Change The Devices Boot Order Between CD-ROM, HDD And USB?
Jan 11, 2012
how will i be able to change the devices boot order between CD-ROM, HDD and USB [COLOR=blue !important]drives[/COLOR] within a windows not in bios. is there any particular utility or software which to use?
View 1 Replies
ADVERTISEMENT
Aug 13, 2012
A friend of mine has a 5 year old Vaio which is now so slow it's basically unuseable, so I said I would wipe it and put XP or 7 on it, but am having some problems.I want to get into setup to change the boot order so that I can use a memory stick or a DVD to boot Windows but there is a password on the setup. I spoke to my friend and he claims that he bought the computer and set it up himself, and has never been into the BIOS. Are there any default passwords for Sony's?
View 2 Replies
View Related
Nov 17, 2012
I have one drive that has been patitioned into C & D drives. Both had Windows 7 on it however, my C drive was much fuller. I had no way to back up everything so I moved anything I wanted to save from D to C so I can reformt D & reinstall Windows 7. Then I plan to do the same vise-versa, once I have time to sort throught everything. Until then I would like it to boot with D. Keep in mind booth are win 7.
View 1 Replies
View Related
May 14, 2011
I am trying to install ubuntu from a pendrive...I need to know how can I enter into BIOS in windows7 to change the boot order.
View 7 Replies
View Related
Feb 27, 2012
I am currently unable to access my bios because of the TrueCrypt Boot Loader. This also means I can't change my boot order to boot into a cd. The boot order was messed up, and whenever the password is entered it just says "No available partition" and then shuts down, so I have to press [ESC] to avoid the boot loader. And this skips any chance to enter the bios.Is there any way to fixmbr/fixboot without booting into a USB or CD?The only other way would be to remove my hard drive and get a new one to install windows on.
View 7 Replies
View Related
Mar 11, 2012
Well, i ve had the XP for quite some time and got the trial win 7 version installed.The XP is on a PATA drive. The 7 is on a new SSD OCZ drive. Windows 7 boots everytime (after i manually select it) when the PATA is connected. Once i remove the PATA, change the boot order from it to the SSD - NTLDR Missing. I want to remove the PATA drive from my system but it wont load the 7 without the XP
View 3 Replies
View Related
Jan 15, 2012
I save a lot of folders on my desktop. For the most part they are sorted alphabetically, from A to Z, with no problem.
For the last several months, if something is named numerically, they are saved backwards. In other words, if I have files named 001, 002, 003 instead of showing up in 001-002-003 sort order, they show up in 003-002-001 sort order.
How do I change this back to the original 001-002-003 sort order?
View 3 Replies
View Related
Oct 24, 2009
I used the premium upgrade version to upgrade my vista to 7 and loving it so far. With vista on the welcome screen it was alphabetical so with my name beginning with "A" my name was first, my parents who I start pff woith my mums name "L" 2nd and my sister "M" 3rd but since the upgrade the order changed and now I'm 3rd, my sister second and my parents first.
NOt so big a deal but I was use to the old order plus with my name being first I just had to hit enter and type in password now I'm too lazy to use the cursor to click on my name or the arrow keys to go to it hahaha nah but just was use to the old order and wow I've made a long post over something so dumb.
View 4 Replies
View Related
Mar 12, 2011
I changed to Windows 9, I then changed back to 8, but my browser is still 64 bits. I apparently deleted the old 32 bit browser when I changed over
View 1 Replies
View Related
Jan 22, 2013
In Windows, I can't seem to drag and drop my picture files within folders to rearrange their order like I could in XP.
View 3 Replies
View Related
Oct 26, 2009
I am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
View 2 Replies
View Related
Aug 26, 2011
how can i order win 7 windows explorer view to order files and folders alphabetically like this[CODE]
View 8 Replies
View Related
Jan 18, 2011
I've just built a new PC Win 7 64bit, Gigabyte X58A-UD5 with i950. I have logged into Bios settings and set the boot HDD to top. But next time i switch on pc it defaults back to the original HDD settings based on port used (?).
View 4 Replies
View Related
Jan 23, 2012
I have a Acer laptop which had a corrupt Windows installation, so I couldn't boot from the hard drive.The user doesn't have recovery discs and the Alt F10 Recovery option wasn't available, even though the hidden recovery partition is there PQSERVICE.In order to get to the files, a copy of Windows XP Pro was installed, but it won't activate - that that isn't a problem for me as I will remove it before the 30 days.I was given a recovery disc set designed for another computer, but - although it didn't work - the next time I booted the laptop it ran the eRecovery program and restored Windows 7 onto it, which is fantastic !!My problem is that the system is still booting to Windows XP which is on the D partition, and not to Windows 7 which is on the E partition. There is another partition called C called "SYSTEM" but it contains nothing apart from a hidden Program files folder !How do I tell the computer to boot from the recovered E partition so I can use Windows 7 and create the Recovery discs needed ? Then I can remove the Windows XP installation that I don't want or need.
