BSOD on an Acer Aspire 5750. It is pretty much brand new, but I have been trouble shooting this for about 3 weeks and have just now learned about the dmp files but am not yet good at reading them.
BlueScreenView seems to point to some kernel exe that is at the very core of Windows 7, but from what I have read it is most surely a driver as it only happens when waking up from sleep.
I've tried removing AVG using their removal tools and instructions. I've tried fully removing my video and mobo drivers with driver sweeper and installing the latest GPU and Motherboard drivers and flashed the latest Motherboard BIOS. I've scoured forum after forum and seen similar issues and tried countless solutions. I haven't seen someone with my -exact- problem and -exact- spec/error reports so I'm caving lol. I build and maintain PC's as a hobby and I like to solve problems on my own know-how but I am at wits end with this BSOD.
Quick specs:
Windows 7 Ultimate 64-bit
8 gigs DDR3 Gskil
AMD Phenom II X4 955 Denab
Nvidia GeForce GTS 250 (x2 SLI)
Asus M4N75TD nForce 740a Malwarebytes Antimalware
Machine: Dell XPS17 laptop (702x)Windows 7 home premiumWifi adaptor: Intel Wifi Link 1000 BGNRouter: Belkin F5D7634-4 802.11GReconnection takes 3 or more minutes to establish after sleep. Tried all the on-line advice e.g setting power scheme to max power; unticking box in adaptor settings 'Allow computer to turn off this device'.Tried to update drivers for wifi adaptor but the update process says I have the latest drivers. However Dell's driver site analysed my laptop and says there is a later driver for download. Tried installing this but was stopped by message saying it wasn't authenticated/certified so terminated.
View 1 Replies View RelatedJust built the girlfriend a computer:
Asrock Z77 Extreme4
Ivybridge i5 3570k
2x4GB Crucial DDR3 1600 DIMMs
OCZTech 600W PSU
Generic CDRom, Seagate HDDs mirrored, WD Primary HDD.
No GPU connected as she won't need one.
At first I tried a mild overclock at 4.4ghz and stability tested with P95 for a few hours with no errors at all. Everything worked fine!Come time for her to actually use it, of course, BSOD's ensued, followed by boot looping.Boot loop would not stop until one of the DIMMs was removed.Naturally I thought the RAM was the culprit and tested the sticks using Memtest86, 4 passes each with no errors.Next tried single sticks of RAM in each slot, booted up fine. Tried with two sticks (1&3, 2&4), and it seemed to work fine if booting from a clean shutdown (as opposed to BSOD).Reverted to default BIOS settings and it seemed to help a little, as in it would actually wake from Hibernate a few times, but then out of nowhere would BSOD again.I read somewhere that a bent cpu pin might do this, but since a single stick worked on each of the 4 slots, I think this can be ruled out.BIOS are upto date with latest 2.20 version as well.Right now the computer is working fine with only one stick of RAM, the last BSOD happened with two sticks in, opening up Photoshop and InDesign at the same time with stock BIOS settings.
Code: ==================================================
Dump File : 100812-23337-01.dmp
Crash Time : 10/8/2012 10:55:04 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`0013213f
[code].....
My computer fails about 1/4 of the time when waking up from standby (sleep). I've attached all the necessary files.
View 9 Replies View RelatedMy computer will BSOD after waking up from it's sleep. Now it wasn't a usual occurrence, it just lagged but lately it always went to blue screen after waking up.I checked, there are no Flash Drives plugged in, but the USB for the wireless mouse is plugged in but that never had any affect before.
View 7 Replies View RelatedSo i've recently been getting a BSOD in Windows 7 after waking my PC from Sleep. [code]
View 1 Replies View RelatedI sometimes will wake up my computer and it restarts itself, it gives me this error upon startup again.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000046
BCP2: FFFFF80002EFBEC8
[code].....
I just did a fresh install of Windows 7 64bit on my computer and am having a bit of a problem, whenever I put the computer to sleep and wake it up it gives me the BSoD with intelppm.sys as the cause. Does anyone know what this driver is and what it does, any update to stop BSoD etc... Before the fresh install it worked fine with no BSoD, I have check for viruses, I have also installed the drivers I installed before. [code]
View 9 Replies View RelatedI have a HP Pavillion dv6 which originally came with Windows Vista Home Premium x32, recently upgraded to Win 7 x64 clean install, and has been relatively problem-free. But, everytime laptop sleeps, I get a BSOD upon waking up every single time! updated all drivers to latest (compatible with win 7 x64). even updated BIOS. d
View 4 Replies View RelatedI have been getting BSODs after waking my computer up after stand by. I've tried Googling the situation as well as performing basic troubleshooting tasks such as sfc, chkdsk, virus scans... no luck. According to the event viewer, it says :
"The computer has rebooted from a bugcheck.
