Dynamic Disc And System Reserve?

Apr 23, 2011

after converting my internal drive to a dynamic disk, why can't it boot another os? i was interested in spanning volumes, and obviously in terms of optimized virtual raid the real issue is putting the windows partition on a raid volume, but simply put why can't i install a second operating system after i've converted a disc to a dynamic disc. is there anyway to forego that trouble? in short, i want to install linux side by side with windows on seperated partitions, striped mirrored or otherwise but not having a raid controller, vraid is the only hope i have and windows dynamic disc is telling me that i can't boot other os's except the currently booted system if i convert the discs. in fact after converting the drive initially, i couldn't even reformat and reinstall windows with the 7 disc. but in my experience, it's saying windows will no longer perform these functions but other discs and environments may not even recognize the windows os change so that the possibilities aren't closed to anything but the windows operating system.

secondly, if i installed something like lilo or grub, without linux let's say, could i delete the system reserved partition? i believe i've deleted it in the passed and not had boot issues or other noticeable trouble with windows, but i'm unsure what i had or would be doing in terms of long term os stability. i saved the reserved partition of a former install by assigned it a drive letter, opening it and saving the contents for learning purposes.

View 1 Replies


ADVERTISEMENT

Convert Dynamic Disc Back To Basic On The Only System Disc?

Apr 22, 2012

I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd

View 4 Replies View Related

Should Delete The System Reserve When Reformat

Feb 25, 2011

Is it safe to delete the system reserve partition when I reformat or just leave it as such. Few programs are corrupting my system settings and I need to do a clean install.

View 9 Replies View Related

Windows 7, System Reserve Disappeared

Dec 30, 2012

I installed Windows 7 home premium fresh on my brand new WD Cav Blk HDD. During the installation, I created a "new" partition called system reserve which is 100MB.Once my system was set up and Win 7 running, I checked under My computer and noticed that there is no system reserve there. How can it have vanished?

View 3 Replies View Related

Deleted System Reserve, Stuck, Can't Boot

Sep 19, 2011

I wasnt thinking and deleted the system reserve partition when formating to windows 7. Now I cannot boot at all. It is an asus laptop. It is stuck on the Asus screen and nothing happens. I cannot even go into the bios, nor can it read the harddrive or dvd drive or usb.

View 9 Replies View Related

Converting From A Basic Disc To Dynamic

Sep 19, 2012

I have been reading up on it from microsofts site as well as various places throughout the web. most articles were also a few years old might have been before windows 7 was even released.from what I understand you will only really have an issue if you are using windows 98, 2000 , xp and server 2003.What I am trying to do is make a partition but the only way to do it so it seems (I am using the admin disk management tool)is to convert to dynamic.I am creating the partition to install a small linux distro to use in dual boot but the part that is making me weary is the last step of the disk management tool says "the operation you selected will convert the selected basic disk(s) to dynamic disc(s). If you convert the disk(s) to dynamic you will not be able to start installed operating systems from any volume on the disk(s)(except the current boot volume.now I will (hopefully) never have to deal with those headaches called OS's again. So would I have any negative impact from this conversion? would i still be able to boot windows 7 with all of my data still intact?

View 8 Replies View Related

How To Change From Dynamic To Basic Disc

Jun 12, 2011

i have a acer laptop having 500 gb hd. Isince i want to dual boot ubuntu with windows 7 i was planning to install it on Local Disk F so i shrink the Drive F for swap area required for ubuntu. I shrink it to 4500MB and new partition was created showing 4.5GB of space. Then i right click on it to create new volume. I keep on clicking next till a warning came.I click ok to that and my whole disk got converted to Dynamic disk. Now my problem is that my os is still booting even after converting to dynamic . I dont know how.
Since i have only one hd how can i use Partion wizard since i can't unallocate the whole HD.

View 9 Replies View Related

Convert Dynamic To Basic Disc

Apr 22, 2012

I wanted to make a new partition on my hp laptop on the only disc it hasso as to create a system image.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly. As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd)

View 1 Replies View Related

Changed Windows 7 OS Disc To Dynamic - How To Revert

Dec 3, 2011

By mistake I changed Win7 OS disc to dynamic. How could I change it back to basic or format my hhd from CD/USB.

View 1 Replies View Related

Move System Reserve Partition To System Partition C:

Jun 28, 2012

Through a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).

In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.

I'd like to

1) move/create the System Reserve partition to Disk 1 (with System C: drive)

2) remove the System Reserve partition from Disk 0 to free it all up as a data drive

Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?

View 9 Replies View Related

Change Dynamic System Partition To Basic?

