related
Jun 20, 2011
I just got a mini notebook with windows 7 starter on it and I can not do much with just starter. I was wondering how do I switch Starter with Professional without the CD because it doesn't have a CD-ROM drive.
View 4 Replies
View Related
Sep 10, 2011
I am having trouble with my new Fujitsu laptop. I have an onboard GPU (Intel® HD Graphics Family) and a non-onboard NVIDIA GeForce GT 525M GPU. I have Windows 7 Home Premium (Service Pack 1) and the latest drivers for my NVIDIA video card. I also obviously have DirectX 11 installed, since I have Win7.Now, the problem is that although Windows detects both GPUs, it uses the Intel one (this was true both before installing the latest NVIDIA driver and before that).I know it's using the Intel one since: 1. If I go to Control Panel->Display->Change display settings->Advanced settings, the Properties window for the Intel GPU pops up; 2. If I go to Intel® Graphics and Media Control Panel, under Options and Support->Information Center, it says "Processor Graphics In Use: Intel® HD Graphics 3000"; and 3. Graphics quality/performance is way too low for the NVIDIA GPU.I tried disabling the Intel HD thing in Device Manager, but all that happened was that the screen went blank, so I restarted my computer, booted into Safe Mode (the screen wasn't blank there), re-enabled the Intel, and then restarted Windows into normal mode (and obviously I still had the problem with Windows not using the NVIDIA GPU.Also, if I go into NVIDIA Control Panel (click the system tray icon and click "Customize which programs use the GPU"), under "Manage 3D Settings", if I add a game to the list of "programs to customize" (in the Program Settings tab) and then click Apply, the game still behaves as if it was using the Intel on-board GPU (as in, nothing changes in terms of quality and/or performance, regardless of the graphics settings). Also, in the Program Settings tab, under "2. Select the preferred graphics processor for this program", the selected setting is "Use global setting (Auto-select: NVIDIA GPU)" and it doesn't allow me to change that (the drop-down list is greyed out).
View 5 Replies
View Related
Sep 19, 2011
Working on my computer wants to switch out motherboards and see if it could be done without having to reinstall windows 7. Is it possible? Switching from an MSI X58 Platinum SLI to an Asus X58 Sabertooth.
View 9 Replies
View Related
Nov 26, 2011
I just ordered an SSD and will be migrating my Windows 7 64 install over to it. Most people seem to say I should do a fresh install instead of cloning the old drive. Currently my OS is on a partition on my HDD, while the rest of my files reside on a different partition on the same drive.
Where this gets slightly trickier is that my version of Windows 7 is an upgrade edition. From what I remember reading before my initial install, the installer is much happier and the process is much smoother if it can detect an existing Windows installation somewhere on the system. But on the other hand, everyone seems to advise disconnecting all drives but the SSD when installing (to avoid having the boot loader install on the wrong drive?).
I can't have it both ways. The closest I've found to someone with my same dilemma is here: Upgrade Installation - To new SSD From XP
It sounds like in the end he had to do the reinstall workaround (install Windows 7 again over the invalidated installation).
View 3 Replies
View Related
Dec 23, 2011
I am using Win 7 for a while (came pre-installed with laptop). Now it's time to have Win 7 (x64) installed on personal desktop as well.I just a have a specific question related to BIOS. Hope to avoid unnecessary delays/problems this way.
View 2 Replies
View Related
Mar 4, 2011
i have made the jump from mac osx which i have used since windows 98 second edition!) as a result i am behind quite a bit and wanted to know recommended apps for general productivity and pc use.
here are my system specs
i7-870
gigabyte p55 ud3
4gb corsair dominator ddr3 1333
sapphire radeon 4870 1gb
1tb samsung spinpoint f3
(going to purchase a vertex 3 ssd when i becomes available for the sata 6)
ultra 600 watt psu
haf-x case
im moving up from a 2ghz core due macbook white so i am making a big upgrade
View 1 Replies
View Related
Apr 18, 2011
I am using windows vista 32-bit SP2 home premium. I want to switch my operating system to 64 bit because I will be using the computer for digital painting, and the colors are said to be better on a 64-bit system. I have no idea how to switch operating systems, do you delete all your data in the process or is it like installing installing a new software?My current computer has 4 gigabytes of ram. The processor is Intel Core quad 2 Q8300 2.50GHz.so, I read that Linux is free and is as good as windows. Is this true?
View 9 Replies
View Related
Nov 13, 2012
I have some questions about window 7. I want to switch two hard drives from a different computers; one mechanical and one ssd. The problem is they both have window 7 os 64 bit oem editions. Is there any legal way for me to accomplish this? And if a an alternate universe me does it regardless, what is the potential consequences it might face?
View 1 Replies
View Related
Jan 1, 2013
After recently switching to Windows 7 from xp after doing a reformatting on my hard drive, text and pictures look blurry and hard to read. I have gotten all the drivers for my monitor and video card as well. My current resolution is 1680x1050 and is the native resolution for my monitor. I honestly have no idea what happened since I've never had these problems on xp before.
View 2 Replies
View Related
