I have a problem since I installed Windows 7 on my laptop.Whenever the laptop automatically goes to sleep or hibernation mode while the lid is closed, it wakes up with the screen black. The only thing I figured out to do is switching it off and starting it newly then. I already updated my graphics driver (ATI Radeon X1200 Series). Maybe there's a problem there because the Catalyst Control Center which is apparently supposed to configure the graphics does not work together with the most current driver. But except for the black screen I never had a problem with that.
I recently built an HTPC and it was working OK until last night. I�ve been using it mainly as an OTA DVR and it does wake up, record, etc.I went to program a recording & it was already awake & the HDD indicator LED was on. However the HDTV had a black screen with a message to select boot device & press any key. This was not a BSOD but a black screen. There was no way to select anything as every time I pressed a key the same message displayed another time. I finally powered off.Another program was scheduled to record at this time but it should not have. It was a series schedule set for new but this episode was not. That�s one strike against the EPG. Anyway it started recording after I booted back up but it was missing the first 40 minutes because I booted up 40 minutes into the program.
his problem started with XP and I decided to upgrade to win 7 pro.
My PC has a black screen on wake up more times than not. Wake up is set for a login screen normally. My settings are screen saver after 10 mins then send screen to sleep in 20 mins, no hibernation mode, rest machine remains alive, runs 24/7 normally.
I have swapped the power supply and graphics card with ones that work in the same model PC and no joy.
Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
this morning I woke up to find my laptop was active and I was worried it might overheat now the past few days it has been doing and I did some research, and I am wondering should I make it so that tasks can't wake the machine up?
I have an ASUS Zenbook UX21E, 128SSD, 4GB RAM, running Windows 7 Home Premium 64 bits.I'm having a problem with Windows crashing and rebooting after waking up from sleep or hibernation. It manages to show the welcome screen (whre you put your password) but after a few seconds it reboots.i'm attaching the Windows_NT6_BSOD_jcgriff2 folder & the PERFMON HTML files. My System Health Report file is in Spanish, I hope it is still usefull. Further information:
- Windows OEM versi, original installation. - I have uninstalled all ASUS utilities related to power management - The computer is from january 2011.
The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.
The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.
I have already tried: displayswitch /extend displayswitch /internal in a .bat file
using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.
Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)
We have about 500 laptops with win 7 pro x64. We have had a few complaints that on occation, after a computer wakes up from sleep mode, the user sees the welcome screen, but no text or logon box - i.e. they can't se any text or textboxes, only the background image of the welcome screen. The only way to end this state is to poweroff/reset the machine.
Windows 7 laptop set to turn off screen after a few minutes of inactivity using Windows 7 power options. Sometimes the screen turns on/wakes up while in this state seemingly randomly for no reason.
It's running an Opera session, gadgets for weather, CPU monitor, and calendar. Sometimes runs other apps but that doesn't seem to affect this behavior at all.
No notifications pop up when this happens, no errors. No viruses, CPU usage is very low (single digits). No new applications installed, nothing really installed besides windows updates and Opera update (this didn't change anything). Nothing obvious changed since before this started happening besides these updates. No graphics driver updates. Windows 7 install is about 5 months old.
When I put my computer in hibernation, sometimes when I wake it, it hangs at the user select screen, or it just shows a black screen. Sometimes I can reset the computer after it has hanged, and try again resuming from hibernation, and many times it will work after a couple of tries. Other times after resetting I won't get the prompt to try again with resuming (the other option is to delete hibernation data and reboot the system) but I will get the usual screen that says that Windows was not shut down correctly (with all the options for safe mode, etc). If I cannot resume and I get the screen with safe mode and all the other crap, I finally log in I get a notice that there was a critical error, in the details I see BlueScreen and other data, but I actually never get a blue screen. In the dump folder, there are no dmp files related to the hibernation hanging.