Aug 13, 2012

i got only one disk and all of the partitions are dynamic i have low space on the system files partition so i decided to extend the partition i deleted a partition and had an unallocated space but i couldnt extend the the system partition i tried to install windows but it couldnt install on a dynamic disk

View 2 Replies View Related

Reinstalling Windows 7 On A System With Dynamic Disks With No Install DVD?

Jan 15, 2011

I have a custom built HTPC running Windows7 Home Premium 64 bit that I bought from a tin-pot PC building firm last year. It has 4 physical drives in it. The first is configured as a "basic disk" with a single C: drive partition on which windows 7 is installed. The other three are configured as a RAID1 "dynamic disk" that present themselves in Windows as a single logical drive (E:) and that's where all my data lives.Windows Media Centre has now stopped working properly and I've tried everything to fix it, in case I can avoid a reinstall! mcupdate.exe always crashes(with System.IO.FileNotFoundException): I can't update TV signal set-up or guide data ) so now I need to reinstall windows. I'm an IT professional and I've installed many prior versions of windows in the past, but never Windows 7:

1) If I reinstall Windows 7 on my C:/ drive, will the E: drive be left unaffected and the fresh install of windows will still be able to see the E: drive and access all the data on it without any permissions issues?

2) The company that I bought the HTPC from neglected to give me a DVD with the Windows 7 installer (and prod key) on and they went out of business a few months ago, so I'm feeling a bit stuck. I've used a free tool to extract my Windows 7 product key from the registry, and borrowed a Windows 7 DVD from a friend. Will reinstalling from this DVD with the product key I've extracted work, or is the product key tied to the physical DVD (or does it just need to pass a checksum algorithm?) If I use my product key to reinstall, will I also be able to re"activate" Windows 7 or will it now think it's a dodgy copy? My current install says it's an OEM version (when I tried to get support from MS.com), but my friend's DVD is a full retail one - is that a problem too? What options do I have here? Can I, for example, create a copy of my friend's DVD and amend the prod-key in the poduct.ini file to be mine in the "HomePremium=" entry?

3) Before I attempt anything, I'm keen to do a full system backup. I've done this with the Windows 7 system image tool and have a 154 GB file that I've copied to an external USB hard drive, and I'm going to create a restore boot "disk" on a CD. However, If I need to do a restore, can the restore app read from a USB HD or not? I assume it can't read from the dynamic disk E: drive? Or can I just keep it on the C: drive, or will this get wiped completely when I reinstall windows, thus losing the image file?

View 9 Replies View Related

Cannot Create A System Restore Disc(s) (Cannot Do A System Recovery)

Mar 21, 2011

I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?

Computer Specs:

Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC

edit: This notebook came with a Recovery Partition built in.

View 4 Replies View Related

"Dynamic Disk Are Not Supported By This Operating System Or Server Configuration"

Aug 11, 2012

i wanna divide the 'C' ,i used the "New simple volume wizard " after pressing finish i got the msg The operation you selected will convert the selected basic disk to dynamic disk. if you convert the disk t dynamic , you will not be able to start installed operating systems from any volume on the disk (except the current boot volume). are you sure ? when i press yes i got error msg "Dynamic disk are not supported by this operating system or server configuration . dynamic disk are not supported on clusters.

View 1 Replies View Related

Dynamic Disk To Basic Disk When Windows 7 Is Installed On Dynamic Disk

Mar 13, 2011

so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?

View 1 Replies View Related

System Recovery Without A Disc?

Jun 1, 2012

How can I do a system recovery without a disc ?In my drive D , there is something called " recovery " I guess it is a partition .But when I open up recovery manager , It asked me to insert a disc .

View 5 Replies View Related

Can't Delete System Files On Second Disc

Apr 3, 2011

I had an old P4 system that the PSU went out on, so while I was at the store getting a new PSU, I picked up a copy of Win7 also. Put the PSU and Win7 in and the next day, the Motherboard died. Went and bought a new i-core motherboard, processor, memory and video card and put it together using two drives. The one Sata drive from the old system is a 1T that has the Win7 from the other system on it along with about 75 movies, 500 pictures and 1500 songs. I used a 250 gig SATA to load the Win7 onto the new system. So now the new system is running off the 250gig and all my files are on the 1T drive along with the old Win7 folder. I want to delet the old Win7 folder but it won't let me giving me a message saying I need permission from a trusted installer to remove these files.

View 2 Replies View Related

Create System Repair Disc?

Dec 17, 2011

when trying to create a system repair disc, i get the following message: system repair disc could not be created, the parameter is incorrect (Ox80070057)

View 2 Replies View Related

Cannot Create System Repair Disc

Dec 31, 2011

Known good cd drive & dvd drive installed in my pc.Tried discs separately in each drive three ways.Have tried Search box typing recdisc.exe.Have tried going through Control Panel to reach the part to create repair disc.Have tried using an elevated prompt & then typing recdisc."System repair disc could not be created. The parameter is incorrect. (0x80070057)."

