So I've got an ASRock motherboard that's about 3 months old and I'm running Windows 7. Earlier today, I started having a strange problem with the system time changing randomly. At first, I thought it was just a daylight savings time issue, so I disabled the automatic updating for daylight savings time. The problem still persisted. I also tried disabling the automatic time synchronization, but that didn't fix the problem either. I thought it may have been the CMOS battery, so I rebooted and checked the time in the bios. The bios shows the correct time/date. The only incorrect time and date is shown in Windows itself. After this, I tried updating the synchronization task to run every 5 minutes, but the clock is still changing to a different time. The time change is random, from around an hour to up to six or seven hours. The date doesn't change, just the time. My timezone is correct, and as the problem persisted without having automatic adjust for daylight savings time enabled, I can't see that it's the problem.Does anyone have any idea what could be causing this? About the only idea I have left is some sort of virus. But AVG and Malwarebytes haven't picked anything up. Is there some kind of software that gets auto-installed that can screw with system time?
I like to keep my BIOS time set to UTC, which works perfectly with Linux, but whenever I log into Windows, the displayed time is UTC even though I have set the timezone. When I change the time manually or with synchronization, it changes BIOS time itself instead of simply using it as a base for localtime.
Using Windows 7, every time I boot up the icon size and font is different size either , large or small. I want large, but how do I change to lar.ge and keep it that way (make it default). Windows 7 now gives me what It wants. No pattern
change the fade time of the wallpaper slideshow. I don't mean the time the OS waits before fading to a new wallpaper, I mean the actual time to transition from one wallpaper to another.
I spilt some water on my laptop a few days ago but fortunately it's completely dried out and working perfectly.... apart from this minor (but important) issue.
Problem: the system time does not stay correct. Even after manually updating the BIOS time and also even after manually syncing it with the various servers available under the time options.
Fix: set the internet time sync interval to every minute rather than its default setting? How do I do this?
P.S. This couldn't be a CMOS battery issue surely because even when the system is on and plugged in the system time still deviates from correct. (I assume the CMOS battery is only used when the system is powered off.) If I need it replaced, how does that sit with my Dell hardware warranty?
So anytime I set my date and time to the correct settings either manually, in the bois, or allowing to sync with internet time option, the date and time seem to adjust forward randomly but seems to be often 2-3 weeks. Not sure when it changes since I never catch real time but I've changed my time approximately 10 times now and it never sticks.
For some reason recently the desktop icons keep changing every time I restart my laptop.I set them up how I like them (under right click, view) on small icons, but when I restart they automatically set themselves to medium icons. I was wondering why this is happening and what I can do to stop it happening? [code]
In Outlook 2007 Calendar, the default reminder time is 15 minutes. That is, Outlook will remind you of each appointment 15 minutes in advance. In ToolsOptions., I've tried to set the default reminder time to a shorter interval. But no matter what I set it to--10 minutes, 12 minutes, 5 minutes--Outlook keeps reminding me of each appointment 15 minutes in advance. In ToolsOptions, there's a checkbox called "Default Reminder:" Whether I check it or leave it unchecked has no effect on the reminder time either--Outlook keeps reminding me of each appointment 15 minutes in advance.
Earlier I had two partitions, D(logical) and C(system). Now, I have added a new HDD and I've made two new partitions, B(logical) and S(system), now I want to format C and install Windows in S partition.
As Windows tells me, "on EFI systems, Windows can only be installed to GPT disks". This is the error message I get trying to install a Windows upgrade from 7 Home Premium to Pro. I have to do a custom install because I am installing English over Russian. I have looked on the internet about how to change my partition system to GPT. Seems like something I can do, however, I have a question: If I have only one physical hard drive in my machine, is it possible the change the partition system from MBR to GPT? I see lots of examples of doing it to a second hard drive, but not many when it is the only hard drive. It is a new drive and clean, so I do not worry at this point about the data on it.
I'm sure there's probably a tutorial for this somewhere in the tutorial index but I can't seem to find it.
I have 3 partitions on my hard drive. C is for Windows 7 32 bit Ultimate, D is for Vista 32 bit Home Premium and E is a recovery partition. My problem is that I want to delete my Vista partition and then expand my 7 but there's one thing in the way.
D is my system partition. What I want to do is make C my system partition. Just as an extra bit of information, here's the status
I have 3 hard drives on my laptop, i have vista on one, seven on the other and one with no OS on. After buying and installing seven today on a clear hard drive, and transfering everything of vista's hard drive onto my seven one, it was time to format vista.
Windows will not let me do this because of the dual boot setup, and the vista drive being shown as the system drive (see screenshot) can someone tell me how to change the system drive, so i can format my vista hard drive which isnt needed anymore.
I am having an issue with my system time. After reboot it reverts back a few hours. During the day it will also stop and freeze on a curtain time. If I install a third party time sync program it works ok. I have checked the Internet time server and it is turned on. I also set the net time server to automatic instead of manual.
How do I go about doing this? I have been searching google for a while now and all the hits I get are about how to show/hide them or about changing icons for task bar, which is not what I'm talking about...
