Computer Won't Return Back To Sleep After Waking For Recording
Jan 13, 2012
I am running Windows 7 Pro 64bit and am having an issue with the computer returning back to sleep. At the moment, I have hybrid-sleep enabled, and if I schedule a recording while the computer is powered down in the hybrid-sleep mode, it will wake itself to record the program. However, I'd like the computer to place itself back into its previous state after the recording is complete. So far, I haven't been able to figure out how to do this. The computer wakes just fine but will not return back to sleep. I'll add that during the waking/recording process, the computer has not been touched to "wake" it up, if you will. Is there a setting in the power options that I need to check that I haven't seen?
View 1 Replies
ADVERTISEMENT
Jun 24, 2011
The computer will not return from waking. The machine is fully updated and power settings are correct. Mouse and keyboard have been enabled to wake the computer.The issue is one of several, sometimes the monitor will go to sleep and either completely ignore the request to wake, nothing happens no HDD activity light fans are active but show no change in speed with keyboard input. Or, the monitor will go to wake and looks like its receiving a signal (Monitor light will change from orange to blue) but remains black. Again with no HDD activity. Or if i turn my back for a few minutes (ALWAYS WHEN IM NOT LOOKING!) the screen will be a nice blue hue and will not show/accept any input. I've disabled hibernation and Hybrid sleep. Switch from S3 to S1 in BIOS. Im hesitant to keep the HDD from powering down since this computer will be used heavily by our sales staff. Put the computer through a very thorough diag and ll hardware passes. I also initially thought the problem was the system image and used another known good image to restore the machine.
View 10 Replies
View Related
Feb 9, 2009
I'm using Windows 7 build 7000, I have problem: When I put computer to sleep mode, and when I press any key to "Wake up" the computer, but it don't return.
How can I solve problem?
View 6 Replies
View Related
Jul 13, 2011
My Windows 7 64-bit laptop crashes when I return to my computer after sleep/hibernate.
I cannot set up symbols on MS debugger (after many attempts) I have attached screenshots of cpu-z (both tabs) and my event viewer which lists 24 critical failures, all event ID 41: "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
p.s. Dunno if this is important but the machine is a Sony Vaio but I have uninstalled all sony bloat ware (except Vaio Control Center)
View 4 Replies
View Related
Sep 25, 2012
Basically what happens is there's a sudden slowdown in computer performance. For example if I'm listening to a live stream, watching a video, or playing a game it will suddenly all go into slow motion for a few seconds and then return to normal speed. I know it's more of a global problem because I can see it happening with other programs, too. When a web page is loading the load speed may suddenly go very slowly for a few seconds, or even if I'm typing in Microsoft Word I'll keep hitting keys, and the keystrokes will be logged, but no words will appear for a few seconds and then it will suddenly have to catch up.
What I've tried to do: A friend suggested my CPU was overloaded, but I checked my CPU usage and it's always quite low, as in below 50% as far as I've ever seen. Someone else suggested defragmenting my hard drive, which I did using TuneUp Utilities, but if anything that made the problem worse, because now in addition to slowing down sometimes things will just stop for a few seconds, or web pages will time out but when I reload them they work fine. My machine: I'm using a Lenovo Ideapad, intel Core i7, 4 GB RAM.
View 1 Replies
View Related
Jul 25, 2011
My computer will BSOD after waking up from it's sleep. Now it wasn't a usual occurrence, it just lagged but lately it always went to blue screen after waking up.I checked, there are no Flash Drives plugged in, but the USB for the wireless mouse is plugged in but that never had any affect before.
View 7 Replies
View Related
Sep 23, 2011
I have a homebuilt system that I have had for a little over a year now. I am currently having an issue when waking my computer from sleep. When I wake the computer, I can see the machine turn on and start up (LED fans light up) but the monitor stays black. It stays like that and my only option is to do a hard reset.
After resetting the computer, it says its resuming windows and lets me login, but it runs very slow for a while. On my next restart, the computer "checks the disk for consistency", and then after that everything is normal again.
This doesn't happen every time I put it to sleep, but it has been happening a lot lately. I had this issue last year, but it just stopped, and i can't remember if I had done anything to fix it. I did not have this problem again until sometime last week. The only thing I did last week was I installed the new drivers for my video card and uninstalled/reinstalled MSI afterburner.
View 33 Replies
View Related
Oct 15, 2011
Recently I built a computer for my friend. After running it through some typical diagnostics, I concluded that it was fine. Two days later he called me and told me that the PSU was making weird noises. That's when his first BSOD happened. It was pretty obvious that the PSU was done, and he RMA'd it back. When the new one came back it was working fine, but after a few days he called me again and said that it was BSOD'ing a lot. I checked it out and it seemed to happen a few minutes after waking up from sleep mode. It happened every time. At first I thought it could have been a hard drive problem so he RMA'd that. When the new one came back it was the same story.
