Am planning a new build and the Asus P8Z77-V board is cheaper by $40 than the Asus P8Z77-V Pro but has 8 phase power as opposed to the Pro with 12 phase power.Now I have done a quick Google and there are refs to this but could someone put it in plain / basic wording as there are some refs to CPU power supply, vdroop, and other tech stuff that I don't really understand??I intend running an i5 3570K and have try at over clocking - if that has any relevance for what my query is about.
I installed a new pc for a friend of mine and it wouldn't start. Although I have basic knowledge in PCs and installing the necessary partswiring needed to make the PC functional, I have installed a couple of PCs before this one and worked fine. Now I'm confused with this one. - When I turn on the PC the fans (cpugpu) slightly move and then stop. My guess is that the system for some reason isn't receiving any power. I have also tried using a different PSU (ZALMAN 850 watts) and I still got the same result.
1) I recently designed a software application to run on a personal computer running windows 7 home premium. This computer has another monitor connected to it through vga cable. Everytime now I power it up, all I see on monitors is a message in blue in the centre of the screen saying" No signal". Well this is really what my customer has reported to me and I am going to look at the problem tomorrow. Customer knows basics about computers and I believe there could be something more technical for this behaviour and I want to list all issues which could cause this problem before I get there.
my Acer Aspire 9302AWSMi laptop can't display anything when I press the power button. hard disk light just keep flashing and nothing else happened. i bought this laptop in Geneva back in late 2007 but it's been like this since 2008 or 9.
I've noticed this anomaly now on two of my Windows 7 rigs, one each Ultimate and Home Premium; Monitors that attach via HDMI are not getting the 'power off' message from the OS. The same monitors hooked up by other means [dvi, vga] do power off just as they should per the power plan settings.
So I have a HP laptop running Windows 7 Home Premium 64 bit that turned off during an update not to long ago. I have been trying to get it fixed but I have ran out of options. After a long boot time to the login screen and after I get logged in, I can do nothing on my desktop. It lags and freezes like crazy. Then when I try to get in via Safe Mode, it just restarts.
I have no idea what caused all of this to start happening. Maybe force quitting an install? I tried Googling the problem but every fix I tried didn't work; I don't think I've found my exact problem yet. I tried restarting, looking in the services (it wasn't able to be shut down, msiexec or something?), and using the Windows system scan. The Windows System Restore hangs too - so I couldn't do that either. Installers that failedEvery one that I have tried since it first started - Nvidia graphics drivers, windows 7 tools, uninstallers, etc. Windows 7 x64 UltimateIntel i7 3770kMSI GeForce GTX 670 Power EditionCorsair Vengeance 1600MHz 8GB x 2ASRock z77 Extreme 4Corsair 750 Watt Gold + Certified PSUOCZ Vertex 4 256GB SSDSeagate Barracuda 2TB HDD
i'm trying to upgrade from vista 32 bit to 7 32bit using an official CD. Doing a clean install isnt something I can do b/c I dont want to lose everything on my harddrive. When I do the upgrade I get the error "Windows could not prepare the computer to boot into the next phase of installation." I've tried disabling everything but microsoft services at bootup before installing, but to no avail. The compatibility checker thing doesn't come up with any problems before installation.I've got over 20gigs of space still on my harddrive, so I don't think that's the problem. I've also run the chkdsk utility from the command prompt, but I don't think it found anything.
i trying to install windows 7 Ultimate 32Bit on Adaptec aha-2940 UUW SCSI Bios Windows installation to the stage (installing updates) will continue But when the stage (complete Windows installation) is the following message appears: ''windows could not prepare the computer to boot into the next phase of installation.to install windows restart the installation"
Like 3 weeks ago the smarthdd malware affected my computer. The one where all your icons, files, etc. are hidden, gives you bogus security alerts, and then turns off the PC. Using support from the web with Rkill, MalwareBytes, and Hitman Pro. I eliminated the problem. While I thought I had recovered the computer I was wrong. Probably a day later I notice regedit would start when the computer was started and a few seconds later the computer would turn off. After turning on the computer a few times, the problem was gone. MSE is turned off. I tried to turn it on but it wouldn't turn on, saying the system needed to restart.
I also notices the computer would notify that Windows Update was also turned off and can't turn it on or download any updates (error: windows update cannot currently check for update, because the service is not running. You may need to restart the computer). Also, when I click the Nvidia settings icon, the computer does not detect video graphics hardware. I checked around a forum and I saw someone having the same problem and was advised to set BITS service and Windows Update service to start automatic. But when I check the services.msc, those services are gone. Also, I noticed that in the Device Manager, in System Devices, 2nd Generation Intel Core processor family PCI Express controller - 0101 has a yellow triangle sign on it.
On properties, it has this status: "Windows cannot initialize the device driver for this hardware. (Code 37)". So I try uninstalling MSE and installing it again, but the problem persist there. I run several scans with different anti-virus/malare and while I do find a few malwares, fixing/deleting/quarantined them haven't solved the problem. Yet, one antivirus (eset nod) wouldn't install, after many tries when it got to a driver install stage. I also try windows fix it, but nothing was solved. Also tried kapersky TDSSkiller, and nothing was solved (though when initializing, it gives an error saying that 'Can't load driver", yet it continues initializing).
So then I tried chkdsk /r in the command prompt, but it throws off an error in the second stage, restarting the scan again continuously until I decide to skip the scan. Finally I decided I had enough and tried a repair install, but after the stage where it check the programs and settings, I get the error "windows could not prepare the computer to boot into the next phase of installation". Then out of resignation I tried doing a clean install, but it gives me the same error. Later ran sfc /scannow on command prompt, and the log said that it couldn't repair DDORes.dll. So then what I did was replace DDORes.dll with one from installation disk.
Nothing was solved, and sfc scan still gives me that DDORes.dll is corrupted and can't be repaired. Later I tried upgrading the Intel graphics driver and the Intel Display Audio Driver. After rebooting the resolution of the laptop changed from 1366 X 768 to 800 X 600 as default, and now i can't increase it over 1024 X 768. Device manager shows that now both the Intel HD Graphics 3000 and Intel Display Audio cannot start due to error: "Windows cannot initialize the device driver for this hardware. (Code 37)" Or any way to at least clean install the OS so I can get rid of this problems?
I will contribute for the first time. The setting and the program Compatibility assistant who invalidated the program Compatibility assistant were deleted now. Then, the error of having failed in the initialization of phase 2 was output to the event log.
It is not found even if searching for a solution and I want to get help of everybody. When understanding the reason why the method of settlement and the error come out comes,I would like you to teach.I am sorry a little information.
My brand new computer I just built is crashing and restarting without a reason I can find. My System health report won't be very accurate because I need to run OCCT stress test in the background to slow down the amount of times it crashes.
I have run memtest for 12 hours - No errors. My CPU is cooled by a H100 - temps never go above 40c even under load. CPU - i5 - 2500k MOBO - Gigabyte GA-Z68X-UD3H-B3 PSU - Antec 750w
Even on a fresh install it will crash during the setup phase, like where you put in product code and username. Leading me to think its a Hardware issue.
I am trying to install Windows 7 after getting attacked by some virus. So formatted the system C Drive. Now there is no OS. When i tried booting it from a bootable Windows 7 DVD, it gets installed almost, expanding files -- 100% but at the end i receive this wierd error."Windows could not prepare the computer to boot into the next phase of installation.To install Windows, restart the installation."
I've got a Gigabyte GA-EP45-UD3P mobo, and am trying to do a clean install of the Windows 7 trial edition. I was getting access errors, so after moving my memory around, and trying different sticks, I've come to a configuration which is getting me through that problem, but I've reached another problem.After the fourth step(I believe they are "Copying files, expanding files, installing features, installing updates"), the computer hangs for a minute or so then gives me the error message "Windows could not prepare the computer to boot into the next stage of the installation. To install Windows, restart the installation."I've retried this three times to no avail, and googled the problem, but the majority of the answers I am finding for this are for people upgrading from Windows Vista
I'm looking to upgrade my CPU and Motherboard from what I currently have.I recently purchased a GeForce GTX 680 but I am seeing minimal improvement from my previous GeForce GTX 480, and have come to the conclusion its my CPU holding me back.
Current specs - OS - Windows 7 Home CPU - Intel i7 930 @ 2.80GHz Motherboard - Gigabyte X58A-UD5
I have been told in the past I cannot replace one and not the other due to my CPU/Motherboard being 1366 pin which is no longer in make.
I just got a new mobo and CPU and was wondering if I will need to reinstall windows with this. I have read different things, some said you can just repair others say complete reinstall.
low computer knowledge person here and I have recently come into a problem after replacing my mobo/processor/gpu from my old computer. After hooking up the computer and booting it up, it hits the mobo screen then quickly goes into the black screen that says that windows 7 can not be started and gives me the two choices of system startup restore and start windows normally.
Starting windows normally unfortunately returns me to the black screen and so I tried out the restore but to no avail it was unable to fix my problem.Also, I was stupid enough to not transfer any files from my hard drive off to a backup.
My two questions are if it's possible for me to put my hard drive in a friends computer and take the files off there and also if there is any way to fix my hard drive after changing motherboards.
I just built my PC (first one, sounded like a good idea at the time) and was told that getting the latest drivers would "fix" this issue. Problem is, I haven't had a PC or really been on the net since 2001, (don't laugh) so.....I don't know how to get the "right" ones. I realize that i've built something waaaayyy over my head/experience level, so now I just want to learn all that I can.