The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff8800f20044c, 0xfffff8800679e378, 0xfffff8800679dbd0).
A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 110112-8190-01."
I'm assuming its a driver problem, does BSOD only around every 5 times after I wake it from sleep mode.System Specs:Windows 7Home Premiumx64 bitOEMThe entire system is a little under 2 weeks old.
View 1 Replies View RelatedI've got a new ASUS gaming laptop with Windows 7 64-bit OEM and I've been getting a few BSOD errors while bringing my laptop out of sleep/hibernate. Its not always but its often enough to be a nuisance. My drivers are all up to date
View 4 Replies View Relatedmy computer has all of a sudden started to give me a BSOD about a minute after I wake the computer up from Sleep Mode. Also, if I leave the computer for more than 15 minutes I come back and the computer has frozen so I have to manually restart it. Every once in a while I've gotten the BSOD while I'm in the middle of doing something and it's been hours since it was in sleep mode.
So far I've tried to Restore my computer back to before the trouble started, and I've also fully uninstalled my video drivers (ATI Radeon HD 5470), and then installed the newest version from ATI's website.
My computer is Windows 7 64-bit, OEM version from Acer.
I have been getting BSOD on my laptop for over a month now. It only ever happens upon waking up from sleep, never when starting it up. I've tried to used System Restore but I don't have any restore points that go far back enough. I have tried resetting to factory settings but the same problem has happened again, not sure if it's the same incident because I'd have thought a reset would have solved it, so likewise I'm not sure another reset will change anything. I've done scans with multiple anti-viruses (obviously no two at the same time), and I apparently I don't have a virus. I thought it might have something to do with the registry so I scanned for problems in the registry in both CCleaner, but despite what it tells me, nothing has changed. I also did scans with AVG PC Tune-Up which didn't do anything, either. I was considering booting from an OS disk but I only want to do that as a last resort, and if it's going to work.
Aside from BSOD, other problems include the Flash container plugin crashing midway though Flash videos (which can't be down to Flash player, because I have the latest version), playback lagging in Media Player Classic Home Cinema, even though I have the CCCP codec pack installed, and lastly when playing games, sometimes the .exe will crash or the game will jitter, even offline games, even on low graphic settings, even with the latest graphic card drivers installed.
I am currently experiencing a BSOD after I put my computer into hibernate/sleep mode. Model: U46E-BAL6 ASUS, After I restart my computer, the windows crash report says the problem lies in my 080712-18283-01.dmp 080712-18283-01.dmp and a 2nd BSOD happened a little after, and the problem file is 080712-16395-01.dmp 080712-16395-01.dmp I have attached both files below, could someone take a look and solve the problem?
View 1 Replies View RelatedSome weeks ago I made a reinstall of my Win7 Home Premium x64 (a Dell M1330 with 4gb RAM). After then, my machine starts having random BSOD errors when going or recovering from sleep or hibernate mode. The error is a DRIVER_POWER_STATE_FAILURE, with code 0x0000009f.I attach here the info grabbed with W7F Diagnostic Tool, CPU z pictures and RAMmon html report. If it helps, here is the info I see with WinDbg looking the last minidump.
Code: Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump121412-26286-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code]....
Computer shows the BSoD when exiting Sleep mode and Hibernate mode too. I have attached the SF file.
View 6 Replies View RelatedI am running Win 7 x64 at my notebook Acer 5820TG (i5 430M, ATI Mobility Radeon 5650, 4GB RAM, 640 GB HDD). On a different forum someone checked my crash dumps and figured out that my BSODs are being caused by my Broadcom wireless driver (BCM43225).Basically, I get a BSOD whenever I put the computer to sleep/hibernate. NTB is trying for around 10 minutes go to the sleep/hibernate mode but after this time BSOD appears.I have tried a few different versions of my broadcom driver. Regardless, I still get a BSOD error. I have been using Windows 7 for over a year, and this only started happening on my last update of my notebook (SP1, VGA drivers, ...).
View 3 Replies View RelatedMy Windows 7 64-bit laptop crashes when I return to my computer after sleep/hibernate.
