Converted My Drive (non OS) To Dynamic
May 7, 2009I have a 500GB IDE (seconday master) (all my OS and other drives are on SATA) to dynamic. (it wouldn't being recognized by Windows 7, and in a hurry I converted it to Dynamic).
View 1 Replies
ADVERTISEMENT
Partitions Converted From Basic To Dynamic?
Jul 11, 2011I am building a new computer with 1TB of HDD. At first when I started to install an OS, a system volume was created automatically of 100MB size. Then I created another 200GB partition as C to install Windows 7 and 2 other partitions of 250GB. I wasn't allowed to create another one partition. After I finished windows installation, I tried to create partition in unallocated space using > New simple volume. The sytem warned me of dynamic volumes > accept it. Then eventually all 4 volumes were converted to dynamic in disk management window.
View 5 Replies View RelatedConverted HDD To Dynamic - How To Change It Back
May 2, 2012I had some partitions, as follows.
||SYSTEM RESERVED||WINDOWS 7||SHARED DATA||WINDOWS 8||
Next, I shrank the Windows 8 volume and made a new volume. My plan was going to be to clone the Windows 8 volume to the new volume, so I could add more storage space to my shared data partition. The problem is this: creating the extra volume converted my whole HDD to dynamic. That said, my Windows 8 boot was lost immediately. So, I just deleted the Windows 8 partition and the new one and merged all that extra space to my data partition. Now, will this mess with my Windows 7 boot at all? I'm scared to restart my computer. All of my partitions (including my Windows 7 one) are just simple volumes now.
Converted All Drives To Dynamic How To Revert Back To Basic
Apr 4, 2012well scenario is I got my new dell 15r laptop with windows 7 basic loaded yesterday.. so backed it up and wanted to put my old PC's windows 7 ultimate version on it. I installed it, while installation it allowed to have only 4 partitions.it already had 2 partitions1) Recovery - 15gb2) something i forgot ... some 40MBso i made a partition of 125GB for OSand rest of unallocated space ie some 660gb could not be allocated in more than one partition so i let it be unallocatedso after installtion got completed and OS started i went in disk management and tried to make that unallocated space of 660GB in 2-3 partitions.but it converted all my previous partitions also to dynamic. even recovery partitions.ow do i go back to basic partitions?? particularly about that recovery partition and my C: (OS partition) ??
View 7 Replies View RelatedAccidentally Changed Hard Drive With OS To Dynamic Drive.startup Fail?
Sep 23, 2010My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedHow To Convert Offline Dynamic Drive To Online
Jul 16, 2011my old hard drive is not displayed in my computer. But it is displayed as "Dynamic and offline" in computer managment. I have some important data to recover?how I can convert to online so as to recover the data.
View 1 Replies View RelatedWay To Convert Dynamic Drive To Basic Without Losing Data?
Oct 24, 2012I've 4 Partition created on my Hard Drive..!!1. System Usable Partition (Reserved for System by its own)2. Local Partition (In which Windows is Installed)3. Another Partition (for Storage purpose)4. One more Partition (for Storage purpose)So, when today I tried to shrink my one of the partition (except system usable & C Drive/Local Drive) the the Windows alerted me with the Message : "Your Operating System won't boot after changing the drive to Dynamic Drive" ....!!After this message appears I clicked yes..!!The partition is been made
View 10 Replies View RelatedConvert Dynamic Drive To Basic Without Losing Data?
Jan 19, 2013after shrinking my hard drive it has changed to dynamics and i cant even install windows on a different disk,what shuold i do?
View 2 Replies View RelatedUnable To Assign Drive Letter To Sata Dynamic Hard Disk?
May 26, 2012I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.
The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"
Everything Converted To Ink Cannot Access Anything
Mar 24, 2011i have an Acer Aspire laptop with Windows 7. im not sure why but all of my links, files, and folders have been converted to .lnk. i cant acess anything except for Recycle Bin and Windows Media Player (only if i click a song from the start menu).i can only get internet acess from a picture i downloaded wrong as a google chrome file instead of .jpeg. my question is how can i fix it?
View 7 Replies View RelatedDual OS Converted To Single OS?
Nov 7, 2011I was running Vista and Windows 7 as a dual OS on two HDDs. I have just removed the HDD with Vista on it and reverted to a purely W7 OS however, when I now bootup, I am still seeing the message on screen giving the choice of W7 or Vista.
View 3 Replies View RelatedConverted All Files To Pdf And Cant Open Them?
