Earlier I had two partitions, D(logical) and C(system). Now, I have added a new HDD and I've made two new partitions, B(logical) and S(system), now I want to format C and install Windows in S partition.
View 4 RepliesAs Windows tells me, "on EFI systems, Windows can only be installed to GPT disks". This is the error message I get trying to install a Windows upgrade from 7 Home Premium to Pro. I have to do a custom install because I am installing English over Russian. I have looked on the internet about how to change my partition system to GPT. Seems like something I can do, however, I have a question: If I have only one physical hard drive in my machine, is it possible the change the partition system from MBR to GPT? I see lots of examples of doing it to a second hard drive, but not many when it is the only hard drive. It is a new drive and clean, so I do not worry at this point about the data on it.
View 4 Replies View RelatedI'm sure there's probably a tutorial for this somewhere in the tutorial index but I can't seem to find it.
I have 3 partitions on my hard drive. C is for Windows 7 32 bit Ultimate, D is for Vista 32 bit Home Premium and E is a recovery partition. My problem is that I want to delete my Vista partition and then expand my 7 but there's one thing in the way.
D is my system partition. What I want to do is make C my system partition. Just as an extra bit of information, here's the status
E: Healthy, Primary Partition
D: Healthy, system, primary partition
C: healthy, boot, page file, active, crash dump, primary partition
i have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.
View 1 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies View Relatedmy C drive is going to be full and I have lots of free space in my other drives, how can I change the partitioning by a software without loosing data,
View 1 Replies View RelatedI currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies View RelatedThrough a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).
In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.
I'd like to
1) move/create the System Reserve partition to Disk 1 (with System C: drive)
2) remove the System Reserve partition from Disk 0 to free it all up as a data drive
Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
So I've got an ASRock motherboard that's about 3 months old and I'm running Windows 7. Earlier today, I started having a strange problem with the system time changing randomly. At first, I thought it was just a daylight savings time issue, so I disabled the automatic updating for daylight savings time. The problem still persisted. I also tried disabling the automatic time synchronization, but that didn't fix the problem either. I thought it may have been the CMOS battery, so I rebooted and checked the time in the bios. The bios shows the correct time/date. The only incorrect time and date is shown in Windows itself. After this, I tried updating the synchronization task to run every 5 minutes, but the clock is still changing to a different time. The time change is random, from around an hour to up to six or seven hours. The date doesn't change, just the time. My timezone is correct, and as the problem persisted without having automatic adjust for daylight savings time enabled, I can't see that it's the problem.Does anyone have any idea what could be causing this? About the only idea I have left is some sort of virus. But AVG and Malwarebytes haven't picked anything up. Is there some kind of software that gets auto-installed that can screw with system time?
View 7 Replies View RelatedSo, I have a disk with Windows 7 installed on the 3rd partition of that disk. I want to move that installation to the first partition of the disk.Repartitioning and boot settings aside, is there a way to do that? (besides using sysprep)Last time I tried that, windows would load slowly and after ''Preparing your desktop'' screen it would just show the one-color desktop, no icons, no explorer shell loaded.Alt,Ctrl,delete works, for running ''explorer'' from task manager, but computer, control panel or anything system-related does not open, instead it pops up an error window with, (e.x.)''{ED7BA470-8E54-465E-825C-99712043E01C}'' not found.
View 6 Replies View RelatedI have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies View RelatedI have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies View RelatedI have 3 hard drives on my laptop, i have vista on one, seven on the other and one with no OS on. After buying and installing seven today on a clear hard drive, and transfering everything of vista's hard drive onto my seven one, it was time to format vista.
Windows will not let me do this because of the dual boot setup, and the vista drive being shown as the system drive (see screenshot) can someone tell me how to change the system drive, so i can format my vista hard drive which isnt needed anymore.
What would be the easiest way to change my "System" - drive to C: ?
When I look at Disk Management the (Disk 0) Windows 7 Drive (C says (Boot, Page File, Crash Dump, Primary Partition) but not System.
the (Disk 1) (System) drive is F:
How could I change it to the (Disk 0) C: drive ?
I recently acquired a 60GB SSD and want to migrate my current system hard drive to the new drive. However, when I go to the Windows Backup manager to create a system image, it wants me to copy ALL of C partition and ALL of D, when it should only be C.D drive is full of a bunch of crap that I do not want included in the system image.If there even are system files on D, by no means is copying the entire partition necessary!Therefore, is there any way to make partition D NOT a system partition?
