Switching From On-board GPU To NVIDIA GPU On Windows 7?
Sep 10, 2011
I am having trouble with my new Fujitsu laptop. I have an onboard GPU (Intel(R) HD Graphics Family) and a non-onboard NVIDIA GeForce GT 525M GPU. I have Windows 7 Home Premium and the latest drivers for my NVIDIA video card. I also obviously have DirectX 11 installed, since I have Win7.Now, the problem is that although Windows detects both GPUs, it uses the Intel one (this was true both before installing the latest NVIDIA driver and before that).I know it's using the Intel one since: 1. If I go to Control Panel->Display->Change display settings->Advanced settings, the Properties window for the Intel GPU pops up; 2. If I go to Intel(R) Graphics and Media Control Panel, under Options and Support->Information Center, it says "Processor Graphics In Use:Intel(R) HD Graphics 3000"; and 3. Graphics quality/performance is way too low for the NVIDIA GPU.I tried disabling the Intel HD thing in Device Manager, but all that happened was that the screen went blank, so I restarted my computer, booted into Safe Mode (the screen wasn't blank there), re-enabled the Intel, and then restarted Windows into normal mode (and obviously I still had the problem with Windows not using the NVIDIA GPU.Also, if I go into NVIDIA Control Panel (click the system tray icon and click "Customize which programs use the GPU"), under "Manage 3D Settings", if I add a game to the list of "programs to customize" (in the Program Settings tab) and then click Apply, the game still behaves as if it was using the Intel on-board GPU (as in, nothing changes in terms of quality and/or performance, regardless of the graphics settings). Also, in the Program Settings tab, under "2. Select the preferred graphics processor for this program", the selected setting is "Use global setting (Auto-select: NVIDIA GPU)" and it doesn't allow me to change that (the drop-down list is greyed out).
I am having trouble with my new Fujitsu laptop. I have an onboard GPU (Intel® HD Graphics Family) and a non-onboard NVIDIA GeForce GT 525M GPU. I have Windows 7 Home Premium (Service Pack 1) and the latest drivers for my NVIDIA video card. I also obviously have DirectX 11 installed, since I have Win7.Now, the problem is that although Windows detects both GPUs, it uses the Intel one (this was true both before installing the latest NVIDIA driver and before that).I know it's using the Intel one since: 1. If I go to Control Panel->Display->Change display settings->Advanced settings, the Properties window for the Intel GPU pops up; 2. If I go to Intel® Graphics and Media Control Panel, under Options and Support->Information Center, it says "Processor Graphics In Use: Intel® HD Graphics 3000"; and 3. Graphics quality/performance is way too low for the NVIDIA GPU.I tried disabling the Intel HD thing in Device Manager, but all that happened was that the screen went blank, so I restarted my computer, booted into Safe Mode (the screen wasn't blank there), re-enabled the Intel, and then restarted Windows into normal mode (and obviously I still had the problem with Windows not using the NVIDIA GPU.Also, if I go into NVIDIA Control Panel (click the system tray icon and click "Customize which programs use the GPU"), under "Manage 3D Settings", if I add a game to the list of "programs to customize" (in the Program Settings tab) and then click Apply, the game still behaves as if it was using the Intel on-board GPU (as in, nothing changes in terms of quality and/or performance, regardless of the graphics settings). Also, in the Program Settings tab, under "2. Select the preferred graphics processor for this program", the selected setting is "Use global setting (Auto-select: NVIDIA GPU)" and it doesn't allow me to change that (the drop-down list is greyed out).
I have heard that maybe some versions of Windows 7, such as Starter or Home Basic, will not permit the automatic switching to a stand alone graphic card (Nvidia or ATI Radeon).
I wish to find out if this is correct and if so, which versions are restricted? I use Photoshop and play HD video files up to 2GB in size, so I want to ensure switching is performed for improved graphical performance. Based on this finding, I can then decide what O/S to buy with a new laptop I'm about to purchase.
trying to fix the problem with installing my Gigabyte Nvidia GTX560 256 bit graphic card ?Replaced old power supply 500watt with a 850watt gaming power supply? and still can not install the drivers.Took it to a IT company and tested the card, all ok. placed the card into a other PC, running ok ?IT company said the MSi board is not compatible to the graphic card?
PC Spec's Intell i3 3.3ghz processor 4 gig ram 850 watt power supply
get windows 7 to switch audio drivers when you switch to another user account.
For eg.. normal speakers device for my personal account and then have my multichannel device (profire 2626) set as default for my other user account 4 studio work.
Atm, if i change it on one account it changes on the other account which is annoying and i'd just like to set default device for each account so i don't have to do this.
I just recently installed a new motherboard in my min hp home pc when i put my hard drive in its see a problem with configuration iam assuming it has something to do with the mac address on the new board the old board does not work thus why i replaced it is there any way i can save the information on my old drive if i reload windows 7 or iam i doomed because of windows 7 licencing to a mac address
I cant install windows 7 on my ASUS P5NSLI, I have seen post where users were able to install the O.S..... but every time I install the software I get an unresponsive screen.... when the O.S is being installed?
I got motherboard: Asus m2n-mx se plus. Video Card : nVIDIA nForce 6150SE (6100-430), Onboard Audio : nVIDIA MCP61 , D-Link DFE-520TX PCI Fast Ethernet Adapter .
My Motherboard comes with Vista drivers, but I heard that even that are creating problems for video and audio. Should I download any specific drivers beforehand?
