No Boot After Switching HDD Sata Order On Mobo?

Aug 29, 2011

After putting in a second GPU -- which now covers 3 of my Sata ports -- I was forced to switch my drive order around. I was able to boot successfully with 2 of them, but oddly not 3. So I removed my System Reserve drive, setting C: to the active drive, figuring that would clear things up. Then plugged in my 3rd drive into that spot leaving just 2 drives, but windows still does not boot.I checked boot order in BIOS, but I still get boot error.Windows will only boot when I remove the drive leaving only the OS drive.I know a reinstall will solve my problems, but I need to avoid that at all costs.

View 7 Replies


ADVERTISEMENT

Switching Mobo Without Reinstalling Windows 7

Sep 19, 2011

Working on my computer wants to switch out motherboards and see if it could be done without having to reinstall windows 7. Is it possible? Switching from an MSI X58 Platinum SLI to an Asus X58 Sabertooth.

View 9 Replies View Related

Qn About Legacy NForce2 - SATA Drivers For NF7-S Mobo

Sep 23, 2009

I have an Abit NF7-S mobo (5+ yrs old) that has an nForce2 Ultra 400 + MCP-T chipset. The nvidia site has classified this as legacy, and only has the download for Vista.

Well I usually prefer to install the 'official' drivers, as MS ones seem to be at times problematic from experience. However I went along with installing the ones provided my microsoft update. All components in Device Manager seem to have been installed, and the OS is working without a problem.

But the voice within me still prefers the 'official' vendor software. Would the vista one provided by nvidia work on Windows 7. I use to get a nice small app to control audio in the official release, which I am obviously not getting in the MS trimmed version.

I also have a SATA 150 RAID (Silicon Image Sil 3112A SATA PCI Controller) on the NF7-S which has the same issue as above. All working.. but for that voice.

View 4 Replies View Related

Burning CD Crashed And Corrupted Mobo SATA Port

Feb 20, 2010

i upgraded to windows 7, but also went to microcenter and purchased a sony optiarc 24x dvd burner. they claimed it was new, but microcenter has products come in plastic bags sometimes. i was leery.

windows 7 has been up for days, i've used the optiarc a few times. i tried to burn a cd using the windows 7 burning feature, and it was about 600mb and took about 15 minutes (does that even sound right for 52x?). with 3 minutes left, it froze. windows was working fine, but i eventually had to halt the task. when i did, explorer died, and i couldn't bring it back. i did ctrl+alt+del and shut down the PC, but it never happened. i just kept hearing the dvd burner spin up and down.

finally had to turn it off, when i turned it back on it posted then said "press any key to boot from cd," then "boot failure," so i restarted, went into the bios and the HD was set as first boot device. saved and tried again. same thing. turned the PC off and unplugged the cd burner entirely, started it up, same problem. turned it off, plugged in the HD SATA to another port (mine are grouped in two, the cd and hard drive were in the same group, so i plugged them both to the other group of sata ports - 2 per group - Gigabyte DS3 mobo, btw). started it up and it was fine.

turned the PC off, unplugged the cd burner entirely and hooked up the HD in the old sata, same "boot from cd" problem again. like the sata port is COMPLETELY fubarred. i don't know what happened. is this windows 7 fault or is my cd burner screwed up? i have it unplugged now and plan on taking it back and getting a refund tomorrow, as i think the problem is the cd burner.

any thoughts or opinions? anything else to add? i added 4gb of RAM today and everything was working fine, then coincidentally this happened. doesn't seem like the RAM has anything to do with this...what do you think happened here?

View 5 Replies View Related

Switching Sata Mode For Windows 7?

Feb 3, 2012

I installed windows 7 while my satas were set to ide mode in the bios. My old HP computer had them set to raid. I have run into this odd issue where I installed windows in ide mode on my HDD but now windows wont show my SSD(which i got for games) when I right click the C drive it shows the SSD as being part of the HDD. Even in my Bios it shows my main drive as my OCZ SSD. Anyways would switching to raid mode and then doing a windows repair fix anything? Or should i just switch it to raid mode unhook the SSD and then re install windows on my HDD(Which I have no problem doing but would like to avoid if possible)

View 2 Replies View Related

Switching SATA Connections To Run Windows 7 Pro From A Recently Installed SSD

Jan 15, 2013

Not wanting to use dual-booting - will I have problems switching SATA connections to run Win 7 Pro from a recently installed SSD and then from a HDD? This until I am satisfied with the transition to the SSD.

