Can't Access Bios To Change Boot Order / TrueCrypt
Feb 27, 2012
I am currently unable to access my bios because of the TrueCrypt Boot Loader. This also means I can't change my boot order to boot into a cd. The boot order was messed up, and whenever the password is entered it just says "No available partition" and then shuts down, so I have to press [ESC] to avoid the boot loader. And this skips any chance to enter the bios.Is there any way to fixmbr/fixboot without booting into a USB or CD?The only other way would be to remove my hard drive and get a new one to install windows on.
I am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
I recently tried to install Linux Ubuntu but it didin't work well. So I deleted all the partitions and made a clean windows 7 install. Everything works just fine. Before the windows installation there was a weird bootloader starts at first. Here's the picture. After I installed windows I looked at my bios settings and in the boot menu I still had Ubuntu. I used recovery cd and did a console command which is "bootsect /nt60 all". But it is still there. How can I delete this without doing any formatting, reinstalling.
how will i be able to change the devices boot order between CD-ROM, HDD and USB [COLOR=blue !important]drives[/COLOR] within a windows not in bios. is there any particular utility or software which to use?
A friend of mine has a 5 year old Vaio which is now so slow it's basically unuseable, so I said I would wipe it and put XP or 7 on it, but am having some problems.I want to get into setup to change the boot order so that I can use a memory stick or a DVD to boot Windows but there is a password on the setup. I spoke to my friend and he claims that he bought the computer and set it up himself, and has never been into the BIOS. Are there any default passwords for Sony's?
I have one drive that has been patitioned into C & D drives. Both had Windows 7 on it however, my C drive was much fuller. I had no way to back up everything so I moved anything I wanted to save from D to C so I can reformt D & reinstall Windows 7. Then I plan to do the same vise-versa, once I have time to sort throught everything. Until then I would like it to boot with D. Keep in mind booth are win 7.
Well, i ve had the XP for quite some time and got the trial win 7 version installed.The XP is on a PATA drive. The 7 is on a new SSD OCZ drive. Windows 7 boots everytime (after i manually select it) when the PATA is connected. Once i remove the PATA, change the boot order from it to the SSD - NTLDR Missing. I want to remove the PATA drive from my system but it wont load the 7 without the XP
I have a problem with two external-hardrives that I cant access. I keep getting incorrect password or not a truecrypt volume I have one drive that is a 2 terabyte drive and another one that's 1 terabyte. They both where working fine when I tested them about a week ago. Since Saturday I have been trying to access the 2 terabyte drive, but I just keep getting incorrect password.Yesterday I also tested the 1 terabyte drive but still no luck. I know that both the drives cant be malfunctioning.
I have a customized Windows Home Premium SP1 installation on a USB bootable drive. I wanted to know if there was any way I can have some sort of pre-boot authentication that involves typing in a password onto the USB drive to access the bootup of Windows 7 installation?
Is there anyway to accomplish this with TrueCrypt? Other software?
I forgot my windows password, so I created an Ophcrack ISI Image DVD. When I try this the bios shows my DVD drive in the list of bootable devices, and I select it, save changes, and exit bios, the computer then tries to boot from the hard drive (not the DVD drive selected) and obviously starts up asking for my windows password which I do not have. WHY won't the bios allow me to change the bootable drive to DVD?
I save a lot of folders on my desktop. For the most part they are sorted alphabetically, from A to Z, with no problem.
For the last several months, if something is named numerically, they are saved backwards. In other words, if I have files named 001, 002, 003 instead of showing up in 001-002-003 sort order, they show up in 003-002-001 sort order.
How do I change this back to the original 001-002-003 sort order?
I used the premium upgrade version to upgrade my vista to 7 and loving it so far. With vista on the welcome screen it was alphabetical so with my name beginning with "A" my name was first, my parents who I start pff woith my mums name "L" 2nd and my sister "M" 3rd but since the upgrade the order changed and now I'm 3rd, my sister second and my parents first.
NOt so big a deal but I was use to the old order plus with my name being first I just had to hit enter and type in password now I'm too lazy to use the cursor to click on my name or the arrow keys to go to it hahaha nah but just was use to the old order and wow I've made a long post over something so dumb.
I am running an ASUS U-47 laptop and am trying to access the system recovery options. However, when I try and access them, which I have done from both the recovery partition as well as a system repair disc, I am only directed to the restore to jfactory preset wizard, which offers me three options; restore windows to entire HD, just this partition, or 2 partitions. I am trying to access the bootsect.exe in order to remove grub, and as far as I can see, the only way to do that is through the command prompt in the system recovery environment.
I've just built a new PC Win 7 64bit, Gigabyte X58A-UD5 with i950. I have logged into Bios settings and set the boot HDD to top. But next time i switch on pc it defaults back to the original HDD settings based on port used (?).
I have a Acer laptop which had a corrupt Windows installation, so I couldn't boot from the hard drive.The user doesn't have recovery discs and the Alt F10 Recovery option wasn't available, even though the hidden recovery partition is there PQSERVICE.In order to get to the files, a copy of Windows XP Pro was installed, but it won't activate - that that isn't a problem for me as I will remove it before the 30 days.I was given a recovery disc set designed for another computer, but - although it didn't work - the next time I booted the laptop it ran the eRecovery program and restored Windows 7 onto it, which is fantastic !!My problem is that the system is still booting to Windows XP which is on the D partition, and not to Windows 7 which is on the E partition. There is another partition called C called "SYSTEM" but it contains nothing apart from a hidden Program files folder !How do I tell the computer to boot from the recovered E partition so I can use Windows 7 and create the Recovery discs needed ? Then I can remove the Windows XP installation that I don't want or need.