View 3 Replies
View Related
Aug 22, 2009
When I originally installed 7 on my dad's PC, I disconnected the other 2 hard drives (I did not want the boot selection screen popping up all the time). Everything has been working fine (he uses XP, so I use the BIOS to select the hard drive boot order when I want to boot into 7). Yesterday I disconnected the Windows 7 hard drive, so that I could clone his XP installation over to the secondary hard drive in the machine (the primary & secondary drives are 80 GB SATA units, while the Windows 7 drive is a 30 GB IDE unit).
When I was finished, I shut down the machine & hooked the Windows 7 hard drive back up. For some odd reason, the machine boots into 7 no matter which drive is selected first in the BIOS boot order. I cannot figure this one out. With the Windows 7 drive disconnected, the machine boots into XP just fine. Does anyone have any idea what could be causing this to happen?? I cloned the XP drive once before & did not have this problem(I do it every couple of months so that he has a complete image should the main hard drive fail).
View 3 Replies
View Related
Jun 14, 2012
First of all sorry if there has been any similar question in the past.I am having a really agravating problem: my motherboard's bios keeps rearranging the boot order for the hard disks on every power-on cycle. I always turn the power off at night from the PSU swith to protect from spikes. If i don't do that, the boot order remains as i set it. The problem itself is: when pc is powered on, the RAID set i use for windows and games doesn't show up at all not even in the boot device selection menu F8. So i have to reset the system and only then can i use the F8 boot menu to select the RAID and use the pc normally, and the RAID is always the last option in the list. To make things worse, the wireless keyboard i use doesn't always work on the first attempt - probably legacy USB detection glitch - but that's ok i can live with that one as long as i am able to use it in Windows.The motherboard is Asus P5N-E SLI. Also i did verify the CMOS battery with a voltmeter and it shows over 3V so it's in good shape. Makes sense it be good since i've only had the board a few months, it's practically new even though not a new model. I also checked with Asus website for newer BIOS but not a chance, the motherboard is not even in production any more.
View 1 Replies
View Related
Jul 18, 2012
SSD, HDD and DVD DRIVE. What should be the boot order for these three? Someone told me it was DVD>HDD>SDD and on a guide I read it was HDD>DVD>SDD. Is there actually a specific boot order or is it based more on what you're using it for or something like that? Not too sure which category to post this thread in since im building a new PC and I think that goes under 'Installation'... Or maybe it should have been in 'Hardware'...?
View 5 Replies
View Related
Sep 14, 2012
Maybe stupid question....but even so'My laptop boot order is HDD/SSD, USB,DVD,Should I change it?It will be better to start by the DVD?Of course I may change it hiting F2 and then go back again to another order!
View 4 Replies
View Related
Jan 6, 2013
I have a newish Asus laptop. my old Toshiba laptop had a hard drive crash. I am hoping to recover docs and photos by use of a Linux system on a USB drive. I tried to alter the boot order on my new Asus to experiment with it, but I cannot seem to find a way to enable booting from a USB drive. on my working Asus, I have Windows 7 home premium, 64-bit version. the
View 2 Replies
View Related
Dec 19, 2012
Here is a rundown of what happened.
- My original hard drive in my dell xps m1530 crashed so I bought a new hybrid drive.
- I installed the new drive and went to install windows 7 back on the drive
- The windows 7 install hung forever so I canceled out of it.
- After I did that I went to try the install again and now when I start my computer all I get is "BOOTMGR is missing"
- I've set my boot sequence properly in the BIO's and I've checked that the CD i'm using is bootable as it works perfectly on another cpu
- I've even turned the hard drive off in the boot sequence and then the laptop tells me there is no bootable drives
I can take to get it to recognized the CD and boot from it?
View 7 Replies
View Related
Jan 24, 2012
The title is pretty much what i want, some kind of key to press that will change my playback devices from my speakers to my headphones and vice versa? I tried by doing a macro but that didnt work at all so can i just set a key to change it automatically?
View 1 Replies
View Related
Jul 18, 2011
I replaced my motherboard and installed an Agility ssd for my boot drive. Every couple weeks, the computer won't boot. I go into the bios under "hard drive boot order" and find that one of my other hard drives is at the top of the hit parade. It even put my external drive as the boot drive one time. As soon as I switch my ssd to boot drive of course it boots up properly. Any ideas why it's doing this?
View 3 Replies
View Related
Jan 18, 2012
I keep getting random BSOD's, which unfortunately change around by boot order in my BIOS. It usually sends first boot to USB meaning I have to go into my BIOS and change the order around each time. (After unplugging the PC for 10 seconds, otherwise it wont even boot past BIOS screen)
View 5 Replies
View Related
Aug 29, 2011
After putting in a second GPU -- which now covers 3 of my Sata ports -- I was forced to switch my drive order around. I was able to boot successfully with 2 of them, but oddly not 3. So I removed my System Reserve drive, setting C: to the active drive, figuring that would clear things up. Then plugged in my 3rd drive into that spot leaving just 2 drives, but windows still does not boot.I checked boot order in BIOS, but I still get boot error.Windows will only boot when I remove the drive leaving only the OS drive.I know a reinstall will solve my problems, but I need to avoid that at all costs.