OEM pc MOBO died, replaced MOBO, windows having trouble booting (expected). attempting repair with no results but FAIL. I am noobish, so I ask, what can I use to help the repair process? PS: I upgraded my OS out of the box From win 7 home premium OEM install, to Windows 7 Ultimate x64 via disk. I also have win 7 premium (full) on disk from another PC i installed it too. I would do a clean install, but I can't lose any of my photos and data.
I have an asrock 775dual-VSTA and I recently upgraded to Windows 7 Ultimate, 32bit.
Things seemed fine, but I realized my USB was performing very slowly.
For example, it takes hours and hours just to upload a few albums to my iPod.
I presume it's a motherboard driver problem. Does anyone know of a fix for this? I dont see any Windows 7 drivers from Asrock for this Mobo.
Im *really* hoping I dont have to buy a new one.
Here are some screenshots from my Device Manager. As you can see, USB seems to be fine, but there are those unknown devices that I have no idea what they are. As far as I can tell, everything is working fine except the USB speed so I presume these unknown devices are related?
If device manager is happy that Windows 7 has managed to find drivers for everything automatically, would the team recommend leaving well alone or going for the mobo vendors drivers?
(I ask because all was well until I installed the Asus Windows 7 drivers for my P5Q...)
- ASUS M4N68T-M LE V2 MoBo - Processor is AMD phenom II X4 965 Black Edition. - One Stick of 2Gb memory DDR 3 - ATI Radeon 6870 Sapphire.
If I restart my system (and this happens like out of 100 restarts 97 times) the system would be on the black post screen and say that the CPU is not compatible with my mobo. Then in order to resolve this I have to got to BIOs and turn on all the cpu cores and the unleashing mode under CPU and restart. Then it would reflect that all the **4 cores are active** and then it would work fine. But why does this happen after every restart. I thought it was CMOS battery but the date and time and other BIOS settings are fine.
I know that since during a windows installation, certain libraries are installed specifically for certain types of chipsets/cpu's and that an abrupt hardware change can cause failures. I read on an article somewhere that you can migrate windows without hardware errors if you manage to get windows to operate on a politically correct mode similar safe mode to boot up with minimal functionality before installing the appropriate drivers for the new board.
ok, sounds like a stupid question, i know, but if i purchase them by ende of tomarrow i get 25% off, and i plan on upgrading mobo soon. i have been generaly informed on another post that 1600 in 1333 should work, it will just operate at 1333 speed, is it the same with 2133?
I bought a scythe fan for my case to go on the side, i've tried plugging the 3 pin connector into the PWR_FAN(3 pin) and CHASIS_FAN(4 pin), it gets detected in the bios and in speedfan, and various other software to monitor the fans.
Its running at 3,000 RPM which is way to loud for me, i've tried ASUS AI suite, amd overdrive, speedfan ect to try and turn down the RPM but none of them effect it, its going at 100% non stop and wont slow down no matter what, and even in the bios when i selected 'silent' mode it did not budge in speed at all.
Mobo: ASUS M4A87TD EVO AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard Fan: Scythe DFS123812-3000 "ULTRA KAZE" 120 x 38 mm Case Fan
Anything i can do to make this software or bios adjust the fan to the correct speeds? If i bought a hardware fan speed controller would that work? I was looking at something simple like this: Newegg.com - Sunbeam PL-RS-PCI Rheosmart PCI 20W Fan Controller
But i'd rather not buy if my Mobo or some software can adjust the speed for me.
recently i bought a new mobo and CPU. now that everything is installed its telling me i have 16GB of ram installed, but only 8GB are usable.... here is my new processor, AMD FX-8350 Vishera 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor here is the new mobo..ASUS SABERTOOTH 990FX R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS?G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory its the same type of ram i have now.. i'm noticing that on the mobo, unlike my old mobo, the slots are different ----alternating---- colors.. where my old board the colors were paired together.... should i be placing the ram in a certain way?
I have the above mobo, just installed windows 7 64bit. Everything else is fine but I cannot get the sound to work even though when I test or play music I see the bar rise and fall. I have exhausted everything I know to do. I did see the CM6501 thread here but after trying the drivers, it still does not work and when I click the CM6501 icon, it freezes the PC and I have to reboot.
In a few days I will be upgrading from my AMD 965 Black and Gigabyte GA-870A-UD3 to an Intel i5 2500k and GIGABYTE GA-Z68XP-UD4. I was curious as to what you all thought I could do to minimize effort and problems restoring my system settings, programs, and data files after a clean install of Windows 7.I currently have 3 HDDs; A 640GB for my OS (C: ), a 1TB for Programs and User files (D: ) (Pics, Docs, DVDs, etc.), and a 500GB (E: ) for Win7 backups. I also have a NAS (\NAS) with 500GB. At this point I have good User File backups on E: and am now creating IFW drive images of C: and D: onto the NAS. I have also generated reports from SIW (Hardware, Software, and Network) and Win7's System Settings from the Advanced Tools control panel.