Anyway, when it happens, I see several Event 18 WHEA-Logger in the event viewer, about 6 of them every time.What's weird though, is that I literally have NO problems with this computer other than this. The only times it hangs is when I resume it from hibernation. I can play games or run stress tests with or without overclock and the system is 100% stable. But there is some problem that prevents it from resuming from hibernation correctly, so every time I use it is basically a gamble because it has like 50% chance of working.I tried EVERY SINGLE solution I found with google related to hibernation problems, and it's still there. I even formatted and reinstalled Windows from scratch, and it's still there. I'm positive I updated every single driver for every hardware I have and nope, no solution.I know the WHEA error is related to the hardware but like I said, everything works PERFECTLY once the system starts up properly, or when it resumes from hibernation properly. [code]
Another problem with this damn windows 7. Had problems with my windows 7 going blank in my previous post but now i put my laptop to sleep; switch it back on and when i log in, it does blank but you can see and use the cursor but it keeps flashing. alt-ctrl-del is still available. just performed a scan with kaspersky and no problems. can anyone help? anyone experience this?
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
My computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit Processor: intel core i5 3.20 GHz Ram: 8 GB Graphics card: NVIDIA GeForce GT 220 Graphics card memory: 0.5 GB Any other ideas?
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
I just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.
I have a Toshiba laptop running windows 7. It has been running like a well oiled machine since the day I got it.I turned it off to watch TV, then when I turned it back on, the screen shows the Toshiba screen for about 1/4th of a second and then goes black.If I hit F8, F10, or F12 nothing shows up.
I have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
While attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
i have an HP Pavillion dv7 with windows7. It is less then 3 months old. Problem- Yesterday the screen went black while i was watching a video, but the sound kept going. so i restarted the computer, and the screen works until you get to the login screen it goes black again. SO i called customer service at hp, and we worked on it for an hour.THe one thing that seems to work is when i go to the device manager, uninstall the display adapters, and restsart in normal mode, then i go and reinstall the ATI device thing in the recovery manager, but everytime after i reinstall the ATI display device thing, it ends up going black a little while later again. lol
yesterday when i was making log out from my computer, there is no log out screen!! just black screen and mouse cursor, and when i did restart again , no logon screen appears or no any thing in screen , just black screen and mouse cursor too.I was tried every thing and no difference :safe modestartup repairrestore to some point (i dont have a point)upgrade windows or reinstall iti think the things maybe was made this poblem are :i was edited userinit.exe value from registry by deleting the comma from the end of its value. i used Windows 7 manager to make some clean and fixes some things on computer.
I'm running Windows 7 Home Premium.As I brought my computer out of sleep mode the computer had crashed with the screen showing vertical, multicolored lines that vaguely resembled gray.I had to hard restart my computer and after the splash screen, the login screen with all the users never appears, nor does my cursor.Nothing is on my screen except a faint glow indicating that it's active.
Whenever the Windows loadscreen passes the screen goes black and I can move a cursor around the screen. I have had this happen before and fixed it with bootrec.exe but I can't seem to get that to work this time. Safe mode has the exact same black screen problem.I have done chkdsk and sfc scannow - Didn't fix it.When I boot into Kaspersky Rescue from a USB drive it mentions that I need to shut down windows properly before continuing. I would like to do this but I can't.I have tried changing the active partition on information in some of these other threads - It didn't seem to work.All disks are healthy according to the DISKPART and Partition Wizard. I have done the HP hardware diagnostic scans and everything comes up fine.
Just purchased 2 new (refurb) PC's for my wife and I. It's all I could find with Windows 7 still available. They are both HP Pavilion p7-1233w 64 bit Desktops running Win 7 Home Premium SP1.During Windows setup of PC #1, it asked for a restart. When the PC powered back up, it had a black screen from the start (before the Post screen). I power cycled it several times with no luck. Even switched monitors and video cables. The next morning it started normally with perfect video.I assumed the Refurb PC had a problem and set it aside for return.Been setting up PC #2 for a few days now with lots of restarts. All was well, until I did a restart just now. There was the identical problem. Power cycled the unit twice, and still had the black screen.Then I unplugged the PC, and pressed the power button to discharge the capacitors (fans ran for a few seconds). When I returned power and started the PC again, it functioned normally. I've done 10 quick restarts since to try and replicate the problem, but it only happened that once.
I love these PC's, and I love Win 7, so I hate to give them up. But I don't want the video freezing up on me every time I do a restart. I assume now, that PC #1 is not necessarily defective.Since this is occurring before the post screen, I wasn't sure if it could be windows related.