Dec 8, 2012I accidently coverted all my desk top icons to adobe readerand now I cannot open them because it tells me there is a problem with opening them ,how do I put them back to what they were
View 2 Replies View RelatedDynamic Disk To Basic Disk When Windows 7 Is Installed On Dynamic Disk
Mar 13, 2011so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View RelatedAll Icons Have Converted To Microsoft Word
Dec 6, 2011I sorted my desktop, and put the desktop shortcuts (Microsof Word, Excel, outlook etc...), onto task bar (next to start button) however I have come back to PC and they have all seemingly have converted to Microsoft word. When I open start menu, all my recent programs have again converted to word.When I have opened any of these a word document opens, a load of gobbildygook, as well as can not open in dos mode.I have managed to cercumnavigate word and excel, by opening one of my exixting files starting a new document and saving this to desktop, but can only do this with paint, word, and excel.
View 6 Replies View RelatedMy .exe Files All Converted To Vlc Media Player?
Jan 27, 2013I wanted to open a games downloaded through internet, but the game was not getting opened so i opened it with vlc media player, but all my other programs including microsoft office and windows getting started also got changed to vlc media player, now how to change all the programs to their original programs.
View 1 Replies View RelatedCan A GPT Boot Disk Be Converted To A Basic Volume
Feb 3, 2013I was setting up a Win7 new build with an Asus P8B75-V and an SSD. Although I previously have done clean installs with UEFI motherboards and SSDs, this time the install DVD created a GPT volume on the boot disk (much to my surprise and which I discovered opnly after loading all the apps, moving the email, etc, etc.).
Knowing a lot more about basic MBR volumes (and how to fix problems), I would like to convert the GPT to a basic volume. I have Acronis DiskDIrector 11 which can convert the GPT to MBR, but when I tried that, it rendered the disk unbootable. (The conversion resulted in a 124MB unallocated space, followed by a 100MB FAT32 volume (!?!?!), and then the rest of the drive as NTFS.)
Is there a way to convert a boot disk from GPT to basic and have it be bootable? Is there anything that can be done with the converted HD to make it bootable?
Desktop Icons Converted To Microsoft Word?
Dec 24, 2012I am running Win 7 andsomehow all of my desktop icons have converted to microsoft word. In fact all of the software in Programs have been hyjacked.Now I can right click on the desktop and selest "open with" then click on any of the choices available in the dropbox and this will change all of the icons. But still unable to open.The interesting thing is my wife (as another user) has not been affected by this at all. Business is good for her side of the computer.
View 2 Replies View RelatedDisk Converted To Simple Partition While Making New Partition, Now OS Won't Load
Jul 10, 2011I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies View RelatedCan A Bluetooth Running On Windows Xp Be Converted To Run On Windows 7
Jun 23, 2011have old bluetooth mouse on windows xp system; can i convert the mouse to run on windows 7
View 1 Replies View RelatedDoes Anyone Actually Use Dynamic Volumes
Nov 9, 2012I've been reading up on dynamic volumes, and while they are interesting, I wonder if they are actually used in the real world, and if so, more by enterprises than individuals?
View 1 Replies View RelatedDynamic Disk In Windows 7?
Oct 10, 2012I have been using computers for a while but just recently started to learn what is really going on. I am having trouble understanding what a dynamic disk is. I have read a lot online but I need a very very simple explanation as I am an older person and a lot of the explanations I read online use technical terms which I also do not understand. I think what I have is a basic disk and I don't understand what a dynamic disk is. Can you have a dynamic disk if you have just a single regular physical disk, and if so what is the advantage.
View 3 Replies View RelatedHow To Setup Dynamic IP Address
Dec 6, 2011How to set up a dynamic IP address?
View 2 Replies View RelatedFrom Dynamic To Basic Format
Feb 9, 2013In order to change back the format type of my system disk from Dynamic to Basic, I took a system image using Win 7 Pro System Image Tool and deleted all the partitions on the system disk, change the format type to Basic using the Command Prompt, and restored the image. Unfortunately, the format type restored also to Dynamic.Did I missed any step? or there is something wrong?
View 3 Replies View RelatedConverting From A Basic Disc To Dynamic
Sep 19, 2012I have been reading up on it from microsofts site as well as various places throughout the web. most articles were also a few years old might have been before windows 7 was even released.from what I understand you will only really have an issue if you are using windows 98, 2000 , xp and server 2003.What I am trying to do is make a partition but the only way to do it so it seems (I am using the admin disk management tool)is to convert to dynamic.I am creating the partition to install a small linux distro to use in dual boot but the part that is making me weary is the last step of the disk management tool says "the operation you selected will convert the selected basic disk(s) to dynamic disc(s). If you convert the disk(s) to dynamic you will not be able to start installed operating systems from any volume on the disk(s)(except the current boot volume.now I will (hopefully) never have to deal with those headaches called OS's again. So would I have any negative impact from this conversion? would i still be able to boot windows 7 with all of my data still intact?