View 4 Replies
View Related
Nov 5, 2012
I don't know if it's Microsoft's bad OS or this crumby Korean computer - but it sucks to be back with Windows after a decade of Macintosh!This computer randomly fails to wake up. The mouse icon moves, but my screens are all black. I can control-alt-delete to raise the task manager screen. But then clicking does NOTHING.Windows is a **** OS. I hate it. It's always pissed me off since Bill Gates "created" it. Click click click - are you sure you want to click? Why don't you click some more? click click click. Would you like to click again? Are you sure you'd like to click again? And how about all those REALLY helpful popup windows.So thoughtful and caring.Oh yeah, windows. That's why. Such vision.Bill Gates has NO TASTE! I wish Steve Jobs was still alive!here are so many stupid bugs in this system.It reminds me of Millennium Edition. DOes anyone remember that BS? If I didn't need this shite for work I'd burn it. Or enjoy hacking it to bits with an axe.Can anyone help me sort this out? Or am I doomed to continually click stupidly until my tendons freeze up with carpal tunnel and my eyes fall out from staring at the ugly designs everywhere?Lastly, there's an infuriating naming bug - sometimes Windows 7, so intelligently designed, believes a file is open when it is not. Windows won't let you change the name of a file or folder if it believes a file in that folder is open. Brilliant. So, guess what? Yeah, I can't change the effing file name and have to shut down the computer. Since I work in a firm with a high volume of files changing names frequently, I can't tell you how much this pisses me off.Somebody get Windows to hire someone with creative vision who understands how to streamline operations! Someone teach Bill Gates how to paint a picture!In the meantime, I'm going to work on convincing my entire office to move to Mac.
View 3 Replies
View Related
Jan 17, 2012
My computer crashes right after it wakes up from sleep mode.I used MSDaRT to diagnose the problem, and obtained a Analysis.log file, but I can't figure out where the problem is.Here is a copy of the contents of the file:
Code: Opened log file 'C:Windowsmsdart_crashanalyzer_kd_ansi.log'
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available
[code]......
View 4 Replies
View Related
Oct 31, 2012
Over the past few months I began having this recurring problem where the computer goes into sleep mode, next I click the mouse to wake it and the lights and fans go on but the screen stays black. I then have to perform a hard restart where I was usually getting the "start in safe mode" screen, but lately I have also been getting BSODs.
View 5 Replies
View Related
Sep 18, 2012
my htpc is setup for live tv so it wakes at 3am to update the guide etc. i noticing every morning when i wake at 7am the pc is still on. basically wont return to sleep. if i start the pc from an off state and wait 15 mins it will go to sleep as per my sleep settings. but it wont after waking to update.
last wake confrims mceupdate is waking the computer, how do i check to see what is stopping it from going back to sleep. Nothing out of the ordinary is running.
I've went into multimedia settings and checked off to allow the pc to sleep even when sharing media.
View 1 Replies
View Related
Jan 22, 2012
I recently put together a new build and it's been working great, the only glaring problem I have is that when the computer goes into sleep mode, it won't turn back on. Specifically, in sleep mode it goes quiet, when I click mouse/press a key then the fans start up, sounds as if it's working, but the display remains completely black, and mouse laser doesn't turn on.
My system is:
- Intel i5-2500K overclocked to 4.2GHz (via motherboard overclocking utility)
- ASrock Z68 Extreme4 Motherboard
- Corsair Force 3 60gb ssd
- Asus GTX 570
- Corsair TX M600 power supply
- Corsair Carbide series 400r case (if it makes a difference?)
View 9 Replies
View Related
Aug 5, 2010
It will not honor the "Return to Sleep" timeout value that is in the registry - when the Power Plan is set to High Performance. If this plan is in play - and I need the machine to wake for - say - a backup at 2:00am...the machine will wake okay - and then NEVER go back to sleep.
View 9 Replies
View Related
Apr 2, 2011
I had a little problem with my computer opening .exe file. I had it made by mistake to open with Adobe Reader, but I managed to fix the opening part, but icons on the desktop still show the Adobe Reader sign.
View 6 Replies
View Related
Dec 10, 2009
I'm using HP Pavilion dv9000 notebook, and these are my power settings: The problem is that after my computer screen is turned off when I'm away, every now and then it turns on again. My computer is open all the time, and it bothers me especially when I go to sleep.. How can it be fixed? (There are no vibrations or anything that would cause the mouse to wake up the computer)
View 9 Replies
View Related
Apr 10, 2012
How to Change the Return to Sleep Timeout for a Unattended Wake Up in Windows 7 ?
View 0 Replies
View Related
May 21, 2012
I have a Win7 Ultrabook. I'm using Areca backup software to backup my personal data.I created a Scheduled Task to run my backup weekly.I set it so that it would wake from sleep to run the task. But I'm having trouble finding a setting to tell it to return to sleep if it woke itself up. Is it possible to do so?In the alternative, is there something I can insert in my batch file (the scheduled task runs a bat file) to tell my book to enter sleep mode?
View 2 Replies
View Related
Feb 15, 2012
When the computer "wakes" from sleep all i get is a backround, I can move a mouse around but thats it. Windows 7 operating system.
View 5 Replies
View Related
Jul 21, 2012
My computer fails about 1/4 of the time when waking up from standby (sleep). I've attached all the necessary files.
View 9 Replies
View Related
Apr 7, 2011
Everytime my Windows 7 Home PC wakes from sleep mode, there's no internet connectionWhen I run the Troubleshoot Problem tool, it always has to reset the LAN which fixes the issue. How do I resolve this issue for good?
View 8 Replies
View Related
Oct 12, 2011
When I put my computer in Sleep mode, using the start button / shutdow / sleep it "sleeps" for about 10 minutes and wakes up on its own! Could it be programs trying to run in the background that wakse it up; Carbonite Backup or Norton? I can't get the computer to remain in sleep mode!
View 4 Replies
View Related
Aug 27, 2012
I have Windows 7 Ultimate x64. I just recently decided to start trying to put my PC to sleep rather than just let it run constantly when I'm not using it, and found that when I resume it, even if it's IMMEDIATELY after putting it to sleep, there is no sound.The only "fix" I've found is to either reboot, or (the quicker method) is to disable and enable the sound card in device manager. Sound then immediately returns.Obviously this is far from ideal and I'd love for it to just function properly. Any ideas? My sound is onboard Realtek HD audio on a Biostar A770E3 motherboard.
View 5 Replies
View Related
Dec 31, 2012
I have no speaker sound when the computer wakes up from sleep mode. (Realtec high definition audio). The only work around I can find is to unplug the jack at the back and plug it in again. Is there a way to solve this issue
View 5 Replies
View Related
Apr 28, 2012
I have a Lenovo e525 laptop with windows 7 ultimate x64 and a second hard drive where the dvd drive was, when I wake from sleep any of the following can happen: - It wakes but the screen is dimmed and the brightness buttons donīt work so I have to reboot. - It wakes to the screen off, I have to reboot. - It wakes then after up to 30 seconds an error pop up shows and the laptop reboots without shutting down. - It wakes then after up to a minute it reboots without shutting down. - It wakes fine and I can use it, 1 out of 10 times.
View 14 Replies
View Related
Oct 8, 2012
I've tried removing AVG using their removal tools and instructions. I've tried fully removing my video and mobo drivers with driver sweeper and installing the latest GPU and Motherboard drivers and flashed the latest Motherboard BIOS. I've scoured forum after forum and seen similar issues and tried countless solutions. I haven't seen someone with my -exact- problem and -exact- spec/error reports so I'm caving lol. I build and maintain PC's as a hobby and I like to solve problems on my own know-how but I am at wits end with this BSOD.
Quick specs:
Windows 7 Ultimate 64-bit
8 gigs DDR3 Gskil
AMD Phenom II X4 955 Denab
Nvidia GeForce GTS 250 (x2 SLI)
Asus M4N75TD nForce 740a Malwarebytes Antimalware
View 9 Replies
View Related
May 8, 2012
My laptop just wakes up from Sleep, while on battery. It's soooo annoying! I have this info from a CMD command. Maybe, it's relevant?
Info: Command I entered on Command Prompt: PowerCFG -LastWake .
Result:
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
Wake Source [0]
[code]...
View 5 Replies
View Related
Nov 25, 2011
We have about 500 laptops with win 7 pro x64. We have had a few complaints that on occation, after a computer wakes up from sleep mode, the user sees the welcome screen, but no text or logon box - i.e. they can't se any text or textboxes, only the background image of the welcome screen. The only way to end this state is to poweroff/reset the machine.
View 1 Replies
View Related
Jan 21, 2012
So i've recently been getting a BSOD in Windows 7 after waking my PC from Sleep. [code]
View 1 Replies
View Related
Jun 28, 2012
I sometimes will wake up my computer and it restarts itself, it gives me this error upon startup again.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000046
BCP2: FFFFF80002EFBEC8
[code].....
View 3 Replies
View Related
Jul 3, 2012
I have just built a PC in the aim of using it as a Home Theather. I have a Media Center remote control and TV card, when I use the remote to put the computer to sleep it seems to work fine However when I use the remote to wake the PC, I get a reboot and unexpected shutdown message. This is also the case when I use the Start -> Shut down options -> sleep or hibernate. I have tried using microsoft debugger and the message I have been seeing is that, AverBas.sys does not have a timestamp and that its symbols can not be loaded. I got this far on my own but I have no idea what to do from here! I have attached the required zip file.
View 9 Replies
View Related