View 5 Replies View Related

Can I Create A System Boot Disc

Jan 18, 2013

The disc I had received complementary is unfortunately, broken. Can I create a system boot disc? so that I can format my computer when my heart desires.

View 2 Replies View Related

System Repair Disc Not Functioning

Jul 17, 2010

I bootcamped my Macbook Pro 15" (2010) model and installed Windows 7 within a 40GB partition. Shortly after I ran out of space and needed to upgrade my partition. So I created a system repair disc and created a system image. Then I rebootcamped and installed Windows 7 on an 80GB partition. Before I reinstalled and repartitioned my hdd, I booted from my system repair disc to check for functionality. It worked fine and allowed my the option of checking or unchecking the box that reads "Format and repartition discs". Now that I've reinstalled windows 7 AND all the apple drivers using my OS X disc, when I boot from the system repair CD and follow the steps, I cannot uncheck the box asking to format all discs. I can't do this obviously because it would format the entire hdd and delete my OS X partition which has all my stuff backed up on and has all of my data.

View 2 Replies View Related

How To Create System Repair Disc

Aug 30, 2012

hey how do u create a system repair disc?

View 1 Replies View Related

System Repair Disc - Create

Jan 15, 2009

How to Create a Windows 7 System Repair Disc ?

View 0 Replies View Related

Bootable System Restore Disc?

Aug 13, 2012

My old computer I know had a partition with some bootable software where you could boot into it and it would then copy Windows back from a restore if you had a problem It was called like PCAngel or something I can't remember the exact name and can't find it But I'm looking for a bootable sort of software that I can store on the last partition of my HDD on my laptop and have an additional partition for storing system images. Like on the backup and restore thing on W7 you can make a"system repair disc", is there a way to make a restore disc but instead store it on a bootable partition? Basically I want to just store a system image on a seperate partition and leave it alone then some way on the computer to also be able to overwrite my old windows OS with this new clean system image whenever I want, without external discs or anything. I want it to work even if my disk drive and USB ports stop working, that's the important part

View 3 Replies View Related

Create System Recovery Disc On A Different Computer?

Jun 29, 2011

My Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?

View 2 Replies View Related

Can Reinstall Windows 7 With Just The System Repair Disc

Oct 10, 2011

Got my stuff ready to reformat, only to realize I don't have a Windows 7 recovery disc.I created a System Repair Disc using Backup & Restore in control panel but I'm unsure whether this is what I need to do a complete reinstall?I wanted to follow this guide to do a complete reformat, not a recovery.

View 2 Replies View Related

Any Downside To Creating A System Repair Disc?

Sep 14, 2010

Is there any downside to creating a system repair disc (is this the same as a recovery disc?). I have a disc with the operating system that came with the computer but this wouldn't restore the computer after a crash without going through other operations such as hard disk partitioning etc.

View 9 Replies View Related

Create A System Repair Disc Without CD-ROM Drive?

Jan 26, 2012

i have a Sony Vaio laptop with windows 7 home premium 32bits and i wanted to create a system repair disc with the windows 7 tools but this laptop has no CDDVD drive so obviously the tool gives an error asking for one to be pluged in...o the question is, is there any other way to create a system repair disc or do i need to get an external cddvd drive?EDIT: forgot to say, the point is so i can create an image of the system repair disc so i can put it on an USB drive

View 4 Replies View Related

HD Imminent Failure - HP System Repair Disc

May 27, 2012

Have a HP desktop PC that is acting flaky (a small percentage of the time it hangs), but keeps generating msgs about the HD Imminent Failure. Also has corrupted some files I had. I did run ChkDsk, and it came back with the same message, after several hours of checking. So, I have backed up everything I could, but would at least try to fix if at all possible. Guess some of the sectors are now bad. Have a single CD that came with PC (about 3 yrs old now) that is labeled "HP System Repair Disc", Windows 7, 64 Bit.Would like to at least try it.

When opened, it has the following:
Files on the Disc:
- Boot
- Sources
- Boot Mgr.
To Be Written To Disc:
- Desktop

Is there anything herein that might correct the bad Sectors, or any other HD problem that is software and not hardware related?

View 3 Replies View Related

Windows 7 Won't Load And System Repair Disc Won't Run?

Jul 26, 2012

I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command prompt doesn't work either.

View 9 Replies View Related

Windows 7 Ultimate System Recovery Disc?

Nov 21, 2012

Can i still use the CD that came with the motherboard to install Windows 7 if i change my ssd and CPU?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved