My motheboard is an Asus P8H67, like this link: url...How you can see it have 2 SATA 6gb/s connectorsMy hard disck is a Seagate Barracuda Green 2T 6GB/s, like this link: url...The hard disk is connected in a Sata 3gb/s connector. Can i turn it on the 6GB/s connector?
View 1 RepliesI have replaced my ASUS P8 Z68-V/GEN3 with an Intel Desktop Board DZ77SL-50K and at the same time the primary hard drive has changed from a 1TB Seagate Barracuda to a 3TB Seagate Barracuda. The new system is working fine apart from that the 1TB Seagate Barracuda does not show up in Computer, Disk Management, MiniTools partition management, DiskWizard or anywhere else no matter which SATA cable, SATA port or computer is used. Consequently, I am unable to retrieve any files from the old HDD which is disastrous for my business. How to retrieve any number of files from the unrecognised HDD.
View 8 Replies View RelatedI went to Fry's and got a Seagate Barracuda 1TB 5900 RPM Hard Drive. I plugged it in as soon as I got home and it didn't show up in 7. I'll see if it wants to work with XP or Ubuntu, but I don't have high hopes.
View 5 Replies View RelatedHad Windows XP installed on an old Seagate Barracuda 7200.7 120GB.Formatted the drive for a clean install from Windows 7 DVDNow I get this:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
It is, and yes it can. And why is it even saying this when the installer can format and partition this drive till it turns blue.It gives me the option to "Load Driver" but there are no drivers for this HDD, it's all pre programmed in the motherboards.
Problem with my acer m4 series computer. I recently installed backtrack linux and then fedora onto my seagate barracuda st3500418as hard drive. Now I deleted the partition containg grub and the extended partition containing fedora. My windows 7 installation was corrupted all along the way.I want to repair or freshly install windows but it says I need to load my own drivers. Whenever I boot into safe mode or start windows regularly, it flashes a blue screen and then reboots. By the way, I have the installation disk.
View 10 Replies View RelatedUsing Windows 7 Ultimate 64-bit. W/ASUS P7P55D Deluxe board. Very stable and non buggy. Computer was running great with multiple drives. I substituted one of my 1TB drives with a brand new Seagate 3 TB drive. With the new drive hooked up, the computer will not boot and gives a message that there is no hard drive detected, put media in and hit the key. (something to that effect).
If I enter the bios in the condition, it shows all the drives in their correct order and the boot sequence is the first hard drive, CD, etc. It has detected the new drive as drive #3. But it will not boot. But, if I disconnect the new drive (power and SATA connector), the compute will boot up fine. I have checked all the connectors ad they seem fine. Is there something about the sequence in which the SATA connectors have to be connected?
I have an LG Super Multi Optical Drive SATA that was working fine. Suddenly after a few reboots back the read/write green LED is flashing, eject commands wont open door - manually able to open it and device is not being listed in device manager or explorer Win 7 64 bit.
View 5 Replies View RelatedI haven't been able to get the Vista 64 drivers to work for my Razer Barracuda AC-1 sound card. I didn't know about the driver signing conflict, and tried to install. When the OS kicked it out, I tried to find a way to disable driver signing. While I appear to have stopped the check, uninstalling and installing the drivers is still not working. I seem to have the drivers permanently flagged by Win 7 as unsigned.
Does anyone have any recommendations for trying to get my card working?
I own a Barracuda AC-1 as well as a HP-1 headset. I had this set up in Windows XP 32bit and got it working brilliantly?However, I recently purchased Windows 7 64bit Home Premium. I installed it this weekend but I have been having trouble setting up the soundcard and headphones to get the same result as I get in Windows XP. I have installed the Windows 7 64bit (Compatible) driver. This time, however, there is no Barracuda AC-1 Control Panel (green and black screen) which normally allows me to make specific changes to the audio. I have only been able to select and test the speakers within Windows 7 Playback Devices. I have played with Quadraphonic, 5.1 and 7.1 settings and still have been unable to achieve the same result as achieved in Windows XP. In fact, if I play some music it only plays through the front two channels as I tested turning down the front channel volume on the headphone volume controller and this turned off all sound.how I can achieve the same result as achived within XP where I have a AC-1 Control Panel (green and black screen) and achieve full sound through all channels.
View 8 Replies View RelatedSo every since I switched from window xp to window 7, my razer barracuda sound card driver does not detect 5.1 speakers. The option to change the DB for each speakers is not there anymore. Is this because the driver for window 7 is not out? Or is it window 7 in general and I need to change some settings. Please let me know what it is! :]
View 16 Replies View RelatedVery little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application for such a job plus, it is extremely fast.Anyway, while he was diagnosing my boot-up issue he discovered I had a malfunctioning network card; while removing this, he noticed all the SATA settings were set to SATA 2.When he reset these to SATA 3, the PC would not start-up! When he set them again to SATA 2 there was no problem and it worked fine?