View 5 Replies View Related

Switching BIOS SATA RAID/AHCI Setting Causes BSOD At Windows Start

Mar 30, 2012

I just changed my disk setup from:

1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1

TO:

1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]

Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.


These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.

What am I missing? Why can't I set it to AHCI mode without BSODs?

View 8 Replies View Related

Lose HDDs (boot Hangs At DVD Sniffer Boot) After Switching To AHCI?

Apr 10, 2011

Win 7 x64 Home Premium w/Gigabyte GA-EP45-UD3P, v.1.1 (P45), works great in IDE mode. (N.B.: eSATA port is just regular SATA port w/cable as provided by Gigabyte.) Trying to install external eSATA HDD. First I enabled AHCI drivers via registry. Then I turned on AHCI in BIOS. When I save BIOS and reboot, boot hangs when DVD writer performs sniffer boot, i.e., HDDs aren't found.

View 1 Replies View Related

Choosing Which OS To Boot By Changing BIOS Boot Order

Oct 26, 2009

I am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.

When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.

Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.

View 2 Replies View Related

New Mobo/processor Won't Boot Windows 7

Jan 2, 2013

I upgraded to a new processor, motherboard, and gpu. I insalled all the new hardware and turned it on. Windows 7 won't/can't load and can't repair. I can't lose the data on the HDD because there's some very important stuff on there.

Sapphire 7950 HD
Corsair cx500
AMD FX 6100
Hyper 212 evo
WD 1TB green
6gb RAM
5 120mm fans
Cooler master 430 elite case

View 9 Replies View Related

Order Windows 7 Explorer View To Order Files And Folders Alphabetically?

Aug 26, 2011

how can i order win 7 windows explorer view to order files and folders alphabetically like this[CODE]

View 8 Replies View Related

HDD Boot Order Changes?

Jan 18, 2011

I've just built a new PC Win 7 64bit, Gigabyte X58A-UD5 with i950. I have logged into Bios settings and set the boot HDD to top. But next time i switch on pc it defaults back to the original HDD settings based on port used (?).

View 4 Replies View Related

ASUS MoBo Will Not Boot On SSD Drive On New Build?

Jan 11, 2012

I have just completed a new build. On first switch on the BIOS loaded & I received the message 'Re-boot & Select proper boot device'.I can't get past this.The build has a SSD drive only, the onboard graphics is being used for now, I have not yet connected a CD'DVD drive & no other drives.I have initialised the drive in another PC but that has not resolved the issue.All components are new, has anyone had a similar problem, it's got me puzzled?Motherboard ASUS P8Z68-V PRO/GEN 3Intel i5 2500K 3,3 Ghz 1155Corsair Vengence memory 16GBCorsair 60GB Force 3A SSD SATAiii 6Gb/s

View 5 Replies View Related

Changing Boot Order?

Jan 23, 2012

I have a Acer laptop which had a corrupt Windows installation, so I couldn't boot from the hard drive.The user doesn't have recovery discs and the Alt F10 Recovery option wasn't available, even though the hidden recovery partition is there PQSERVICE.In order to get to the files, a copy of Windows XP Pro was installed, but it won't activate - that that isn't a problem for me as I will remove it before the 30 days.I was given a recovery disc set designed for another computer, but - although it didn't work - the next time I booted the laptop it ran the eRecovery program and restored Windows 7 onto it, which is fantastic !!My problem is that the system is still booting to Windows XP which is on the D partition, and not to Windows 7 which is on the E partition. There is another partition called C called "SYSTEM" but it contains nothing apart from a hidden Program files folder !How do I tell the computer to boot from the recovered E partition so I can use Windows 7 and create the Recovery discs needed ? Then I can remove the Windows XP installation that I don't want or need.

View 3 Replies View Related

Boot Order Issue

Aug 22, 2009

When I originally installed 7 on my dad's PC, I disconnected the other 2 hard drives (I did not want the boot selection screen popping up all the time). Everything has been working fine (he uses XP, so I use the BIOS to select the hard drive boot order when I want to boot into 7). Yesterday I disconnected the Windows 7 hard drive, so that I could clone his XP installation over to the secondary hard drive in the machine (the primary & secondary drives are 80 GB SATA units, while the Windows 7 drive is a 30 GB IDE unit).