When I originally installed 7 on my dad's PC, I disconnected the other 2 hard drives (I did not want the boot selection screen popping up all the time). Everything has been working fine (he uses XP, so I use the BIOS to select the hard drive boot order when I want to boot into 7). Yesterday I disconnected the Windows 7 hard drive, so that I could clone his XP installation over to the secondary hard drive in the machine (the primary & secondary drives are 80 GB SATA units, while the Windows 7 drive is a 30 GB IDE unit).
When I was finished, I shut down the machine & hooked the Windows 7 hard drive back up. For some odd reason, the machine boots into 7 no matter which drive is selected first in the BIOS boot order. I cannot figure this one out. With the Windows 7 drive disconnected, the machine boots into XP just fine. Does anyone have any idea what could be causing this to happen?? I cloned the XP drive once before & did not have this problem(I do it every couple of months so that he has a complete image should the main hard drive fail).
First of all sorry if there has been any similar question in the past.I am having a really agravating problem: my motherboard's bios keeps rearranging the boot order for the hard disks on every power-on cycle. I always turn the power off at night from the PSU swith to protect from spikes. If i don't do that, the boot order remains as i set it. The problem itself is: when pc is powered on, the RAID set i use for windows and games doesn't show up at all not even in the boot device selection menu F8. So i have to reset the system and only then can i use the F8 boot menu to select the RAID and use the pc normally, and the RAID is always the last option in the list. To make things worse, the wireless keyboard i use doesn't always work on the first attempt - probably legacy USB detection glitch - but that's ok i can live with that one as long as i am able to use it in Windows.The motherboard is Asus P5N-E SLI. Also i did verify the CMOS battery with a voltmeter and it shows over 3V so it's in good shape. Makes sense it be good since i've only had the board a few months, it's practically new even though not a new model. I also checked with Asus website for newer BIOS but not a chance, the motherboard is not even in production any more.
SSD, HDD and DVD DRIVE. What should be the boot order for these three? Someone told me it was DVD>HDD>SDD and on a guide I read it was HDD>DVD>SDD. Is there actually a specific boot order or is it based more on what you're using it for or something like that? Not too sure which category to post this thread in since im building a new PC and I think that goes under 'Installation'... Or maybe it should have been in 'Hardware'...?
Maybe stupid question....but even so'My laptop boot order is HDD/SSD, USB,DVD,Should I change it?It will be better to start by the DVD?Of course I may change it hiting F2 and then go back again to another order!
I have a newish Asus laptop. my old Toshiba laptop had a hard drive crash. I am hoping to recover docs and photos by use of a Linux system on a USB drive. I tried to alter the boot order on my new Asus to experiment with it, but I cannot seem to find a way to enable booting from a USB drive. on my working Asus, I have Windows 7 home premium, 64-bit version. the
I replaced my motherboard and installed an Agility ssd for my boot drive. Every couple weeks, the computer won't boot. I go into the bios under "hard drive boot order" and find that one of my other hard drives is at the top of the hit parade. It even put my external drive as the boot drive one time. As soon as I switch my ssd to boot drive of course it boots up properly. Any ideas why it's doing this?
I keep getting random BSOD's, which unfortunately change around by boot order in my BIOS. It usually sends first boot to USB meaning I have to go into my BIOS and change the order around each time. (After unplugging the PC for 10 seconds, otherwise it wont even boot past BIOS screen)
After putting in a second GPU -- which now covers 3 of my Sata ports -- I was forced to switch my drive order around. I was able to boot successfully with 2 of them, but oddly not 3. So I removed my System Reserve drive, setting C: to the active drive, figuring that would clear things up. Then plugged in my 3rd drive into that spot leaving just 2 drives, but windows still does not boot.I checked boot order in BIOS, but I still get boot error.Windows will only boot when I remove the drive leaving only the OS drive.I know a reinstall will solve my problems, but I need to avoid that at all costs.
I currently have Vista Ultimate x64 and Windows 7 RC1 x64 running in a dual boot setup. Each OS is installed on a separate disk drive. If I preorder Windows 7 Professional upgrade ($99) will I be able to do a clean install on a partition of my choice or will it force me to clean install over my existing Vista Ultimate partition ?? I understand that I cant do an upgrade in place from Vista Ultimate to Windows 7 Professional. My question is will the preorder Windows 7 upgrade force to me "kill" my Vista Ultimate partition ?
So I tried installing Windows on my new machine and did waht seemed to be the recommended thing and plugged in only my SSD into the Sata port, leaving my other drives unplugged until after the installation. Everything went fine and I was able to get Windows 7 up, drivers were installing and everything was peachy, but Then I plugged in my other drives, and when I did so with the computer running Windows immediately recognized them and I could access them, as well as do whatever I wanted. However when I restarted I got the message BOOTMGR is missing.
Now, you may be thinking that this is a simple issue of it trying to load from one of those other HDDs, just set the boot order in the BIOS blah blah. But its not. I set the boot order in the BIOS to use the SSD, I set the SSD to the top of the list within the HDDS priority order and still nothing. I then took it a step further and instead of selecting the order manually told it to boot from the SSD flat out, boot from this drive and the same error message came up. I already did the boot from Windows disc, startup repair thing - didn't work.