View 9 Replies View Relatedi want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies View Relatedi purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies View RelatedMy MB supports only SATA 2 but in my city, the HDD SATA 3 is more cheap than SATA 2. If I buy the HDD SATA 3 it will work with my MB SATA 2 controller?
View 5 Replies View Relatedi'm looking to upgrade from a HDD to SSD. I've been reading online about my board and apparently the marvell 9128 controller sucks speed wise. I was looking at the Corsair Force 3 because of the read/write speeds. Upon doing more digging though it looks like id be better off running a drive on the SATA 2 ports.
View 2 Replies View RelatedThe hard drive in my son's laptop has died, it's a SATA 1 (1.5Gb/s) drive. Can I upgrade it to a SATA 2 (3.0 Gb/s) hard disk?? It's in a Toshiba laptop.
View 7 Replies View RelatedI was wondering If I have one sata 1 and an new sata 2(or 3) on my PC installed on my PC will cause problems in transfer speeds? My Blue-ray is sata 1 also.Does this mean that all disks will work as sata 1?
View 2 Replies View RelatedI bought a 500W PSU for my computer. It was too big for my apparently shorter than standard case, but when I was building my computer I flicked the red switch on the back (the europe to US voltage one) with it switched on (but the system wasn't functioning). There was a big green flash and a slight pinging noise.Just wondering, is that PSU totally done for?
View 9 Replies View RelatedI have a Samsung Rv515 Laptop upon trying to acsses devices & printers to view my printer to make some adjustments. When i try to open devices & printers the progress bar at the top which a green strip runs along gets near to the end then just hangs cosequently it wont open.
View 4 Replies View RelatedI have installed all the software drivers.I have reinstalled the video drivers too but i get this green color texts which disappears and returns to normal if i refresh or highlight over the text.
View 9 Replies View RelatedI've noticed lately whenever i start my windows and refresh my desktop i see green dots in the middle of my desktop icons.. i ran anti-virus scan and did everything but it won't go away.HP pavilion Dv6Win7 home premium i72GB graphics, 8GB ram2.20GHz CPU64bit OS
View 3 Replies View RelatedMy laptop screen is looking green
View 1 Replies View Relatedabout a week ago i dl'd windows updates, after that most videos (99% Internet) on the web have a green bar on top and the some colors dont line up correctly. i uninstlled adobe flash player 11.xxxx and re-installed it but still nothing, i did a full system scan and still nothing. i do not have a restore point (i know, stupid) ive included a pic of my problem and a link to the article so you can see for yourselves that the video should not look the way it looks in the pic [url]
View 4 Replies View RelatedThere are random pure green pixels appearing and disappearing on my DVI-D monitor.They only appear when something is moving such as a video, or the Minecraft main menu background, but I know they aren't dead, because they move when I move the window.If it matters i also have a VGA monitor hooked up to the same PC, and it is working fine, I'm using Windows 7 Home Premium, I tightened the cables and everything, My GPU is two AMD Radeon HD 6530D Graphics chip, and the monitor i'm using with the DVI-D worked perfectly with VGA.
View 3 Replies View Relatedi have a problem that my computer freezes with green lines on the screen and ive done several checks on the hardwares.. and the store where i bought my computer.. already did a replacement on my video card, RAM and motherboard and did a several stress test on the computer and didnt freeze at all and when time i bring home my computer it freezes up on me at random.. no specific time.. i have
ASUS p5g41t-m lx3 MOBO
nvidia gt200 1gb 512bit
1 tb of hdd
4 gm of RAM
huntkey 550v PSU
windows 7 86x
and a ASUS LCD AL series..
just wanna asked if theres any possible problem that my VGA cable or the LCD itself has a problem..
what "memory tree goes green" means in Chromium change logs? I see it every so often. But I don't have a clue what they are talking about!
View 2 Replies View RelatedIn the "From" column of Windows Live Mail, there is a small green arrow over the envelopes on some emails. What does this represent ? I have tried looking about everywhere else without ANY success~~~
View 3 Replies View RelatedI have a strange problem. The names of some files and folders appear in green! Does anybody know why and how to get rid of this strange thing?
View 3 Replies View RelatedI kept a few hidden files in a USB drive and later in my machine windows 7 OS was reinstalled..when I tried to access it again, all files and folders coming as green and not accessible.
I tried a few things like right-click and turn off "Encrypt content to secure data", or adding my account and giving full permission. But nothing worked.
im wondering if anyone has done this, if so, if they could share how. or if you know how it would be done. from what i onderstand its more than just replacing a few LEDs, but i might be wrong
View 2 Replies View Related