View 1 Replies View RelatedHow do I go about doing this? I have been searching google for a while now and all the hits I get are about how to show/hide them or about changing icons for task bar, which is not what I'm talking about...
View 2 Replies View RelatedI had Windows installed to the first partition on my drive (which is C:) and after a few years now it's gotten full of software I don't use anymore and the like. Rather than install Windows over it and starting over, I decided to install to another partition and get everything set up before doing away with the old one.
I got Windows installed and mostly everything I use installed and working. My plan was to create an image of this copy and clone it back to the original partition. That was my plan until I realized I had screwed up majorly. The second installation of Windows says it's installed to F: (I'm not sure why, since I thought each version of Windows installed sees itself as C:). Maybe because I started the installation from the other copy of Windows instead of booting straight to the install CD.
Now my question is... Is there any way to make this copy think of the drive it's installed on as C: or will I be stuck cloning it to a drive labeled F:? Thinking about it, it doesn't seem possible considering everything is looking to F: instead of C: on this installation.
Here is an image of my drive setup. C: is the old copy (where I want F: to go) [URL]
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies View RelatedI get an access denied error when I try to open my CDocuments and Settings. Although I am the owner of the computer I was denied permissions to open the folder. So, I changed the owner of Documents and Settings from SYSTEM to Fasih(HP-PCHP) and this is me. Still I cant access. Also, I wanna revert the owner back to SYSTEM, just in case to prevent anything stupid. So I retraced the steps and now.. I cant change the owner back to SYSTEM (strange).
View 1 Replies View RelatedIs there a way to hide a program that is running in the system tray, or possibly change the icon of the program in the system tray? I've tried changing the icon of the exe it self, and that did not work. Any other options/programs that allow this? I've tried a few programs to hide programs in system try, but none seem to work correctly on how I want. I want the program to still be running, but I dont want the icon showing up in the tray. I know that you can hide notification area through customizing the task bar, but thats not exactly what I want, unless I can change the icon of the program.
View 5 Replies View RelatedAfter a reinstall of windows home premium7(GA-P55A-UD4P MB, Seagate Barracuda 7200.12 HD,Bios setup for AHCI,(( regedit for AHCI done))windows didnot allow me to format the system partition(first time Ive experinced that). Everything seems to run great, so I dont know if "101MB Unallocated" also no drive letter is ok?
View 1 Replies View RelatedI am using windows 7 64bit and I want to install Fedora along with the windows.I partition my drive D: to 100GB which is total of 238GB of size for fedora O.S I partition it by this process.My computer--> right click--> manage-->Disk management. And then I shrink the new volume. The new drive will be created as I:But when I am going to install fedora. It didn't show that newly created drive i.e I:Why it is happening. I format that drive many times but nothing works. All it shows me in fedora that 238GB drive.Is there is a mistake in partition?The partition format is NTFS?
View 4 Replies View RelatedI recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies View RelatedI'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive
I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
I was trying to get a dual boot setup of Windows 7 and Ubuntu where I had 1 partition for Windows 7, another for Ubuntu, and a third neutral partition accessible from either OS where I would house all of my data. The problem is, my computer already had 3 partitions set up: Windows 7, the system boot partition, and one called PQService. Because I could not find a tutorial to delete pqservice, I decided to delete my system partition, even though this seemed a little more risky (apparently it was lol.) I used this tutorial: TeraByte Unlimited Knowledge Base to copy the boot files to the windows partition and delete it. I then booted into a Live CD of Ubuntu, and used Gparted to move my Windows 7 partition in order to get rid of the 100MB of unallocated hard drive space. I then attempted to restart my computer into Windows and i got an error saying that windows could not boot because of some recent hardware changes. Is there anyway I could get back into windows without reinstalling it? Do I need to figure out some way to restore my System partition? Is there someway I could get windows to boot without doing either of those?
View 8 Replies View RelatedI'm helping my brother to set up a dual-boot of Windows 7 & Windows 7. The reason for this strange setup is because my brother wants to have his own Windows 7 system, separately from his son who keeps causing trouble with trojans/viruses & online games. I have several questions before I do this. What is the fastest way of installing the OS twice with some basic applications on it? Is it possible to just re-image the first installation to the 2nd partition & make some changes on it to avoid reinstalling everything twice? It would save time a lot. But then, what changes should I make to the system to make it dual-boot? Will that be complicated or even possible?
View 5 Replies View RelatedI deleted my system partition and boot manager is not there and my laptop is not starting. What to do now. I want to get back my windows
View 2 Replies View Related