View 7 Replies
View Related
Jun 27, 2009
I currently have Vista Ultimate x64 and Windows 7 RC1 x64 running in a dual boot setup. Each OS is installed on a separate disk drive. If I preorder Windows 7 Professional upgrade ($99) will I be able to do a clean install on a partition of my choice or will it force me to clean install over my existing Vista Ultimate partition ?? I understand that I cant do an upgrade in place from Vista Ultimate to Windows 7 Professional. My question is will the preorder Windows 7 upgrade force to me "kill" my Vista Ultimate partition ?
View 1 Replies
View Related
May 27, 2012
Now Default View Is Large Icons. I Try to Change Default to Small Icons Like This. But When I Re-Open Devices And Printers Windows. Default View Is Back to Large Icons [It No Remember Small Icons View Follow I'm Settings Before].
View 2 Replies
View Related
Nov 24, 2011
I recently tried to install Linux Ubuntu but it didin't work well. So I deleted all the partitions and made a clean windows 7 install. Everything works just fine. Before the windows installation there was a weird bootloader starts at first. Here's the picture. After I installed windows I looked at my bios settings and in the boot menu I still had Ubuntu. I used recovery cd and did a console command which is "bootsect /nt60 all". But it is still there. How can I delete this without doing any formatting, reinstalling.
View 9 Replies
View Related
Jun 4, 2012
So I tried installing Windows on my new machine and did waht seemed to be the recommended thing and plugged in only my SSD into the Sata port, leaving my other drives unplugged until after the installation. Everything went fine and I was able to get Windows 7 up, drivers were installing and everything was peachy, but Then I plugged in my other drives, and when I did so with the computer running Windows immediately recognized them and I could access them, as well as do whatever I wanted. However when I restarted I got the message BOOTMGR is missing.
Now, you may be thinking that this is a simple issue of it trying to load from one of those other HDDs, just set the boot order in the BIOS blah blah. But its not. I set the boot order in the BIOS to use the SSD, I set the SSD to the top of the list within the HDDS priority order and still nothing. I then took it a step further and instead of selecting the order manually told it to boot from the SSD flat out, boot from this drive and the same error message came up. I already did the boot from Windows disc, startup repair thing - didn't work.
View 14 Replies
View Related
Sep 23, 2012
I have just installed a new P5G41T-M LX Series motherboard and two DDR3 x 2GB replacing DDR2. During startup a message says BOOTMGR is missing, press Ctrl Alt Delete to restart, on restart the same message is repeated.
View 1 Replies
View Related
Apr 14, 2012
is it very highly recommended to do a registry change - USB Port Remains Active for Disabled or Safely Removed USB Device to power down usb devices like external hard drives after clicking safely remove on windows 7i started using windows 7 recently and the first internal hard drive which i used for external storage on the netbook - windows 7 became unusable after 4 times' usage. Later, I found out about external hard drives still spinning after safely remove or shutting down the computer , on windows 7.i want to protect my other external hard drives so, hence my question above.
No one around me did the registry change as they said that as long as safely remove feature is used, it is enough already despite that the hard drive is still spinning.i hope that i can find at least one person here who is very serious in caring about his/her external hard drives, to give me his/her input.I notice windows 7's usb issue started back in late 2009. I wonder why Microsoft never include its remedy - USB Port Remains Active for Disabled or Safely Removed USB Device in the updates. Is there any bad effect when using the remedy
View 3 Replies
View Related
Jun 12, 2012
When I installed a TF III GTX 570 video card I lost my PCIE-X1 slot and 1 SATA port on the Inspiron 530 Foxconn G33-M03 MOBO I am still running. Now aside from the fact that I need to upgrade the MOBO...
I added a Rosewill RC-209-EX PCI-SATA adapter (SiL3114) to gain back 4 SATA ports. The card is working fine. It is slow compared to the MOBO SATA ports but I expected that. I have a Seagate 500GB HDD and an Optiarc DVD R/W drive attached to it. BUT..... I can not boot from either device. They do not appear in the boot options....
Based on my reading I got the "NON-RAID" (IDE/ATA emulation) BIOS from Silicon Image and flashed the card's BIOS since I will not be using it for RAID. It is just for more SATA ports. Should I be able to "see" the PCI-SATA card and its attached devices in the 530's BIOS Setup Screen? Is it a limitation of my Dell neutered BIOS?
The RC-209-EX documentation specifically states it "supports" CD/DVD drives.
There is plenty written about booting from a RAID array configured to the RC-209-EX but very little about booting from single device.
View 3 Replies
View Related