I had Windows installed to the first partition on my drive (which is C:) and after a few years now it's gotten full of software I don't use anymore and the like. Rather than install Windows over it and starting over, I decided to install to another partition and get everything set up before doing away with the old one.
I got Windows installed and mostly everything I use installed and working. My plan was to create an image of this copy and clone it back to the original partition. That was my plan until I realized I had screwed up majorly. The second installation of Windows says it's installed to F: (I'm not sure why, since I thought each version of Windows installed sees itself as C:). Maybe because I started the installation from the other copy of Windows instead of booting straight to the install CD.
Now my question is... Is there any way to make this copy think of the drive it's installed on as C: or will I be stuck cloning it to a drive labeled F:? Thinking about it, it doesn't seem possible considering everything is looking to F: instead of C: on this installation.
Here is an image of my drive setup. C: is the old copy (where I want F: to go) [URL]
I get an access denied error when I try to open my CDocuments and Settings. Although I am the owner of the computer I was denied permissions to open the folder. So, I changed the owner of Documents and Settings from SYSTEM to Fasih(HP-PCHP) and this is me. Still I cant access. Also, I wanna revert the owner back to SYSTEM, just in case to prevent anything stupid. So I retraced the steps and now.. I cant change the owner back to SYSTEM (strange).
Is there a way to hide a program that is running in the system tray, or possibly change the icon of the program in the system tray? I've tried changing the icon of the exe it self, and that did not work. Any other options/programs that allow this? I've tried a few programs to hide programs in system try, but none seem to work correctly on how I want. I want the program to still be running, but I dont want the icon showing up in the tray. I know that you can hide notification area through customizing the task bar, but thats not exactly what I want, unless I can change the icon of the program.
I have DellGX280 machine ...i have install win7 than install all drivers than restart computer ...again detect vga drive.. every time i restart system the detect vga driver.
My ISP lmits my download to almost nothing, except for three hours in the early morning. I have a monitor in my notification area that tells how many MB I have left (this is from the ISP), and during the day with nothing running my MB slowly drops. I installed NetBalancer, to see where all the download was going, and all I can find downloading is Windows Update, and System Resources. At least for the most part that is.So my question is, Is there any way to limit Windows Update, and other Windows Systems to downloading only during those three hours? I have Windows Update setting set to only Install at 4:00am. But it still downloads during the day. So is there any thing I can do, a reg edit, or something?
I'm not talking about a clicking the 2 boxes next to the close[X] button in the top right corner, I mean literally clicking on a side of a window and dragging it to enlarge it will freeze the system. I've also been having random freezing and random rebooting issues ( no BSOD) for the past couple of weeks and unfortunately haven't been able to dedicate enough time to diagnose the problem. I'm hoping the recent discovery of this very specific cause to a system crash will possibly lead to the culprit of my problems.- Ran Memtest86 - No problems found- Prime95 - Temps seems stable while its running but wont make it past the 5-10 minute mark before freezing.- Bios up to date- GPU driver is up to date (anything else need to be up to date driver wise?)- Tried switching RAM posistion between both slots, timings are within spec
In my system I have three operating systems installed for me to boot into - Windows 7, XP & Ubuntu. Windows 7 is the default and probably even the most used one.The problem is that each time I boot into Windows XP, Windows 7's system restore points get wiped out totally. The same does not happen with XP though.
I am building a new system for a friend. I was wondering how do I enable the setup screen for a first time user after I have installed the OS and updated all the drivers and windows updates? Like how do I make it so that when I give him the system and he turns it on for the first time it'll ask him all the setup info like when you start a new computer for the first time.
any complete system backup software for win7 that works similar to the MAC time machine? I am looking for something that will back up every thing even software installed.
I was posting about my USB Problem in different forums and couldn't get it fixed.Someone said I should check the event viewer and noticed something odd around the time all my devices failed:[CODE]
Seems every time after power down and on again the next day, the system time and/or date are wrong. Noticed it first when Kaspersky software complained about being out of date right after updating. This doesn�t seem to happen as long as the machine is left on. What could cause that? The machine is only a few months old. Windows 7 Home Premium, SP1, 64-bit Intel Core i3-2100 CPU, 3.1GHz, RAM 8G
I tried to set up a dual boot system ( Vista Ultimate and Win 7 Pro) this aft and my computer he miraged and froze up. Finally got it working again but I don't know how, just luck. I followed the recommendations and made copy of Win 7 on ISO disk, I think it works but I'm not sure, and I unplugged the drive which has Vista on it and tried to boot. My computer froze solid even before it loaded OS file. Why do I need to unplug my C: drive? Is that the only way to do a clean install?
i use a software that requires me to hold the mouse button down for long periods of time. after 5 seconds the program looses focus and reports that it is not responding. i need to extend this time. this is a software transport control in an editing program.
There are now several ways of locking a computer to block things like internet surfing during a specific time period. I have unfortunately found a problem. All that one needs to do to defeat these programs is to change the system time. I use Kaspersky which allows blocking applications from operating. Is the system time controlled by an accessible software so that it could be blocked from being changed?