View 8 Replies View RelatedHow To Change From Dynamic To Basic Disc
Jun 12, 2011i have a acer laptop having 500 gb hd. Isince i want to dual boot ubuntu with windows 7 i was planning to install it on Local Disk F so i shrink the Drive F for swap area required for ubuntu. I shrink it to 4500MB and new partition was created showing 4.5GB of space. Then i right click on it to create new volume. I keep on clicking next till a warning came.I click ok to that and my whole disk got converted to Dynamic disk. Now my problem is that my os is still booting even after converting to dynamic . I dont know how.
Since i have only one hd how can i use Partion wizard since i can't unallocate the whole HD.
Convert Dynamic To Basic Disc
Apr 22, 2012I wanted to make a new partition on my hp laptop on the only disc it hasso as to create a system image.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly. As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd)
View 1 Replies View RelatedDynamic Disk Creation In Windows 7 X64
Sep 14, 2011I have 2 x 750GB HDD's running Windows 7 x64. One of the HDD's contains data the other is blank. Do I have to format the drive with data on it to convert both drives to being a Dynamic Disk? I don't have a backup drive to move the data to whilst I create a Dynamic Disk so hopefully the answer is no?
View 2 Replies View RelatedRecover A Dynamic Volume In Windows 7?
Nov 19, 2012i have a single hard drive with 2 partitions. 1st partition with Windows 7 OS and the second strictly for data. yesterday i decided to try software raid using windows disk management. firstly, i added another identical but empty hard drive into the computer. boot it up and went into disk management. i right-clicked on the 2nd partition (data partition) on the original hard drive, and selected add mirror. after a few seconds, the disk management tell me an error "failed redundancy" on both my old 2nd partition and the hard drive i just added. so without thinking much, i decided to delete volume on the new hard drive (bad move!), and guess what, it deleted the new hard drive volume together with the original hard drive's 2nd partition (contains data!). now it is showing as unallocated space and i have not format nor create a new volume over it.(i think the data is still intact)
is there anyway to recover the volume?
*i know there is a fix within windows using dmdiag but that is for non-mirror volume(dynamic disk) only. also tried with easeus partition master but still unable to recover the partition as it is a dynamic disk.
*minitool partition recovery doesnt work either for dynamic disk..any other recommendation?
Dynamic Disc And System Reserve?
Apr 23, 2011after converting my internal drive to a dynamic disk, why can't it boot another os? i was interested in spanning volumes, and obviously in terms of optimized virtual raid the real issue is putting the windows partition on a raid volume, but simply put why can't i install a second operating system after i've converted a disc to a dynamic disc. is there anyway to forego that trouble? in short, i want to install linux side by side with windows on seperated partitions, striped mirrored or otherwise but not having a raid controller, vraid is the only hope i have and windows dynamic disc is telling me that i can't boot other os's except the currently booted system if i convert the discs. in fact after converting the drive initially, i couldn't even reformat and reinstall windows with the 7 disc. but in my experience, it's saying windows will no longer perform these functions but other discs and environments may not even recognize the windows os change so that the possibilities aren't closed to anything but the windows operating system.
secondly, if i installed something like lilo or grub, without linux let's say, could i delete the system reserved partition? i believe i've deleted it in the passed and not had boot issues or other noticeable trouble with windows, but i'm unsure what i had or would be doing in terms of long term os stability. i saved the reserved partition of a former install by assigned it a drive letter, opening it and saving the contents for learning purposes.
Windows 7 Does Not Boot From Dynamic Disk?
Oct 8, 2012i changed my disk partitions as dynamic disks in windows 7 home basic (accidently) After i install windows 7 ultimate. It cannot boot from dynamic disk. it shows blank screen. What can i do. how do i recover it. my system cannot boot.
View 2 Replies View RelatedDHCP Is Disabled But IP Address Is Dynamic?
Aug 3, 2012My network is set to automatically set an IP, and this has worked semi-okay for the past few days. It disconnects a lot but I can usually go to the Command Prompt and then release and renew my IP, which would normally fix it. So I did that today, only that time it said something about being unable to contact the DHCP server. So I then typed in ipconfig /ALL and it said the DHCP isn't enabled. I tried it again just recently, but instead I get a message saying that the RCP server is unavailable, but the ipconfig /ALL prompt still says the DHCP isn't enabled.
View 1 Replies View Related