When I was finished, I shut down the machine & hooked the Windows 7 hard drive back up. For some odd reason, the machine boots into 7 no matter which drive is selected first in the BIOS boot order. I cannot figure this one out. With the Windows 7 drive disconnected, the machine boots into XP just fine. Does anyone have any idea what could be causing this to happen?? I cloned the XP drive once before & did not have this problem(I do it every couple of months so that he has a complete image should the main hard drive fail).

View 3 Replies View Related

Boot Order Changes On Every Start?

Jun 14, 2012

First of all sorry if there has been any similar question in the past.I am having a really agravating problem: my motherboard's bios keeps rearranging the boot order for the hard disks on every power-on cycle. I always turn the power off at night from the PSU swith to protect from spikes. If i don't do that, the boot order remains as i set it. The problem itself is: when pc is powered on, the RAID set i use for windows and games doesn't show up at all not even in the boot device selection menu F8. So i have to reset the system and only then can i use the F8 boot menu to select the RAID and use the pc normally, and the RAID is always the last option in the list. To make things worse, the wireless keyboard i use doesn't always work on the first attempt - probably legacy USB detection glitch - but that's ok i can live with that one as long as i am able to use it in Windows.The motherboard is Asus P5N-E SLI. Also i did verify the CMOS battery with a voltmeter and it shows over 3V so it's in good shape. Makes sense it be good since i've only had the board a few months, it's practically new even though not a new model. I also checked with Asus website for newer BIOS but not a chance, the motherboard is not even in production any more.

View 1 Replies View Related

Drives Boot Order - SSD / HDD And DVD

Jul 18, 2012

SSD, HDD and DVD DRIVE. What should be the boot order for these three? Someone told me it was DVD>HDD>SDD and on a guide I read it was HDD>DVD>SDD. Is there actually a specific boot order or is it based more on what you're using it for or something like that? Not too sure which category to post this thread in since im building a new PC and I think that goes under 'Installation'... Or maybe it should have been in 'Hardware'...?

View 5 Replies View Related

Boot Order In Windows 7

Sep 14, 2012

Maybe stupid question....but even so'My laptop boot order is HDD/SSD, USB,DVD,Should I change it?It will be better to start by the DVD?Of course I may change it hiting F2 and then go back again to another order!

View 4 Replies View Related

Changing Boot Order In Windows 7?

Jan 6, 2013

I have a newish Asus laptop. my old Toshiba laptop had a hard drive crash. I am hoping to recover docs and photos by use of a Linux system on a USB drive. I tried to alter the boot order on my new Asus to experiment with it, but I cannot seem to find a way to enable booting from a USB drive. on my working Asus, I have Windows 7 home premium, 64-bit version. the

View 2 Replies View Related

Change The Devices Boot Order Between CD-ROM, HDD And USB?

Jan 11, 2012

how will i be able to change the devices boot order between CD-ROM, HDD and USB [COLOR=blue !important]drives[/COLOR] within a windows not in bios. is there any particular utility or software which to use?

View 1 Replies View Related

Get Into Setup To Change The Boot Order?

Aug 13, 2012

A friend of mine has a 5 year old Vaio which is now so slow it's basically unuseable, so I said I would wipe it and put XP or 7 on it, but am having some problems.I want to get into setup to change the boot order so that I can use a memory stick or a DVD to boot Windows but there is a password on the setup. I spoke to my friend and he claims that he bought the computer and set it up himself, and has never been into the BIOS. Are there any default passwords for Sony's?

View 2 Replies View Related

Change Boot Order From D To C Drive?

Nov 17, 2012

I have one drive that has been patitioned into C & D drives. Both had Windows 7 on it however, my C drive was much fuller. I had no way to back up everything so I moved anything I wanted to save from D to C so I can reformt D & reinstall Windows 7. Then I plan to do the same vise-versa, once I have time to sort throught everything. Until then I would like it to boot with D. Keep in mind booth are win 7.

View 1 Replies View Related

Can't Boot From CD And Boot Order Is Set Properly

Dec 19, 2012

Here is a rundown of what happened.

- My original hard drive in my dell xps m1530 crashed so I bought a new hybrid drive.

- I installed the new drive and went to install windows 7 back on the drive

- The windows 7 install hung forever so I canceled out of it.