I cannot set up symbols on MS debugger (after many attempts) I have attached screenshots of cpu-z (both tabs) and my event viewer which lists 24 critical failures, all event ID 41: "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
p.s. Dunno if this is important but the machine is a Sony Vaio but I have uninstalled all sony bloat ware (except Vaio Control Center)
I am running windows 7 Ultimate rtm on an Acer Aspire 5515 and it goes into/wakes from sleep mode just fine. However when waking from hibernation, it logs in fine and then a minute or two later, it freezes forcing me to hold down the power button to shut it off. When booted back up, of course i get the option of going into 'safe mode' hit start normally and everything is fine.
I could just not use Hibernate but it would be convenient if when going to school, i could use hibernate so I still have all my battery power when i resume since sleep still uses a little of the battery up. Is there a fix for this or is it just a bug M$ will have to eventually fix through updates?
Video Adapter Name: ATI Radeon X1200 Series
Processor Name: AMD Athlon(tm) Processor 2650e
Frequency: 1600 MHz
Installed Memory: 1,789.98 MB
When the computer "wakes" from sleep all i get is a backround, I can move a mouse around but thats it. Windows 7 operating system.
View 5 Replies View RelatedEverytime my Windows 7 Home PC wakes from sleep mode, there's no internet connectionWhen I run the Troubleshoot Problem tool, it always has to reset the LAN which fixes the issue. How do I resolve this issue for good?
View 8 Replies View RelatedWhen I put my computer in Sleep mode, using the start button / shutdow / sleep it "sleeps" for about 10 minutes and wakes up on its own! Could it be programs trying to run in the background that wakse it up; Carbonite Backup or Norton? I can't get the computer to remain in sleep mode!
View 4 Replies View RelatedI have Windows 7 Ultimate x64. I just recently decided to start trying to put my PC to sleep rather than just let it run constantly when I'm not using it, and found that when I resume it, even if it's IMMEDIATELY after putting it to sleep, there is no sound.The only "fix" I've found is to either reboot, or (the quicker method) is to disable and enable the sound card in device manager. Sound then immediately returns.Obviously this is far from ideal and I'd love for it to just function properly. Any ideas? My sound is onboard Realtek HD audio on a Biostar A770E3 motherboard.
View 5 Replies View RelatedI have no speaker sound when the computer wakes up from sleep mode. (Realtec high definition audio). The only work around I can find is to unplug the jack at the back and plug it in again. Is there a way to solve this issue
View 5 Replies View RelatedI have a Lenovo e525 laptop with windows 7 ultimate x64 and a second hard drive where the dvd drive was, when I wake from sleep any of the following can happen: - It wakes but the screen is dimmed and the brightness buttons donīt work so I have to reboot. - It wakes to the screen off, I have to reboot. - It wakes then after up to 30 seconds an error pop up shows and the laptop reboots without shutting down. - It wakes then after up to a minute it reboots without shutting down. - It wakes fine and I can use it, 1 out of 10 times.
View 14 Replies View RelatedMy laptop just wakes up from Sleep, while on battery. It's soooo annoying! I have this info from a CMD command. Maybe, it's relevant?
Info: Command I entered on Command Prompt: PowerCFG -LastWake .
Result:
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
Wake Source [0]
[code]...
We have about 500 laptops with win 7 pro x64. We have had a few complaints that on occation, after a computer wakes up from sleep mode, the user sees the welcome screen, but no text or logon box - i.e. they can't se any text or textboxes, only the background image of the welcome screen. The only way to end this state is to poweroff/reset the machine.
View 1 Replies View RelatedI have just built a PC in the aim of using it as a Home Theather. I have a Media Center remote control and TV card, when I use the remote to put the computer to sleep it seems to work fine However when I use the remote to wake the PC, I get a reboot and unexpected shutdown message. This is also the case when I use the Start -> Shut down options -> sleep or hibernate. I have tried using microsoft debugger and the message I have been seeing is that, AverBas.sys does not have a timestamp and that its symbols can not be loaded. I got this far on my own but I have no idea what to do from here! I have attached the required zip file.
View 9 Replies View RelatedWhen attempting to wake up my wife's PC from sleep, the computer will hang for a few seconds at a black screen and then reboot. This is followed by the standard Windows has not shut down properly message asking if I want to launch into safe mode. This has been happening the past few weeks. It's Windows 7 64-bit. I've attached the results of the SF Diagnostic tool.
Stuff I've tried:
- Turning off hybrid sleep
- Uninstalling and reinstalling the Realtek USB WiFi adapter (network adapter problems came up on some google searches)
- Toggling USB suspend in power settings