Basically i cannot get video driver to install. It's a fresh install of windows7 64bit on an older computer (Athlon 3700+, 939, HP a1310n), onboard video is ati x300. It's not supported by win7, so I installed the legacy vista drivers (both 9.3 and 10.2) without any luck (wouldn't even install). Aside from windows 7 updates I have not installed anything whatsoever on this computer, including bios drivers (again, not supported by win7). I wanted to install win xp but that's a whole other story (after a couple failed installs, XP stopped accepting my cd-key so I admitted defeat...). He only wants to use the computer to watch movies and online videos. He also gave me an external card (x1650), but computer did not recognize it at all, so onboard video it is. Also, lol, his dvd drive wasn't reading any discs, so I found an old IDE I had and switched it and it worked fine. Funny this is, he only recently had another friend put win7 32bit on it so it must have been working recently, seems odd to 'suddenly' stop responding.I know 64bit is a little slow for this computer, but from a 'cold' start, this has an internet page open in 65 seconds from post! Not too terrible... 32 bit ran quick, but that's no longer an option as all i have is 64 bit
i need to update my sound card drivers.... i am on windows 7 and went to the biostar website to update my on board audio drivers and there was nothing available for windows 7.... only vista,xp, etc.
I am building two servers with identical hardware ... Intel S5520HCT mother board, dual Xeon E5607 2.26GHz, Seagate SATA 2TB drive, 8GB Crucial memory and OCZ Agility SSD drives. I am using the onboard video and motherboard has been update with the latest BIOS.
But when I install Windows 7 Pro 64 to 50GB partition on the SATA drive, or to a single partition SSD ... the system hangs after the final reboot right after "Updating Registry" and "Starting Services" during the "Completing Installation" phase. The next input should be username and computer name ... but it never gets to that.
I have minimum hardware attached ... disabled networking in BIOS ... and tried with a number of different memory configurations ... etc .. etc ... but still the same result .. and I am now totally clueless. I even tested all my hardware on a Tyan S7025 board ... and there it installs without any issues.
I recently rebuilt my pc with a gigabyte ga h77m d3h and core i3 2120 with 512m dedicated to on board graphics. The computer will start fine after you do the fresh install of windows 7 prof. 64 bit with the default video driver from windows. I've updated my bios using gigabyte's @bios tool and I've tried installing th drivers from the disc, from intel's website and with automatic update in device manager. Could a corrupt windows install file cause this issue? I downloaded the ISO from the Microsoft website when I bought the product key.
I realise there is another SSD thread here but I don't believe it is appropriate to myself.I just bought myself a new SSD which I would like to install 7 onto to use as my boot drive. therefore, i need to clear the Windows install from the HDD that I already have.What is the process for doing this? Do I just pop in the SSD,install windows onto that and then format my HDD afterwards?
I have only one account on my windows 7, and today when i tried to resume windows, i accidently clicked on "switch user" instead of clicking on the user name. Now when i try to turn on my computer, the whole process of turning on Windows repeats all the time but it doesn't want to go to my account.
I just got a mini notebook with windows 7 starter on it and I can not do much with just starter. I was wondering how do I switch Starter with Professional without the CD because it doesn't have a CD-ROM drive.
Working on my computer wants to switch out motherboards and see if it could be done without having to reinstall windows 7. Is it possible? Switching from an MSI X58 Platinum SLI to an Asus X58 Sabertooth.
I just ordered an SSD and will be migrating my Windows 7 64 install over to it. Most people seem to say I should do a fresh install instead of cloning the old drive. Currently my OS is on a partition on my HDD, while the rest of my files reside on a different partition on the same drive.
Where this gets slightly trickier is that my version of Windows 7 is an upgrade edition. From what I remember reading before my initial install, the installer is much happier and the process is much smoother if it can detect an existing Windows installation somewhere on the system. But on the other hand, everyone seems to advise disconnecting all drives but the SSD when installing (to avoid having the boot loader install on the wrong drive?).
I can't have it both ways. The closest I've found to someone with my same dilemma is here: Upgrade Installation - To new SSD From XP
It sounds like in the end he had to do the reinstall workaround (install Windows 7 again over the invalidated installation).
I am using Win 7 for a while (came pre-installed with laptop). Now it's time to have Win 7 (x64) installed on personal desktop as well.I just a have a specific question related to BIOS. Hope to avoid unnecessary delays/problems this way.
i have made the jump from mac osx which i have used since windows 98 second edition!) as a result i am behind quite a bit and wanted to know recommended apps for general productivity and pc use.
here are my system specs i7-870 gigabyte p55 ud3 4gb corsair dominator ddr3 1333 sapphire radeon 4870 1gb 1tb samsung spinpoint f3 (going to purchase a vertex 3 ssd when i becomes available for the sata 6) ultra 600 watt psu haf-x case
im moving up from a 2ghz core due macbook white so i am making a big upgrade
I am using windows vista 32-bit SP2 home premium. I want to switch my operating system to 64 bit because I will be using the computer for digital painting, and the colors are said to be better on a 64-bit system. I have no idea how to switch operating systems, do you delete all your data in the process or is it like installing installing a new software?My current computer has 4 gigabytes of ram. The processor is Intel Core quad 2 Q8300 2.50GHz.so, I read that Linux is free and is as good as windows. Is this true?
I installed windows 7 while my satas were set to ide mode in the bios. My old HP computer had them set to raid. I have run into this odd issue where I installed windows in ide mode on my HDD but now windows wont show my SSD(which i got for games) when I right click the C drive it shows the SSD as being part of the HDD. Even in my Bios it shows my main drive as my OCZ SSD. Anyways would switching to raid mode and then doing a windows repair fix anything? Or should i just switch it to raid mode unhook the SSD and then re install windows on my HDD(Which I have no problem doing but would like to avoid if possible)