- After I did that I went to try the install again and now when I start my computer all I get is "BOOTMGR is missing"

- I've set my boot sequence properly in the BIO's and I've checked that the CD i'm using is bootable as it works perfectly on another cpu

- I've even turned the hard drive off in the boot sequence and then the laptop tells me there is no bootable drives

I can take to get it to recognized the CD and boot from it?

View 7 Replies View Related

Switching Boot Drive From SSD To HDD?

Feb 5, 2012

I built my computer the other day, and I had not planned to have an ssd at all, but somehow ended up getting a 64 gigabyte Samsung SSD. It is very fast, which is good for the boot, and i just told myself i would put all programs on the HDD. I did that, Windows installation took up like 25 gigs, and since then I've been watching the disk space slowly drop. without even putting anything on it. So i need to switch the boot drive to the HDD, i dont know how to do this. Can i just copy and paste the entire ssd onto the HDD? or do i need to install windows on the HDD. how exactly can i accomplish this. I actually prefer this solution because this way i can have all my more used (large) programs on the ssd operate very quickly and just have to have a longer boot time. If you are going to try and change my opinion

View 9 Replies View Related

Computer Randomly Changes Hd Boot Order And Not Gets Booted

Jul 18, 2011

I replaced my motherboard and installed an Agility ssd for my boot drive. Every couple weeks, the computer won't boot. I go into the bios under "hard drive boot order" and find that one of my other hard drives is at the top of the hit parade. It even put my external drive as the boot drive one time. As soon as I switch my ssd to boot drive of course it boots up properly. Any ideas why it's doing this?

View 3 Replies View Related

BSOD Randomly HDD Boot Order Reshuffle

Jan 18, 2012

I keep getting random BSOD's, which unfortunately change around by boot order in my BIOS. It usually sends first boot to USB meaning I have to go into my BIOS and change the order around each time. (After unplugging the PC for 10 seconds, otherwise it wont even boot past BIOS screen)

View 5 Replies View Related

How To Enter Into BIOS In Windows 7 To Change Boot Order

May 14, 2011

I am trying to install ubuntu from a pendrive...I need to know how can I enter into BIOS in windows7 to change the boot order.

View 7 Replies View Related

Pre Order Upgrade Dual Boot Install Options

Jun 27, 2009

I currently have Vista Ultimate x64 and Windows 7 RC1 x64 running in a dual boot setup. Each OS is installed on a separate disk drive. If I preorder Windows 7 Professional upgrade ($99) will I be able to do a clean install on a partition of my choice or will it force me to clean install over my existing Vista Ultimate partition ?? I understand that I cant do an upgrade in place from Vista Ultimate to Windows 7 Professional. My question is will the preorder Windows 7 upgrade force to me "kill" my Vista Ultimate partition ?

View 1 Replies View Related

Can't Access Bios To Change Boot Order / TrueCrypt

Feb 27, 2012

I am currently unable to access my bios because of the TrueCrypt Boot Loader. This also means I can't change my boot order to boot into a cd. The boot order was messed up, and whenever the password is entered it just says "No available partition" and then shuts down, so I have to press [ESC] to avoid the boot loader. And this skips any chance to enter the bios.Is there any way to fixmbr/fixboot without booting into a USB or CD?The only other way would be to remove my hard drive and get a new one to install windows on.

View 7 Replies View Related

Bios Boot Order Menu Has An Item Called 'Ubuntu'

Nov 24, 2011

I recently tried to install Linux Ubuntu but it didin't work well. So I deleted all the partitions and made a clean windows 7 install. Everything works just fine. Before the windows installation there was a weird bootloader starts at first. Here's the picture. After I installed windows I looked at my bios settings and in the boot menu I still had Ubuntu. I used recovery cd and did a console command which is "bootsect /nt60 all". But it is still there. How can I delete this without doing any formatting, reinstalling.

View 9 Replies View Related

Remove The PATA, Change The Boot Order From It To The SSD - NTLDR Missing?

Mar 11, 2012

Well, i ve had the XP for quite some time and got the trial win 7 version installed.The XP is on a PATA drive. The 7 is on a new SSD OCZ drive. Windows 7 boots everytime (after i manually select it) when the PATA is connected. Once i remove the PATA, change the boot order from it to the SSD - NTLDR Missing. I want to remove the PATA drive from my system but it wont load the 7 without the XP

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved